Category:Materials processing
(Redirected from Materials processing)
The articles in this category focus on the development of new sustainable processes for materials industries to address environmental, economic, and social issues. The goal is to develop environmentally, economically, and socially viable routes for materials processing that will lead to a sustainable materials industry. This category contains articles that promote and enhance the development of sustainable materials processes and contribute to the sustainability of materials industry. The aim is to investigate and develop processes that minimize pollution, waste, and energy consumption while increasing recyclability and adding value to waste materials.
Materials processing plays an essential role in the creation of new materials with enhanced and novel properties.
Subcategories
This category has the following 6 subcategories, out of 6 total.
Pages in category "Materials processing"
The following 200 pages are in this category, out of 203 total.
(previous page) (next page)A
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- Acoustic Damping using Polyurethane - Polymer Composites
- Acoustic Damping using Polyurethane - Polymer Composites/ru
- Adobe
- Adobe/es
- Adobe/it
- Adobe/ja
- Adobe/ko
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Amorphous Metal Alloys
- Amorphous Metal Alloys/el
- Amorphous Metal Alloys/ja
- Amorphous Metal Alloys/uk
- Amorphous Metal Alloys/zh
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Atomic force microscopy protocol: QAS
B
C
- Carbon fiber production
- Carbon fiber production/vi
- Carbon fiber production/zh
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Composites in the Aircraft Industry
- Composites in the Aircraft Industry/ar
- Composites in the Aircraft Industry/az
- Composites in the Aircraft Industry/cs
- Composites in the Aircraft Industry/el
- Composites in the Aircraft Industry/es
- Composites in the Aircraft Industry/fr
- Composites in the Aircraft Industry/he
- Composites in the Aircraft Industry/hu
- Composites in the Aircraft Industry/id
- Composites in the Aircraft Industry/it
- Composites in the Aircraft Industry/ko
- Composites in the Aircraft Industry/nl
- Composites in the Aircraft Industry/pl
- Composites in the Aircraft Industry/pt
- Composites in the Aircraft Industry/ro
- Composites in the Aircraft Industry/ru
- Composites in the Aircraft Industry/sk
- Composites in the Aircraft Industry/th
- Composites in the Aircraft Industry/tr
- Composites in the Aircraft Industry/uk
- Composites in the Aircraft Industry/vi
- Composites in the Aircraft Industry/zh
- Construction and materials
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
D
E
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon
- Electroplating
- Electrospray
- Electrospray/ko
- Electrostatic Powder Coating
- Electrostatic Powder Coating/hi
- Electrostatic Powder Coating/id
- Electrostatic Powder Coating/pt
- Electrostatic Powder Coating/vi
- Electrostatic Powder Coating/zh
- Enhanced Dye-Sensitized Solar Cell Performance using Strontium Titanate Perovskite Integrated Photoanodes Modified with Plasmonic Silver Nanoparticles
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Enriched second-harmonic generation in meta-phase barium titanate nanostructures synthesized by sol-gel hydrothermal method
- Environmental remediation of real textile dyeing wastewater under visible light and inactivation of pathogenic bacteria using ZnO/CuO nano-needles
F
H
I
- Impact of Coupled Plasmonic Effect with Multishaped Silver Nanoparticles on Efficiency of Dye Sensitized Solar Cells
- Improving Mechanical Properties of Carbon Nanotubes
- Improving Mechanical Properties of Carbon Nanotubes/fa
- Improving Mechanical Properties of Carbon Nanotubes/zh
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Increasing supercapacitor performance
- Increasing supercapacitor performance/ko
- Induction heating
- Induction heating/th
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
- InGaN solar cells literature review
- InGaN solar cells literature review/Optical Modelling of Thin Film Microstructures
- InGaN solar cells literature review/Photoluminescence associated with quantum dots in cubic GaN
- InGaN solar cells literature review/The Effect of Grain Boundaries on Electrical Conductivity in Thin GaN Layers
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
L
- Laser Cladding
- Laser Cladding/az
- Laser Cladding/es
- Laser Cladding/ru
- Laser Cladding/zh
- Laser hardening of steel gears
- Laser surface texturing
- Laser surface texturing/tr
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices
M
- MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells
- Materials
- MECH370 Materials Processing
- MECH370 Materials Processing/pt
- MECH370 Materials Processing/tr
- Metal reclamation and recycling of electronic waste
- Metal reclamation and recycling of electronic waste/zh
- Metalorganic Vapour Phase Epitaxy
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon
- Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations
- Microwave processing
- Microwave-Assisted Synthesized Gadolinium Doped Barium Strontium Titanate Nanostructures: Structural and Optical Properties for DSSC Applications
- Molecular beam epitaxy
- Molecular beam epitaxy/id
- Molecular beam epitaxy/zh
- Multi-functional platform
O
- Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass
- Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass/es
- Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass/fr
- Optic Fiber Fabrication
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms
- Optoelectronic Properties: Carrier Transport, Recombination, and Stability
P
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells
- Piñatex
- Piñatex/el
- Piñatex/es
- Plasma spray processing
- Plasma spray processing/uk
- Plasma spray processing/zh
- Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography
- Plastics recovery manual
- Plastics recovery manual/bn
- Plastics recovery manual/es
- Polymer calendering
- Polymer calendering/ar
- Polymer calendering/es
- Polymer calendering/fa
- Polymer calendering/hi
- Polymer calendering/id
- Polymer calendering/ko
- Polymer calendering/pt
- Polymer calendering/ta
- Polymer calendering/th
- Polymer calendering/tr
- Polymer calendering/vi
- Polymer calendering/zh
- Polymer environmental-friendly resin
- Polymer environmental-friendly resin/de
- Polymer environmental-friendly resin/uk
- Polymer microneedles
- Preparation of meta-stable phases of barium titanate by sol-hydrothermal method
- Production of Biodegradable Organic Plastics
- Production of Biodegradable Organic Plastics/pl
- Properties of Al-Doped Zinc Oxide and In-Doped Zinc Oxide Bilayer Transparent Conducting Oxides for Solar Cell Applications
R
S
- Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells
- Self-healing Polymer Composites
- Single Crystal Turbine Blades
- Single Crystal Turbine Blades/de
- Single Crystal Turbine Blades/es
- Single Crystal Turbine Blades/fa
- Single Crystal Turbine Blades/id
- Single Crystal Turbine Blades/ka
- Single Crystal Turbine Blades/ru
- Single Crystal Turbine Blades/tr
- Single Crystal Turbine Blades/vi
- Single Crystal Turbine Blades/zh
- Steel gear hardening
- Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides
- Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing
- Synthesis of Carbon Nanotubes
- Synthesis of Carbon Nanotubes/ko
- Synthetic Method Dependent Physicochemical Properties and Electrochemical Performance of Ni-Doped ZnO
T
- The use of urea as an N-doping 3D hierarchical preserving agent for titanium dioxide nanostructures tailored for dye-sensitized solar cells
- Transformation Induced Plasticity "TRIP" Steel
- Transformation Induced Plasticity "TRIP" Steel/es
- Transformation Induced Plasticity "TRIP" Steel/pt
- Transformation Induced Plasticity "TRIP" Steel/sv
- Transformation Induced Plasticity "TRIP" Steel/zh