The following pages link to Category:FAST:
Displayed 50 items.
- Solar photovoltaic software (← links | edit)
- Solar photovoltaic ground mounting (← links | edit)
- How to make a figure to publish (← links | edit)
- Recyclebot (← links | edit)
- Save the planet board game (← links | edit)
- Pearce publications in solar photovoltaic device physics (← links | edit)
- Pearce publications in materials science and engineering (← links | edit)
- Pearce publications in solar photovoltaic systems (← links | edit)
- Pearce publications in open source (← links | edit)
- Pearce publications in energy conservation (← links | edit)
- Pearce publications in education for sustainability and green pedagogy (← links | edit)
- Pearce publications in industrial symbiosis (← links | edit)
- Pearce publications in life cycle analysis and net energy (← links | edit)
- Pearce publications in energy policy and sustainability policy (← links | edit)
- Pearce publications in sustainable development and open source appropriate technology (← links | edit)
- Dual use of land for PV farms and agriculture literature review (← links | edit)
- Pearce research group sponsors (← links | edit)
- Ground mount fixed tilt PV racking literature review (← links | edit)
- Open source bioreactors (← links | edit)
- Literature Review: Open Source Auto-Injector (← links | edit)
- Open Source 3-D Printed ISO 8655 Compliant Multichannel Pipette (← links | edit)
- Open source DIY solar photovoltaic racking (← links | edit)
- FAST (← links | edit)
- Free Appropriate Sustainability Technology (redirect page) (← links | edit)
- FAST application process (← links | edit)
- Decarbonizing rural residential buildings in cold climates: A techno-economic analysis of heating electrification (← links | edit)
- Life cycle assessment of pasture-based agrivoltaic systems: Emissions and energy use of integrated rabbit production (← links | edit)
- FAST News (← links | edit)
- FAST open access policy (← links | edit)
- FAST paper writing (← links | edit)
- FAST methods template (← links | edit)
- Fully dense SiOC(N) cellular structures by integrating FFF 3-D printing with polymer derived ceramics (← links | edit)
- Free Appropriate Sustainable Technology (redirect page) (← links | edit)
- Solar Photovoltaic Open Lectures (← links | edit)
- Open Source Appropriate Technology Literature Review (← links | edit)
- InGaN solar cells literature review (← links | edit)
- Curve fitting to a set of data (← links | edit)
- Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems/Literature review (← links | edit)
- Effects of snow on photovoltaic performance (← links | edit)
- Open source 3-D printing of OSAT (← links | edit)
- Amorphous silicon PVT (← links | edit)
- Renewable energy policy in the north (← links | edit)
- Technical feasibility of renewable electricity generation in Nunavut (← links | edit)
- Spectral effects on amorphous silicon photovoltaic cells literature review (← links | edit)
- Decreasing turbidity to optimize solar water disinfection (← links | edit)
- Decreasing turbidity to optimize solar water disinfection lit review (← links | edit)
- Low level concentration for PV applications literature review (← links | edit)
- Industrial symbiosis in photovoltaic manufacturing (← links | edit)
- Waste plastic extruder: literature review (← links | edit)
- Amorphous silicon degradation literature review (← links | edit)
- Open source solar spectrum project (← links | edit)
- Review of solar photovoltaic levelized cost of electricity (← links | edit)
- MOST first day (← links | edit)
- MOST paper writing (← links | edit)
- MOST tasks (← links | edit)
- MOST library (← links | edit)
- MOST guide to graduation (← links | edit)
- MOST courses (← links | edit)
- MOST last day (← links | edit)
- Technology for sustainable rural communities (← links | edit)
- MBE protocol:MOST (← links | edit)
- Open-source laser system for polymeric welding (← links | edit)
- Mechanical testing of polymer components made with the RepRap 3-D printer (← links | edit)
- Life cycle analysis of distributed polymer recycling (← links | edit)
- Life cycle analysis of polymer recycling literature review (← links | edit)
- MOST RepRap Build (← links | edit)
- Effects of spectral albedo on solar photovoltaic devices (← links | edit)
- Barriers to Appropriate Technology Growth in Sustainable Development (← links | edit)
- Development and feasibility of applications for the RepRap 3-D printer (← links | edit)
- Stand-alone solar photovoltaic powered high-speed wireless Internet access (← links | edit)
- Recyclebot v2.2 (← links | edit)
- Solar powered distributed customized manufacturing (← links | edit)
- Solar powered Internet literature review (← links | edit)
- Life cycle analysis software and databases (← links | edit)
- RepRap Mechanical Testing Literature Review (← links | edit)
- Small system photovoltaic design (← links | edit)
- Making thermocouples protocol: MOST (← links | edit)
- Tensile test protocol: MOST (← links | edit)
- SBDART protocol: MOST (← links | edit)
- Laser welding protocol: MOST (← links | edit)
- Recyclebot (← links | edit)
- InGaN photovoltaics literature review (← links | edit)
- Design guide for small-scale solar photovoltaic applications (← links | edit)
- InGaN based Light Emitting Diodes (LED) literature review (← links | edit)
- InGaN material characterization literature review (← links | edit)
- Nanocolumns\ Nanowires fabrication literature review (← links | edit)
- Optical modelling of thin film microstructures literature review (← links | edit)
- Wireless internet protocol: MOST (← links | edit)
- Guide to grow high quality nanowires (semiconductors) (← links | edit)
- Choice of crystal plane for InGaN opto-electonics applications (← links | edit)
- InGaN misc literature Review (← links | edit)
- Solar photovoltaic systems and trees literature review (← links | edit)
- PV economics: when to cut the grid literature review (← links | edit)
- Digital mass protocol:MOST (← links | edit)
- Spectrometer and light source calibration: MOST (← links | edit)
- RepRap PV system literature review (← links | edit)
- Life cycle analysis of semiconductor recycling in thin film photovoltaic manufacturing literature review (← links | edit)
- Open-source photoluminescence system (← links | edit)
- Smart solar shades literature review (← links | edit)
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells (← links | edit)
- Photoluminescence literature review (← links | edit)
- Open source cellulose insulation manufacturing (← links | edit)
- Life cycle analysis of semiconductor recycling in thin film photovoltaic manufacturing methods (← links | edit)
- Solar PV systems and trees methods (← links | edit)
- Solar powered internet methods (← links | edit)
- Life cycle analysis: MOST (← links | edit)
- Life cycle analysis tools (← links | edit)
- RepRap Prusa build: MOST (← links | edit)
- RepRap printing lessons learned: MOST (← links | edit)
- Michigan Tech Open Source Hardware Enterprise (← links | edit)
- Converting 2D images to 3D for printing using open source software (← links | edit)
- SEARC spectral project (← links | edit)
- Photovoltaic charging of ultracapacitors literature review (← links | edit)
- Photovoltaic charging of ultracapacitors (← links | edit)
- Ultracapacitors: MOST (← links | edit)
- Arduino installation (← links | edit)
- Open solar photovoltaic systems optimization (← links | edit)
- Open source science (← links | edit)
- Arduino use: MOST (← links | edit)
- Ellipsometry protocol: MOST (← links | edit)
- Open source science literature review (← links | edit)
- Recyclebot v2.3 (← links | edit)
- 3-D printing of electrically conductive materials literature review (← links | edit)
- MakerBot Replicator protocol:MOST (← links | edit)
- Expanded microchannel heat exchanger (← links | edit)
- Using LiDAR to assess rooftop solar photovoltaic potential on a large scale (← links | edit)
- Shading losses in solar photovoltaic potential at the municipal scale (← links | edit)
- Calibrated light source:MOST (← links | edit)
- Limitations of nuclear power as a sustainable energy source (← links | edit)
- Mobile Solar Powered 3D Printer V2.0 (← links | edit)
- Converting stl files to dualstrusions (← links | edit)
- Parametric automated filter wheel changer (← links | edit)
- Open-source lens holder (← links | edit)
- Open-source simple semiconductor sample holder (← links | edit)
- Open-source mirror mount (← links | edit)
- Open-source chopper wheel (← links | edit)
- Open-source optics base (← links | edit)
- XRD (X-ray Diffraction) protocol: MOST (← links | edit)
- Parametric empirical determination of PV short circuit current (← links | edit)
- Open-source fiber optic cable holder (← links | edit)
- Open-source lab jack (← links | edit)
- Open source research in sustainability (← links | edit)
- A new model for enabling innovation in appropriate technology for sustainable development (← links | edit)
- Plasmonic perfect meta-absobers for a-Si PV devices (← links | edit)
- Open-source development of solar photovoltaic technology (← links | edit)
- How to encrypt Gmail:MOST (← links | edit)
- How to convert 3D Studio to stl (← links | edit)
- Open-source environmental chamber (← links | edit)
- MOST student useful links (← links | edit)
- Effects of electric fields on amorphous silicon literature review (← links | edit)
- Building research equipment with free, open-source hardware (← links | edit)
- Spectruino protocol:MOST (← links | edit)
- RepRap printing protocol: MOST (← links | edit)
- Open-source optical rail (← links | edit)
- Atomic layer deposition literature review (← links | edit)
- Prediction of energy effects on photovoltaic systems due to snowfall events (← links | edit)
- Open-source turbidity analyzer (← links | edit)
- Benefits of photovoltaic energy conversion for Michigan (← links | edit)
- Open source nanotechnology (← links | edit)
- Toward renewable energy geo-information infrastructures: Applications of GIScience and remote sensing that can build institutional capacity (← links | edit)
- The Internet and other ICTs as tools and catalysts for sustainable development (← links | edit)
- MOST RepRap build (← links | edit)
- Hybrid photovoltaic-trigeneration systems (← links | edit)
- QE protocol:MOST (← links | edit)
- Life cycle analysis of silane recycling in amorphous silicon-based solar photovoltaic manufacturing (← links | edit)
- Open-source microcontrollers (← links | edit)
- Open-source polylactic acid production (← links | edit)
- Automated quantification of solar photovoltaic potential in cities (← links | edit)
- Bandgap engineering of multijunction photovoltaic cells for spectral albedo of natural surfaces (← links | edit)
- 3D printable PV components literature review (← links | edit)
- Design and implementation of mobile educational games (← links | edit)
- PVT dispatch strategy literature review (← links | edit)
- Open-source colorimeter (← links | edit)
- Effects of Snow on Photovoltaics - Literature Review (← links | edit)
- MOST HS RepRap user experience (← links | edit)
- Distributed recycling of post-consumer plastic waste in rural areas (← links | edit)
- MOST RepRap print server (← links | edit)
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules (← links | edit)
- Sample tracking:MOST (← links | edit)
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products (← links | edit)
- KRC data:MOST (← links | edit)
- The effect of spectral albedo on amorphous silicon and crystalline silicon solar photovoltaic device performance (← links | edit)
- Open-source 3D-printable optics equipment (← links | edit)
- Characteristics of self-assembled ultrathin Nafion films (← links | edit)
- MOST RepRap Primer/Parallel build overview (← links | edit)
- MOST RepRap Primer/Y carriage (← links | edit)
- MOST RepRap Primer/Frame (← links | edit)
- MOST RepRap Primer/X-axis (← links | edit)
- MOST RepRap Primer/Y-axis (← links | edit)
- MOST RepRap Primer/Extruder (← links | edit)
- MOST RepRap Primer/Z-axis (← links | edit)
- MOST RepRap Primer/Electronics (← links | edit)
- Atomic layer deposition:MOST (← links | edit)
- Focussed Ion beam (FIB) protocol: MOST (← links | edit)
- Wafer cleaning protocol:MOST (← links | edit)
- 3D printers for peace contest (← links | edit)
- Encryption method: MOST (← links | edit)
- Open-source nanotechnology: solutions to a modern intellectual property tragedy (← links | edit)
- Nephalometer literature review (← links | edit)
- Oscilloscope protocol: MOST (← links | edit)
- MOST RepRap Primer (← links | edit)
- MOST RepRap Primer/Firmware (← links | edit)
- MOST RepRap Primer/Bed (← links | edit)
- MOST RepRap Primer/Soldering (← links | edit)
- Blender animation protocol:MOST (← links | edit)
- MOST 3 Axis Stage (← links | edit)
- Field-based water quality testing equipment survey (← links | edit)
- RepRap on Debian:MOST (← links | edit)
- MOST HS animation (← links | edit)
- Fair trade standards (← links | edit)
- Roof-mounted photovoltaic rack system survey (← links | edit)
- Superior high performance computing: MOST (← links | edit)
- Self-adjustable glasses literature review (← links | edit)
- MOST RepRap mount extruder (← links | edit)
- Linear actuator:MOST (← links | edit)
- RepRap lead screw support issues:MOST (← links | edit)
- Recyclebot v3.0 (← links | edit)
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers (← links | edit)
- Characterizing GaN:MOST (← links | edit)
- Simple and low-cost method of planning for tree growth and lifetime effects on solar photovoltaic systems performance (← links | edit)
- E-beam Deposition protocol: MOST (← links | edit)
- Webcam setup Ubuntu:MOST (← links | edit)
- Potential groupsource websites for 3D printed tensile bars:MOST (← links | edit)
- Science funding in the U.S. literature review (← links | edit)
- Printer Calibration:MOST (← links | edit)
- Open-source Lab (← links | edit)
- 3-D printing of solar photovoltaic materials (← links | edit)
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices (← links | edit)
- Syringe pump literature review (← links | edit)
- The viability of nanotechnology-based bandgap engineering in solar photovoltaic devices for sustainable energy generation (← links | edit)
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products (← links | edit)
- Perkin-Elmer RF Sputtering System-6 Inch protocol: MOST (← links | edit)
- Four Point Resistivity and Conductivity Type Measurements protocol: MOST (← links | edit)
- Delta Build Overview:MOST (← links | edit)
- J-head Assembly:MOST (← links | edit)
- Assembling Delta Tie Rods:MOST (← links | edit)
- Delta Motor End Assembly:MOST (← links | edit)
- Delta Idler End:MOST (← links | edit)
- Assembling Delta:MOST (← links | edit)
- Figures of merit for GaN substrates (← links | edit)
- GNUPlot method: MOST (← links | edit)
- Assembling Delta Effector:MOST (← links | edit)
- Delta Extruder Drive Assembly:MOST (← links | edit)
- Soldering and Tinning:MOST (← links | edit)
- PLA properties (← links | edit)
- MOST Stage v1 (← links | edit)
- Open-source hardware for research and education (← links | edit)
- XRD rocking curve protocol (← links | edit)
- Backpack Delta (← links | edit)
- Backpack Delta BOM (← links | edit)
- Backpack Delta: Building the Lower Platform (← links | edit)
- Open-source metal 3-D printer (← links | edit)
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation (← links | edit)
- Delta Firmware:MOST (← links | edit)
- Delta calibration (← links | edit)
- Motor force protocol (← links | edit)
- Código abierto Impresora 3-D para Metales (← links | edit)
- Printer specific energy protocol:MOST (← links | edit)
- MOST open access policy (← links | edit)
- 3D Printing Basics:MOST (← links | edit)
- Orbital shaker literature review (← links | edit)
- Securitization of residential solar photovoltaic assets (← links | edit)
- Large scale plasmonic cell fabrication literature review (← links | edit)
- Open-source hardware for science in Ecuador (← links | edit)
- Solar Irradiation Data Sources (← links | edit)
- 3D printable science equipment (← links | edit)
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament (← links | edit)
- MOST Printer Log (← links | edit)
- Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems (← links | edit)
- Automated microscope stage literature review (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (← links | edit)
- Photovoltaic system performance enhancement with non-tracking planar concentrators: Experimental results and BDRF based modelling (← links | edit)
- Assembling PlanetaryGearbox:MOST (← links | edit)
- The effects of dispatch strategy on electrical performance of amorphous silicon-based solar photovoltaic-thermal systems (← links | edit)
- Innovation through collaboration: scaling up solutions for sustainable development (← links | edit)
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical\Manufacturing Program (← links | edit)
- Object oriented OpenSCAD (← links | edit)
- MOST quad delta RepRap (← links | edit)
- 3D printable science equipment page 2 (← links | edit)
- 3D printers education (← links | edit)
- Open-source scientific hardware gallery (← links | edit)
- 3D printer bed adhesion:MOST (← links | edit)
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics (← links | edit)
- MOST 3-D printer workshop preparation (← links | edit)
- Open-source mobile water quality testing platform (← links | edit)
- Backpack Delta: Building the Upper Platform (← links | edit)
- Backpack Delta: Building the Towers (← links | edit)
- Energy dispersive spectroscopy:MOST (← links | edit)
- Mechanical testing of 3D printed metal parts (← links | edit)
- Aluminum Iron Intermetallics (← links | edit)
- 3D Metal Printing P V Curve Literature Review (← links | edit)
- Solar water pasteurisation literature review (← links | edit)
- Liability for carbon emissions literature review (← links | edit)
- 3D printable science equipment page 3 (← links | edit)
- Dr. Frost UV spectroscopy unit protocol MOST (← links | edit)
- Dr. Hu solar simulator protocol: MOST (← links | edit)
- Open source test tube racks (← links | edit)
- Open source centrifuges (← links | edit)
- Open source microscope accessories (← links | edit)
- RepRap materials (← links | edit)
- Solar simulator calibration curve: MOST (← links | edit)
- 3D printable OSAT gallery (← links | edit)
- MOST open-source metal 3-D printer v2 (← links | edit)
- The RepRap 3-D Printer Revolution in STEM Education (← links | edit)
- Delta Epoxy Magnets:MOST (← links | edit)
- Delta Pilot Holes:MOST (← links | edit)
- MOST Mount Bases (← links | edit)
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan (← links | edit)
- Delta Vertical Boards:MOST (← links | edit)
- Delta Wiring:MOST (← links | edit)
- Corn sheller (← links | edit)
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development (← links | edit)
- Veusz: MOST (← links | edit)
- Delta Software:MOST (← links | edit)
- Requests for 3-D printable open source appropriate technology (← links | edit)
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype (← links | edit)
- Delta Build Workshop (← links | edit)
- Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities (← links | edit)
- Auto pipette and Liquid handler literature review (← links | edit)
- Dr. Frost sodis polymer experimental procedure (← links | edit)
- Laser dot welding : MOST (← links | edit)
- Open-source syringe pump (← links | edit)
- PET Extrusion (← links | edit)
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation (← links | edit)
- Steel 3D printing literature review (← links | edit)
- PET preparation protocol:MOST (← links | edit)
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament (← links | edit)
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities (← links | edit)
- RecycleBot Instructions (← links | edit)
- Silver plating:MOST (← links | edit)
- Feeding Everyone No Matter What (← links | edit)
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions (← links | edit)
- InGaN growth buffer layer literature review (← links | edit)
- It Is Time to Move Research Expenditures to the Denominator in University Metrics (← links | edit)
- Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing (← links | edit)
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun (← links | edit)
- Solar Panels holders (Solar powered delta) (← links | edit)
- Building Open Source Hardware in Academia (← links | edit)
- Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses (← links | edit)
- Beaglebone:MOST (← links | edit)
- Quantifying the Value of Open Source Hardware Development (← links | edit)
- Photovoltaic Nitrogen-fixation and organic farming literature review (← links | edit)
- PV-Powered Recyclebot (← links | edit)
- Spin coater Literature Review (← links | edit)
- PV and CHP Hybrid System (← links | edit)
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films (← links | edit)
- Appropriate technology graduate thesis literature review (← links | edit)
- Auto-Clearance Adjustable Triple Hotend Effector (← links | edit)
- Photovoltaic System for Internet applications Literature Review (← links | edit)
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom (← links | edit)
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications (← links | edit)
- Recyclebot v4.0ac (← links | edit)
- XRD for 3-D printed parts (← links | edit)
- Polymer recycling codes for distributed manufacturing with 3-D printers (← links | edit)
- Method of producing cellulose insulation (← links | edit)
- Review of positive externalities of photovoltaics for the grid (← links | edit)
- Differential scanning calorimetry protocol: MOST (← links | edit)
- Review of low cost synthesis of perovskite solar cells (← links | edit)
- A Case for Weakening Patent Rights (← links | edit)
- Optimization of annealing cycles for electric output in outdoor conditions for amorphous silicon photovoltaic–thermal systems (← links | edit)
- Lulzbot mini user guide:MOST (← links | edit)
- Open-source laser cutter (← links | edit)
- Lulzbot TAZ user guide:MOST (← links | edit)
- Methodology for 3D-Printed Part Design (← links | edit)
- Applications of Open Source 3-D Printing on Small Farms (← links | edit)
- ABS recycling for 3-D printer filament (← links | edit)
- GTAW-based 3D printing papers literature review (← links | edit)
- GMAW and GTAW 3D printing microsctructure literature review (← links | edit)
- Bike Pedal Example of Methodology for 3D-Printed Part Design (← links | edit)
- Solar-powered 3-D printer - Literature review (← links | edit)
- Chenlong Nanobeads Project (← links | edit)
- Reindeer husbandry literature review (← links | edit)
- Photovoltaic applications in northern climates literature review (← links | edit)
- Mobile photovoltaic applications literature review (← links | edit)
- Resilience to global food supply catastrophes (← links | edit)
- Polymer drying protocol:MOST (← links | edit)
- Ultrasonic test protocol: MOST (← links | edit)
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (← links | edit)
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto (← links | edit)
- How to install FLIR Lepton Thermal Camera and applications on Raspberry Pi (← links | edit)
- Plug-and-Play Solar Photovoltaic Microinverter Systems (← links | edit)
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells (← links | edit)
- Plastic bottle strip 3D printer project (← links | edit)
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM (← links | edit)
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing (← links | edit)
- Return on Investment for Open Source Hardware Development (← links | edit)
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing (← links | edit)
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices (← links | edit)
- Aluminum substrate cleaning for 3-D printing:MOST (← links | edit)
- Steel substrate cleaning for 3-D printing:MOST (← links | edit)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (← links | edit)
- KRC racking data acquisition (← links | edit)
- Performance of U.S. hybrid distributed energy systems: Solar photovoltaic, battery and combined heat and power (← links | edit)
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer (← links | edit)
- Open-Source Photometric System for Enzymatic Nitrate Quantification (← links | edit)
- Weed wacker line as 3D printing filament (← links | edit)
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance (← links | edit)
- Economic Impact of Installing PV rooftop systems in Walmart Parking lots - Literature review (← links | edit)
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells (← links | edit)
- Photovoltaic technology impacts on national security: literature review (← links | edit)
- Microgrid PV-CHP-Battery: literature review (← links | edit)
- Control strategies for melting snow on PV modules (← links | edit)
- Educational Pathways to Remote Employment in Isolated Communities (← links | edit)
- Franklin:MOST (← links | edit)
- Surgical Retractors Literature Search (← links | edit)
- The Effects of PLA Color on Material Properties of 3-D Printed Components (← links | edit)
- Photovoltaic System Performance Enhancement With Non-Tracking Planar Concentrators: Experimental Results and Bi-Directional Reflectance Function (BDRF) Based Modelling (← links | edit)
- Franklin (← links | edit)
- MOST Delta end effector for nylon (← links | edit)
- Open-source, self-replicating 3-D printer factory for small-business manufacturing (← links | edit)
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems (← links | edit)
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer (← links | edit)
- Nicaragua Enabling the Future Project:MOST (← links | edit)
- 3d printing safety (← links | edit)
- 3D printed photovoltaic module spacer (← links | edit)
- Preparation of meta-stable phases of barium titanate by sol-hydrothermal method (← links | edit)
- Solar Photovoltaic Powered On-Site Ammonia Production for Nitrogen Fertilization (← links | edit)
- The potential of agrivoltaic systems (← links | edit)
- MOST Delta end effector for polypropylene (← links | edit)
- GigabotHX (← links | edit)
- Sharing Free Knowledge to Save Humanity (← links | edit)
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages (← links | edit)
- Metal wire embedding in fused filament 3-D printing (← links | edit)
- 3D Metal Printing Slicer Plugin (← links | edit)
- Reducing the Threat of a Nuclear Iran with Photovoltaic Technology: The Generous Solar Option (← links | edit)
- Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudes (← links | edit)
- Aligning executive incentives with global public health goals (← links | edit)
- Free and Open-source Control Software for 3-D Motion and Processing (← links | edit)
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems (← links | edit)
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics (← links | edit)
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem (← links | edit)
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development (← links | edit)
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices (← links | edit)
- Dip coating:MOST (← links | edit)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System/Literature review (← links | edit)
- Intellectual Property barriers to photvoltaic efficiency (← links | edit)
- Kirigami design approach to LCPV reflectors (← links | edit)
- PV deployed on noise barriers literature review (← links | edit)
- Open source 4-point probe literature review (← links | edit)
- Global value chains from a 3D printing perspective (← links | edit)
- 3-D print warping literature review:MOST (← links | edit)
- Recyclebot/Literature review (← links | edit)
- Value Of solar literature review (← links | edit)
- Technical Guidance for Evaluating Selected Solar Technologies on Airports (← links | edit)
- T400 temperature datalogger:MOST (← links | edit)
- Biofuel vs PV literature review (← links | edit)
- Low Temperature High Strength Bainite Literature Review (← links | edit)
- PV and Recyclebot (← links | edit)
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices (← links | edit)
- Thermal conductivity of filaments for 3D printing lit review (← links | edit)
- PET Crystallinity (← links | edit)
- Isostatic Pressing Protocol (HIP\CIP):MOST (← links | edit)
- How Accounting Costs Science Millions a Year (← links | edit)
- Recyclebot v4.0dc (← links | edit)
- Open Source Polymer Welder Literature Review (← links | edit)
- Fluorometer Literature Review (← links | edit)
- Franklin Firmware on GigabotHX:MOST (← links | edit)
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems (← links | edit)
- 3-D printed weld bead geometry characterization (← links | edit)
- Literature review acrylonitrile butadiene styrene plastic recylling (← links | edit)
- Recyclebot v4.1 (← links | edit)
- Metal Wire Embedding Lit Review (← links | edit)
- Glass substrate cleaning method: MOST (← links | edit)
- Slot Die Head for Solution-processed PV Cells Lit Review (← links | edit)
- Open source syringe pump 3-D printer (← links | edit)
- Retraining Investment for U.S. Transition from Coal to Solar Photovoltaic Employment (← links | edit)
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States (← links | edit)
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds (← links | edit)
- Alternative Foods as a Solution to Global Food Supply Catastrophes (← links | edit)
- Atomic Force Microscopy(AFM) Protocol : MOST (← links | edit)
- Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing (← links | edit)
- Backgrounder:MOST (← links | edit)
- System Advisor Model (SAM):MOST (← links | edit)
- Filament print settings: MOST (← links | edit)
- Free and open-source automated 3-D microscope (← links | edit)
- Feeding Everyone if Industry is Disabled (← links | edit)
- Providing Non-food Needs if Industry is Disabled (← links | edit)
- Vitamins in Agricultural Catastrophes (← links | edit)
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply (← links | edit)
- Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides (← links | edit)
- Recycled PLA Filament for Concrete Aggregate Literature Review (← links | edit)
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally (← links | edit)
- Chemtool(How to draw chemistry):MOST (← links | edit)
- Grinding Mill in Forestry Plant:MOST (← links | edit)
- Transmission Measurement Procedure:MOST (← links | edit)
- MOST delta-based metal printers SOP (← links | edit)
- CNC Router Parts-based metal printers SOP (← links | edit)
- MOST Metal Cura (← links | edit)
- 3d printing error detection (← links | edit)
- Wood Filament Fabrication Literature Review (← links | edit)
- Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography (← links | edit)
- Open Source Laboratory Sample Rotator Mixer and Shaker (← links | edit)
- RecycleBot modification - automated feeder (← links | edit)
- 3D printed solar photovoltaic racking (← links | edit)
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain (← links | edit)
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger (← links | edit)
- U.S. market for solar photovoltaic plug-and-play systems (← links | edit)
- Open-source wax 3DP for investment casting (← links | edit)
- Hot end holder with 3 fans (← links | edit)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (← links | edit)
- Nuclear Insurance Subsidies Cost from Post-Fukushima Accounting Based on Media Sources (← links | edit)
- Feeding Everyone if the Sun is Obscured and Industry is Disabled (← links | edit)
- Grid Isolated Solar Photovoltaic Systems - Lit Review (← links | edit)
- Photovoltaic Literature Reviews (← links | edit)
- Community solar literature review (← links | edit)
- Solar floatovoltaics lit review (← links | edit)
- Optimizing reflector orientation for a solar panel at various latitudes (← links | edit)
- Open-Source Automated Mapping Four-Point Probe (← links | edit)
- Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings (← links | edit)
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers (← links | edit)
- Anisotropic FFF Material Properties lit review (← links | edit)
- CNC Router Parts metal 3D printer (← links | edit)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (← links | edit)
- Using Franklin on a CNC Router Parts 3-D printer (← links | edit)
- Emerging Business Models for Open Source Hardware (← links | edit)
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon (← links | edit)
- How to get embodied energy from CES database (← links | edit)
- Tube Furnace Protocol:MOST (← links | edit)
- Thermal properties of 3-D printed polylactic acid-metal composites (← links | edit)
- Super Bainite METHODS (← links | edit)
- Democratising design in scientific innovation: application of an open value network to open source hardware design (← links | edit)
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities (← links | edit)
- U.S. strategic solar photovoltaic-powered microgrid deployment for enhanced national security (← links | edit)
- 3D printed click-MUAC bands (← links | edit)
- Open Source Atomic Layer Deposition System (← links | edit)
- Power and energy potential of mass-scale photovoltaic noise barrier deployment- A case study for the U.S. (← links | edit)
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture (← links | edit)
- Potential lives saved by replacing coal with solar photovoltaic electricity production in the U.S. (← links | edit)
- Gigabot Polymer Printing:MOST (← links | edit)
- Improving recyclebot concepts (← links | edit)
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography (← links | edit)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System (← links | edit)
- Technical Solar Photovoltaic Potential of Scaled Parking Lot Canopies- A Case Study of Walmart U.S.A. (← links | edit)
- Enhanced Dye-Sensitized Solar Cell Performance using Strontium Titanate Perovskite Integrated Photoanodes Modified with Plasmonic Silver Nanoparticles (← links | edit)
- Microwave-Assisted Synthesized Gadolinium Doped Barium Strontium Titanate Nanostructures: Structural and Optical Properties for DSSC Applications (← links | edit)
- FAST first day (← links | edit)
- Reverse Osmosis Literature Review (← links | edit)
- Open-Source Script for Design and 3D Printing of Porous Structures for Soil Science (← links | edit)
- Global distribution of forest classes and leaf biomass for use as alternative foods to minimize malnutrition (← links | edit)
- Canadian PV Racking System Standards Literature Review (← links | edit)
- Western fab access (← links | edit)
- Expanded Microchannel Heat Exchanger: Finite Difference Modeling (← links | edit)
- Long-term cost-effectiveness of interventions for loss of electricity\industry compared to artificial general intelligence safety (← links | edit)
- Open Source Software Toolchain for Automated Non-Targeted Screening for Toxins in Alternative Foods (← links | edit)
- FAST Researcher Expectations (← links | edit)
- Literature Review: Self-Ballasted OS Roof PV Rack from Waste Plastic (← links | edit)
- Impact of Coupled Plasmonic Effect with Multishaped Silver Nanoparticles on Efficiency of Dye Sensitized Solar Cells (← links | edit)
- Parametric Open Source Cold-Frame Agrivoltaic Systems (← links | edit)
- Fast (redirect page) (← links | edit)
- Rapid repurposing of pulp and paper mills, biorefineries, and breweries for lignocellulosic sugar production in global food catastrophes (← links | edit)