The following pages link to Pearce publications in energy policy and sustainability policy:
Displayed 250 items.
- Expanded microchannel heat exchanger (← links | edit)
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices (← links | edit)
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation (← links | edit)
- MOST open access policy (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (← links | edit)
- Photovoltaic system performance enhancement with non-tracking planar concentrators: Experimental results and BDRF based modelling (← links | edit)
- Innovation through collaboration: scaling up solutions for sustainable development (← links | edit)
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development (← links | edit)
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype (← links | edit)
- Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities (← links | edit)
- Pearce publications in solar photovoltaic device physics (← links | edit)
- Pearce publications in materials science and engineering (← links | edit)
- Pearce publications in solar photovoltaic systems (← links | edit)
- Pearce publications in open source (← links | edit)
- Pearce publications in energy conservation (← links | edit)
- Pearce publications in education for sustainability and green pedagogy (← links | edit)
- Pearce publications in industrial symbiosis (← links | edit)
- Pearce publications in life cycle analysis and net energy (← links | edit)
- Pearce publications in energy policy and sustainability policy (transclusion) (← links | edit)
- Pearce publications in sustainable development and open source appropriate technology (← links | edit)
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation (← links | edit)
- Feeding Everyone No Matter What (← links | edit)
- It Is Time to Move Research Expenditures to the Denominator in University Metrics (← links | edit)
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun (← links | edit)
- Building Open Source Hardware in Academia (← links | edit)
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films (← links | edit)
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications (← links | edit)
- A Case for Weakening Patent Rights (← links | edit)
- Applications of Open Source 3-D Printing on Small Farms (← links | edit)
- Resilience to global food supply catastrophes (← links | edit)
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (← links | edit)
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells (← links | edit)
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM (← links | edit)
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing (← links | edit)
- Return on Investment for Open Source Hardware Development (← links | edit)
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing (← links | edit)
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices (← links | edit)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (← links | edit)
- Performance of U.S. hybrid distributed energy systems: Solar photovoltaic, battery and combined heat and power (← links | edit)
- Open-Source Photometric System for Enzymatic Nitrate Quantification (← links | edit)
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance (← links | edit)
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells (← links | edit)
- Educational Pathways to Remote Employment in Isolated Communities (← links | edit)
- The Effects of PLA Color on Material Properties of 3-D Printed Components (← links | edit)
- Photovoltaic System Performance Enhancement With Non-Tracking Planar Concentrators: Experimental Results and Bi-Directional Reflectance Function (BDRF) Based Modelling (← links | edit)
- Open-source, self-replicating 3-D printer factory for small-business manufacturing (← links | edit)
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems (← links | edit)
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer (← links | edit)
- Preparation of meta-stable phases of barium titanate by sol-hydrothermal method (← links | edit)
- Solar Photovoltaic Powered On-Site Ammonia Production for Nitrogen Fertilization (← links | edit)
- The potential of agrivoltaic systems (← links | edit)
- Sharing Free Knowledge to Save Humanity (← links | edit)
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages (← links | edit)
- Reducing the Threat of a Nuclear Iran with Photovoltaic Technology: The Generous Solar Option (← links | edit)
- Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudes (← links | edit)
- Aligning executive incentives with global public health goals (← links | edit)
- Free and Open-source Control Software for 3-D Motion and Processing (← links | edit)
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems (← links | edit)
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics (← links | edit)
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem (← links | edit)
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development (← links | edit)
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices (← links | edit)
- Open source 4-point probe literature review (← links | edit)
- Global value chains from a 3D printing perspective (← links | edit)
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices (← links | edit)
- How Accounting Costs Science Millions a Year (← links | edit)
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems (← links | edit)
- Retraining Investment for U.S. Transition from Coal to Solar Photovoltaic Employment (← links | edit)
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States (← links | edit)
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds (← links | edit)
- Alternative Foods as a Solution to Global Food Supply Catastrophes (← links | edit)
- Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing (← links | edit)
- Free and open-source automated 3-D microscope (← links | edit)
- Feeding Everyone if Industry is Disabled (← links | edit)
- Providing Non-food Needs if Industry is Disabled (← links | edit)
- Vitamins in Agricultural Catastrophes (← links | edit)
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply (← links | edit)
- Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides (← links | edit)
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally (← links | edit)
- Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography (← links | edit)
- Open Source Laboratory Sample Rotator Mixer and Shaker (← links | edit)
- 3D printed solar photovoltaic racking (← links | edit)
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain (← links | edit)
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger (← links | edit)
- U.S. market for solar photovoltaic plug-and-play systems (← links | edit)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (← links | edit)
- Nuclear Insurance Subsidies Cost from Post-Fukushima Accounting Based on Media Sources (← links | edit)
- Feeding Everyone if the Sun is Obscured and Industry is Disabled (← links | edit)
- Open-Source Automated Mapping Four-Point Probe (← links | edit)
- Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings (← links | edit)
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers (← links | edit)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (← links | edit)
- Emerging Business Models for Open Source Hardware (← links | edit)
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon (← links | edit)
- Thermal properties of 3-D printed polylactic acid-metal composites (← links | edit)
- Democratising design in scientific innovation: application of an open value network to open source hardware design (← links | edit)
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities (← links | edit)
- U.S. strategic solar photovoltaic-powered microgrid deployment for enhanced national security (← links | edit)
- 3D printed click-MUAC bands (← links | edit)
- Power and energy potential of mass-scale photovoltaic noise barrier deployment- A case study for the U.S. (← links | edit)
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture (← links | edit)
- Potential lives saved by replacing coal with solar photovoltaic electricity production in the U.S. (← links | edit)
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography (← links | edit)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System (← links | edit)
- Technical Solar Photovoltaic Potential of Scaled Parking Lot Canopies- A Case Study of Walmart U.S.A. (← links | edit)
- Factors effecting real-time optical monitoring of fused filament 3D printing (← links | edit)
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing (← links | edit)
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD (← links | edit)
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (← links | edit)
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates (← links | edit)
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography (← links | edit)
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market (← links | edit)
- General Design Procedures for Airport-Based Solar Photovoltaic Systems (← links | edit)
- Defense for Covert Administrative Techniques for Neutralizing American Highly Qualified Personnel (← links | edit)
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities (← links | edit)
- Open Source 3-D Printed Nutating Mixer (← links | edit)
- Agrivoltaic potential on grape farms in India (← links | edit)
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices (← links | edit)
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing (← links | edit)
- Synthetic Method Dependent Physicochemical Properties and Electrochemical Performance of Ni-Doped ZnO (← links | edit)
- Slicer and process improvements for open-source GMAW-based metal 3-D printing (← links | edit)
- Maximizing Returns for Public Funding of Medical Research with Open-source Hardware (← links | edit)
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes (← links | edit)
- Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives (← links | edit)
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability (← links | edit)
- Examining interconnection and net metering policy for distributed generation in the United States (← links | edit)
- Wood Furniture Waste-Based Recycled 3-D Printing Filament (← links | edit)
- Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates (← links | edit)
- General Design Procedure for Free and Open-Source Hardware for Scientific Equipment (← links | edit)
- Open-source parametric 3-D printed slot die system for thin film semiconductor processing (← links | edit)
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies (← links | edit)
- Economic impact of substituting solar photovoltaic electric production for tobacco farming (← links | edit)
- MOST News Coverage 2018 (← links | edit)
- MOST News Coverage 2017 (← links | edit)
- MOST News Coverage 2016 (← links | edit)
- MOST News Coverage 2015 (← links | edit)
- Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations (← links | edit)
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response (← links | edit)
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon (← links | edit)
- Applications of Open Source GMAW-Based Metal 3-D Printing (← links | edit)
- Properties of Al-Doped Zinc Oxide and In-Doped Zinc Oxide Bilayer Transparent Conducting Oxides for Solar Cell Applications (← links | edit)
- Open-source 3-D Printing in Managing Humanitarian Innovation (← links | edit)
- Expanding the Consumer Bill of Rights for material ingredients (← links | edit)
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer (← links | edit)
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens (← links | edit)
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms (← links | edit)
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid (← links | edit)
- How to perform a literature review with free and open source software (← links | edit)
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament (← links | edit)
- Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems (← links | edit)
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities (← links | edit)
- Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware (← links | edit)
- Expanded microchannel heat exchanger: Non-destructive evaluation (← links | edit)
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing (← links | edit)
- 3D printed dual axis gimbal system (← links | edit)
- Prospects of applying 3-D printing to economics of remote communities: Reindeer herder case (← links | edit)
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties (← links | edit)
- Food without sun: Price and life-saving potential (← links | edit)
- Modular Design for Spherical Microphone Arrays (← links | edit)
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing (← links | edit)
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing (← links | edit)
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components (← links | edit)
- Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production (← links | edit)
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations (← links | edit)
- Open Source Low-Cost Power Monitoring System (← links | edit)
- Micronutrient Availability in Alternative Foods During Agricultural Catastrophes (← links | edit)
- MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells (← links | edit)
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing (← links | edit)
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells (← links | edit)
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S. (← links | edit)
- Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells (← links | edit)
- MOST News Coverage 2019 (← links | edit)
- Dual morphology titanium dioxide for dye sensitized solar cells (← links | edit)
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins (← links | edit)
- Towards Quantifiable Metrics Warranting Industry-Wide Corporate Death Penalties (← links | edit)
- Policies to Overcome Barriers for Renewable Energy Distributed Generation: A Case Study of Utility Structure and Regulatory Regimes in Michigan (← links | edit)
- Open-Source Three-Dimensional Printable Infant Clubfoot Brace (← links | edit)
- Could 79 People Solarize the U.S. Electric Grid? (← links | edit)
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing (← links | edit)
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application (← links | edit)
- Preliminary Automated Determination of Edibility of Alternative Foods: Non-Targeted Screening for Toxins in Red Maple Leaf Concentrate (← links | edit)
- Systems Analysis for PET and Olefin Polymers in a Circular Economy (← links | edit)
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites (← links | edit)
- Open Source Completely 3-D Printable Centrifuge (← links | edit)
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing (← links | edit)
- Low-cost open source ultrasound-sensing based navigational support for visually impaired (← links | edit)
- Economic viability of captive off-grid solar photovoltaic and diesel hybrid energy systems for the Nigerian private sector (← links | edit)
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities (← links | edit)
- Open Source Waste Plastic Granulator (← links | edit)
- Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites (← links | edit)
- Limiting liability with positioning to minimize negative health effects of cellular phone towers (← links | edit)
- The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems (← links | edit)
- Scaling of greenhouse crop production in low sunlight scenarios (← links | edit)
- Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics (← links | edit)
- MOST News (← links | edit)
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing (← links | edit)
- Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules (← links | edit)
- Performance of Bifacial Photovoltaic Modules on a Dual-Axis Tracker in a High-Latitude, High-Albedo Environment (← links | edit)
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components (← links | edit)
- Towards national policy for open source hardware research: The case of Finland (← links | edit)
- Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades (← links | edit)
- Open Source Computer Vision-based Layer-wise 3D Printing Analysis (← links | edit)
- A review of open source ventilators for COVID-19 and future pandemics (← links | edit)
- Energy Conservation with Open Source Ad Blockers (← links | edit)
- Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy (← links | edit)
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media (← links | edit)
- Finite Difference Heat Exchanger Model: Flow Maldistribution with Thermal Coupling (← links | edit)
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers (← links | edit)
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite (← links | edit)
- From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication (← links | edit)
- Parametric Nasopharyngeal Swab for Sampling COVID-19 and Other Respiratory Viruses: Open Source Design, SLA 3-D Printing and UV Curing System (← links | edit)
- Open-Source Medical Hardware for Pandemics (← links | edit)
- Energy Policy for Energy Sovereignty: Can policy tools enhance energy sovereignty? (← links | edit)
- Demonstration of a simple encapsulation technique for prototype silicon solar cells (← links | edit)
- Open-Source Grinding Machine for Compression Screw Manufacturing (← links | edit)
- Open Source Digitally Replicable Lab-Grade Scales (← links | edit)
- The energy crises revealed by COVID: Intersections of Indigeneity, inequity, and health (← links | edit)
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response (← links | edit)
- Vacuum Outgassing Characteristics of Unpigmented 3-D Printed Polymers Coated with ALD Alumina (← links | edit)
- Open Source High-Temperature Reprap for 3-D Printing Heat-Sterilizable PPE and Other Applications (← links | edit)
- U.S. Greenhouse Gas Emission Bottlenecks: Prioritization of Targets for Climate Liability (← links | edit)
- Real-Time Eye State Detection System for Driver Drowsiness Using Convolutional Neural Network (← links | edit)
- Partially RepRapable Automated Open Source Bag Valve Mask-based Ventilator (← links | edit)
- Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios (← links | edit)
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane (← links | edit)
- Open Source Arc Analyzer: Multi-Sensor Monitoring of Wire Arc Additive Manufacturing (← links | edit)
- Decentralized Renewable Hybrid Mini-Grids for Rural Communities: Culmination of the IREP Framework and Scale up to Urban Communities (← links | edit)
- Economic Savings for Scientific Free and Open Source Technology: A Review (← links | edit)
- Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks (← links | edit)
- Distributed manufacturing of after market flexible floating photovoltaic modules (← links | edit)
- Conceptual Design and Rationale for a New Agrivoltaics Concept: Pasture-Raised Rabbits and Solar Farming (← links | edit)
- Reaction Induced Multifunctional TiO2 Rod\Spherical Nanostructured Materials for Screen Printed Dye Sensitized Solar Cells (← links | edit)
- A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics (← links | edit)
- Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics (← links | edit)
- The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids (← links | edit)
- A review of the value of solar methodology with a case study of the U.S. VOS (← links | edit)
- MOST News Coverage 2020 (← links | edit)
- Image Analysis Method for Quantifying Snow Losses on PV Systems (← links | edit)
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration (← links | edit)
- Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings (← links | edit)
- Open Source 3-D Printed ISO 8655 Compliant Multichannel Pipette (← links | edit)
- Low emissions analysis platform model for renewable energy: Community-scale case studies in Nigeria (← links | edit)
- Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada (← links | edit)
- Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases (← links | edit)
- Agrivoltaics (transclusion) (← links | edit)
- Integrating solar energy with agriculture: Industry perspectives on the market, community, and socio-political dimensions of agrivoltaics (← links | edit)
- Demonstration of the integrated rural energy planning framework for sustainable energy development in low-income countries: Case studies of rural communities in Nigeria (← links | edit)
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines (← links | edit)
- Open Source 3D-Printable Planetary Roller Screw for Food Processing Applications (← links | edit)
- Optoelectronic Properties: Carrier Transport, Recombination, and Stability (← links | edit)