This category lists completed projects for the Category:MOST. Following the individual links leads to a summary of the project and key findings, related literature reviews, methods, protocols, and equipment, and an open access version of the paper published in a peer reviewed journal.
2021 Completed Projects & Publications[edit | edit source]
2021 Popular Audience Articles[edit | edit source]
2020 Completed Projects & Publications[edit | edit source]
2020 Popular Audience Articles[edit | edit source]
2019 Completed Projects & Publications[edit | edit source]
2019 Popular Audience Articles[edit | edit source]
2018 Completed Projects & Publications[edit | edit source]
2018 Popular Audience Articles[edit | edit source]
2017 Completed Projects & Publications[edit | edit source]
2017 Popular Audience Articles[edit | edit source]
2016 Completed Projects and Publications[edit | edit source]
2016 Popular Audience Articles[edit | edit source]
![[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]](/w/images/5/59/Hardwarex.gif)
[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]
![[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]](/File:Hardwarex.gif)
![Earth Day 2016: Why George W. Bush gives me hope for the future of the planet[1]](/File:Bushpaint.png)
![Potential Effects of Sci-Hub on Academic Publishing,[2]](/File:Sci-hubmodel.png)
![Building Your Own Home From Open Source Blocks[3]](/File:OBI.png)
![[Practical Laboratory Automation Forward]](/File:PLAautoit.jpg)
2015 Completed Projects and Publications[edit | edit source]
2015 Popular Audience Articles[edit | edit source]
2014 Completed Projects and Publications[edit | edit source]
2013 Completed Projects and Publications[edit | edit source]
2011-2012 Completed Projects and Publications[edit | edit source]
Subcategories
This category has the following 2 subcategories, out of 2 total.
O
R
Pages in category "MOST completed projects and publications"
The following 200 pages are in this category, out of 297 total.
(previous page) (next page)3
- 3-D printable categorized
- 3D printable OSAT gallery 1
- 3D printable OSAT gallery 2
- 3D printable OSAT gallery 3
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printed click-MUAC bands
- 3D printed dual axis gimbal system
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3D printed photovoltaic module spacer
- 3D printed solar photovoltaic racking
A
- A Case for Weakening Patent Rights
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A new model for enabling innovation in appropriate technology for sustainable development
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- A review of open source ventilators for COVID-19 and future pandemics
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
- A review of the value of solar methodology with a case study of the U.S. VOS
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices
- Aligning executive incentives with global public health goals
- ALLFED
- Template:Alt-food
- Alternative Foods as a Solution to Global Food Supply Catastrophes
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
- Automated quantification of solar photovoltaic potential in cities
B
- Barriers to Appropriate Technology Growth in Sustainable Development
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
- Building Open Source Hardware in Academia
- Building research equipment with free, open-source hardware
C
- Characteristics of self-assembled ultrathin Nafion films
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
- Corn sheller
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally
- Could 79 People Solarize the U.S. Electric Grid?
- Código abierto Impresora 3-D para Metales
D
- Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives
- Decreasing turbidity to optimize solar water disinfection
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Demonstration of a simple encapsulation technique for prototype silicon solar cells
- Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions
- Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Detecting Covert Legal Killing to Stop A New Approach to Terrorist Intention
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules
- Distributed manufacturing of after market flexible floating photovoltaic modules
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
- Dual morphology titanium dioxide for dye sensitized solar cells
E
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
- Economic impact of substituting solar photovoltaic electric production for tobacco farming
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada
- Educational Pathways to Remote Employment in Isolated Communities
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon
- Effects of spectral albedo on solar photovoltaic devices
- Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Feeding Everyone if Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- FitWorld board game
- Food without sun: Price and life-saving potential
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and open-source automated 3-D microscope
- Free and Open-source Control Software for 3-D Motion and Processing
- From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
G
- General Design Procedure for Free and Open-Source Hardware for Scientific Equipment
- General Design Procedures for Airport-Based Solar Photovoltaic Systems
- Global distribution of forest classes and leaf biomass for use as alternative foods to minimize malnutrition
- Global value chains from a 3D printing perspective
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing
H
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development
- How Easy is it to Feed Everyone? Economic Alternatives to Eliminate Human Nutrition Deficits
- How to perform a literature review with free and open source software
- Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings
I
- Image Analysis Method for Quantifying Snow Losses on PV Systems
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
- Improving recyclebot concepts
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
- Innovation through collaboration: scaling up solutions for sustainable development
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply
- It Is Time to Move Research Expenditures to the Denominator in University Metrics
L
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems
- Leveraging Intellectual Property to Prevent Nuclear War
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Limitations of nuclear power as a sustainable energy source
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices
- Limiting liability with positioning to minimize negative health effects of cellular phone towers
- Long term cost-effectiveness of resilient foods for global catastrophes compared to artificial general intelligence safety
- Long-term cost-effectiveness of interventions for loss of electricity/industry compared to artificial general intelligence safety
- Low-cost open source ultrasound-sensing based navigational support for visually impaired
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing
M
- MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto
- Maximizing Returns for Public Funding of Medical Research with Open-source Hardware
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites
- Methane Single Cell Protein: securing protein supply during global food catastrophes
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon
- Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations
- Micronutrient Availability in Alternative Foods During Agricultural Catastrophes
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities
- MOST News
- MOST News Coverage 2015
- MOST News Coverage 2016
- MOST News Coverage 2017
- MOST News Coverage 2019
- MOST News Coverage 2020/Part II
- Template:MOST-recycle
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation
N
O
- Open solar photovoltaic systems optimization
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines
- Open Source 3-D Printed Nutating Mixer
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities
- Open source 3-D printing of OSAT
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities
- Open Source 3D-Printable Planetary Roller Screw for Food Processing Applications
- Open Source Arc Analyzer: Multi-Sensor Monitoring of Wire Arc Additive Manufacturing
- Open Source Completely 3-D Printable Centrifuge
- Open Source Computer Vision-based Layer-wise 3D Printing Analysis
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain
- Open Source Digitally Replicable Lab-Grade Scales
- Open source disease analysis system of cactus by artificial intelligence and image processing
- Open Source High-Temperature Reprap for 3-D Printing Heat-Sterilizable PPE and Other Applications
- Open Source Laboratory Sample Rotator Mixer and Shaker
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds
- Open Source Low-Cost Power Monitoring System
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing
- Open source nanotechnology
- Open source research in sustainability
- Open Source Software Toolchain for Automated Non-Targeted Screening for Toxins in Alternative Foods
- Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass
- Open Source Waste Plastic Granulator
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem
- Open-source 3-D Printing in Managing Humanitarian Innovation
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom
- Open-source 3D-printable optics equipment
- Open-Source Automated Mapping Four-Point Probe
- Open-source colorimeter
- Open-source development of solar photovoltaic technology
- Open-Source Grinding Machine for Compression Screw Manufacturing
- Open-source hardware for research and education
- Open-source hardware for science in Ecuador