Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament[edit | edit source]

Source: Life cycle analysis of distributed recycling of post-consumer high-density polyethylene for 3-D printing filament[1]

Abstract The growth of desktop 3-D printers is driving an interest in recycled 3-D printer filament to reduce costs of distributed production. Life cycle analysis studies were performed on the recycling of high density polyethylene into filament suitable for additive layer manufacturing with 3-D printers. The conventional centralized recycling system for high population density and low population density rural locations was compared to the proposed in home, distributed recycling system. This system would involve shredding and then producing filament with an open-source plastic extruder from post-consumer plastics and then printing the extruded filament into usable, value-added parts and products with 3-D printers such as the open-source self replicating rapid prototyper, or RepRap. The embodied energy and carbon dioxide emissions were calculated for high density polyethylene recycling using SimaPro 7.2 and the database EcoInvent v2.0. The results showed that distributed recycling uses less embodied energy than the best-case scenario used for centralized recycling. For centralized recycling in a low-density population case study involving substantial embodied energy use for transportation and collection these savings for distributed recycling were found to extend to over 80%. If the distributed process is applied to the U.S. high density polyethylene currently recycled, more than 100 million MJ of energy could be conserved per annum along with the concomitant significant reductions in greenhouse gas emissions. It is concluded that with the open-source 3-D printing network expanding rapidly the potential for widespread adoption of in-home recycling of post-consumer plastic represents a novel path to a future of distributed manufacturing appropriate for both the developed and developing world with lower environmental impacts than the current system.

Notes

  • Calculation of waste energy and material resources from not Recycling HDPE.
  • Estimating the Energy use and the CO2 emission during the use of a RECYCLEBOT.
  • Estimating the time required for the filament extrusion.

Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas[edit | edit source]

Source: Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas[2]

Abstract Although the environmental benefits of recycling plastics are well established and most geographic locations within the U.S. offer some plastic recycling, recycling rates are often low. Low recycling rates are often observed in conventional centralized recycling plants due to the challenge of collection and transportation for high-volume low-weight polymers. The recycling rates decline further when low population density, rural and relatively isolated communities are investigated because of the distance to recycling centers makes recycling difficult and both economically and energetically inefficient. The recent development of a class of open source hardware tools (e.g. RecycleBots) able to convert post-consumer plastic waste to polymer filament for 3-D printing offer a means to increase recycling rates by enabling distributed recycling. In addition, to reducing the amount of plastic disposed of in landfills, distributed recycling may also provide low-income families a means to supplement their income with domestic production of small plastic goods. This study investigates the environmental impacts of polymer recycling. A life-cycle analysis (LCA) for centralized plastic recycling is compared to the implementation of distributed recycling in rural areas. The environmental impact of both recycling scenarios is quantified in terms of energy use per unit mass of recycled plastic. A sensitivity analysis is used to determine the environmental impacts of both systems as a function of distance to recycling centers. The results of this LCA study indicate that distributed recycling of HDPE for rural regions is energetically favorable to using virgin resin or conventional recycling processes. This study indicates that the technical progress in solar photovoltaic devices, open-source 3-D printing and polymer filament extrusion have made distributed polymer recycling and upcycling technically viable.

Notes

  • Explaining the benefits of recycling plastics and their difference in the environment.
  • Development of tools for the same recycling process.
  • Economic effect of this recycling technique.

Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities[edit | edit source]

Source: Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities[3]

Abstract Manufacturing in areas of the developing world that lack electricity severely restricts the technical sophistication of what is produced. More than a billion people with no access to electricity still have access to some imported higher-technologies; however, these often lack customization and often appropriateness for their community. Open source appropriate tech­nology (OSAT) can over­come this challenge. Still, one of the key impediments to the more rapid development and distri­bution of OSAT is the lack of means of production beyond a specific technical complexity. This study designs and demonstrates the technical viability of two open-source mobile digital manufacturing facilities powered with solar photovoltaics, and capable of printing customizable OSAT in any com­munity with access to sunlight. The first, designed for com­munity use, such as in schools or maker­spaces, is semi-mobile and capable of nearly continuous 3-D printing using RepRap technology, while also powering multiple computers. The second design, which can be completely packed into a standard suitcase, allows for specialist travel from community to community to provide the ability to custom manufacture OSAT as needed, anywhere. These designs not only bring the possibility of complex manufacturing and replacement part fabrication to isolated rural communities lacking access to the electric grid, but they also offer the opportunity to leap-frog the entire conventional manufacturing supply chain, while radically reducing both the cost and the environmental impact of products for developing communities.

Notes

  • A necessary change of Power Source in developing world.
  • Introduction of mobile designs based on solar photovoltaics.

Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems[edit | edit source]

Source: Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems.[4]

Abstract For the first time, low-cost open-source 3-D printing provides the potential for distributed manufacturing at the household scale of customized, high-value, and complex products. To explore the potential of this type of ultra-distributed manufacturing, which has been shown to reduce environmental impact compared to conventional manufacturing, this paper presents a case study of a 3-D printable parametric design for recreational vehicle (RV) solar photovoltaic (PV) racking systems. The design is a four-corner mounting device with the ability to customize the tilt angle and height of the standoff. This enables performance optimization of the PV system for a given latitude, which is variable as RVs are geographically mobile. The open-source 3-D printable designs are fabricated and analyzed for print time, print electricity consumption, mechanical properties, and economic costs. The preliminary results show distributed manufacturing of the case study product results in an order of magnitude reduction in economic cost for equivalent products. In addition, these cost savings are maintained while improving the functionality of the racking system. The additional electrical output for a case study RV PV system with improved tilt angle functionality in three representative locations in the U.S. was found to be on average over 20% higher than that for conventional mass-manufactured racking systems. The preliminary results make it clear that distributed manufacturing - even at the household level - with open-source 3-D printers is technically viable and economically beneficial. Further research is needed to expand the results of this preliminary study to other types of products.

Polymer recycling codes for distributed manufacturing with 3-D printers[edit | edit source]

Source: Polymer recycling codes for distributed manufacturing with 3-D printers.[5]

Abstract

With the aggressive cost reductions for 3-D printing made available by the open-source self-replicating rapid prototypers (RepRaps) the economic advantage of custom distributed manufacturing has become substantial. In addition, the number of free designs is growing exponentially and the development and commercialization of the recyclebot (plastic extruders that fabricate 3-D printing filament from recycled or virgin materials) have greatly improved the material selection available for prosumer 3-D printer operators. These trends indicate that more individuals will manufacturer their own polymer products, however, there is a risk that an even larger fraction of polymer waste will not be recycled because it has not been coded. The current limited resin identification code available in the U.S. similarly restricts closing the loop on less popular polymers, which could hamper the environmental impact benefits of distributed manufacturing. This paper provides a solution for this challenge by (1) developing a recycling code model based off of the resin identification codes developed in China that is capable of expansion as more complex 3-D printing materials are introduced, (2) creating OpenSCAD scripts based on (1) to be used to print resin identification codes into products, (3) demonstrating the use of this functionality in a selection of products and polymer materials, and (4) outlining the software and policy tools necessary to make this application possible for widespread adoption. Overall the results showed that a far larger resin code identification system can be adopted in the U.S. to expand distributed recycling of polymers and manufacturing of plastic-based 3-D printed products.

Notes

  • Resin Identification OpenSCAD codes introduced in product designing
  • Need of Recycling Code models in market
  • Worldwide expansion of these ideas

Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament[edit | edit source]

Source: Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament[6]

Abstract The growth of desktop 3-D printer is driving an interest in recycled 3-D printer filament to reduce costs of distributed production. Life cycle analysis studies were performed on the recycling of high density polyethylene into filament suitable for additive layer manufacturing with 3-D printers. The conventional centralized recycling system for high population density and low population density rural locations was compared to the proposed in home, distributed recycling system. This system would involve shredding and then producing filament with an open-source plastic extruder from post-consumer plastics and then printing the extruded filament into usable, value-added parts and products with 3-D printers such as the open-source self replicating rapid prototyper, or RepRap. The embodied energy and carbon dioxide emissions were calculated for high density polyethylene recycling using SimaPro 7.2 and the database EcoInvent v2.0. The results showed that distributed recycling uses less embodied energy than the best-case scenario used for centralized recycling. For centralized recycling in a low-density population case study involving substantial embodied energy use for transportation and collection these savings for distributed recycling were found to extend to over 80%. If the distributed process is applied to the U.S. high density polyethylene currently recycled, more than 100 million MJ of energy could be conserved per annum along with the concomitant significant reductions in greenhouse gas emissions. It is concluded that with the open-source 3-D printing network expanding rapidly the potential for widespread adoption of in-home recycling of post-consumer plastic represents a novel path to a future of distributed manufacturing appropriate for both the developed and developing world with lower environmental impacts than the current system.

  • Calculation of waste energy and material resources from not Recycling HDPE.
  • Estimating the Energy use and the CO2 emission during the use of a RECYCLEBOT.
  • Estimating the time required for the filament extrusion.

Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas[edit | edit source]

Source: Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas[7]

Abstract Although the environmental benefits of recycling plastics are well established and most geographic locations within the U.S. offer some plastic recycling, recycling rates are often low. Low recycling rates are often observed in conventional centralized recycling plants due to the challenge of collection and transportation for high-volume low-weight polymers. The recycling rates decline further when low population density, rural and relatively isolated communities are investigated because of the distance to recycling centers makes recycling difficult and both economically and energetically inefficient. The recent development of a class of open source hardware tools (e.g. RecycleBots) able to convert post-consumer plastic waste to polymer filament for 3-D printing offer a means to increase recycling rates by enabling distributed recycling. In addition, to reducing the amount of plastic disposed of in landfills, distributed recycling may also provide low-income families a means to supplement their income with domestic production of small plastic goods. This study investigates the environmental impacts of polymer recycling. A life-cycle analysis (LCA) for centralized plastic recycling is compared to the implementation of distributed recycling in rural areas. Environmental impact of both recycling scenarios is quantified in terms of energy use per unit mass of recycled plastic. A sensitivity analysis is used to determine the environmental impacts of both systems as a function of distance to recycling centers. The results of this LCA study indicate that distributed recycling of HDPE for rural regions is energetically favorable to using virgin resin or conventional recycling processes. This study indicates that the technical progress in solar photovoltaic devices, open-source 3-D printing and polymer filament extrusion have made distributed polymer recycling and upcycling technically viable.

  • Explaining the benefits of recycling plastics and its difference on the environment.
  • Development of tools for the same recycling process.
  • Economic effect of this recycling technique.

Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities[edit | edit source]

Source: Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities[8]

Abstract: Manufacturing in areas of the developing world that lack electricity severely restricts the technical sophistication of what is produced. More than a billion people with no access to electricity still have access to some imported higher-technologies; however, these often lack customization and often appropriateness for their community. Open source appropriate tech­nology (OSAT) can over­come this challenge, but one of the key impediments to the more rapid development and distri­bution of OSAT is the lack of means of production beyond a specific technical complexity. This study designs and demonstrates the technical viability of two open-source mobile digital manufacturing facilities powered with solar photovoltaics, and capable of printing customizable OSAT in any com­munity with access to sunlight. The first, designed for com­munity use, such as in schools or maker­spaces, is semi-mobile and capable of nearly continuous 3-D printing using RepRap technology, while also powering multiple computers. The second design, which can be completely packed into a standard suitcase, allows for specialist travel from community to community to provide the ability to custom manufacture OSAT as needed, anywhere. These designs not only bring the possibility of complex manufacturing and replacement part fabrication to isolated rural communities lacking access to the electric grid, but they also offer the opportunity to leap-frog the entire conventional manufacturing supply chain, while radically reducing both the cost and the environmental impact of products for developing communities.

References[edit | edit source]

  1. Kreiger, M. A., M. L. Mulder, A. G. Glover, and J. M. Pearce. "Life cycle analysis of distributed recycling of post-consumer high-density polyethylene for 3-D printing filament." Journal of Cleaner Production 70 (2014): 90-96.
  2. Kreiger, M., G. C. Anzalone, M. L. Mulder, A. Glover, and J. M. Pearce. "Distributed recycling of post-consumer plastic waste in rural areas." In MRS Proceedings, vol. 1492, pp. 91-96. Cambridge University Press, 2013.
  3. King, D., Babasola, A., Rozario, J., & Pearce, J. (2014). "Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities." Challenges In Sustainability, 2(1), 18-27. doi:10.12924/cis2014.02010018
  4. Ben Wittbrodt, John Laureto, Brennan Tymrak, Joshua M Pearce "Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems",Journal of Frugal Innovation 1.1 (2015)
  5. Hunt, E. J., Zhang, C., Anzalone, N., & Pearce, J. M. (2015). "Polymer recycling codes for distributed manufacturing with 3-D printers". Resources, Conservation and Recycling, 97, 24-30.
  6. Kreiger, M. A., M. L. Mulder, A. G. Glover, and J. M. Pearce. "Life cycle analysis of distributed recycling of post-consumer high-density polyethylene for 3-D printing filament." Journal of Cleaner Production 70 (2014): 90-96.
  7. Kreiger, M., G. C. Anzalone, M. L. Mulder, A. Glover, and J. M. Pearce. "Distributed recycling of post-consumer plastic waste in rural areas." In MRS Proceedings, vol. 1492, pp. 91-96. Cambridge University Press, 2013.
  8. D. L. King, A. Babasola, J. Rozario, and J. M. Pearce. Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities, 18-27, Oct. 2014.
FA info icon.svg Angle down icon.svg Page data
Authors Pratiksha
License CC-BY-SA-3.0
Language English (en)
Translations Indonesian
Related 1 subpages, 1 pages link here
Aliases Recyclebot literature review
Impact 9 page views (more)
Created January 25, 2016 by Pratiksha
Last modified June 9, 2023 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.