MOST completed publications and projects

▼Pearce publications

FAST · MOST · QAS

Agrivoltaics · Energy Conservation · Energy Policy · Floatovoltaics · Industrial Symbiosis · Life Cycle Analysis · Materials Science · Medical · Open Source · Photovoltaic Systems · Resilient Food · Solar Cells · Sustainable Development · Sustainability Education · Water

This page lists completed projects for the Category:MOST. Following the individual links leads to a summary of the project and key findings, related literature reviews, methods, protocols, and equipment, and an open access version of the paper published in a peer reviewed journal.

• 
  3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
• 
  Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios
• 
  A review of the value of solar methodology with a case study of the U.S. VOS
• 
  Conceptual Design and Rationale for a New Agrivoltaics Concept: Pastured-Raised Rabbits and Solar Farming
• 
  Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
• 
  Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings
• 
  Low emissions analysis platform model for renewable energy: Community-scale case studies in Nigeria
• 
  Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada
• 
  Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases
• 
  Reaction Induced Multifunctional TiO2 Rod/Spherical Nanostructured Materials for Screen Printed Dye Sensitized Solar Cells
• 
  Integrating solar energy with agriculture: Industry perspectives on the market, community, and socio-political dimensions of agrivoltaics
• 
  Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria
• 
  Open Source 3D-Printable Planetary Roller Screw for Food Processing Applications
• 
  Optoelectronic Properties: Carrier Transport, Recombination, and Stability
• 
  U.S. Potential of Sustainable Backyard Distributed Animal and Plant Protein Production During & After Pandemics
• 
  Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines
• 
  Performance and analysis of retail store‐centered microgrids with solar photovoltaic parking lot, cogeneration, and battery‐based hybrid systems
• 
  Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass
• 
  Finite Difference Heat Exchanger Model: Flow Maldistribution with Thermal Coupling
• 
  Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models
• 
  Open source disease analysis system of cactus by artificial intelligence and image processing
• 
  Cost Effectiveness of AGI Safety Versus Preparation for Loss of Electricity/Industry
• 
  https://osf.io/jns2e Rapid Repurposing of Biorefinery, Pulp & Paper and Breweries for Lignocellulosic Sugar Production in Global Food Shortages
• 
  Methane Single Cell Protein: securing protein supply during global food catastrophes
• 
  Do Agrivoltaics Improve Public Support for Solar Photovoltaic Development? Survey Says: Yes!
• 
  To Catch the Sun
• 
  Overcoming Supply Chain Disruptions During Pandemics by Utilizing Found Hardware for Open Source Gentle Ventilation

• 
  How to turn plastic waste in your recycle bin into profit
• 
  Pearce Interview on Little DaVinces
• 
  Get Better at Garbage: Episode 24: How to turn your plastic waste into profit utilizing the DRAM 3D printing method.
• 
  STEM Everyday #190 - Open Source & STEM & Making
• 
  Tobacco killed 500,000 Americans in 2020 – is it time to control cigarette-makers?
• 
  Authors from All Over the World Share Their Tech in HardwareX to Battle COVID-19
• 
  Zero Waste Countdown
• 
  Affordable high-temperature 3D printers at home
• 
  Distributed Recycling and Additive Manufacturing for Sustainable Development Goals
• 
  Delivering in Decade of Action for achievement of the 2030 Agenda and its SDGs: Next steps for the TFM and its partners
• 
  Show Me the Money! Economic and Policy Aspects of Open Source Scientific Hardware at CZI's Open and Reproducible Hardware for Science Workshop
• 
  Panel: Preparing for the Next Global Crisis
• 
  Systems analysis approach to PET and olefin plastics supply chains in the circular economy: A review of datasets and models

• 
  Create, Share, and Save Money Using Open-Source Projects
• 
  Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics
• 
  The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems
• 
  Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
• 
  Scaling of greenhouse crop production in low sunlight scenarios
• 
  Limiting liability with positioning to minimize negative health effects of cellular phone towers
• 
  Open-Source Three-Dimensional Printable Infant Clubfoot Brace
• 
  Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
• 
  Towards national policy for open source hardware research: The case of Finland
• 
  Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades
• 
  Energy Conservation with Open Source Ad Blockers
• 
  Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
• 
  Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
• 
  Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite
• 
  A review of open source ventilators for COVID-19 and future pandemics
• 
  From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication
• 
  Open-Source Medical Hardware for Pandemics
• 
  Energy Policy for Energy Sovereignty: Can policy tools enhance energy sovereignty?
• 
  Demonstration of a simple encapsulation technique for prototype silicon solar cells
• 
  Open Source Digitally Replicable Lab-Grade Scales
• 
  Open-Source Grinding Machine for Compression Screw Manufacturing
• 
  The energy crises revealed by COVID: Intersections of Indigeneity, inequity, and health
• 
  Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
• 
  U.S. Greenhouse Gas Emission Bottlenecks: Prioritization of Targets for Climate Liability
• 
  Open Source Computer Vision-based Layer-wise 3D Printing Analysis
• 
  Real-Time Eye State Detection System for Driver Drowsiness Using Convolutional Neural Network
• 
  Vacuum Outgassing Characteristics of Unpigmented 3-D Printed Polymers Coated with ALD Alumina
• 
  RepRapable Automated Open Source Bag Valve Mask-based Ventilator
• 
  Open Source High-Temperature Reprap for 3-D Printing Heat-Sterilizable PPE and Other Applications
• 
  Parametric Nasopharyngeal Swab for Sampling COVID-19 and Other Respiratory Viruses: Open Source Design, SLA 3-D Printing and UV Curing System
• 
  Decentralized Renewable Hybrid Mini-Grids for Rural Communities: Culmination of the IREP Framework and Scale up to Urban Communities
• 
  Economic Savings for Scientific Free and Open Source Technology: A Review
• 
  Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
• 
  Open Source Arc Analyzer: Multi-Sensor Monitoring of Wire Arc Additive Manufacturing
• 
  Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks
• 
  Distributed manufacturing of after market flexible floating photovoltaic modules
• 
  Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
• 
  A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics
• 
  Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics
• 
  The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids
• 
  Image Analysis Method for Quantifying Snow Losses on PV Systems
• 
  Detecting Covert Legal Killing to Stop A New Approach to Terrorist Intention

• 
  MOST News Coverage 2020
• 
  Nuclear war could be devastating for the US, even if no one shoots back
• 
  Contribute to open source healthcare projects for COVID-19
• 
  What you need to know about open source ad blockers
• 
  As the coronavirus interrupts global supply chains, people have an alternative – make it at home
• 
  The 3D printing revolution is finally here
• 
  Finland's Research Dollars Stretch Further with Open Source
• 
  VR Roundtable- How to audit and secure for your COVID19 product?
• 
  FitWorld board game
• 
  The Free Quarantine Board Game
• 
  Fulbright Finland: A Life Changing Experience
• 
  Open Source and Renewable Energy Solutions to Improve our Quality of Life
• 
  3-D Printing Waste into Profit
• 
  BioPROTEIN
• 
  Guest Blog: MTU Releases Three New Open-source Tools for COVID-19
• 
  Open source tools provide an economic advantage for science
• 
  29 Best Sites to Read Online or Download Free Books (Legally) in 2020
• 
  How to influence people to join open source
• 
  Open hardware is economically efficient and generates a massive return on public investment
• 
  如何感召人们让其参与到开源活动中

• 
  Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
• 
  MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells
• 
  Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells
• 
  Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
• 
  Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
• 
  Towards Quantifiable Metrics Warranting Industry-Wide Corporate Death Penalties
• 
  Dual morphology titanium dioxide for dye sensitized solar cells
• 
  Policies to Overcome Barriers for Renewable Energy Distributed Generation: A Case Study of Utility Structure and Regulatory Regimes in Michigan
• 
  Food without sun: Price and life-saving potential
• 
  Could 79 People Solarize the U.S. Electric Grid?
• 
  Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing
• 
  Preliminary Automated Determination of Edibility of Alternative Foods: Non-Targeted Screening for Toxins in Red Maple Leaf Concentrate
• 
  Systems Analysis for PET and Olefin Polymers in a Circular Economy
• 
  Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application
• 
  Open Source Completely 3-D Printable Centrifuge
• 
  Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
• 
  Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites
• 
  Economic viability of captive off-grid solar photovoltaic and diesel hybrid energy systems for the Nigerian private sector
• 
  Low-cost open source ultrasound-sensing based navigational support for visually impaired
• 
  Ystruder: open source multifunction extruder with sensing and monitoring capabilities
• 
  Open Source Waste Plastic Granulator
• 
  Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites
• 
  Expanded microchannel heat exchanger: Non-destructive evaluation
• 
  Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules
• 
  Performance of Bifacial Photovoltaic Modules on a Dual-Axis Tracker in a High-Latitude, High-Albedo Environment

• 
  MOST News Coverage 2019
• 
  Open Source 3-D Printing
• 
  Expanding Equitable Access to Experimental Research and STEM Education by Supporting Open Source Hardware Development
• 
  Take a free course on OpenSCAD, FreeCAD, and Blender
• 
  Are We Measuring Research Success Wrong?
• 
  Do-it-yourself guides to better food production
• 
  Efectos potenciales de Sci-Hub sobre la publicación académica
• 
  Interview with Professor (Hardware)X on open source hardware
• 
  How to open source your academic work in 7 steps
• 
  How to leverage open hardware to improve your research (Oct24)
• 
  How universities are using open source to attract students

• 
  Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
• 
  Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives
• 
  General Design Procedure for Free and Open-Source Hardware for Scientific Equipment
• 
  Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophesCost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
• 
  Open-source parametric 3-D printed slot die system for thin film semiconductor processing
• 
  Economic impact of substituting solar photovoltaic electric production for tobacco farming
• 
  Development of a Resilient 3-D Printer for Humanitarian Crisis Response
• 
  Applications of Open Source GMAW-Based Metal 3-D Printing
• 
  Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations
• 
  Effects of silver catalyst concentration in metal assisted chemical etching of silicon
• 
  Open-source 3-D Printing in Managing Humanitarian Innovation
• 
  Properties of Al-Doped Zinc Oxide and In-Doped Zinc Oxide Bilayer Transparent Conducting Oxides for Solar Cell Applications
• 
  Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
• 
  Expanding the Consumer Bill of Rights for material ingredients
• 
  Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
• 
  How to perform a literature review with free and open source software
• 
  Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms
• 
  RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
• 
  Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems
• 
  A National Pragmatic Safety Limit for Nuclear Weapon Quantities
• 
  Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware
• 
  Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
• 
  Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
• 
  Modular Design for Spherical Microphone Arrays
• 
  Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
• 
  Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
• 
  Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production
• 
  Prospects of applying 3-D printing to economics of remote communities: Reindeer herder case
• 
  Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
• 
  Open Source Low-Cost Power Monitoring System
• 
  Micronutrient Availability in Alternative Foods During Agricultural Catastrophes
• 
  Wood Furniture Waste-Based Recycled 3-D Printing Filament
• 
  Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
• 
  3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
• 
  Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
• 
  3-D printable open source dual axis gimbal system for optoelectronic measurements
• 
  Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.

• 
  MOST News Coverage 2018
• 
  Can mirrors boost solar panel output - and help overcome Trump’s tariffs?
• 
  5 keys to building open hardware: Maximize your project's impact
• 
  Red Hat Honors Instructors Who Champion Open Source Education
• 
  Opportunities in Sustainable Development and Open Source Technology
• 
  How to Install a Heated Bed and Printhead Heater Cartridge for the Ultimaker 2 Go
• 
  How to make a 3-D printed corn sheller, This is Mold
• 
  Mainstream academia embraces open source hardware
• 
  How to set up an open source scholarship at your university
• 
  7 open source tools to make literature reviews easy
• 
  3D printers in the public library- Finland ahead of the curve
• 
  How Many Americans Will Die Because of Trump's Solar Tariffs?
• 
  What America Can Learn From Finland’s Education System: We Should Respect Teachers and Take Only the Best
• 
  What America Can Learn From Finland’s Education System Part 2: Embrace International Students and Pursue Graduate School for a Secure Future Mining Gazette
• 
  Tricks for telling if your 3D print is good enough for your bike
• 
  Trade wars will boost digital manufacturing – at consumers’ own homes with personal 3D printers
• 
  New research agreement opens up for universities and companies
• 
  An alternative to propping up coal power plants: Retrain workers for solar
• 
  3D printing scientific open hardware
• 
  3D-printed tools welcome
• 
  Open-source hardware could defend against the next generation of hacking
• 
  How open source hardware increases security
• 
  Why you should give your grandparents a 3D printer for Christmas
• 
  3D Printing of Open Source Hardware for Science

• 
  3-D Printing Solar Photovoltaic Racking in Developing World
• 
  Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
• 
  U.S. market for solar photovoltaic plug-and-play systems
• 
  Feeding Everyone if the Sun is Obscured and Industry is Disabled
• 
  Open-Source Automated Mapping Four-Point Probe
• 
  Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
• 
  Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
• 
  Emerging Business Models for Open Source Hardware
• 
  Open Source Laboratory Sample Rotator Mixer and Shaker
• 
  Democratising design in scientific innovation: application of an open value network to open source hardware design
• 
  Open Source 3-D Printers: An Appropriate Technology for Developing Communities
• 
  U.S. strategic solar photovoltaic-powered microgrid deployment for enhanced national security
• 
  Thermal properties of 3-D printed polylactic acid-metal composites
• 
  Power and energy potential of mass-scale photovoltaic noise barrier deployment- A case study for the U.S.
• 
  Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
• 
  Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing
• 
  Potential lives saved by replacing coal with solar photovoltaic electricity production in the U.S.
• 
  Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
• 
  Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
• 
  Technical Solar Photovoltaic Potential of Scaled Parking Lot Canopies- A Case Study of Walmart U.S.A.
• 
  Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing
• 
  Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
• 
  Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views
• 
  Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
• 
  Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
• 
  General Design Procedures for Airport-Based Solar Photovoltaic Systems
• 
  3-D printing open-source click-MUAC bands for identification of malnutrition
• 
  Defense for Covert Administrative Techniques for Neutralizing American Highly Qualified Personnel
• 
  Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities
• 
  Factors effecting real-time optical monitoring of fused filament 3D printing
• 
  Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
• 
  Open Source 3-D Printed Nutating Mixer
• 
  Agrivoltaic potential on grape farms in India
• 
  Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon
• 
  Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings
• 
  Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
• 
  Synthetic Method Dependent Physicochemical Properties and Electrochemical Performance of Ni-Doped ZnO
• 
  Slicer and process improvements for open-source GMAW-based metal 3-D printing
• 
  Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
• 
  Examining interconnection and net metering policy for distributed generation in the United States
• 
  Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
• 
  Maximizing Returns for Public Funding of Medical Research with Open-source Hardware

• 
  MOST News Coverage 2017
• 
  Search this database for inactive patents that are now in the public domain
• 
  Use the U.S. Patent System to Innovate (While Avoiding Willful Infringement)
• 
  Global Energy Leaders Podcast on Solar Energy
• 
  A graduate degree could springboard you into an open source job
• 
  Low-Cost 3D Printers Are Growing Up
• 
  3D design contest for medical tools in Africa
• 
  Could Trump's Deregulation Agenda Open An Additional $70 Billion Solar Market in the US?
• 
  Can You Earn 1000% ROI with 3-D Printing At Home?
• 
  America should recruit smart immigrants from every country
• 
  Obliterate the cost of consumer products with open hardware
• 
  Smart immigrants literally are making America great
• 
  3D Printing The Next Five Years by Prof. Joshua Pearce
• 
  Three reasons for open source tech in your 3D printing classroom
• 
  Clones welcome in scientific hardware
• 
  Open source hardware: first issue of HardwareX now available (Materials Today)
• 
  Life-Cycle Analysis of Distributed Manufacturing
• 
  The first open source 3D printer filament
• 
  Trump’s Apprenticeship Program Should Help Train Coal Miners For Solar Jobs
• 
  Learning from the U.S. Military: How Solar-Powered Microgrids Can Improve Your Company’s Security
• 
  Design and produce 3D printed, custom breast prosthetics
• 
  How an open source board game is saving the planet
• 
  HardwareX journal reveals the equipment behind the science
• 
  How solar power can protect the US military from threats to the electric grid (Salon, LA Times, Chicago Tribune, San Francisco Chronicle, Business Insider)
• 
  Editor's Note: Introduction to Open Hardware in Science and Engineering
• 
  Impacts of Open Source Hardware in Science and Engineering
• 
  Is the rise of open source connected to a decline in selfishness?
• 
  Subsidizing coal and nuclear power could drive customers off the grid, Chicago Tribune, Lincoln Journal Star, Washington's Top News
• 
  Paying it forward at Finland's Aalto Fablab
• 
  Accelerating science and improving equitable access to hands-on STEM education through open science hardware
• 
  How to use OpenSCAD to design for 3D printing
• 
  Would Trump Block Low-Cost Foreign Gold Imports? Lessons for the Brewing Solar Trade War
• 
  U.S. makes renewable energy software open source

• 
  Retraining Investment for U.S. Transition from Coal to Solar Photovoltaic Employment
• 
  The potential of agrivoltaic systems
• 
  A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages
• 
  Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudes
• 
  Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems
• 
  Emerging economic viability of grid defection in a northern climate using solar hybrid systems
• 
  A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
• 
  Nuclear Insurance Subsidies Cost from Post-Fukushima Accounting Based on Media Sources
• 
  The Case for Weaker Patents
• 
  Return on Investment for Open Source Hardware Development
• 
  High-Efficiency Solar-Powered 3-D Printers for Sustainable Development
• 
  Franklin - Free and Open-source Control Software for 3-D Motion and Processing
• 
  How Accounting Costs Science Millions a Year
• 
  Open-source, self-replicating 3-D printer factory for small-business manufacturing
• 
  Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds
• 
  Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics
• 
  Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem
• 
  Global value chains from a 3D printing perspective
• 
  Free and open-source automated 3-D microscope
• 
  Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing
• 
  Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain
• 
  Photovoltaic Materials and Electronic Devices
• 
  Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
• 
  A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
• 
  Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography
• 
  Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides
• 
  Are you overpaying your academic executive team? A method for detecting unmerited academic executive compensation
• 
  Alternative Foods as a Solution to Global Food Supply Catastrophes
• 
  Feeding Everyone if Industry is Disabled
• 
  Providing Non-food Needs if Industry is Disabled
• 
  Vitamins in Agricultural Catastrophes
• 
  Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply
• 
  Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally

• 
  MOST News Coverage 2016
• 
  Greetings from the Editor-in-Chief of HardwareX
• 
  The Best Defense is a Good Offense: How to kill patent trolls before they are born
• 
  Earth Day 2016: Why George W. Bush gives me hope for the future of the planet[1]
• 
  Consumers Can Profit from Leaving the Grid
• 
  3-D Printers Are Finally Easy Enough You Can Use Them
• 
  Potential Effects of Sci-Hub on Academic Publishing,[2]
• 
  Solar Industry Welcomes Coal Workers With Open Arms
• 
  HardwareX: New Open Access Journal for Open Source Hardware from Elsevier
• 
  Building Your Own Home From Open Source Blocks[3]
• 
  New journal HardwareX to promote open source hardware for science
• 
  A open source toolkit for building your own home
• 
  What If All U.S. Coal Workers Were Retrained to Work in Solar?
• 
  Global citizens unite to improve housing with open design and development
• 
  Rehab Addict’s Nicole Curtis and Hackers Agree : Open Hardware Rules
• 
  Funding Universal Open Access via Academic Efficiency Gains from Government Funder Sponsored Open Access Journals
• 
  Practical Laboratory Automation Forward
• 
  How maker communities align with open source
• 
  Solar Is Being Held Back by Regulations, Not Technology
• 
  Best of Opensource.com - Hardware
• 
  Enzymes and Photometers

• 
  Feeding Everyone No Matter What
• 
  Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
• 
  Resilience to global food supply catastrophes
• 
  A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
• 
  Quantifying the Value of Open Source Hardware Development
• 
  Building Open Source Hardware in Academia
• 
  Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto
• 
  Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
• 
  A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
• 
  Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells
• 
  Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices
• 
  Optimization of annealing cycles for electric output in outdoor conditions for amorphous silicon photovoltaic–thermal systems
• 
  Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
• 
  Polymer recycling codes for distributed manufacturing with 3-D printers
• 
  Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom
• 
  Evaluation of RepRap 3D Printer Workshops in K-12 STEM
• 
  Applications of Open Source 3-D Printing on Small Farms
• 
  Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing
• 
  In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
• 
  Performance of U.S. hybrid distributed energy systems: Solar photovoltaic, battery and combined heat and power
• 
  Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer
• 
  Open-Source Photometric System for Enzymatic Nitrate Quantification
• 
  Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
• 
  Overcoming the North's Diesel Dependence With Renewable Energy
• 
  Educational Pathways to Remote Employment in Isolated Communities
• 
  Photovoltaic System Performance Enhancement With Non-Tracking Planar Concentrators: Experimental Results and Bi-Directional Reflectance Function (BDRF) Based Modelling
• 
  Impact of Snow and Ground Interference on Photovoltaic Electric System Performance
• 
  A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
• 
  Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
• 
  Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer
• 
  Preparation of meta-stable phases of barium titanate by sol-hydrothermal method
• 
  Solar Photovoltaic Powered On-Site Ammonia Production for Nitrogen Fertilization
• 
  Sharing Free Knowledge to Save Humanity
• 
  The Effects of PLA Color on Material Properties of 3-D Printed Components
• 
  Reducing the Threat of a Nuclear Iran with PV: The Generous Solar Option
• 
  Aligning executive incentives with global public health goals

• 
  MOST News Coverage 2015
• 
  Intellectual Property as a Strategic National Industrial Weapon: the Case of 3D Printing
• 
  Michigan Tech course to build your own 3D printer
• 
  Science for All: How to Make Free, Open Source Laboratory Hardware
• 
  Buckle up for fast-tracked science thanks to open-source hardware
• 
  3-D printable photovoltaic module spacer

• 
  Laboratory equipment: Cut costs with open-source hardware
• 
  Open-source syringe pump
• 
  Free and Open Source Appropriate Technology
• 
  Technology whose time has come
• 
  Open-source hardware for science in Ecuador
• 
  Save the planet board game
• 
  Securitization of residential solar photovoltaic assets
• 
  Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems
• 
  Effects of spectral albedo on solar photovoltaic devices
• 
  Photovoltaic system performance enhancement with non-tracking planar concentrators
• 
  Effects of dispatch strategy for solar photovoltaic-thermal systems
• 
  Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics
• 
  Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities
• 
  Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
• 
  Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental
• 
  Implementing RepRaps into a Mechanical/Manufacturing Program
• 
  The RepRap 3-D Printer Revolution in STEM Education
• 
  Open-source mobile water quality testing platform
• 
  Innovation through collaboration: scaling up solutions for sustainable development
• 
  Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan
• 
  A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
• 
  Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype
• 
  Delta Build Workshop
• 
  Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities
• 
  Multi-resonant silver nano-disk patterned thin film solar cell
• 
  Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
• 
  Feeding Everyone No Matter What
• 
  Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions
• 
  It Is Time to Move Research Expenditures to the Denominator in University Metrics
• 
  Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing
• 
  Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
• 
  Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses
• 
  Open source 3-D printable corn sheller

• 
  Open-source Lab
• 
  Open-source metal 3-D printer
• 
  Open-source 3D-printable optics equipment
• 
  Open-source colorimeter
• 
  Open-source hardware for research and education
• 
  The Internet and other ICTs as tools and catalysts for sustainable development
• 
  Open-source nanotechnology: solutions to a modern intellectual property tragedy
• 
  Environmental impacts of distributed manufacturing with 3-D printing
• 
  Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
• 
  RecycleBots for distributed plastic recycling
• 
  Distributed recycling of post-consumer plastic waste in rural areas
• 
  Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
• 
  Open-source RepRap 3-D Printer Teacher Workshop
• 
  Toward renewable energy geo-information infrastructures
• 
  Automated quantification of solar photovoltaic potential in cities
• 
  Simple and low-cost method of planning for tree growth and lifetime effects on solar photovoltaic systems performance
• 
  Community Voices: Perspectives on Renewable Energy in Nunavut
• 
  Hybrid photovoltaic-trigeneration systems
• 
  Life cycle analysis of silane recycling in amorphous silicon-based solar photovoltaic manufacturing
• 
  Progress in indium gallium nitride materials for solar photovoltaics
• 
  Advances in plasmonic light trapping in thin-film solar photovoltaic devices
• 
  The viability of nanotechnology-based bandgap engineering in solar photovoltaic devices for sustainable energy generation
• 
  Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation
• 
  The effect of spectral albedo on amorphous silicon and crystalline silicon solar photovoltaic device performance
• 
  Effects of snow on photovoltaic performance
• 
  A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
• 
  Characteristics of self-assembled ultrathin Nafion films

• 
  Open source nanotechnology
• 
  Technical feasibility of renewable electricity generation in Nunavut
• 
  Renewable energy policy in the north
• 
  Prediction of energy effects on photovoltaic systems due to snowfall events
• 
  Building research equipment with free, open-source hardware
• 
  Parametric empirical determination of PV short circuit current
• 
  Open source research in sustainability
• 
  A new model for enabling innovation in appropriate technology for sustainable development
• 
  Open-source development of solar photovoltaic technology
• 
  Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
• 
  Barriers to Appropriate Technology Growth in Sustainable Development
• 
  Industrial symbiosis in photovoltaic manufacturing
• 
  Open source 3-D printing of OSAT
• 
  Review of solar levelized cost
• 
  The Case for Open Source Appropriate Technology
• 
  Amorphous silicon Photovoltaic-thermal(PVT) hybrids
• 
  Using LiDAR to assess rooftop solar photovoltaic potential on a large scale
• 
  Open solar photovoltaic systems optimization
• 
  Shading losses in solar photovoltaic potential at the municipal scale
• 
  Decreasing turbidity to optimize solar water disinfection
• 
  Expanded microchannel heat exchanger
• 
  Limitations of nuclear power as a sustainable energy source
• 
  Design and implementation of mobile educational games