bocdrondelro
Products from waste
In some cases, waste products can be used to create saleable products and generate income. See for example:
Recycling near you
Australia:
- Recycling Near You - find recycling information by area and item.
Links
- Funny Video Viral on recycling and avoiding unfortunate labels.
- A Recycling Revolution - Recycling doesn't have to be just another household chore. We can use it as an opportunity to connect with our family, raise funds for our churches and schools, and educate our students.
Subcategories
This category has the following 5 subcategories, out of 5 total.
Pages in category "Recycling"
The following 200 pages are in this category, out of 230 total.
(previous page) (next page)3
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printed improved PET bottle stripper
- 3D printing a house
- 3D printing a house/zh
D
- Design and Implementation of 3-D Printed Radiation Shields for Environmental Sensors
- Design of a low-cost mobile multispectral albedometer with geopositioning and absolute orientation
- Distributed recycling of post-consumer plastic waste in rural areas
- Distributed recycling of post-consumer plastic waste in rural areas/fr
- Dumpster diving
E
- Ecoladrillo
- Ecoladrillo/es
- Ecoladrillo/id
- Ecoladrillo/ja
- Ecoladrillo/ko
- Ecoladrillo/pl
- Ecoladrillo/sv
- Ecoladrillo/tr
- Ecoladrillo/zh
- Economic Impact of DIY Home Manufacturing of Consumer Products with Low-cost 3D Printing from Free and Open Source Designs
- Economic Impact of DIY Home Manufacturing of Consumer Products with Low-cost 3D Printing from Free and Open Source Designs/zh
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Ethical Filament Foundation
- Ethical Filament Foundation/es
- Ethical Filament Foundation/fr
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament/fr
F
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- Free store
- Fuel briquettes
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/es
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/fr
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/hu
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/ru
G
H
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding/ru
- Harvesting sheet metal
- High-shear mastication
- How to make a Tangram Puzzle from recycled materials
- How to make a Tangram Puzzle from recycled materials/es
L
- Leveraging Open Source Development Value to Increase Freedom of Movement of Highly Qualified Personnel
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament/es
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament/id
- Low cost climate station for smart agriculture applications with photovoltaic energy and wireless communication
M
- Makaa:rafiki wa mazingira, mbadala wa kuni
- Makaa:rafiki wa mazingira, mbadala wa kuni/fr
- Making a can lantern
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
- Metal reclamation and recycling of electronic waste
- Metal reclamation and recycling of electronic waste/zh
- Template:MOST-recycle
- Multi-material distributed recycling via material extrusion: recycled high density polyethylene and poly (ethylene terephthalate) mixture
O
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/fr
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/pt
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/ru
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/vi
- Open Source Cold and Hot Scientific Sheet Press for Investigating Polymer-Based Material Properties
- Open Source Waste Plastic Granulator
- Open Source Waste Plastic Granulator/ar
- Open Source Waste Plastic Granulator/es
- Open Source Waste Plastic Granulator/hu
- Open Source Waste Plastic Granulator/ja
- Open Source Waste Plastic Granulator/ru
- Open Source Waste Plastic Granulator/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing
- Open-Source Grinding Machine for Compression Screw Manufacturing/de
- Open-Source Grinding Machine for Compression Screw Manufacturing/fr
- Open-Source Grinding Machine for Compression Screw Manufacturing/it
- Open-Source Grinding Machine for Compression Screw Manufacturing/ru
- Open-Source Grinding Machine for Compression Screw Manufacturing/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing/vi
- Open-Source Grinding Machine for Compression Screw Manufacturing/zh
- Optimal use of IV-fluid bags
P
- Parras recycling and reuse gallery
- Particle Swarm Optimization of Printing Parameters for Open-Source TIG-Based Metal 3D Printing
- PET Extrusion
- PET Extrusion/cs
- PET Extrusion/es
- PET Extrusion/fa
- PET Extrusion/pl
- PET Extrusion/zh
- PET preparation protocol:MOST
- Plastic bank
- Plastic Bank Extruder v1.0
- Plastic Bank Extruder v1.0/de
- Plastic Bank Extruder v1.0/es
- Plastic Bank Extruder v1.0/ro
- Plastic Bank Extruder v1.0/ru
- Plastic bank/es
- Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
- Plastics recovery manual
- Plastics recovery manual/bn
- Plastics recovery manual/es
- Polymer environmental-friendly resin
- Polymer environmental-friendly resin/de
- Polymer environmental-friendly resin/uk
- Polymer recycling codes for distributed manufacturing with 3-D printers
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite/ru
- Producer responsibility and recycling solar photovoltaic modules
R
- RE3
- Recyclebot
- Recyclebot Cooling Fan Section
- Recyclebot Cooling Fan Section/hu
- Recyclebot v2.3
- Recyclebot v2.3/es
- Recyclebot v2.3/tr
- Recyclebot v2.3/zh
- Recyclebot/ar
- Recyclebot/es
- Recyclebot/fr
- Recyclebot/it
- Recyclebot/pt
- Recyclebot/ru
- Recyclebot/zh
- Recycled Polycarbonate and Polycarbonate/Acrylonitrile Butadiene Styrene Feedstocks for Circular Economy Product Applications with Fused Granular Fabrication-Based Additive Manufacturing
- Recycling and dengue fever in Sukunan, Indonesia
- Recycling in Japan
- Recycling in Japan/ja
- Recycling of wind turbine blades
- Recycling of wind turbine blades/ko
- Recycling organic waste
- Reduce, reuse, repair and recycle
- Reduce, reuse, repair and recycle news
- Reduce, reuse, repair and recycle news/2010-2017
- Reduce, reuse, repair and recycle news/2018-2022
- Reduce, reuse, repair and recycle news/ru
- Reduce, reuse, repair and recycle/ar
- Reduce, reuse, repair and recycle/es
- Reduce, reuse, repair and recycle/ru
- Redwood Discovery Museum inspirograph
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ar
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/cs
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/es
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/fr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/it
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ja
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pl
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pt
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ro
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ru
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/tr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/uk
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/vi
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/zh
- Repurposing shipping crate siding
S
- SALIRAJA Yurt Project
- SALIRAJA Yurt Project/es
- Salvage
- Semiconductor recycling plant case study of a-Si:H photovoltaic manufacturing
- Semiconductor recycling plant case study of CdTe photovoltaic manufacturing
- Semiconductor recycling plant case study of CIS photovoltaic manufacturing
- Semiconductor recycling plant case study of CIS photovoltaic manufacturing/ko
- Semiconductor recycling plant case study of GaAs photovoltaic manufacturing
- Semiconductor recycling plant case study of GaAs photovoltaic manufacturing - case study
- Semiconductor recycling plant case study of InGaN photovoltaic manufacturing
- SIMS E-recycling
- Sunlight oven
- Sustainability and Feasibility Assessment of Distributed E-Waste Recycling using Additive Manufacturing in a Bi-Continental Context
- Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models
- Systems Analysis for PET and Olefin Polymers in a Circular Economy
T
- Technical and Economic Viability of Distributed Recycling of Low-density Polyethylene Water Sachets into Waste Composite Pavement Blocks
- Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades
- The Potential of Replacing Concrete with Sand and Recycled Polycarbonate Composites: Compressive Strength Testing
- The Potential of Replacing Concrete with Sand and Recycled Polycarbonate Composites: Compressive Strength Testing/ru
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks
V
- Viability of Recycling Copper Indium Gallium Selenide (CIGS) in Photovoltaic Cells
- Viability of recycling semiconductors in Apple iPhone 4S
- Viability of recycling semiconductors in Apple iPhone 4S/ko
- Viability of recycling semiconductors in Dell LCD PC monitors
- Viability of recycling semiconductors in imaging devices
Media in category "Recycling"
The following 8 files are in this category, out of 8 total.
-
Bordado.jpg 1,200 × 1,600; 391 KB
-
Canguro 1.jpg 2,272 × 1,704; 828 KB
-
Canguro pana.jpg 1,600 × 1,200; 249 KB
-
Canguro.jpg 2,272 × 1,704; 784 KB
-
Canguros bordados .jpg 1,200 × 1,600; 225 KB
-
Chips2forrecycling.jpg 1,440 × 958; 129 KB
-
Dram-abs.jpg 1,641 × 886; 183 KB
-
Recyclebot.gif 600 × 238; 3.01 MB