This category lists completed projects for the Category:MOST. Following the individual links leads to a summary of the project and key findings, related literature reviews, methods, protocols, and equipment, and an open access version of the paper published in a peer reviewed journal.
2021 Completed Projects & Publications
2021 Popular Audience Articles
2020 Completed Projects & Publications
2020 Popular Audience Articles
2019 Completed Projects & Publications
2019 Popular Audience Articles
2018 Completed Projects & Publications
2018 Popular Audience Articles
2017 Completed Projects & Publications
2017 Popular Audience Articles
2016 Completed Projects and Publications
2016 Popular Audience Articles
-
-
![[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]](/w/images/5/59/Hardwarex.gif)
[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]
-
-
![Earth Day 2016: Why George W. Bush gives me hope for the future of the planet[1]](/w/images/thumb/d/d1/Bushpaint.png/162px-Bushpaint.png)
-
-
-
![Potential Effects of Sci-Hub on Academic Publishing,[2]](/w/images/thumb/9/9d/Sci-hubmodel.png/183px-Sci-hubmodel.png)
-
-
-
![Building Your Own Home From Open Source Blocks[3]](/w/images/thumb/b/b9/OBI.png/302px-OBI.png)
-
-
-
-
-
-
-
![[Practical Laboratory Automation Forward]](/w/images/thumb/4/4a/PLAautoit.jpg/136px-PLAautoit.jpg)
-
-
-
-
![[hhttps://web.archive.org/web/20201028204738/https://www.journals.elsevier.com/hardwarex/news/greetings-from-the-editor-in-chief-of-hardwarex Greetings from the Editor-in-Chief of HardwareX]](/File:Hardwarex.gif)
![Earth Day 2016: Why George W. Bush gives me hope for the future of the planet[1]](/File:Bushpaint.png)
![Potential Effects of Sci-Hub on Academic Publishing,[2]](/File:Sci-hubmodel.png)
![Building Your Own Home From Open Source Blocks[3]](/File:OBI.png)
![[Practical Laboratory Automation Forward]](/File:PLAautoit.jpg)
2015 Completed Projects and Publications
2015 Popular Audience Articles
2014 Completed Projects and Publications
2013 Completed Projects and Publications
2011-2012 Completed Projects and Publications
Subcategories
This category has only the following subcategory.
O
Pages in category "MOST completed projects and publications"
The following 200 pages are in this category, out of 555 total.
(previous page) (next page)3
- 3D printable OSAT gallery
- 3D printable OSAT gallery/zh
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printed click-MUAC bands
- 3D printed click-MUAC bands/zh
- 3D printed dual axis gimbal system
- 3D printed dual axis gimbal system/ru
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3D printed photovoltaic module spacer
- 3D printed photovoltaic module spacer/es
- 3D printed solar photovoltaic racking
- 3D printed solar photovoltaic racking/de
- 3D printed solar photovoltaic racking/es
- 3D printed solar photovoltaic racking/ru
- 3D printed solar photovoltaic racking/zh
A
- A Case for Weakening Patent Rights
- A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A new model for enabling innovation in appropriate technology for sustainable development
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages
- A review of open source ventilators for COVID-19 and future pandemics
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
- A review of the value of solar methodology with a case study of the U.S. VOS
- A review of the value of solar methodology with a case study of the U.S. VOS/tr
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone/th
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices
- Agrivoltaic potential on grape farms in India
- Aligning executive incentives with global public health goals
- ALLFED
- ALLFED/es
- ALLFED/ru
- Template:Alt-food
- Alternative Foods as a Solution to Global Food Supply Catastrophes
- Alternative Foods as a Solution to Global Food Supply Catastrophes/es
- Alternative Foods as a Solution to Global Food Supply Catastrophes/zh
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source 3-D Printing on Small Farms/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applications of Open Source GMAW-Based Metal 3-D Printing/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing/it
- Applications of Open Source GMAW-Based Metal 3-D Printing/zh
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations/ru
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture/vi
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
- Automated quantification of solar photovoltaic potential in cities
B
- Barriers to Appropriate Technology Growth in Sustainable Development
- Barriers to Appropriate Technology Growth in Sustainable Development/id
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components/es
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
- Building Open Source Hardware in Academia
- Building Open Source Hardware in Academia/zh
- Building research equipment with free, open-source hardware
- Building research equipment with free, open-source hardware/es
- Building research equipment with free, open-source hardware/ru
C
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing/it
- Conceptual Design and Rationale for a New Agrivoltaics Concept: Pasture-Raised Rabbits and Solar Farming
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response/ko
- Corn sheller
- Corn sheller/cs
- Corn sheller/fr
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/es
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/zh
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally
- Could 79 People Solarize the U.S. Electric Grid?
- Código abierto Impresora 3-D para Metales
- Código abierto Impresora 3-D para Metales/fr
- Código abierto Impresora 3-D para Metales/pt
D
- Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives
- Decentralized Renewable Hybrid Mini-Grids for Rural Communities: Culmination of the IREP Framework and Scale up to Urban Communities
- Decreasing turbidity to optimize solar water disinfection
- Decreasing turbidity to optimize solar water disinfection/ko
- Defense for Covert Administrative Techniques for Neutralizing American Highly Qualified Personnel
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Demonstration of a simple encapsulation technique for prototype silicon solar cells
- Demonstration of a simple encapsulation technique for prototype silicon solar cells/fr
- Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria
- Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria/ar
- Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions
- Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Detecting Covert Legal Killing to Stop A New Approach to Terrorist Intention
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/fr
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/ru
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response/zh
- Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules
- Distributed manufacturing of after market flexible floating photovoltaic modules
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
- Distributed recycling of post-consumer plastic waste in rural areas/fr
- Dual morphology titanium dioxide for dye sensitized solar cells
E
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
- Economic impact of substituting solar photovoltaic electric production for tobacco farming
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Economic Savings for Scientific Free and Open Source Technology: A Review
- Economic viability of captive off-grid solar photovoltaic and diesel hybrid energy systems for the Nigerian private sector
- Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada
- Educational Pathways to Remote Employment in Isolated Communities
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon
- Effects of spectral albedo on solar photovoltaic devices
- Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products/pt
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament/fr
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Feeding Everyone if Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled/es
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun/ru
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- FitWorld board game
- Food without sun: Price and life-saving potential
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD/es
- Free and open-source automated 3-D microscope
- Free and open-source automated 3-D microscope/es
- Free and open-source automated 3-D microscope/fr
- Free and open-source automated 3-D microscope/ru
- Free and open-source automated 3-D microscope/zh
- Free and Open-source Control Software for 3-D Motion and Processing
- From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication
- From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication/es
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/es
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/fr
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/hu
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/ru
G
- General Design Procedure for Free and Open-Source Hardware for Scientific Equipment
- General Design Procedure for Free and Open-Source Hardware for Scientific Equipment/ar
- General Design Procedures for Airport-Based Solar Photovoltaic Systems
- Global distribution of forest classes and leaf biomass for use as alternative foods to minimize malnutrition
- Global distribution of forest classes and leaf biomass for use as alternative foods to minimize malnutrition/ru
- Global value chains from a 3D printing perspective
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing/fr
H
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding/ru
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development/fr
- How Easy is it to Feed Everyone? Economic Alternatives to Eliminate Human Nutrition Deficits
- How Easy is it to Feed Everyone? Economic Alternatives to Eliminate Human Nutrition Deficits/es
- How to perform a literature review with free and open source software
- How to perform a literature review with free and open source software/vi
- Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings
I
- Image Analysis Method for Quantifying Snow Losses on PV Systems
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical\Manufacturing Program
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
- Improving recyclebot concepts
- Improving recyclebot concepts/fr
- Improving recyclebot concepts/ru
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
- Innovation through collaboration: scaling up solutions for sustainable development