Technical, Economic and Environmental Potential of Recycled Polycarbonate Solar Photovoltaic Frames

▼Western University's Free Appropriate Sustainability Technology (FAST) Research Group

Wanted! Students to make a distributed future with solar-powered open-source 3-D printing and recycling. Contact Dr. Joshua Pearce - Apply here
Home · Projects & Publications · Methods · Literature reviews · People · Sponsors · News · Free Software · Twitter/X · YouTube · LinkedIn · Github · For kids!

Solar photovoltaic (PV) devices have excellent ecological footprints, but a substantial amount of embodied energy is due to their standard aluminum frames. Recycled polycarbonate (PC) has a high strength-to-weight ratio and superior resistance to corrosion, which makes it an attractive substitute for aluminum in the construction of PV module frames. This study investigates the feasibility of using virgin and recycled PC for PV module frames by 1) conducting finite element analysis to optimize dimensional designs of PC frames, ensuring sufficient structural strength and minimizing potential deformation while minimizing the weight; 2) performing materials economic analysis on that PC frames to compare them to Al and 3) a basic life cycle analysis to compare the environmental performance of the two frame materials. Two frame profiles are evaluated: downward fastened and C-shaped. Results show the use of lower-mass PC frames could enable installations that might otherwise be unfeasible due to necessary roof structural reinforcement. PC downward fastened frames are also less expensive than aluminum frames. The environmental impact results show recycled Al and recycled PC significantly outperform primary aluminum. Recycled polycarbonate, provides the most substantial reductions in both cumulative energy demand and carbon footprint, with nearly complete elimination of carbon emissions.

▼Pearce publications

FAST · MOST · QAS

Agrivoltaics · Energy Conservation · Energy Policy · Floatovoltaivs · Industrial Symbiosis · Life Cycle Analysis · Materials Science · Medical · Open Source · Photovoltaic Systems · Resilient Food · Solar Cells · Sustainable Development · Sustainability Education · Water

Energy, Materials, photovoltaics, renewable, solar, sustainability, Open-source, Photovoltaic, mechanical design, renewable energy, recycling, environmental impact

• Mechanical and economic analysis of conventional aluminum photovoltaic module frames, frames with side holes, and open-source downward-fastened frames for non-traditional racking
• To Catch the Sun
• 3-D printable photovoltaic module spacer
• Open source DIY solar photovoltaic racking
• ---
• Open-source distributed production of polycarbonate solar photovoltaic modules designed for disassembly
• Circular PV panel

• Ground-mounted
• 
  3-D Printing Solar Photovoltaic Racking in Developing World
• 
  Open-Source Vertical Swinging Wood-Based Solar Photovoltaic Racking Systems
• 
  Vertical Free-Swinging Photovoltaic Racking Energy Modelling: A Novel Approach to Agrivoltaics
• 
  Impacts of Location on Designs and Economics of DIY Low-Cost Fixed-Tilt Open Source Wood Solar Photovoltaic Racking
• 
  Open-Source Design and Economics of Manual Variable-Tilt Angle DIY Wood-Based Solar Photovoltaic Racking System
• 
  Low-cost pole and wire photovoltaic racking
• 
  Parametric Open Source Cold-Frame Agrivoltaic Systems
• 
  The potential for fencing to be used as low-cost solar photovoltaic racking
• 
  Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases
• 
  Open-source Photovoltaic - Electrical Vehicle Carport Designs
• 
  Geographical Dependence of Open Hardware Optimization: Case Study of Solar Photovoltaic Racking
• 
  Solar photovoltaic wood racking mechanical design for trellis-based agrivoltaics
• 
  Wood and Cable-Based Variable Tilt Stilt-Mounted Solar Photovoltaic Racking System
• 
  Ballast-Supported Foundation Designs for DIY Low-Cost Open-Source Solar Photovoltaic Racking Systems
• 
  Distributed Manufacturing for Distributed Generation: 3-D Printed Solar Photovoltaic Module Mounting Mechanisms for Wood Racking
• 
  Mechanical and economic analysis of conventional aluminum photovoltaic module frames, frames with side holes, and open-source downward-fastened frames for non-traditional racking
• 
  Technical, Economic and Environmental Potential of Recycled Polycarbonate Solar Photovoltaic Frames

• Roof-mounted
• 
  Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
• 
  Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
• 
  Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems

• FPV
• 
  Distributed manufacturing of after market flexible floating photovoltaic modules
• 
  Experimental integration of a foam-based floating photovoltaic (floatovoltaic) system with an anion exchange membrane electrolyzer for 5 kW-Scale green hydrogen production
• 
  The Greenest Solar Power? Life Cycle Assessment of Foam-Based Flexible Floatovoltaics
• 
  Foam-based floatovoltaics: A potential solution to disappearing terminal natural lakes
• 
  Design and Performance Analysis of Foam-Based Floating Photovoltaic Systems in Winter Climates: Case Study of an Experimental 7kW Floatovoltaics in Canada

• Circular PV
• 
  Open-source distributed production of polycarbonate solar photovoltaic modules designed for disassembly