Pages in category "Papers"
The following 200 pages are in this category, out of 699 total.
(previous page) (next page)3
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printed click-MUAC bands
- 3D printed click-MUAC bands/zh
- 3D printed dual axis gimbal system
- 3D printed dual axis gimbal system/ru
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3D Printed SiOC(N) Ceramic Scaffolds for Bone Tissue Regeneration: Improved Osteogenic Differentiation of Human Bone Marrow‐Derived Mesenchymal Stem Cells
- 3D printed solar photovoltaic racking
- 3D printed solar photovoltaic racking/de
- 3D printed solar photovoltaic racking/es
- 3D printed solar photovoltaic racking/ru
- 3D printed solar photovoltaic racking/zh
A
- A Case for Weakening Patent Rights
- A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics
- A Free and open-source microgrid optimization tool: SAMA the Solar Alone Multi-Objective Advisor
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A new model for enabling innovation in appropriate technology for sustainable development
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- A novel camera-based sensor for real-time wastewater quality monitoring
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- A Review of 3D Printing Batteries
- A Review of 3D Printing Batteries/ru
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages
- A review of open source ventilators for COVID-19 and future pandemics
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
- A Review of the Effects of Haze on Solar Photovoltaic Performance
- A review of the value of solar methodology with a case study of the U.S. VOS
- A review of the value of solar methodology with a case study of the U.S. VOS/tr
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
- AC off-grid photovoltaic powered open-source ball mill
- Achieving 100% Renewable and Self-Sufficient Electricity in Impoverished, Rural, Northern Climates: Case Studies from Upper Michigan, USA
- Adapting the European typology approach for building stock energy assessment (TABULA) concept for the developing world: The Nigerian case study
- Adapting the European typology approach for building stock energy assessment (TABULA) concept for the developing world: The Nigerian case study/ru
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone/th
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices
- Advancing Agrivoltaics within the U.S. Legal Framework: A Multidimensional Assessment of Barriers & Opportunities
- Agrivoltaic potential on grape farms in India
- Agrivoltaics in Ontario Canada: Promise and Policy
- Aligning executive incentives with global public health goals
- Alternative Foods as a Solution to Global Food Supply Catastrophes
- Alternative Foods as a Solution to Global Food Supply Catastrophes/es
- Alternative Foods as a Solution to Global Food Supply Catastrophes/zh
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source 3-D Printing on Small Farms/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applications of Open Source GMAW-Based Metal 3-D Printing/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing/it
- Applications of Open Source GMAW-Based Metal 3-D Printing/zh
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations/ru
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture/vi
- Are You Ready?
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
- Automated quantification of solar photovoltaic potential in cities
B
- Ballast-Supported Foundation Designs for DIY Low-Cost Open-Source Solar Photovoltaic Racking Systems
- Ballast-Supported Foundation Designs for DIY Low-Cost Open-Source Solar Photovoltaic Racking Systems/es
- Barriers to Appropriate Technology Growth in Sustainable Development
- Barriers to Appropriate Technology Growth in Sustainable Development/id
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components/es
- Biltong (Practical Action Brief)
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
- Building Open Source Hardware in Academia
- Building Open Source Hardware in Academia/zh
- Building research equipment with free, open-source hardware
- Building research equipment with free, open-source hardware/es
- Building research equipment with free, open-source hardware/ru
- Business Models for Open Source Hardware Repositories
C
- Can grid-tied solar photovoltaics lead to residential heating electrification? A techno-economic case study in the midwestern U.S.
- Canadian professors' views on establishing open source endowed professorships
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing/it
- Conceptual Design and Rationale for a New Agrivoltaics Concept: Pasture-Raised Rabbits and Solar Farming
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response/ko
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/es
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/zh
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally
- Could 79 People Solarize the U.S. Electric Grid?
D
- Decarbonizing rural residential buildings in cold climates: A techno-economic analysis of heating electrification
- Decarbonizing rural residential buildings in cold climates: A techno-economic analysis of heating electrification/ru
- Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives
- Decentralized Renewable Hybrid Mini-Grids for Rural Communities: Culmination of the IREP Framework and Scale up to Urban Communities
- Decreasing turbidity to optimize solar water disinfection
- Decreasing turbidity to optimize solar water disinfection/ko
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Demonstration of a simple encapsulation technique for prototype silicon solar cells
- Demonstration of a simple encapsulation technique for prototype silicon solar cells/fr
- Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria
- Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria/ar
- Design and Implementation of 3-D Printed Radiation Shields for Environmental Sensors
- Design and implementation of mobile educational games
- Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites
- Design of a low-cost mobile multispectral albedometer with geopositioning and absolute orientation
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions
- Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Detecting Covert Legal Killing to Stop A New Approach to Terrorist Intention
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/fr
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/ru
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/zh
- Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules
- Distributed Manufacturing for Distributed Generation: 3-D Printed Solar Photovoltaic Module Mounting Mechanisms for Wood Racking
- Distributed manufacturing of after market flexible floating photovoltaic modules
- Distributed Manufacturing of an Open-Source Tourniquet Testing System
- Distributed Manufacturing of an Open-Source Tourniquet Testing System/uk
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
- Distributed recycling of post-consumer plastic waste in rural areas/fr
- Do agrivoltaics improve public support for solar? A survey on perceptions, preferences, and priorities
- Do Universities Investing in Technology Transfer via Patenting Lose Money?
- Dual morphology titanium dioxide for dye sensitized solar cells
- Dye-sensitized solar cells as promising candidates for underwater photovoltaic applications
E
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
- Economic Efficiency of an Open-Source National Medical Lab Software in Canada
- Economic Impact of DIY Home Manufacturing of Consumer Products with Low-cost 3D Printing from Free and Open Source Designs
- Economic Impact of DIY Home Manufacturing of Consumer Products with Low-cost 3D Printing from Free and Open Source Designs/zh
- Economic impact of substituting solar photovoltaic electric production for tobacco farming
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Economic Savings for Scientific Free and Open Source Technology: A Review
- Economic viability of captive off-grid solar photovoltaic and diesel hybrid energy systems for the Nigerian private sector
- Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada
- Educational Pathways to Remote Employment in Isolated Communities
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon
- Effects of spectral albedo on solar photovoltaic devices
- Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems
- Energy Conservation with Open Source Ad Blockers
- Energy Conservation with Open Source Ad Blockers/ar
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System/tr
- Energy Policy for Agrivoltaics in Alberta Canada
- Energy Policy for Agrivoltaics in Alberta Canada/ru
- Energy Policy for Energy Sovereignty: Can policy tools enhance energy sovereignty?
- Enhanced Dye-Sensitized Solar Cell Performance using Strontium Titanate Perovskite Integrated Photoanodes Modified with Plasmonic Silver Nanoparticles
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Enriched second-harmonic generation in meta-phase barium titanate nanostructures synthesized by sol-gel hydrothermal method
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products/pt
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products/es
- Environmental Life Cycle Analysis of Manufacturing Options for Humanitarian Supplies: Drinking water containers
- Environmental remediation of real textile dyeing wastewater under visible light and inactivation of pathogenic bacteria using ZnO\CuO nano-needles
- Equitable Research Capacity Towards the Sustainable Development Goals: The Case for Open Science Hardware
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament/fr
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Evaluation of water quality and heavy metal contamination in Cauvery River: Tamil Nadu region India
- Examining interconnection and net metering policy for distributed generation in the United States
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics
- Expanded microchannel heat exchanger
- Expanded Microchannel Heat Exchanger: Finite Difference Modeling
- Expanded microchannel heat exchanger: Non-destructive evaluation
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Fabrication of Bimetallic Inlaid Working Electrode for Highly Efficient Dye Sensitized Solar Cells
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Feeding Everyone if Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled/es
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun/ru
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- Finite Difference Heat Exchanger Model: Flow Maldistribution with Thermal Coupling
- Foam-based floatovoltaics: A potential solution to disappearing terminal natural lakes
- Food without sun: Price and life-saving potential
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD/es
- Free and open-source automated 3-D microscope
- Free and open-source automated 3-D microscope/es
- Free and open-source automated 3-D microscope/fr
- Free and open-source automated 3-D microscope/ru
- Free and open-source automated 3-D microscope/zh