J.M.Pearce (talk | contribs) |
m (→Current Research Projects: added mpwyzlic project) |
||
Line 18: | Line 18: | ||
== Current Research Projects == | == Current Research Projects == | ||
* [[MBE protocol:MOST]] | * [[MBE protocol:MOST]] | ||
Effects of Spectral Albedo on Photovoltaic Devices--[[User:Mpwyzlic|Mpwyzlic]] 18:16, 8 September 2011 (PDT) | |||
==Open Access Policy== | ==Open Access Policy== |
Revision as of 01:16, 9 September 2011
Welcome to the new home of the Pearce Research Group at Michigan Tech in Open Sustainability Technology housed within the Department of Materials Science & Engineering and Electrical & Computer Engineering. This research group focuses on open and applied sustainability, which is the application of science and innovation to ensure a better quality of life for all, now and into the future, in a just and equitable manner, whilst living within the limits of supporting ecosystems. Specifically we are interested in exploring the way solar energy can be used to provide clean sustainable electricity through photovoltaic devices.
Fundamental Research Areas
Photovoltaic Materials and Electronic Device Physics of Solar Photovoltaic Cells:
- Gallium nitride (GaN) and indium gallium nitride (InGaN)
- Hydrogenated amorphous and nanocrystalline silicon (a-Si:H, nc-Si:H)
Applied Sustainability and Green Engineering:
- Solar energy
- Sustainable development
For a full list of our recent publications organized by category go here.
Current Research Projects
Effects of Spectral Albedo on Photovoltaic Devices--Mpwyzlic 18:16, 8 September 2011 (PDT)
Open Access Policy
The group makes its best effort to open source its literature reviews and protocols as the research is taking place and provides direct access to our research protocols, experimental designs, and equipment. In addition, the group publishes in open access journals as much as possible and posts its pre-prints in open access databases. To browse pre-prints from some of Dr. Pearce's past work go here. Normally these pre-prints/final drafts are released under CC-BY-SA as soon as we are able. You can also read more details about completed projects here.
Safety
Help with Wiki Markup
The following are a few links that are helpful in writing in the wiki langauge.
Every page that you make should have {{MOST}} at the top and be placed in the appropriate categories.
- The Appropedia Help Page
- How to add an image tutorial
- Wikipedia's help page
- Math Equation Help in Wiki
Useful stuff for grad students
- Full list of present and past MOST members
- MOST literature reviews
- MOST methods
- MOST paper writing
- MOST completed projects and publications
- MOST library
- MOST guide to graduation
- MOST courses
- MOST group tips
- MOST last day
I am published - now what?
As you know getting a paper in the peer reviewed literature does not guarantee it will be widely read. In the group we then take the following steps:
- Write up a summary page in Appropedia of your article and place it in this category - it should link back to your literature review and any protocols you used. It should also have key findings and enhanced figures. It must have the full citation for your paper with a link both to the article at the journal via DOI and a link to your preprint. Finally, you should hyperlink all keywords within Appropedia and drop it in appropriate categories (e.g. photovoltaic).
- Format the summary appropriately and also place it on your Scitopics page - make sure to invite all co-authors to contribute to that page.
- Format the pre-print for with a header showing the full citation. Include all figures and tables - make it as readable as possible and send to Dr. Pearce to post MTU's pre-prints (coming soon), https://arxive.org or Qspace.
- For highly scientific work we will begin to post at MyExperiment - Dr. Pearce's page there.
- Write up a short summary from your appropedia summary for the MTU sustainability blog
- Finally if your work is newsworthy we will write a summary and send it to the University Press Office to release.
MTU Travel and Account Reimbursement
- budget [1]
Poster Printing
Student Grants and Jobs
- Entry into the Pearce Research Group at Michigan Tech in Open Sustainability Technology is extremely competitive, but we are always looking for outstanding applicants. Research assistantships are generally available for graduate students at the PhD level. For more information see http://www.mse.mtu.edu/~pearce/Index.html
- For Job searching after graduation see: Employment
- THE LINK FOUNDATION ANNOUNCES FELLOWSHIPS IN THE ENERGY FIELD
In an effort to foster education and innovation in the area of societal production and utilization of energy, the Link Foundation invites fellowship applications.
Students working toward a Ph.D. degree in energy-related fields at universities located in the U.S. or Canada. Fellowships are offered with a duration of 2 years and will be paid in two installments of $25,000. It is anticipated that two or three Link Energy Fellowships will be awarded in 2012. In recent years, about 100 applications have been received. $21,500 is to be used for the Fellow's stipend, $2,500 is to be used for expenses associated with the Fellow's research, and $1,000 is to be used for attending one or more technical meetings and/or publication expenses. Applications are due December 1.
The Link Foundation provides funds for direct costs, but does NOT support student tuition, institutional overhead or pooled costs.
Additional information. Application materials, a description of evaluation criteria, and other information pertaining to Link Foundation fellowships in the energy area may be found at www.linkenergy.org.
Other Link Foundation Programs The Link Foundation also offers fellowships in the area of simulation and training (www.ist.ucf.edu/link_foundation.htm) and fellowships in the area of ocean engineering (http://www.fit.edu/AcadRes/dmes/link/).
The Link Foundation provides equal opportunity regardless of sex, age, race, color, handicap, sexual orientation and national or ethnic origin and complies with all nondiscrimination laws.
Contact
Joshua 18:28, 27 July 2011 (PDT)
Subcategories
This category has the following 21 subcategories, out of 21 total.
J
- Jephias Gwamuri Thesis (12)
M
- MOST backpack delta (5)
- MOST Delta Build (30)
- MOST literature reviews (314)
- MOST news (4)
- MOST RepRap build (21)
- MOST RepRap methods (27)
- MOST users (65)
O
- Open source optics (72)
- OSAT 3D-Printable Designs (371)
P
- Pearce publications (14)
Pages in category "MOST"
The following 200 pages are in this category, out of 1,331 total.
(previous page) (next page)3
- 3-D print warping literature review:MOST
- 3-D printed weld bead geometry characterization
- 3-D printed weld bead geometry characterization/id
- 3-D printer tent
- 3-D printing of electrically conductive materials literature review
- 3-D printing of solar photovoltaic materials
- 3D Metal Printing P V Curve Literature Review
- 3D Metal Printing Slicer Plugin
- 3D Metal Printing Slicer Plugin/cs
- 3D Metal Printing Slicer Plugin/ru
- 3D printable OSAT gallery
- 3D printable OSAT gallery/zh
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printable PV components literature review
- 3D printable PV components literature review/The Replicating Rapid Prototyper
- 3D printable science equipment
- 3D printable science equipment page 2
- 3D printable science equipment page 2/es
- 3D printable science equipment page 2/it
- 3D printable science equipment page 2/zh
- 3D printable science equipment page 3
- 3D printable science equipment page 3/es
- 3D printable science equipment page 3/zh
- 3D printable science equipment/es
- 3D printable science equipment/pl
- 3D printable science equipment/pt
- 3D printable science equipment/zh
- 3D printed click-MUAC bands
- 3D printed click-MUAC bands/zh
- 3D printed dual axis gimbal system
- 3D printed dual axis gimbal system/ru
- 3D printed magnetic nanoparticle soft actuator
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3D Printed Micromanipulator
- 3D Printed Micromanipulator/pt
- 3D printed photovoltaic module spacer
- 3D printed photovoltaic module spacer/es
- 3D printed Polymer Derived Ceramics
- 3d Printed Polypropylene Sealing For Vacuum Applications Lit Review
- 3D printed solar photovoltaic racking
- 3D printed solar photovoltaic racking/de
- 3D printed solar photovoltaic racking/es
- 3D printed solar photovoltaic racking/ru
- 3D printed solar photovoltaic racking/zh
- 3D printer bed adhesion:MOST
- 3D printers education
- 3D printers for peace contest
- 3D Printing Basics:MOST
- 3D printing concrete
- 3d printing error detection
- 3D Printing Failure Database
- 3D Printing Failure Database/zh
- 3d printing safety
A
- A Case for Weakening Patent Rights
- A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A new model for enabling innovation in appropriate technology for sustainable development
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages
- A review of open source ventilators for COVID-19 and future pandemics
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
- A review of the value of solar methodology with a case study of the U.S. VOS
- A review of the value of solar methodology with a case study of the U.S. VOS/tr
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
- ABS recycling for 3-D printer filament
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone/th
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices
- Agrivoltaic bifacial vertical PV literature review
- Agrivoltaic potential on grape farms in India
- Agrivoltaics and zoning tax break
- Aligning executive incentives with global public health goals
- Alternative Foods as a Solution to Global Food Supply Catastrophes
- Alternative Foods as a Solution to Global Food Supply Catastrophes/es
- Alternative Foods as a Solution to Global Food Supply Catastrophes/zh
- Aluminum Iron Intermetallics
- Aluminum substrate cleaning for 3-D printing:MOST
- Aluminum substrate cleaning for 3-D printing:MOST/zh
- User:Alwoern
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Amorphous silicon degradation literature review
- Amorphous silicon degradation literature review/Hydrogen collision model of light-induced metastability
- Amorphous silicon PVT
- Amorphous silicon PVT/zh
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
- Angle of Repose Analysis
- Anisotropic FFF Material Properties lit review
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source 3-D Printing on Small Farms/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applications of Open Source GMAW-Based Metal 3-D Printing/fr
- Applications of Open Source GMAW-Based Metal 3-D Printing/it
- Applications of Open Source GMAW-Based Metal 3-D Printing/zh
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations/ru
- Appropriate technology graduate thesis literature review
- Appropriate technology graduate thesis literature review/th
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture/vi
- Arduino installation
- Arduino use: MOST
- Arduino use: MOST/es
- Artificial lung method MOST
- ASA Literature Review
- Assembling Delta Effector:MOST
- Assembling Delta Tie Rods:MOST
- Assembling Delta:MOST
- Assembling PlanetaryGearbox:MOST
- Atomic Force Microscopy(AFM) Protocol : MOST
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
- Atomic layer deposition literature review
- Atomic layer deposition:MOST
- Auto pipette and Liquid handler literature review
- Auto pipette and Liquid handler literature review/zh
- Auto-Clearance Adjustable Triple Hotend Effector
- Automated microscope stage literature review
- Automated quantification of solar photovoltaic potential in cities
B
- Backgrounder:MOST
- Backpack Delta
- Backpack Delta BOM
- Backpack Delta: Building the Lower Platform
- Backpack Delta: Building the Towers
- Backpack Delta: Building the Upper Platform
- Bandgap engineering of multijunction photovoltaic cells for spectral albedo of natural surfaces
- Bandgap engineering of multijunction photovoltaic cells for spectral albedo of natural surfaces/The rating of photovoltaic performance
- Barriers to Appropriate Technology Growth in Sustainable Development
- Barriers to Appropriate Technology Growth in Sustainable Development/id
- Beaglebone:MOST
- Beaglebone:MOST/es
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components/es
- Benefits of photovoltaic energy conversion for Michigan
- Bike Pedal Example of Methodology for 3D-Printed Part Design
- Biofuel vs PV literature review
- Biofuel vs PV literature review/Ethanol Industry and process descriptions
- BioPROTEIN
- BioPROTEIN/ru
- BioPROTEIN/zh
- Bioreflector method
- Blender animation protocol:MOST
- Blind Person's Assistant/ar
- Blind Person's Assistant/es
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
- Building Open Source Hardware in Academia
- Building Open Source Hardware in Academia/zh
- Building research equipment with free, open-source hardware
- Building research equipment with free, open-source hardware/es
- Building research equipment with free, open-source hardware/ru
C
- Calibrated light source:MOST
- Characterizing GaN:MOST
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Chemtool(How to draw chemistry):MOST
- User:Chenlong
- Chenlong Nanobeads Project
- Choice of crystal plane for InGaN opto-electonics applications
- CNC Router Parts metal 3D printer
- CNC Router Parts-based metal printers SOP
- Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production
- Community solar literature review
- Compact Open Source Automated Monochromator
- Comparative Life Cycle Analysis of Monocrystalline and Multicrystalline Silicon Solar Cells
- Comparative Life Cycle Analysis of Monocrystalline and Multicrystalline Silicon Solar Cells/Kumar, Economic Assessment of Photovoltaic Energy Production Prospects in India Procedia Earth and Planetary Science 2015
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing/it
- Computer vision and macine learning background
- Computer vision based real-time 3D printing analysis
- Computer vision based real-time 3D printing analysis/2010-2000
- Computer vision based real-time 3D printing analysis/2014
- Computer vision based real-time 3D printing analysis/Literature Review
- Conceptual Design and Rationale for a New Agrivoltaics Concept: Pasture-Raised Rabbits and Solar Farming
- Contact angle measurement on coated glass
- Contact angle with cell phone
- Contact angle with cell phone/ru
- Control strategies for melting snow on PV modules
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response/ko
- Converting 2D images to 3D for printing using open source software
- Converting 2D images to 3D for printing using open source software/da
- Converting 2D images to 3D for printing using open source software/pt
- Converting 2D images to 3D for printing using open source software/ro
- Converting 2D images to 3D for printing using open source software/zh
- Converting stl files to dualstrusions
- Corn sheller
- Corn sheller/cs
- Corn sheller/fr
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/es
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes/zh
Media in category "MOST"
The following 19 files are in this category, out of 19 total.
-
2012 case for OSAT.pdf 1,239 × 1,752, 9 pages; 306 KB
-
LED-vs-incan in Houghton.ods ; 31 KB
-
MOST HSPrusa extruder 41.jpg 453 × 640; 232 KB
-
MOST HSPrusa extruder 42.jpg 640 × 480; 260 KB
-
MOST HSPrusa extruder 43.jpg 640 × 480; 329 KB
-
MOST HSPrusa extruder 44.jpg 640 × 439; 326 KB
-
MOST HSPrusa y-carriage 22.jpg 640 × 480; 211 KB
-
MOST pump01.png 980 × 683; 97 KB
-
MOST pump02.png 980 × 683; 93 KB
-
MOST pump03.png 980 × 683; 99 KB
-
MOST pump04.png 980 × 683; 96 KB
-
MOST pump05.png 980 × 683; 93 KB
-
MOST pump06.png 980 × 683; 93 KB
-
MOST pump07.png 980 × 683; 101 KB
-
MOST pump08.png 980 × 683; 113 KB
-
MOST pump09.png 980 × 683; 106 KB
-
MTU-Plastic Bank Internships.pdf 1,275 × 1,650, 2 pages; 494 KB
-
Pearce-pubs-3.png 307 × 135; 102 KB
-
Recyclebot.gif 600 × 238; 3.01 MB