(→2019) |
Sophivorus (talk | contribs) m (Text replacement - "[[image:" to "[[Image:") |
||
(49 intermediate revisions by 8 users not shown) | |||
Line 1: | Line 1: | ||
{{777}} | {{777 notice}} | ||
The [[RepRap]] motto is "wealth without money" - for this assignment you are to create wealth by making an open source design that has value to you. It must be 3D printable on your MOST Delta and cost less than a commercial equivalent (if such a thing exists). | The [[RepRap]] motto is "wealth without money" - for this assignment you are to create wealth by making an open source design that has value to you. It must be 3D printable on your MOST Delta and cost less than a commercial equivalent (if such a thing exists). | ||
=Assignment= | == Assignment == | ||
# Design something of "high value" that you can 3D print on your MOST Delta | |||
# Make sure someone else has not already done it - search http://www.yeggi.com/ and | # Design something of "high value" that you can 3D print on your MOST Delta | ||
# Make sure someone else has not already done it - search [https://www.yeggi.com/ http://www.yeggi.com/] and http://web.archive.org/web/20191229012720/http://www.yobi3d.com/ | |||
# Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) | # Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) | ||
# Upload your design under an OS license to https://www.myminifactory.com/ or https://libre3d.com/ - include: Source files, STLs, a picture, and a brief description including costs and $ savings. | # Upload your design under an OS license to https://www.myminifactory.com/ or https://libre3d.com/ - include: Source files, STLs, a picture, and a brief description including costs and $ savings. | ||
# Add picture, link to your MyMiniFactory or Libre3D page with name, commercial equivalent link+cost, and economic savings to table below (see example). | # Add picture, link to your MyMiniFactory or Libre3D page with name, commercial equivalent link+cost, and economic savings to table below (see example). | ||
# Print component and bring to class (online students - post a link to a short Youtube video) | # Print component and bring to class (online students - post a link to a short Youtube video) | ||
=Grading= | == Grading == | ||
* 30% Print quality | * 30% Print quality | ||
* 20% Documentation | * 20% Documentation | ||
Line 17: | Line 19: | ||
Automatic reductions: | Automatic reductions: | ||
=Table of Value= | * 50% no source or the use of non-OS software | ||
* 10% per day for late | |||
== Table of Value == | |||
== 2019 == | |||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! Digital Photo | |||
! | ! Free Design/Link to YouMagine | ||
! | ! Commercial equivalent link/Cost US$ | ||
! | ! Approximate Savings in US$ | ||
! | |||
|- | |- | ||
|- | |- | ||
|[[Image: | | [[Image:dice box full assembly 1.jpg|180px]] | ||
|[https://www.myminifactory.com/object/3d-print-107254 Parametric Dice Box] | | [https://www.myminifactory.com/object/3d-print-107254 Parametric Dice Box] | ||
| Dice boxes vary in price by a large margin. | | Dice boxes vary in price by a large margin. The printed box was designed after a standard box [https://www.google.com/shopping/product/5823008460334110300?psb=1&tbm=shop&prds=epd%3A6930614802905256882%2Cprmr%3A3&ved=0CCIQ0FUoAGoXChMI75Ph-KGv5gIVaxQKAx0UIg4IEAI] that costs $9.99. The printed box costs only $0.92 to print, having a saving percentile of 90.8%. | ||
|- | |- | ||
|[[Image:BLG BigMoney.JPG|180px]] | | [[Image:BLG BigMoney.JPG|180px]] | ||
| [https://www.myminifactory.com/object/3d-print-107268 Ice Fishing Drink Holder] | | [https://www.myminifactory.com/object/3d-print-107268 Ice Fishing Drink Holder] | ||
| No commercial equivalent (perhaps a [https://www.puristcollective.com/collections/all/products/mover-18oz high quality thermos for $48]) | | No commercial equivalent (perhaps a [https://www.puristcollective.com/collections/all/products/mover-18oz high quality thermos for $48]) | ||
| This ice fishing drink holder features telescoping cylinders that immerse drinks within water through a hole in the ice, keeping them cold but preventing them from freezing while ice fishing. The top of the holder can be held against the ice via a weight, screws, or bolts. Cost: $12.12, Cost savings: $35.88 (versus the thermos). I have been offered $30 for this device, or a profit of $17.88 per device. | | This ice fishing drink holder features telescoping cylinders that immerse drinks within water through a hole in the ice, keeping them cold but preventing them from freezing while ice fishing. The top of the holder can be held against the ice via a weight, screws, or bolts. Cost: $12.12, Cost savings: $35.88 (versus the thermos). I have been offered $30 for this device, or a profit of $17.88 per device. | ||
|- | |- | ||
|- | |- | ||
|- | |- | ||
|[[Image:Seal puller.jpg|200px]] | | [[Image:Seal puller.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107262 Seal Puller] | | [https://www.myminifactory.com/object/3d-print-107262 Seal Puller] | ||
| [https://www.motionpro.com/product/08-0712 Motion Pro Seal Puller $45.99] | | [https://www.motionpro.com/product/08-0712 Motion Pro Seal Puller $45.99] | ||
| Printed pieces cost: $1.32, Cost savings: $44.67. This cost is for one handle and 3 different sized heads. Many different size and shape heads could be printed for this handle for different applications. A future project could make the heads fully parametric. | | Printed pieces cost: $1.32, Cost savings: $44.67. This cost is for one handle and 3 different sized heads. Many different size and shape heads could be printed for this handle for different applications. A future project could make the heads fully parametric. | ||
|- | |- | ||
Line 51: | Line 54: | ||
|- | |- | ||
|- | |- | ||
|[[Image: | | [[Image:Camera Slider.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107270 Open Source Camera Slider] | | [https://www.myminifactory.com/object/3d-print-107270 Open Source Camera Slider] | ||
| [https://www.amazon.com/Motorized-ASHANKS-Bluetooth-Electric-Panoramic/dp/B0813K4PH4/ref=sr_1_11?keywords=motorized+camera+slider&qid=1576132299&s=electronics&sr=1-11 Motorized Camera Slider $400.00] [https://www.bhphotovideo.com/c/product/1484258-REG/gvm_gvm_3d_3_axis_motorized_video.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI%3A514&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nNWL94TKgTfW4NForkkXOedNC2nGPCs5wl3QBhru2oIhrIYuJ2h5MBoC9XAQAvD_BwE higher end camera slider $1000.00] | | [https://www.amazon.com/Motorized-ASHANKS-Bluetooth-Electric-Panoramic/dp/B0813K4PH4/ref=sr_1_11?keywords=motorized+camera+slider&qid=1576132299&s=electronics&sr=1-11 Motorized Camera Slider $400.00] [https://www.bhphotovideo.com/c/product/1484258-REG/gvm_gvm_3d_3_axis_motorized_video.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI%3A514&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nNWL94TKgTfW4NForkkXOedNC2nGPCs5wl3QBhru2oIhrIYuJ2h5MBoC9XAQAvD_BwE higher end camera slider $1000.00] | ||
| Total Cost: ~$60.00, Cost savings: $340.00. The cost savings for this is huge compared to buying a cheap one on Amazon. There are other versions of sliders that cost well over $1000 on there as well. Here is the link to my page to talk more about the slider [[Open Source Camera Slider]]. | | Total Cost: ~$60.00, Cost savings: $340.00. The cost savings for this is huge compared to buying a cheap one on Amazon. There are other versions of sliders that cost well over $1000 on there as well. Here is the link to my page to talk more about the slider [[Open Source Camera Slider]]. | ||
|- | |- | ||
|- | |- | ||
|[[Image:Cactus print.jpg|200px]] | | [[Image:Cactus print.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-cactus-taco-holder-107265 Cactus Taco Holder] | | [https://www.myminifactory.com/object/3d-print-cactus-taco-holder-107265 Cactus Taco Holder] | ||
| [https://www.amazon.com/MSC-International-52034-Cactus-Holders/dp/B07N41V2TW/ref=sr_1_3?keywords=cactus+taco+holder&qid=1576128760&sr=8-3 Value: $8.49 for 4] | | [https://www.amazon.com/MSC-International-52034-Cactus-Holders/dp/B07N41V2TW/ref=sr_1_3?keywords=cactus+taco+holder&qid=1576128760&sr=8-3 Value: $8.49 for 4] | ||
| This object was designed to prop up your hard or soft shell taco while making or serving. The fun cactus shape provides interest and whimsy. A similar taco holder can be bought for about $9 for a pack of 4 on amazon, but this version can be printed for around $0.25 worth of filament for a cost savings of about 89%. [https://www.youtube.com/watch?v=Ab2AeodSROw youtube link] | | This object was designed to prop up your hard or soft shell taco while making or serving. The fun cactus shape provides interest and whimsy. A similar taco holder can be bought for about $9 for a pack of 4 on amazon, but this version can be printed for around $0.25 worth of filament for a cost savings of about 89%. [https://www.youtube.com/watch?v=Ab2AeodSROw youtube link] | ||
|- | |- | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image:Switch stand.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-nintendo-switch-stand-107154 Switch Stand] | | [https://www.myminifactory.com/object/3d-print-nintendo-switch-stand-107154 Switch Stand] | ||
| [https://www.amazon.com/Compact-Playstand-Nintendo-Switch-Officially-Licensed/dp/B01N9RTMWS/ref=asc_df_B01N9RTMWS/ Official Switch Stand] | | [https://www.amazon.com/Compact-Playstand-Nintendo-Switch-Officially-Licensed/dp/B01N9RTMWS/ref=asc_df_B01N9RTMWS/ Official Switch Stand] | ||
| This stand, used to support a Nintendo Switch such that the USB-C charging port is easily accessible, would cost around $1.82 in plastic to print, while commercial equivalents cost $13 or more, saving 86% of the cost. | | This stand, used to support a Nintendo Switch such that the USB-C charging port is easily accessible, would cost around $1.82 in plastic to print, while commercial equivalents cost $13 or more, saving 86% of the cost. | ||
|- | |- | ||
| [[ | | [[Image:ParametricSprue.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107260 Parametric Sprue] | | [https://www.myminifactory.com/object/3d-print-107260 Parametric Sprue] | ||
| [https://www.gesswein.com/p-11258-sprue-formers-and-rods.aspx?gclid=EAIaIQobChMI2ef-xpmv5gIVff7jBx08vAHkEAkYCyABEgIymPD_BwE $15 10mm Sprue Form] | | [https://www.gesswein.com/p-11258-sprue-formers-and-rods.aspx?gclid=EAIaIQobChMI2ef-xpmv5gIVff7jBx08vAHkEAkYCyABEgIymPD_BwE $15 10mm Sprue Form] | ||
| This parometric sprue allows for users to print a sprue in usage with match plate casting. A single sprue, on average, costs around $15, but this print will cost only around $0.16. This is a cost savings of 94%! [https://www.youtube.com/watch?v=Bzv9rT_UNvc&feature=youtu.be YouTube Link - Parometric Sprue] | | This parometric sprue allows for users to print a sprue in usage with match plate casting. A single sprue, on average, costs around $15, but this print will cost only around $0.16. This is a cost savings of 94%! [https://www.youtube.com/watch?v=Bzv9rT_UNvc&feature=youtu.be YouTube Link - Parometric Sprue] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Wrench it.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107256 Parametric Metric Allen Wrench] | | [https://www.myminifactory.com/object/3d-print-107256 Parametric Metric Allen Wrench] | ||
| [https://www.amazon.com/Sunlite-Allen-Wrench-Hex-Black/dp/B000AO9QQK/ref=sr_1_26?keywords=6mm+allen+wrench&qid=1576125658&sr=8-26 $5.28 6mm Allen Wrench Key] | | [https://www.amazon.com/Sunlite-Allen-Wrench-Hex-Black/dp/B000AO9QQK/ref=sr_1_26?keywords=6mm+allen+wrench&qid=1576125658&sr=8-26 $5.28 6mm Allen Wrench Key] | ||
| Even printing at 85% infill, it takes less than an hour and costs less than $0.20. | | Even printing at 85% infill, it takes less than an hour and costs less than $0.20. A single replacement could be around $5.00 and require you to run to a store or order online. A complete set can be around $15. This would work great in small torque applications and would be a 96% cost savings if small torque is all you need, but the biggest savings is the time. [https://www.youtube.com/watch?v=azbfJA4eadA&feature=youtu.be YouTube Link - Parametric Metric Allen Wrench] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:ATB Camera.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-dual-flash-camera-mount-107253 Dual Flash Camera Mount] | | [https://www.myminifactory.com/object/3d-print-dual-flash-camera-mount-107253 Dual Flash Camera Mount] | ||
| [https://www.amazon.com/SMALLRIG-A7RII-A7SII-Cable-Rosette/dp/B071P15K3Q/ref=pd_sbs_421_24?_encoding=UTF8&pd_rd_i=B071P15K3Q&pd_rd_r=3af97931-f6ec-49a5-ad07-f885cd416719&pd_rd_w=uk2Za&pd_rd_wg=RvWnE&pf_rd_p=5873ae95-9063-4a23-9b7e-eafa738c2269&pf_rd_r=SE90XJM8HGGAR9ZC6A52&psc=1&refRID=SE90XJM8HGGAR9ZC6A52 $135.99 Camera Flash Mount] | | [https://www.amazon.com/SMALLRIG-A7RII-A7SII-Cable-Rosette/dp/B071P15K3Q/ref=pd_sbs_421_24?_encoding=UTF8&pd_rd_i=B071P15K3Q&pd_rd_r=3af97931-f6ec-49a5-ad07-f885cd416719&pd_rd_w=uk2Za&pd_rd_wg=RvWnE&pf_rd_p=5873ae95-9063-4a23-9b7e-eafa738c2269&pf_rd_r=SE90XJM8HGGAR9ZC6A52&psc=1&refRID=SE90XJM8HGGAR9ZC6A52 $135.99 Camera Flash Mount] | ||
| This flash mount allows the user to mount two DSLR camera flashes to the 1/4-20 thread screws found on most cameras. The cost to print this was around 3$ plus a 0.25$ bolt that most people would have laying around the house. Also comes with a stand to hold the camera. 98% Savings. [https://www.youtube.com/watch?v=WWmxHQghiUk Youtube Link] | | This flash mount allows the user to mount two DSLR camera flashes to the 1/4-20 thread screws found on most cameras. The cost to print this was around 3$ plus a 0.25$ bolt that most people would have laying around the house. Also comes with a stand to hold the camera. 98% Savings. [https://www.youtube.com/watch?v=WWmxHQghiUk Youtube Link] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Bully Dog Tuner Dash Mount.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-2007-2013-chevy-gmc-silverado-sierra-bully-dog-tuner-dash-mount-107255 2013 Silverado Dash Mount for Bully Dog Tuner] | | [https://www.myminifactory.com/object/3d-print-2007-2013-chevy-gmc-silverado-sierra-bully-dog-tuner-dash-mount-107255 2013 Silverado Dash Mount for Bully Dog Tuner] | ||
|The Commercial equivalent costs [https://www.bullydog.com/Products/accessory/bd/110/a-pillar-pod-mount-silveradosierra-wspeaker-1500-07-13-2500-3500-07-14 $85] plus [https://www.66autocolor.com/GM-Chevrolet-Interior-Colors-2013-p/sem-gm2013.htm $20.50] for paint | | The Commercial equivalent costs [https://www.bullydog.com/Products/accessory/bd/110/a-pillar-pod-mount-silveradosierra-wspeaker-1500-07-13-2500-3500-07-14 $85] plus [https://www.66autocolor.com/GM-Chevrolet-Interior-Colors-2013-p/sem-gm2013.htm $20.50] for paint | ||
|The cost of this print at 25% infill and 5% supports is about $0.20 plus about $0.10 for the mounting tape. A commercial equivalent is $85 plus $20.50 for the interior paint color. This is a cost savings of $105.20 or 99.7%. [https://www.youtube.com/watch?v=2ut6rJVxM_w YouTube Link] | | The cost of this print at 25% infill and 5% supports is about $0.20 plus about $0.10 for the mounting tape. A commercial equivalent is $85 plus $20.50 for the interior paint color. This is a cost savings of $105.20 or 99.7%. [https://www.youtube.com/watch?v=2ut6rJVxM_w YouTube Link] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:IMG 0266.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-fork-alignment-tool-107261 Fork Alignment Tool] | | [https://www.myminifactory.com/object/3d-print-fork-alignment-tool-107261 Fork Alignment Tool] | ||
| [https://www.motionpro.com/product/08-0412 $34.99 Fork Alignment Tool] | | [https://www.motionpro.com/product/08-0412 $34.99 Fork Alignment Tool] | ||
| This Fork Alignment Tool only costs $2.04 to print at 25% infill with an additional $0.91 in hardware required for a total cost of $2.95. This saves $32.04 or 92% compared to the commercial equivalent. | | This Fork Alignment Tool only costs $2.04 to print at 25% infill with an additional $0.91 in hardware required for a total cost of $2.95. This saves $32.04 or 92% compared to the commercial equivalent. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Cryogenic Dewar Flask with Adjustable Lids & Retort Rod.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-cryogenic-flask-with-clamping-rod-107263 Cryogenic Dewar Flask with clamping rod] | | [https://www.myminifactory.com/object/3d-print-cryogenic-flask-with-clamping-rod-107263 Cryogenic Dewar Flask with clamping rod] | ||
| [https://www.zoro.com/chemglass-dewar-flask-1900ml-borosilicate-cg-1593-04/i/G5973633/ $350 1900ml Commercial Equivalent for Cryogenic Dewar Flask] | | [https://www.zoro.com/chemglass-dewar-flask-1900ml-borosilicate-cg-1593-04/i/G5973633/ $350 1900ml Commercial Equivalent for Cryogenic Dewar Flask] | ||
| This Cryogenic Dewar Flask comes with adjustable lids for various sizes of round bottom flasks and a retort stand for clamping other glassware. Overall cost savings sums up to ~90% for the entire package. | | This Cryogenic Dewar Flask comes with adjustable lids for various sizes of round bottom flasks and a retort stand for clamping other glassware. Overall cost savings sums up to ~90% for the entire package. Contributors - Abhijeet Patil, Saurabh Karanke, Shubham Jain | ||
|- | |- | ||
| [[ | | [[Image:Calculator Cover.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-ti-inspire-calculator-cover-107232 TI Inspire Calculator Cover] | | [https://www.myminifactory.com/object/3d-print-ti-inspire-calculator-cover-107232 TI Inspire Calculator Cover] | ||
| [https://www.amazon.com/TEXAS-INSTRUMENTS-NSPIRE-BLACK-SLIDE/dp/B009FE2R5I/ref=sr_1_3?keywords=inspire+calculator+cover&qid=1576117288&sr=8-3 $10.95 Cover] | | [https://www.amazon.com/TEXAS-INSTRUMENTS-NSPIRE-BLACK-SLIDE/dp/B009FE2R5I/ref=sr_1_3?keywords=inspire+calculator+cover&qid=1576117288&sr=8-3 $10.95 Cover] | ||
| This cover only costs $1.07 to print at 35% infill (63 grams). This saves $9.88 or 90.2% compared to the commercial equivalent. | | This cover only costs $1.07 to print at 35% infill (63 grams). This saves $9.88 or 90.2% compared to the commercial equivalent. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:20191211 202426.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107206 Parametric 12 Gauge Shotgun Phone Mount] | | [https://www.myminifactory.com/object/3d-print-107206 Parametric 12 Gauge Shotgun Phone Mount] | ||
| [https://www.amazon.com/Action-Mount-Multi-Purpose-Sportsmans-Smartphone/dp/B00V9DOU62 $32.99 Phone Mount] | | [https://www.amazon.com/Action-Mount-Multi-Purpose-Sportsmans-Smartphone/dp/B00V9DOU62 $32.99 Phone Mount] | ||
| This part only costs $0.72 to print at 50% infill (36 grams). This equates to $32.27 in savings or 97.8% savings on the commercial equivalent. | | This part only costs $0.72 to print at 50% infill (36 grams). This equates to $32.27 in savings or 97.8% savings on the commercial equivalent. | ||
|- | |- | ||
| [[ | | [[Image:Finalaf.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-pre-filter-cage-107195 Snowmobile Pre Filter Cage] [ | | [https://www.myminifactory.com/object/3d-print-pre-filter-cage-107195 Snowmobile Pre Filter Cage] [[User:Trfranck|trfranck]] | ||
| | | $84.99 CAD = $64.82 USD | ||
| It costs approximately $0.56 to print the base of the air filter cage and a metal clothes hanger costs [https://www.storesupply.com/pc-12037-500-metal-dress-hangers-with-loop-hook-chrome-24111.aspx?adgroupid=59037079613&product_id=12037&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nO6q8675OXtztryhaq2imbDNtl91LEcg-RA5a0JTOye1X8fVYW1J6BoCLmEQAvD_BwE $0.90]: Total savings of $63.36 (98%!). | | It costs approximately $0.56 to print the base of the air filter cage and a metal clothes hanger costs [https://www.storesupply.com/pc-12037-500-metal-dress-hangers-with-loop-hook-chrome-24111.aspx?adgroupid=59037079613&product_id=12037&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nO6q8675OXtztryhaq2imbDNtl91LEcg-RA5a0JTOye1X8fVYW1J6BoCLmEQAvD_BwE $0.90]: Total savings of $63.36 (98%!). | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Skate Sharpener.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-skate-sharpener-holder-107211 Skate Sharpener Guide] | | [https://www.myminifactory.com/object/3d-print-skate-sharpener-holder-107211 Skate Sharpener Guide] | ||
| [https://www.purehockey.com/product/blade-barber-model-1000-hand-held-skate-sharpening-tool/itm/40537-2/?gclid=EAIaIQobChMIsYThk9Gu5gIVh7zACh2AlwqyEAQYAiABEgINxPD_BwE $40 Skate Sharpener], | | [https://www.purehockey.com/product/blade-barber-model-1000-hand-held-skate-sharpening-tool/itm/40537-2/?gclid=EAIaIQobChMIsYThk9Gu5gIVh7zACh2AlwqyEAQYAiABEgINxPD_BwE $40 Skate Sharpener], | ||
| It costs $10.00 total for sharpener stone, screw, and guide print. The commercial equivalent is $40, costing 1/4 the retail price and $30 cheaper. [https://www.youtube.com/watch?v=icebuNBUx_s Youtube Link] | | It costs $10.00 total for sharpener stone, screw, and guide print. The commercial equivalent is $40, costing 1/4 the retail price and $30 cheaper. [https://www.youtube.com/watch?v=icebuNBUx_s Youtube Link] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Chandelier1.jpg|200px]] | ||
| [ | | [[Wine Bottle Chandelier|Wine Bottle Chandelier]] | ||
| [https://www.wayfair.com/lighting/pdp/industrial-lightworks-5-wine-bottle-chandelier-suspended-in-suspended-mount-w000469560.html $820 Commercial Wine Bottle Chandelier] | | [https://www.wayfair.com/lighting/pdp/industrial-lightworks-5-wine-bottle-chandelier-suspended-in-suspended-mount-w000469560.html $820 Commercial Wine Bottle Chandelier] | ||
| It costs $53.16 to create the entire chandelier. That is a savings of $766.84 or about 94% with additional materials remaining to make another chandelier. | | It costs $53.16 to create the entire chandelier. That is a savings of $766.84 or about 94% with additional materials remaining to make another chandelier. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Kjkurtz bigmoney reel.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-centre-pin-reel-ceramic-bearing-107217 Centre Pin Reel with Ceramic Bearings] | | [https://www.myminifactory.com/object/3d-print-centre-pin-reel-ceramic-bearing-107217 Centre Pin Reel with Ceramic Bearings] | ||
| [https://www.cabelas.com/product/OKUMA-RAW-II-CENTER-PIN/1720837.uts?productVariantId=3708269&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03791337&rid=20&ds_rl=1252079&ds_rl=1252079&gclid=EAIaIQobChMI86_Xu_Ou5gIVEdvACh04xA8mEAQYASABEgJn4_D_BwE&gclsrc=aw.ds $199.99 Reel] | | [https://www.cabelas.com/product/OKUMA-RAW-II-CENTER-PIN/1720837.uts?productVariantId=3708269&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03791337&rid=20&ds_rl=1252079&ds_rl=1252079&gclid=EAIaIQobChMI86_Xu_Ou5gIVEdvACh04xA8mEAQYASABEgJn4_D_BwE&gclsrc=aw.ds $199.99 Reel] | ||
| This part only costs $1.80 to print at 30% infill and $3.50 for the bearing. Would not trust the reel for steelhead, but would work for smaller trout. Approximate savings if it were strong enough would be 97% | | This part only costs $1.80 to print at 30% infill and $3.50 for the bearing. Would not trust the reel for steelhead, but would work for smaller trout. Approximate savings if it were strong enough would be 97% | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:CoffeeGrinder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-hand-powered-coffee-grinder-conversion-kit-107080 Coffee Grinder Conversion Kit] | | [https://www.myminifactory.com/object/3d-print-hand-powered-coffee-grinder-conversion-kit-107080 Coffee Grinder Conversion Kit] | ||
| [https://www.amazon.com/Baratza-Encore-Conical-Coffee-Grinder/dp/B007F183LK?ref_=ast_slp_dp], $139 Amazon Best Selling Electric Burr Coffee Grinder | | [https://www.amazon.com/Baratza-Encore-Conical-Coffee-Grinder/dp/B007F183LK?ref_=ast_slp_dp], $139 Amazon Best Selling Electric Burr Coffee Grinder | ||
| Any planetary motor (the best being 100 RPM) with power supply will work. The printed components only takes 76g of filament to print. My cost of filament was $1.52, so $137.50 savings (99%). If you don't have your own motor and power supply, you can pick your choice from amazon and will run around $25 in total. This reduces the cost savings to $114 (82%). YouTube link: 9tXILSS19Ps | | Any planetary motor (the best being 100 RPM) with power supply will work. The printed components only takes 76g of filament to print. My cost of filament was $1.52, so $137.50 savings (99%). If you don't have your own motor and power supply, you can pick your choice from amazon and will run around $25 in total. This reduces the cost savings to $114 (82%). YouTube link: 9tXILSS19Ps | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Motorcycle cup holder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-motorcycle-cup-holder-107204 Motorcycle cup holder] | | [https://www.myminifactory.com/object/3d-print-motorcycle-cup-holder-107204 Motorcycle cup holder] | ||
| [https://www.revzilla.com/motorcycle/ram-mounts-reservoir-cup-holder-kit?gclid=CjwKCAiAxMLvBRBNEiwAKhr-nOqUnx35bSrykQQhhWR41TVISlhrEQZdA2TtYncDvDv1MIAtW_2qgxoCQYwQAvD_BwE&gclsrc=aw.ds], $33 Revzilla cup holder | | [https://www.revzilla.com/motorcycle/ram-mounts-reservoir-cup-holder-kit?gclid=CjwKCAiAxMLvBRBNEiwAKhr-nOqUnx35bSrykQQhhWR41TVISlhrEQZdA2TtYncDvDv1MIAtW_2qgxoCQYwQAvD_BwE&gclsrc=aw.ds], $33 Revzilla cup holder | ||
| It costs near $1.00 to print. That gives a cost savings near $32. YouTube link: --gQF5NBX80 | | It costs near $1.00 to print. That gives a cost savings near $32. YouTube link: --gQF5NBX80 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:BagCap.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107107 Bag Caps] | | [https://www.myminifactory.com/object/3d-print-107107 Bag Caps] | ||
| [https://www.amazon.com/Sealing-Keeping-Storage-Sealer-Different/dp/B079J98T2D/ref=sr_1_2?keywords=bag+cap+chip&qid=1575990427&sr=8-2 Retail Price: $13] | | [https://www.amazon.com/Sealing-Keeping-Storage-Sealer-Different/dp/B079J98T2D/ref=sr_1_2?keywords=bag+cap+chip&qid=1575990427&sr=8-2 Retail Price: $13] | ||
| The cost to print this is $3.00 so the savings is $11.00 or 76% [https://www.youtube.com/watch?v=DdBnbki2_sg Youtube] | | The cost to print this is $3.00 so the savings is $11.00 or 76% [https://www.youtube.com/watch?v=DdBnbki2_sg Youtube] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Skiset.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-nordic-skate-skiing-waxing-rack-28893 Ski Waxing System] | | [https://www.myminifactory.com/object/3d-print-nordic-skate-skiing-waxing-rack-28893 Ski Waxing System] | ||
| [https://www.rei.com/product/777835/swix-nordic-travelvise-ski-vise-set ], $120 | | [https://www.rei.com/product/777835/swix-nordic-travelvise-ski-vise-set ], $120 | ||
| $115, [https://opensource.com/article/17/3/how-to-create-consumer-goods-open-hardware Essay on savings] | | $115, [https://opensource.com/article/17/3/how-to-create-consumer-goods-open-hardware Essay on savings] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Parametric piping tips.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-parametric-piping-tips-106946 Parametric Piping Tips] | | [https://www.myminifactory.com/object/3d-print-parametric-piping-tips-106946 Parametric Piping Tips] | ||
| [https://www.wilton.com/decorating-piping-tip-set-22-piece/2104-2531.html#sz=30&start=57 ], $33 | | [https://www.wilton.com/decorating-piping-tip-set-22-piece/2104-2531.html#sz=30&start=57 ], $33 | ||
| At about $1.30 to print all seven tips: You save $31.70 (%96) for a basic set. | | At about $1.30 to print all seven tips: You save $31.70 (%96) for a basic set. | ||
|- | |- | ||
| [[ | | [[Image:Big Money Project Project Portrait.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-cable-management-box-107024 Cable Management Box] | | [https://www.myminifactory.com/object/3d-print-cable-management-box-107024 Cable Management Box] | ||
| [https://www.amazon.com/dp/B01KJ371RW/ref=sspa_dk_detail_9?psc=1&pd_rd_i=B01KJ371RW&pd_rd_w=VZAJ1&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=1T1Iy&pf_rd_r=AJFGF149BQ9N7ZF7PRNJ&pd_rd_r=9f97acc8-d116-4a51-90c9-23e12fd2becc&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyU0pQMzY5UUo2RjdJJmVuY3J5cHRlZElkPUEwMjg4Njg4M0w1TDlWOFRXWFFTNSZlbmNyeXB0ZWRBZElkPUExMDI3NDQyMkFTOEdXU0YyNldHTyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= ], $23.97 | | [https://www.amazon.com/dp/B01KJ371RW/ref=sspa_dk_detail_9?psc=1&pd_rd_i=B01KJ371RW&pd_rd_w=VZAJ1&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=1T1Iy&pf_rd_r=AJFGF149BQ9N7ZF7PRNJ&pd_rd_r=9f97acc8-d116-4a51-90c9-23e12fd2becc&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyU0pQMzY5UUo2RjdJJmVuY3J5cHRlZElkPUEwMjg4Njg4M0w1TDlWOFRXWFFTNSZlbmNyeXB0ZWRBZElkPUExMDI3NDQyMkFTOEdXU0YyNldHTyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= ], $23.97 | ||
| It costs approximately $2.63 to print the cable management box: You save $21.34 (%89). Youtube Link: [https://www.youtube.com/watch?v=wKZOpUNNYOU&feature=youtu.be] | | It costs approximately $2.63 to print the cable management box: You save $21.34 (%89). Youtube Link: [https://www.youtube.com/watch?v=wKZOpUNNYOU&feature=youtu.be] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Deadlift Jack 3.png|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-106708 Deadlift Jack] | | [https://www.myminifactory.com/object/3d-print-106708 Deadlift Jack] | ||
| [https://www.amazon.com/Yes4All-Mini-Deadlift-Barbell-Handle/dp/B07H3R8F5S/ref=sr_1_4?dchild=1&keywords=deadlift+jack&qid=1575569390&sr=8-4], $42 | | [https://www.amazon.com/Yes4All-Mini-Deadlift-Barbell-Handle/dp/B07H3R8F5S/ref=sr_1_4?dchild=1&keywords=deadlift+jack&qid=1575569390&sr=8-4], $42 | ||
Line 180: | Line 183: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Use.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107043 Adjustable Ream] | | [https://www.myminifactory.com/object/3d-print-107043 Adjustable Ream] | ||
| [https://www.grainger.com/product/WESTWARD-Adjustable-Blade-Hand-Reamer-4LGR4], 20$ | | [https://www.grainger.com/product/WESTWARD-Adjustable-Blade-Hand-Reamer-4LGR4], 20$ | ||
| It costs in total about 1 dollar for the print hardware and glue so we are saving 19$ | | It costs in total about 1 dollar for the print hardware and glue so we are saving 19$ | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Obentobox.png|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-obento-box-107081 Customizable Obento Box] | | [https://www.myminifactory.com/object/3d-print-obento-box-107081 Customizable Obento Box] | ||
| [https://www.amazon.com/Kotobuki-2-Tiered-Rabbit-Cherry-Blossom/dp/B00CS1OGFY/ref=sr_1_12?keywords=obento+box&qid=1575953824&sr=8-12], $24.95 | | [https://www.amazon.com/Kotobuki-2-Tiered-Rabbit-Cherry-Blossom/dp/B00CS1OGFY/ref=sr_1_12?keywords=obento+box&qid=1575953824&sr=8-12], $24.95 | ||
| It costs in total about $1.08 dollars and takes 54 grams of filament for 2 boxes, lids, and separator. Savings: $23.87, 96% savings. [https://www.youtube.com/watch?v=zRIxJlNAh9Y&t=6s Youtube Link] | | It costs in total about $1.08 dollars and takes 54 grams of filament for 2 boxes, lids, and separator. Savings: $23.87, 96% savings. [https://www.youtube.com/watch?v=zRIxJlNAh9Y&t=6s Youtube Link] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:IMG 5438.JPG|200px]] | ||
| [[Pineapple Self-Watering Planter]] | | [[Pineapple Self-Watering Planter]] | ||
| [https://www.wayfair.com/outdoor/pdp/truezoo-pineapple-ceramic-pot-planter-tzto1015.html?piid=], $18.99 | | [https://www.wayfair.com/outdoor/pdp/truezoo-pineapple-ceramic-pot-planter-tzto1015.html?piid=], $18.99 | ||
| It costs in total about $1.22 dollars and takes 61 grams of filament for 2 pieces of the planter. And this is comparing it with a planter that isn't a self-watering one. Savings: $17.77, 93.58% savings | | It costs in total about $1.22 dollars and takes 61 grams of filament for 2 pieces of the planter. And this is comparing it with a planter that isn't a self-watering one. Savings: $17.77, 93.58% savings | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Armagloader2.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107112 PMAG Loader] | | [https://www.myminifactory.com/object/3d-print-107112 PMAG Loader] | ||
| [https://www.midwayusa.com/product/1015161542], $26.95 | | [https://www.midwayusa.com/product/1015161542], $26.95 | ||
| Total cost is ~85 cents, with ~58 cents of plastic being used at the 30% infill I printed at, I had a clevis pin laying around but am assuming a 27 cent cost for a clevis pin if sourced from McMaster Carr as a worst case scenario, for a total savings of ~$26.10 over the closest commercial equivalent. | | Total cost is ~85 cents, with ~58 cents of plastic being used at the 30% infill I printed at, I had a clevis pin laying around but am assuming a 27 cent cost for a clevis pin if sourced from McMaster Carr as a worst case scenario, for a total savings of ~$26.10 over the closest commercial equivalent. Video for being an online student [https://www.youtube.com/watch?v=i9PejiVafJg here] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:DominonBaseCardBox.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-dominion-base-card-set-container-107118 Dominion base card compact holder] | | [https://www.myminifactory.com/object/3d-print-dominion-base-card-set-container-107118 Dominion base card compact holder] | ||
| [https://www.amazon.com/Rio-Grande-Games-Dominion-Cards/dp/B007MKLX84], $19.99 full price, $12.99 on sale | | [https://www.amazon.com/Rio-Grande-Games-Dominion-Cards/dp/B007MKLX84], $19.99 full price, $12.99 on sale | ||
| The total cost for the two pieces is around $1.94 for 97g of filament. | | The total cost for the two pieces is around $1.94 for 97g of filament. The base card set from Dominion (with cards included, I had my own) is priced around $19.99 or $12.99 normally. This is a savings of 90% full price ($18.05), and 85% ($11.05) on sale. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:IMG 8472 v2.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-nordic-ski-binding-mount-jig-107303 Nordic ski binding jig (self-clamping)] | | [https://www.myminifactory.com/object/3d-print-nordic-ski-binding-mount-jig-107303 Nordic ski binding jig (self-clamping)] | ||
| [https://utahskigear.com/shop/salomon-sns-profil-xc-ski-binding-jig/ ], Not sold commercially, but you can find one used for '''$45-60''' if you're lucky. | | [https://utahskigear.com/shop/salomon-sns-profil-xc-ski-binding-jig/ ], Not sold commercially, but you can find one used for '''$45-60''' if you're lucky. | ||
| Expect the print to cost $2.00 at 20% infill. That gives a cost savings of 96% over buying an old used jig, and you save the time of hunting it down on random buy/sell pages. | | Expect the print to cost $2.00 at 20% infill. That gives a cost savings of 96% over buying an old used jig, and you save the time of hunting it down on random buy/sell pages. | ||
Using a jig to mount your bindings is extremely helpful for proper hole placement. Without the use of a jig, it takes much longer to correctly place the mounting holes. The jig sets perfect alignment every time and greatly speeds up the process. There is currently one OS binding jig, and it does not have a clamping mechanism and does not align itself to the ski. See [https://www.thingiverse.com/thing:2756823/files here]. The new design both clamps and aligns. To properly use, print the base plate (two separate pieces that connect) then print two clamps and connect them to the base plate's extruded tabs. See the myminifactory link for more details. | Using a jig to mount your bindings is extremely helpful for proper hole placement. Without the use of a jig, it takes much longer to correctly place the mounting holes. The jig sets perfect alignment every time and greatly speeds up the process. There is currently one OS binding jig, and it does not have a clamping mechanism and does not align itself to the ski. See [https://www.thingiverse.com/thing:2756823/files here]. The new design both clamps and aligns. To properly use, print the base plate (two separate pieces that connect) then print two clamps and connect them to the base plate's extruded tabs. See the myminifactory link for more details. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:TSpineRoller.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-t-spine-muscle-roller-with-wall-mount-107123 T spine Muscle Roller + Wall Mount] | | [https://www.myminifactory.com/object/3d-print-t-spine-muscle-roller-with-wall-mount-107123 T spine Muscle Roller + Wall Mount] | ||
| [https://www.roguefitness.com/mobility-wod-gemini?prod_id=8413&gclid=EAIaIQobChMI7dq-0bqm5gIVi4bACh38iASfEAQYAyABEgJ6OPD_BwE], 40$ | | [https://www.roguefitness.com/mobility-wod-gemini?prod_id=8413&gclid=EAIaIQobChMI7dq-0bqm5gIVi4bACh38iASfEAQYAyABEgJ6OPD_BwE], 40$ | ||
| It costs around $16.20 to print for a savings of $23.80, that is a savings of 83.25%. The wall mount costs around $25 but only $12.80 to print + the few cents for mounting bolts. [https://www.youtube.com/watch?v=4PB0ZY-sgeo T Spine Muscle Roller Youtube Video] | | It costs around $16.20 to print for a savings of $23.80, that is a savings of 83.25%. The wall mount costs around $25 but only $12.80 to print + the few cents for mounting bolts. [https://www.youtube.com/watch?v=4PB0ZY-sgeo T Spine Muscle Roller Youtube Video] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:20191212 125833.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107322 On Camera Storage] | | [https://www.myminifactory.com/object/3d-print-107322 On Camera Storage] | ||
| [https://www.amazon.com/Battery-Waterproof-Shockproof-Organizer-Batteries/dp/B07H933S13], $12 | | [https://www.amazon.com/Battery-Waterproof-Shockproof-Organizer-Batteries/dp/B07H933S13], $12 | ||
| It costs $2 to print for a savings of $10.00, that is a savings of 83.33%. Another advantage is the ability to attach this compartment to the camera. no need to carry another bag or stuff your pockets.[https://www.youtube.com/watch?v=32GA9elo900&feature=youtu.be On Camera Storage Compartment Video] | | It costs $2 to print for a savings of $10.00, that is a savings of 83.33%. Another advantage is the ability to attach this compartment to the camera. no need to carry another bag or stuff your pockets.[https://www.youtube.com/watch?v=32GA9elo900&feature=youtu.be On Camera Storage Compartment Video] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:JPlug.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-jplug-107126 JPlug] | | [https://www.myminifactory.com/object/3d-print-jplug-107126 JPlug] | ||
| | | A typical plug can run about $10. | ||
| This design costs about $0.30 with 5 wall linings and a 25% infill. | | This design costs about $0.30 with 5 wall linings and a 25% infill. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Prototype caliper.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-custom-brake-caliper-107139 Prototype Caliper] | | | ||
[https://www.myminifactory.com/object/3d-print-custom-brake-caliper-107139 Prototype Caliper] | |||
| Since this is a custom design made by our team there are no commercial equivalents. Though material would cost around $118 plus machine time and tooling would price this probably around $250+ | | Since this is a custom design made by our team there are no commercial equivalents. Though material would cost around $118 plus machine time and tooling would price this probably around $250+ | ||
| This design costs about $0.29 for the brace, $0.50 for the main body, and $0.19 for the pistons. So using that the whole caliper plus some bolts puts the total cost of the prototype at about $1.50. Resulting in a $248.50 savings (99.4%) per iteration. [https://www.youtube.com/watch?v=jhf8b2Lwcvs&feature=youtu.be Project Video] | | This design costs about $0.29 for the brace, $0.50 for the main body, and $0.19 for the pistons. So using that the whole caliper plus some bolts puts the total cost of the prototype at about $1.50. Resulting in a $248.50 savings (99.4%) per iteration. [https://www.youtube.com/watch?v=jhf8b2Lwcvs&feature=youtu.be Project Video] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Silverware holder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/edit/107140 Silverware Holder] | | [https://www.myminifactory.com/object/edit/107140 Silverware Holder] | ||
| [https://www.walmart.com/ip/Neat-O-Kitchen-Dish-Drainer-PP-Utensil-Holder-Silverware-Cup-Basket-White/832744761?wmlspartner=wlpa&selectedSellerId=7061&adid=22222222227240409773&wl0=&wl1=g&wl2=c&wl3=339533832878&wl4=pla-485664910455&wl5=9017742&wl6=&wl7=&wl8=&wl9=pla&wl10=115070363&wl11=online&wl12=832744761&veh=sem&gclid=EAIaIQobChMIsKXx4Mis5gIVkp6fCh3SzQfQEAkYASABEgLCH_D_BwE] A typical silverware holder to hook onto a dish drainer can cost about $9. | | [https://www.walmart.com/ip/Neat-O-Kitchen-Dish-Drainer-PP-Utensil-Holder-Silverware-Cup-Basket-White/832744761?wmlspartner=wlpa&selectedSellerId=7061&adid=22222222227240409773&wl0=&wl1=g&wl2=c&wl3=339533832878&wl4=pla-485664910455&wl5=9017742&wl6=&wl7=&wl8=&wl9=pla&wl10=115070363&wl11=online&wl12=832744761&veh=sem&gclid=EAIaIQobChMIsKXx4Mis5gIVkp6fCh3SzQfQEAkYASABEgLCH_D_BwE] A typical silverware holder to hook onto a dish drainer can cost about $9. | ||
| This design costs about $1.50 and it is wider to accommodate a bigger dish rack. youtube video: [https://www.youtube.com/watch?v=zqbK04P5U6I] | | This design costs about $1.50 and it is wider to accommodate a bigger dish rack. youtube video: [https://www.youtube.com/watch?v=zqbK04P5U6I] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:carpetslider.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-exercise-carpet-slider-107141] | | [https://www.myminifactory.com/object/3d-print-exercise-carpet-slider-107141] | ||
| https://www.power-systems.com/shop/product/slidez, $31.04 | | https://web.archive.org/web/20210302030002/https://www.power-systems.com/shop/product/slidez, $31.04 | ||
| | | The commercial equivalent for this product is linked above. It costs $31.04 for a set. This cost to print a set of these exercise carpet sliders is approximately $2.82, assuming a price of $20 per kg of PLA. This is a savings of $28.22 per set or a 91% cost reduction. A video of this product can be found here: https://www.youtube.com/watch?v=UHaDGk-ZslU | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image: Cast Iron Pan Mold.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107143 Cast Iron Pan Mold] | | [https://www.myminifactory.com/object/3d-print-107143 Cast Iron Pan Mold] | ||
| No commercial equivalent | | No commercial equivalent | ||
| This consumed 115 grams in filament and can be printed at 25%, but with editing the models can change, wood glue $2, need access to foundry for: Green Sand, Gray Iron (for pouring cast iron pan), [ | | This consumed 115 grams in filament and can be printed at 25%, but with editing the models can change, wood glue $2, need access to foundry for: Green Sand, Gray Iron (for pouring cast iron pan), [[Cast Iron Mold Pan|Check out more about the pan mold here]] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:HubToolJNB.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107185 Hub Lock/Unlock Tool] | | [https://www.myminifactory.com/object/3d-print-107185 Hub Lock/Unlock Tool] | ||
| No commercial equivalent | | No commercial equivalent | ||
Line 265: | Line 269: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image: Drinking Shotgun Shell.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107136 Drinking Shotgun Shell] | | [https://www.myminifactory.com/object/3d-print-107136 Drinking Shotgun Shell] | ||
| [https://officialusadrinkingteam.com/products/the-shotgun-shell] The Shotgun Shell here is sold for a retail value of $29.99 | | [https://officialusadrinkingteam.com/products/the-shotgun-shell] The Shotgun Shell here is sold for a retail value of $29.99 | ||
Line 271: | Line 275: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image: BallMountNPFrame.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-gas-tank-mount-phone-holder-base-107191 Tank mount phone holder base] | | [https://www.myminifactory.com/object/3d-print-gas-tank-mount-phone-holder-base-107191 Tank mount phone holder base] | ||
| [https://www.rammount.com/part/RAM-B-410U ], $31.99 | | [https://www.rammount.com/part/RAM-B-410U], $31.99 | ||
| $0.30 in PLA and electricity costs 99% cost savings | | $0.30 in PLA and electricity costs 99% cost savings | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Dirt Bike Phone Mount.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-dirt-bike-phone-mount-107192 Dirt Bike Phone Mount] | | [https://www.myminifactory.com/object/3d-print-dirt-bike-phone-mount-107192 Dirt Bike Phone Mount] | ||
| [https://www.motosport.com/ram-mounts-universal-spring-loaded-cell-phone-holder?variant], ~$18 | | [https://www.motosport.com/ram-mounts-universal-spring-loaded-cell-phone-holder?variant], ~$18 | ||
Line 283: | Line 287: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Tlfedor monogrammed holder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107197 Monogram Jewelry Holder] | | [https://www.myminifactory.com/object/3d-print-107197 Monogram Jewelry Holder] | ||
| [https://www.pbteen.com/products/script-monogram-wall-storage/?catalogId=21&sku=5515473&cm_ven=PLA&cm_cat=Google&cm_pla=Storage%20%26%20Decor%20%3E%20Jewelry%20%2B%20Beauty%20Organizers&cm_ite=5515473&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nJ81xXt-5Kf3jLQxc4vs83H80wzeYLp9YtD6-GEBQRD4hFQiSckisBoC1e4QAvD_BwE], ~$149 for something 3x the size, or roughly $50 for something of a similar size | | [https://www.pbteen.com/products/script-monogram-wall-storage/?catalogId=21&sku=5515473&cm_ven=PLA&cm_cat=Google&cm_pla=Storage%20%26%20Decor%20%3E%20Jewelry%20%2B%20Beauty%20Organizers&cm_ite=5515473&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nJ81xXt-5Kf3jLQxc4vs83H80wzeYLp9YtD6-GEBQRD4hFQiSckisBoC1e4QAvD_BwE], ~$149 for something 3x the size, or roughly $50 for something of a similar size | ||
Line 289: | Line 293: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Tee Driver.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-preset-or-consistent-tees-for-golf-107200 Consistent Golf Tees]] | | [https://www.myminifactory.com/object/3d-print-preset-or-consistent-tees-for-golf-107200 Consistent Golf Tees]] | ||
| [https://www.amazon.com/Consistent-Tee-Golf-Packs-Pink/dp/B06WVHCDS8/ref=sr_1_9?dchild=1&gclid=EAIaIQobChMIrJG42ceu5gIVSdbACh0-8Qt7EAAYASAAEgKMg_D_BwE&hvadid=192428607251&hvdev=c&hvlocphy=9017741&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=3496056354076237373&hvtargid=kwd-302219337759&hydadcr=6888_9603945&keywords=consistent+golf+tees&qid=1576100452&sr=8-9 These tees cost $14] | | [https://www.amazon.com/Consistent-Tee-Golf-Packs-Pink/dp/B06WVHCDS8/ref=sr_1_9?dchild=1&gclid=EAIaIQobChMIrJG42ceu5gIVSdbACh0-8Qt7EAAYASAAEgKMg_D_BwE&hvadid=192428607251&hvdev=c&hvlocphy=9017741&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=3496056354076237373&hvtargid=kwd-302219337759&hydadcr=6888_9603945&keywords=consistent+golf+tees&qid=1576100452&sr=8-9 These tees cost $14] | ||
Line 301: | Line 305: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Bow hook pic.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-tree-stand-bow-hook-107207 Tree Stand Bow Hook] | | [https://www.myminifactory.com/object/3d-print-tree-stand-bow-hook-107207 Tree Stand Bow Hook] | ||
| [https://www.bigcountrysportinggoods.com/summit-tree-stands-universal-bow-holder-85134/?utm_source=googleshopping&utm_medium=cse&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nMbExQCCfRbaf97fp-yav2YAnCGHJ_KQjm71mf_hXAWvCrxJL8X5lBoCWgUQAvD_BwE Similar products cost about $20] | | [https://www.bigcountrysportinggoods.com/summit-tree-stands-universal-bow-holder-85134/?utm_source=googleshopping&utm_medium=cse&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nMbExQCCfRbaf97fp-yav2YAnCGHJ_KQjm71mf_hXAWvCrxJL8X5lBoCWgUQAvD_BwE Similar products cost about $20] | ||
Line 319: | Line 323: | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:zsa gunholster.png|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107172 Gun holster] | | [https://www.myminifactory.com/object/3d-print-107172 Gun holster] | ||
|The commercial equivalent, costs [https://www.concealmentexpress.com/products/smith-wesson-mpshield-holster ~$37.00.] | | The commercial equivalent, costs [https://www.concealmentexpress.com/products/smith-wesson-mpshield-holster ~$37.00.] | ||
|The cost to print my holster is ~$1.74 and requires 2 printed parts, 2 bolts, and 2 nuts. My design is a 95.3% cost reduction and has decent strength being printed with PETg | | The cost to print my holster is ~$1.74 and requires 2 printed parts, 2 bolts, and 2 nuts. My design is a 95.3% cost reduction and has decent strength being printed with PETg | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Table leveler.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107222 Tool-free Table Leveler] | | [https://www.myminifactory.com/object/3d-print-107222 Tool-free Table Leveler] | ||
|The commercial equivalent, costs [https://www.grainger.com/product/14H392?cm_mmc=PPC:+Google+PLA $40.80] for 4 of them. | | The commercial equivalent, costs [https://www.grainger.com/product/14H392?cm_mmc=PPC:+Google+PLA $40.80] for 4 of them. | ||
|The cost to print enough parts for a four legged table is ~$1.06 (assuming two shims per leg). My design is a 97.4% cost reduction over the commercial equivalent. [https://www.youtube.com/watch?v=TeUMRk6ARBg&feature=youtu.be Link to YouTube video] | | The cost to print enough parts for a four legged table is ~$1.06 (assuming two shims per leg). My design is a 97.4% cost reduction over the commercial equivalent. [https://www.youtube.com/watch?v=TeUMRk6ARBg&feature=youtu.be Link to YouTube video] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Athena Frame Cinch.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107213 Athena Frame Cinch] | | [https://www.myminifactory.com/object/3d-print-107213 Athena Frame Cinch] | ||
| The commercial equivalent, costs [https://www.homedepot.com/p/Everbilt-4-Zinc-Plated-Steel-Screw-Eye-25-Pack-803662/204273859 ~$8.70.] | | The commercial equivalent, costs [https://www.homedepot.com/p/Everbilt-4-Zinc-Plated-Steel-Screw-Eye-25-Pack-803662/204273859 ~$8.70.] | ||
| The cost to print is ~$0.65 and requires 6 printed parts, para-cord, and a turnbuckle. There is a 92.5% cost reduction. | | The cost to print is ~$0.65 and requires 6 printed parts, para-cord, and a turnbuckle. There is a 92.5% cost reduction. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Hook1.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107219 Cubicle Hook] | | [https://www.myminifactory.com/object/3d-print-107219 Cubicle Hook] | ||
| The commercial equivalent, costs [https://www.officedepot.com/a/products/764772/Office-Depot-Brand-Cubicle-Coat-Hook/?cm_mmc=PLA-_-Google-_-Office_Decor-_-764772&ds_rl=1256068&gclid=EAIaIQobChMIpMPn6veu5gIVysDACh2uZw-8EAQYFSABEgLKMPD_BwE&gclsrc=aw.ds ~$6.99.] | | The commercial equivalent, costs [https://www.officedepot.com/a/products/764772/Office-Depot-Brand-Cubicle-Coat-Hook/?cm_mmc=PLA-_-Google-_-Office_Decor-_-764772&ds_rl=1256068&gclid=EAIaIQobChMIpMPn6veu5gIVysDACh2uZw-8EAQYFSABEgLKMPD_BwE&gclsrc=aw.ds ~$6.99.] | ||
| The cost to print is ~$0.80 and has a cost savings of 88% | | The cost to print is ~$0.80 and has a cost savings of 88% [https://www.youtube.com/watch?v=vn2bCWLIhHss Youtube Link] | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Golf divot tool.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-divot-tool-with-ball-marker-and-hat-clip-107218 Golf divot tool with ball marker and hat clip] | | [https://www.myminifactory.com/object/3d-print-divot-tool-with-ball-marker-and-hat-clip-107218 Golf divot tool with ball marker and hat clip] | ||
| The commercial equivalent, costs [https://www.pgatoursuperstore.com/divot-tool-w%2Fcap-clip-3-mrks/1104802.html?cgid=golf-gear-accessories-ball-markers ~$14.99.] | | The commercial equivalent, costs [https://www.pgatoursuperstore.com/divot-tool-w%2Fcap-clip-3-mrks/1104802.html?cgid=golf-gear-accessories-ball-markers ~$14.99.] | ||
| The cost to print is ~$0.06 with 2 parts. There is a 99% cost reduction. | | The cost to print is ~$0.06 with 2 parts. There is a 99% cost reduction. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Woodworkers Detail Hammer Pic.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-woodworker-s-detail-mallet-custom-107229 Woodworkers Detail Mallet] | | [https://www.myminifactory.com/object/3d-print-woodworker-s-detail-mallet-custom-107229 Woodworkers Detail Mallet] | ||
| The commercial equivalent, costs [https://www.google.com/search?rlz=1C1GCEB_enUS870US871&biw=1920&bih=937&tbm=shop&ei=u3_xXeKyF8iPtAby3pmIBQ&q=wood+carvers+mallet&oq=wood+carver&gs_l=psy-ab-sh.1.3.0l9j0i10k1.7520.10879.0.14866.11.10.0.1.1.0.70.604.10.10.0....0...1c.1.64.psy-ab-sh..0.11.605...0i67k1.0.R0e65cpF-Ak ~$15-$50.] | | The commercial equivalent, costs [https://www.google.com/search?rlz=1C1GCEB_enUS870US871&biw=1920&bih=937&tbm=shop&ei=u3_xXeKyF8iPtAby3pmIBQ&q=wood+carvers+mallet&oq=wood+carver&gs_l=psy-ab-sh.1.3.0l9j0i10k1.7520.10879.0.14866.11.10.0.1.1.0.70.604.10.10.0....0...1c.1.64.psy-ab-sh..0.11.605...0i67k1.0.R0e65cpF-Ak ~$15-$50.] | ||
| The cost to print is ~$1.32 and it's customizable. There is a 92%-99% cost reduction. | | The cost to print is ~$1.32 and it's customizable. There is a 92%-99% cost reduction. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Rsimpson BigMoney.jpeg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107258 Military Challenge Coin Holder] | | [https://www.myminifactory.com/object/3d-print-107258 Military Challenge Coin Holder] | ||
|The commercial equivalent costs [https://www.etsy.com/listing/639297769/military-challenge-coin-display-rack-us?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=military+coin+holder&ref=sr_gallery-1-3&frs=1 up to $140]. | | The commercial equivalent costs [https://www.etsy.com/listing/639297769/military-challenge-coin-display-rack-us?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=military+coin+holder&ref=sr_gallery-1-3&frs=1 up to $140]. | ||
|The cost to print this part is ~$1.25, which is over a 99% cost savings | | The cost to print this part is ~$1.25, which is over a 99% cost savings | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Ice Mug Mold.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107233] | | [https://www.myminifactory.com/object/3d-print-107233] | ||
| The commercial equivalent, costs [https://nicemug.com/nice-mug-shop/?v=7516fd43adaa ~$55.] | | The commercial equivalent, costs [https://nicemug.com/nice-mug-shop/?v=7516fd43adaa ~$55.] | ||
| The cost to print is ~$5. There is a 65% cost reduction. (Note, do not print in ABS, ABS is toxic and not food safe.) | | The cost to print is ~$5. There is a 65% cost reduction. (Note, do not print in ABS, ABS is toxic and not food safe.) | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:apboerma cameragrip.png|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-sony-nex-a5000-a6000-hand-shroud-107242 Sony NEX/a5000/a6000 Hand Shroud] | | [https://www.myminifactory.com/object/3d-print-sony-nex-a5000-a6000-hand-shroud-107242 Sony NEX/a5000/a6000 Hand Shroud] | ||
| Commercial equivalent, the Peak Design Clutch, costs about [https://www.peakdesign.com/products/clutch ~$40.]. The material cost is about $2 between plastic and accessories, making this about a 95% cost savings. | | Commercial equivalent, the Peak Design Clutch, costs about [https://www.peakdesign.com/products/clutch ~$40.]. The material cost is about $2 between plastic and accessories, making this about a 95% cost savings. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Jcpaulse BigMoney2.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107244 Fire Extinguisher Mount] | | [https://www.myminifactory.com/object/3d-print-107244 Fire Extinguisher Mount] | ||
|The commercial equivalent, costs [https://www.webstaurantstore.com/buckeye-vehicle-marine-bracket-for-10-lb-15-lb-fire-extinguishers/472700228.html ~$30.99]. | | The commercial equivalent, costs [https://www.webstaurantstore.com/buckeye-vehicle-marine-bracket-for-10-lb-15-lb-fire-extinguishers/472700228.html ~$30.99]. | ||
|The cost to print both parts is ~$3.45, which is a 89% cost reduction. The personal value I get from this comes from my house passing its insurance inspection. [https://www.youtube.com/watch?v=3P_ec8dNSEM Youtube Link] | | The cost to print both parts is ~$3.45, which is a 89% cost reduction. The personal value I get from this comes from my house passing its insurance inspection. [https://www.youtube.com/watch?v=3P_ec8dNSEM Youtube Link] | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Bike Chain Tensioner.jpg|200px]] | ||
|[https://www.thingiverse.com/thing:4041364 | | [https://www.thingiverse.com/thing:4041364 Customizable Bike Chain Tensioner] | ||
|The commercial equivalent, costs [https://www.amazon.com/B-Labs-C-Guide-Eco-Chain-Tensioner/dp/B00HZRCZBS?ref_=fsclp_pl_dp_3 ~$38.60]. | | The commercial equivalent, costs [https://www.amazon.com/B-Labs-C-Guide-Eco-Chain-Tensioner/dp/B00HZRCZBS?ref_=fsclp_pl_dp_3 ~$38.60]. | ||
|The cost to print part is ~$0.60, which is a 98.4% cost reduction. | | The cost to print part is ~$0.60, which is a 98.4% cost reduction. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:DnD Floor And Wall Grid.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-d-d-snap-grid-floor-and-wall-tiles-107259 | | [https://www.myminifactory.com/object/3d-print-d-d-snap-grid-floor-and-wall-tiles-107259 DnD Floor and Wall Grid] | ||
|The commercial equivalent, costs [https://www.amazon.com/Locking-Dungeon-Tiles-Miniatures-Paintable/dp/B07GJZ7GGN/ref=sr_1_1_sspa?keywords=dungeon+tiles&qid=1576125743&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTUg4UDIyVkZJVlFYJmVuY3J5cHRlZElkPUEwNzg2MzM0M01BUUFPMFAzRjg2TCZlbmNyeXB0ZWRBZElkPUEwNTQ5MTkxUVZLU01HQTFQWDZSJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== ~$20 to 30]. | | The commercial equivalent, costs [https://www.amazon.com/Locking-Dungeon-Tiles-Miniatures-Paintable/dp/B07GJZ7GGN/ref=sr_1_1_sspa?keywords=dungeon+tiles&qid=1576125743&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTUg4UDIyVkZJVlFYJmVuY3J5cHRlZElkPUEwNzg2MzM0M01BUUFPMFAzRjg2TCZlbmNyeXB0ZWRBZElkPUEwNTQ5MTkxUVZLU01HQTFQWDZSJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== ~$20 to 30]. | ||
|The cost to print part is ~$0.20 per tile, which is a 87% cost reduction. | | The cost to print part is ~$0.20 per tile, which is a 87% cost reduction. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Dlbrinks x108g mount.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-xiegu-x108g-mounting-bracket-107267 | | [https://www.myminifactory.com/object/3d-print-xiegu-x108g-mounting-bracket-107267 Xiegu x108g Ham Radio Mount][https://www.youtube.com/watch?v=9FDH6_Xmhuo] | ||
|No commercial equivalent. Commercial equivalent for other radio models, ~$30.00. | | No commercial equivalent. Commercial equivalent for other radio models, ~$30.00. | ||
|The cost to print part is ~$0.45, which is a savings of 98.5% from commercial radio mounts. | | The cost to print part is ~$0.45, which is a savings of 98.5% from commercial radio mounts. | ||
|- | |- | ||
|- | |- | ||
|[[File:AAK Door Sign.JPG| 200px]] | | [[File:AAK Door Sign.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-door-sign-with-braille-107273 | | [https://www.myminifactory.com/object/3d-print-door-sign-with-braille-107273 Door Sign with Braille] | ||
|The commercial equivalent, costs [https://www.mydoorsign.com/customizable-braille-glowing-sign/sku-sb-0289g?engine=googlebase&keyword=&skuid=SB-0289G-TT-GLO-BRL-06x06-C&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nAsrH2lLiGzBJUTJHfkWI1ZZ7IZNsBs_IE9YGAsu5qidOo2XKreYExoCy-QQAvD_BwE ~$17.77]. | | The commercial equivalent, costs [https://www.mydoorsign.com/customizable-braille-glowing-sign/sku-sb-0289g?engine=googlebase&keyword=&skuid=SB-0289G-TT-GLO-BRL-06x06-C&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nAsrH2lLiGzBJUTJHfkWI1ZZ7IZNsBs_IE9YGAsu5qidOo2XKreYExoCy-QQAvD_BwE ~$17.77]. | ||
|The cost to print part is ~$1.16, which is a 93.5% cost reduction. | | The cost to print part is ~$1.16, which is a 93.5% cost reduction. | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:big money final.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107280 Ball joint for MOST Delta] | | [https://www.myminifactory.com/object/3d-print-107280 Ball joint for MOST Delta] | ||
| No equivalent that I have seen | | No equivalent that I have seen | ||
| This is me [https://www.appropedia.org/User:Irbeaudo]. Total cost for one is $0.02 so to put one on every joint is not even a quarter. I chose this because I have been having troubles with my rods falling off during prints all semester. I believe there are better ways to make this but i just wanted one I could glue right onto the part for simplicity sake. | | This is me [https://www.appropedia.org/User:Irbeaudo]. Total cost for one is $0.02 so to put one on every joint is not even a quarter. I chose this because I have been having troubles with my rods falling off during prints all semester. I believe there are better ways to make this but i just wanted one I could glue right onto the part for simplicity sake. Video for being an online student [https://www.youtube.com/watch?v=1apkzi2Tuw0&feature=youtu.be here] | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:3-D Printable Speaker.JPG|200px]] | ||
|[[3-D Printable Speaker Demo]]; [https://www.myminifactory.com/object/3d-print-3-d-printable-speaker-107278 Part Files] | | [[3-D Printable Speaker Demo]]; [https://www.myminifactory.com/object/3d-print-3-d-printable-speaker-107278 Part Files] | ||
|Desktop speakers cost upwards of [https://www.amazon.com/PC-Speakers-Computer-Add-Ons-Computers/b?ie=UTF8&node=172471 $20] | | Desktop speakers cost upwards of [https://www.amazon.com/PC-Speakers-Computer-Add-Ons-Computers/b?ie=UTF8&node=172471 $20] | ||
|The cost to print and build is ~$1.25/speaker, about 5% of the cost of a similar speaker. This has more educational value as a speaker demo, but also offers usable audio quality for someone on a budget. ([[3-D Printable Speaker Demo|Video on project page]]) | | The cost to print and build is ~$1.25/speaker, about 5% of the cost of a similar speaker. This has more educational value as a speaker demo, but also offers usable audio quality for someone on a budget. ([[3-D Printable Speaker Demo|Video on project page]]) | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Cooper Holder.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107291 Part Files] | | [https://www.myminifactory.com/object/3d-print-107291 Part Files] | ||
|Non-Custom Car Phone mounts [https://www.amazon.com/JunDa-360-Degree-Rotation-Smartphones-Dashboard/dp/B07P1GHNBZ?ref_=Oct_MWishedForC_7072562011_4&pf_rd_r=JHVTKFDSC60S75XENNCW&pf_rd_p=7260765b-b56d-5d59-a6ce-25eb33a7e633&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=7072562011&pf_rd_m=ATVPDKIKX0DER $11] and up | | Non-Custom Car Phone mounts [https://www.amazon.com/JunDa-360-Degree-Rotation-Smartphones-Dashboard/dp/B07P1GHNBZ?ref_=Oct_MWishedForC_7072562011_4&pf_rd_r=JHVTKFDSC60S75XENNCW&pf_rd_p=7260765b-b56d-5d59-a6ce-25eb33a7e633&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=7072562011&pf_rd_m=ATVPDKIKX0DER $11] and up | ||
|The cost to print is ~$1.30 for both parts, about 12% of the cost of a lower end mount. As noted this is custom for a mini cooper so it will fit better than any other mount. | | The cost to print is ~$1.30 for both parts, about 12% of the cost of a lower end mount. As noted this is custom for a mini cooper so it will fit better than any other mount. [https://www.youtube.com/watch?v=Bf9ESWv0rxs | Video Link] ] | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:FlashMount.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-flash-mount-for-softbox-107296 Flash Holder Mount for Softbox] | | [https://www.myminifactory.com/object/3d-print-flash-mount-for-softbox-107296 Flash Holder Mount for Softbox] | ||
| [https://www.amazon.com/gp/product/B07BJLJY84/ref=ox_sc_act_title_1?smid=A3UR7DPRN11I7Y&psc=1 ], Commercial Equivalent to my design. However my current softbox can not support this adapter, so i would need to buy a whole new set to use a flash. [https://www.bhphotovideo.com/c/product/1005757-REG/westcott_2035_rapid_box_26_octa.html], Commercial version of softbox flash set approx $170. | | [https://www.amazon.com/gp/product/B07BJLJY84/ref=ox_sc_act_title_1?smid=A3UR7DPRN11I7Y&psc=1], Commercial Equivalent to my design. However my current softbox can not support this adapter, so i would need to buy a whole new set to use a flash. [https://www.bhphotovideo.com/c/product/1005757-REG/westcott_2035_rapid_box_26_octa.html], Commercial version of softbox flash set approx $170. | ||
|This design allows me to use my current flash with my softboxes eliminating the need to buy a new set, found here [https://www.bhphotovideo.com/c/product/1005757-REG/westcott_2035_rapid_box_26_octa.html]. My current solution is to have another tripod with the flash pointing into the soft box. This design allows the flash and the softbox to be mounted on the same tripod, allowing me to set up more softboxes, and reduces the footprint they take up. | | This design allows me to use my current flash with my softboxes eliminating the need to buy a new set, found here [https://www.bhphotovideo.com/c/product/1005757-REG/westcott_2035_rapid_box_26_octa.html]. My current solution is to have another tripod with the flash pointing into the soft box. This design allows the flash and the softbox to be mounted on the same tripod, allowing me to set up more softboxes, and reduces the footprint they take up. | ||
[https://www.youtube.com/watch?v=yAFQqk1Yd6Y | Youtube Link] ] | |||
Printed in PLA, totalling to a cost of $0.50 dollars, with a weight of 25g. Commercial equivalents cost upwards of $150, leading to a cost reduction of 99.7% and a savings of $150. | Printed in PLA, totalling to a cost of $0.50 dollars, with a weight of 25g. Commercial equivalents cost upwards of $150, leading to a cost reduction of 99.7% and a savings of $150. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:bottleRings1.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107264 Bottle Holder] | | [https://www.myminifactory.com/object/3d-print-107264 Bottle Holder] | ||
|There is no commercial equivalent that I found, when researching I mostly found mounting types of holders, nothing freestanding and customizable. | | There is no commercial equivalent that I found, when researching I mostly found mounting types of holders, nothing freestanding and customizable. | ||
|This product is designed as completely parametric in OpenSCAD so the cost can widely vary. The design that I have shown here and in the video used about 16 grams of PLA costing around $0.27. | | This product is designed as completely parametric in OpenSCAD so the cost can widely vary. The design that I have shown here and in the video used about 16 grams of PLA costing around $0.27. [https://www.youtube.com/watch?v=uHeM5LkL7-w | Youtube Video] | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Bigmoneyshowerdolly.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107279 Shower Caddy] | | [https://www.myminifactory.com/object/3d-print-107279 Shower Caddy] | ||
| [https://www.amazon.com/InterDesign-Shelves-Bronze-10-inches-Bathroom-Shelves/dp/B003OBY5MG/ref=sr_1_4?keywords=shower+caddy&qid=1576160439&sr=8-4 ], Commercial equivalent on Amazon $19.13 | | | ||
|My printed two shelf shower caddy used 129g of PLA filament, equivalent to a cost of $2.58. This results in $16.55 in savings from the commercial equivalent. YouTube link to video | [https://www.amazon.com/InterDesign-Shelves-Bronze-10-inches-Bathroom-Shelves/dp/B003OBY5MG/ref=sr_1_4?keywords=shower+caddy&qid=1576160439&sr=8-4], Commercial equivalent on Amazon $19.13 | ||
| My printed two shelf shower caddy used 129g of PLA filament, equivalent to a cost of $2.58. This results in $16.55 in savings from the commercial equivalent. YouTube link to video [https://www.youtube.com/watch?v=2etm-aVmXE0 | here]. | |||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:fourwaytuberack.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-4-way-interlocking-tube-rack-107125 4-way Interlocking Tube Rack] | | [https://www.myminifactory.com/object/3d-print-4-way-interlocking-tube-rack-107125 4-way Interlocking Tube Rack] | ||
|Commercial equivalents can run $10 to $15 each (based on Fisher Scientific) | | Commercial equivalents can run $10 to $15 each (based on Fisher Scientific) | ||
|Designed in OpenSCAD, this print costs about $5 total in PLA and fits together without any part cleaning | | Designed in OpenSCAD, this print costs about $5 total in PLA and fits together without any part cleaning | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Regolith Extrude.jpg|200px]] | ||
| [[stonehenge]] | | [[stonehenge]] | ||
| N/A (New Technology) | | N/A (New Technology) | ||
| N/A. New Tech. for usage on planetary bodies with a powdery top layer. Intends to be used to make small tools and structures on these planetary bodies using the natural materials present. | | N/A. New Tech. for usage on planetary bodies with a powdery top layer. Intends to be used to make small tools and structures on these planetary bodies using the natural materials present. | ||
Line 453: | Line 458: | ||
|- | |- | ||
| [[Image: JCS 3859.png | 200px]] | | [[Image: JCS 3859.png|200px]] | ||
| [https://www.thingiverse.com/thing:4039778] | | [https://www.thingiverse.com/thing:4039778] | ||
| New Technology -- Commercial Snow Ball Maker $10 - $15, Haven't seen a Snow Man Maker. | | New Technology -- Commercial Snow Ball Maker $10 - $15, Haven't seen a Snow Man Maker. | ||
| 3D printed Snow Man Maker. All parametric, cost dependent on the size of the Snow Men, expected cost <$7 | | 3D printed Snow Man Maker. All parametric, cost dependent on the size of the Snow Men, expected cost <$7 | ||
|- | |- | ||
|- | |- | ||
|[[Image:Bullseye Cup.JPG|200px]] | | [[Image:Bullseye Cup.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-107304 Bullseye Cup(Golf)] | | [https://www.myminifactory.com/object/3d-print-107304 Bullseye Cup(Golf)] | ||
|[https://www.dickssportinggoods.com/p/eyeline-golf-bullseye-cup-putting-aid-19elgulbllsycpxxxtrn/19elgulbllsycpxxxtrn Eyeline Golf Bullseye Cup Putting Aid, $15] | | [https://www.dickssportinggoods.com/p/eyeline-golf-bullseye-cup-putting-aid-19elgulbllsycpxxxtrn/19elgulbllsycpxxxtrn Eyeline Golf Bullseye Cup Putting Aid, $15] | ||
| Costed me just over $3 to print, which is a cost savings of close to 80% [https://www.youtube.com/watch?v=XgewDR6Mmj8 Link to Youtube video] | | Costed me just over $3 to print, which is a cost savings of close to 80% [https://www.youtube.com/watch?v=XgewDR6Mmj8 Link to Youtube video] | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: 20191212 111350.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107266 Disc Golf Midrange Mini] | | [https://www.myminifactory.com/object/3d-print-107266 Disc Golf Midrange Mini] | ||
| [https://infinitediscs.com/Products/Mini-Discs/12211/Mini-Buzzz Similar Mini Disc, $7,99] | | [http://web.archive.org/web/20161024071904/https://infinitediscs.com/Products/Mini-Discs/12211/Mini-Buzzz Similar Mini Disc, $7,99] | ||
| Cost to print is $0.68, making for a savings of 91.5% | | Cost to print is $0.68, making for a savings of 91.5% | ||
|- | |- | ||
Line 478: | Line 483: | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Ajv ammobox.PNG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-locking-ammunition-container-100x9mm-luger-107312 Locking Ammunition Container (100x9mm Luger)] | | [https://www.myminifactory.com/object/3d-print-locking-ammunition-container-100x9mm-luger-107312 Locking Ammunition Container (100x9mm Luger)] | ||
|The commercial equivalent costs [https://www.amazon.com/Sheffield-Plastic-Utility-Caliber-Storage/dp/B07B1QH4BQ/ref=sr_1_12?crid=103FVRPVS6CAR&dchild=1&keywords=plano+ammo+box&qid=1576170021&sprefix=plano+ammo%2Caps%2C429&sr=8-12 ~$13.15] for the box plus a $3.17 MasterLock | | The commercial equivalent costs [https://www.amazon.com/Sheffield-Plastic-Utility-Caliber-Storage/dp/B07B1QH4BQ/ref=sr_1_12?crid=103FVRPVS6CAR&dchild=1&keywords=plano+ammo+box&qid=1576170021&sprefix=plano+ammo%2Caps%2C429&sr=8-12 ~$13.15] for the box plus a $3.17 MasterLock | ||
|The cost to print my container is ~$4.28 and requires a MasterLock for $3.17. My design is a 43% cost reduction and has better usability for its sliding action that allows the user to dispense small amounts of rounds quickly. | | The cost to print my container is ~$4.28 and requires a MasterLock for $3.17. My design is a 43% cost reduction and has better usability for its sliding action that allows the user to dispense small amounts of rounds quickly. | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Cabinet pull.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-labelled-cabinet-knob-drawer-pull-107319 Customizable Labelled Drawer or Cabinet Knobs (My Mini Factory)][https://www.thingiverse.com/thing:4043054 See on Thingiverse too] | | [https://www.myminifactory.com/object/3d-print-labelled-cabinet-knob-drawer-pull-107319 Customizable Labelled Drawer or Cabinet Knobs (My Mini Factory)][https://www.thingiverse.com/thing:4043054 See on Thingiverse too] | ||
| [https://www.etsy.com/listing/676275031/label-slot-library-index-card-drawer?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=label+drawer+pulls&ref=sc_gallery-1-2&plkey=8c6cbd727d3566632dbe9b0c4733f49c1def12df%3A676275031 Drawer Pull with index card label - $10] | | [https://www.etsy.com/listing/676275031/label-slot-library-index-card-drawer?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=label+drawer+pulls&ref=sc_gallery-1-2&plkey=8c6cbd727d3566632dbe9b0c4733f49c1def12df%3A676275031 Drawer Pull with index card label - $10] | ||
| Cost to print is $0.24 + Command Strip($0.50), True Value: ~$8, so 91% savings per item. | | Cost to print is $0.24 + Command Strip($0.50), True Value: ~$8, so 91% savings per item. I printed 5, for 5 separate cabinets. [https://www.youtube.com/watch?v=JW4PPZHrKbw Link to YouTube Video] | ||
|- | |- | ||
|- | |- | ||
Line 493: | Line 498: | ||
| [https://www.myminifactory.com/object/3d-print-super-simple-croquet-mallet-head-107311] | | [https://www.myminifactory.com/object/3d-print-super-simple-croquet-mallet-head-107311] | ||
| [https://www.amazon.com/Six-Player-Croquet-Mallets-Colored-Carrying/dp/B00H57W4PA/ref=sr_1_1_sspa?crid=1CTF74SO3505C&keywords=franklin+croquet+set&qid=1576170179&s=sporting-goods&sprefix=franklin+croqu%2Csporting%2C263&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZM1NQWjUwNzA5WjgmZW5jcnlwdGVkSWQ9QTA2ODc4MDQzMVdTQzZON1dKOUZGJmVuY3J5cHRlZEFkSWQ9QTA1MDkyNzQxUURFMjc0QUFZUFNYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== $40 for whole set including 6 mallets and other stuff (on sale), $50 regular price] | | [https://www.amazon.com/Six-Player-Croquet-Mallets-Colored-Carrying/dp/B00H57W4PA/ref=sr_1_1_sspa?crid=1CTF74SO3505C&keywords=franklin+croquet+set&qid=1576170179&s=sporting-goods&sprefix=franklin+croqu%2Csporting%2C263&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZM1NQWjUwNzA5WjgmZW5jcnlwdGVkSWQ9QTA2ODc4MDQzMVdTQzZON1dKOUZGJmVuY3J5cHRlZEFkSWQ9QTA1MDkyNzQxUURFMjc0QUFZUFNYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== $40 for whole set including 6 mallets and other stuff (on sale), $50 regular price] | ||
| Cost to print is $4.44 which could be a bit pricey if you need six ($26.64 for six mallets ==> cost savings $13.36 (if set on sale) or $23.36 savings regular price. ), but beats having to buy a whole new set to replace a mallet or two. | | Cost to print is $4.44 which could be a bit pricey if you need six ($26.64 for six mallets ==> cost savings $13.36 (if set on sale) or $23.36 savings regular price. ), but beats having to buy a whole new set to replace a mallet or two. (Equivalent (regular price) $50.00/set containing six mallets and balls). For rod, use an old broomstick and cut into ~24 inch sections. Could be modified to use less plastic by optimizing infill parameters and their effects on mechanical properties. Croquet is a big summertime hobby of mine and the mallet did not break when I hit an actual croquet ball with it so I might try it out in play! [https://www.youtube.com/watch?v=sPPEQnuGx74&feature=youtube video]. | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Under Camera Lense mount.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107326] | | [https://www.myminifactory.com/object/3d-print-107326] | ||
| [https://www.adorama.com/lclcm.html?gclid=CjwKCAiA58fvBRAzEiwAQW-hzWjPo1lj-JVnsBdAgQc3A-L9nVN311otXNZ4OF_W3dOESBirRYqbshoC8K8QAvD_BwE Leica Lens Carrier M Base price $245 On sale for $189] | | [https://www.adorama.com/lclcm.html?gclid=CjwKCAiA58fvBRAzEiwAQW-hzWjPo1lj-JVnsBdAgQc3A-L9nVN311otXNZ4OF_W3dOESBirRYqbshoC8K8QAvD_BwE Leica Lens Carrier M Base price $245 On sale for $189] | ||
Line 502: | Line 507: | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Planet Holder.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-twilight-imperium-3rd-edition-parts-holder-107345] | | [https://www.myminifactory.com/object/3d-print-twilight-imperium-3rd-edition-parts-holder-107345] | ||
| [https://www.etsy.com/listing/621202926/twilight-imperium-4th-edition-board-game?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=twilight+imperium&ref=sr_gallery-1-7&col=1 Twilight Imperium Parts holder for sale on Etsy price $90] | | [https://www.etsy.com/listing/621202926/twilight-imperium-4th-edition-board-game?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=twilight+imperium&ref=sr_gallery-1-7&col=1 Twilight Imperium Parts holder for sale on Etsy price $90] | ||
Line 508: | Line 513: | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Pleco Cave Expandable.PNG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-expandable-pleco-cave-107397 Adjustable Pleco Cave] | | [https://www.myminifactory.com/object/3d-print-expandable-pleco-cave-107397 Adjustable Pleco Cave] | ||
| [https://www.google.com/shopping/product/4775049984155165556 Pleco caves can be anywhere from $5 to $20+] | | [https://www.google.com/shopping/product/4775049984155165556 Pleco caves can be anywhere from $5 to $20+] | ||
Line 514: | Line 519: | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Swflynn pos.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-107417 Point of Sale (POS) System] | | [https://www.myminifactory.com/object/3d-print-107417 Point of Sale (POS) System] | ||
| [https://squareup.com/shop/hardware/us/en/products/ipad-pos-stand-credit-card-reader Square POS for ~$530] | | [https://squareup.com/shop/hardware/us/en/products/ipad-pos-stand-credit-card-reader Square POS for ~$530] | ||
| Full cost of system: $130. (For a full breakdown of costs see My Mini Factory). [https://www.appropedia.org/User:Swflynn], [https://www.youtube.com/watch?v=IkbMNbTy7Zw | | Full cost of system: $130. (For a full breakdown of costs see My Mini Factory). [https://www.appropedia.org/User:Swflynn], [https://www.youtube.com/watch?v=IkbMNbTy7Zw Youtube Video] | ||
|- | |- | ||
|- | |- | ||
| [[Image: | | [[Image: Cat fountain 3.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-adjustable-cat-fountain-107438 Cat Fountain] | | [https://www.myminifactory.com/object/3d-print-adjustable-cat-fountain-107438 Cat Fountain] | ||
| [https://www.amazon.com/dp/B0037NKDSG/ref=twister_B07BHP7D7Y?_encoding=UTF8&th=1 Stainless steel fountain $35] | | [https://www.amazon.com/dp/B0037NKDSG/ref=twister_B07BHP7D7Y?_encoding=UTF8&th=1 Stainless steel fountain $35] | ||
| Full cost of fountain $8.80 ([https://www.amazon.com/gp/product/B00Y2533PI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 $6 - water pump], $2.80 - filament, $0.00 - bowl ) Savings of $26.2 or 75% [https://www.appropedia.org/User:Pierce_Mayville], [https://www.youtube.com/watch?v=0SDTo0Y1wSc&feature=youtu.be | | Full cost of fountain $8.80 ([https://www.amazon.com/gp/product/B00Y2533PI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 $6 - water pump], $2.80 - filament, $0.00 - bowl ) Savings of $26.2 or 75% [https://www.appropedia.org/User:Pierce_Mayville], [https://www.youtube.com/watch?v=0SDTo0Y1wSc&feature=youtu.be Youtube video showing fountain running] | ||
|- | |- | ||
|- | |||
| [[Image: teshawar goggle frame.png|200px]] | |||
| [https://www.myminifactory.com/object/3d-print-snow-goggle-frame-107250 Snow Goggle Frame] | |||
| [https://www.oakley.com/en-us/product/W0OO7099S Oakley Fall Line XL Goggles $190] | |||
| Cost estimate: $2.04 for frame (based on 102g of PLA at $20/kg), $8.97 for [https://www.amazon.com/SKL-Snowboard-Frameless-Protection-Interchangeable/dp/B0814F8VZB/ref=sr_1_4?dchild=1&keywords=snow+goggle+strap&qid=1576121603&sr=8-4 strap], and lens made from scrap plastic from tool packaging. Total of $11.01. 94.2% cost savings. | |||
|- | |||
|- | |||
| [[Image:Automatic Coil Winder.jpeg|200px]] | |||
| [https://www.myminifactory.com/object/3d-print-automatic-coil-winder-107797 Automatic Coil Winder for Linear Generator] | |||
| [https://www.amazon.com/MXBAOHENG-Variable-Winding-Machine-2-Directions/dp/B074DRVVKN/ref=pd_day0_hl_469_1/135-1314732-1009036?_encoding=UTF8&pd_rd_i=B074DRVVKN&pd_rd_r=07bd2c83-d1fd-488f-9737-fe1163433db0&pd_rd_w=35gKs&pd_rd_wg=Exf3d&pf_rd_p=0501877d-5f8c-4ec8-9861-e0476eecc53e&pf_rd_r=FW6MA7CV10T8MR7WPCY9&psc=1&refRID=FW6MA7CV10T8MR7WPCY9 Bi-directional Coil Winder, $249.00] | |||
| Cost estimate: 235.5cm^3, 1.24g/cm^3, $20 per kg, comes to $5.84. 2 M3x8 screws, NEMA17 motor, L298 stepper driver board, and Arduino Uno R3 for a total of $40.84. cost savings of 83.6%. | |||
|} | |} | ||
==2018== | == 2018 == | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! | ! Digital Photo | ||
! | ! Free Design/Link to YouMagine | ||
! | ! Commercial equivalent link/Cost US$ | ||
! | ! Approximate Savings in US$ | ||
|- | |- | ||
| [[ | | [[Image:Skiset.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-nordic-skate-skiing-waxing-rack-28893 Ski Waxing System] | | [https://www.myminifactory.com/object/3d-print-nordic-skate-skiing-waxing-rack-28893 Ski Waxing System] | ||
| [https://www.rei.com/product/777835/swix-nordic-travelvise-ski-vise-set ], $120 | | [https://www.rei.com/product/777835/swix-nordic-travelvise-ski-vise-set], $120 | ||
| $115, [https://opensource.com/article/17/3/how-to-create-consumer-goods-open-hardware Essay on savings] | | $115, [https://opensource.com/article/17/3/how-to-create-consumer-goods-open-hardware Essay on savings] | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:BTJ Oculus2.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-oculus-rift-fan-mount-81170 Oculus fan] | | [https://www.myminifactory.com/object/3d-print-oculus-rift-fan-mount-81170 Oculus fan] | ||
|[https://www.thingiverse.com/thing:2704559],<<Closest existing fan system but requires modification to the headset. No commercial equivalent | | [https://www.thingiverse.com/thing:2704559],<<Closest existing fan system but requires modification to the headset. No commercial equivalent | ||
|*Access to a soldering iron | | *Access to a soldering iron | ||
*2x AAA batteries: $3.00 | |||
*12V radial blower fan: $3.00 | * 2x AAA batteries: $3.00 | ||
*Filament: $0.41 | * 12V radial blower fan: $3.00 | ||
*~2 paper clips: pennies | * Filament: $0.41 | ||
* ~2 paper clips: pennies | |||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Admitche BigMoney.jpeg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-sony-w-series-battery-holder-81221 Sony Battery Holder] | | [https://www.myminifactory.com/object/3d-print-sony-w-series-battery-holder-81221 Sony Battery Holder] | ||
(Future Charging Station) | (Future Charging Station) | ||
|[https://www.sony.com/electronics/interchangeable-lens-cameras-batteries-chargers/bc-trw], OEM Commercial Equivalent, $50 | | [https://www.sony.com/electronics/interchangeable-lens-cameras-batteries-chargers/bc-trw], OEM Commercial Equivalent, $50 | ||
| $44 | | $44 | ||
(88%) | (88%) | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:IMG 20181212 181951.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-dial-gauge-holder-for-athenaii-printer-81229 AthenaII dial gauge holder] | | [https://www.myminifactory.com/object/3d-print-dial-gauge-holder-for-athenaii-printer-81229 AthenaII dial gauge holder] | ||
| No Commercial Equivalent | | No Commercial Equivalent | ||
| No purchase savings, but it can save time when troubleshooting bed leveling issues. | | No purchase savings, but it can save time when troubleshooting bed leveling issues. | ||
Line 571: | Line 588: | ||
|- | |- | ||
|[[ | | [[Image:AR1510RoundMagazineLoader.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-ar15-10-round-magazine-loader-81239 10 Round AR15 Magazine Loader] | | [https://www.myminifactory.com/object/3d-print-ar15-10-round-magazine-loader-81239 10 Round AR15 Magazine Loader] | ||
|[https://www.midwayusa.com/product/781394/maglula-magazine-loader-benchloader-ar-15-pmag-usgi-hk-416-sa-80-30-round-magazine] Commercial Equivalent, ~$133 | | [https://www.midwayusa.com/product/781394/maglula-magazine-loader-benchloader-ar-15-pmag-usgi-hk-416-sa-80-30-round-magazine] Commercial Equivalent, ~$133 | ||
| ~132 Cost savings plus smaller range friendly size | | ~132 Cost savings plus smaller range friendly size | ||
|- | |- | ||
|- | |- | ||
|[[File:AncientDragon.JPG|200px]] | | [[File:AncientDragon.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-ancient-dragon-low-poly-81252] | | [https://www.myminifactory.com/object/3d-print-ancient-dragon-low-poly-81252] | ||
|[https://www.miniaturemarket.com/ddiconredloose.html], Commercial Equivalent $5-400 (Scale and Paint Quality Based) | | [https://www.miniaturemarket.com/ddiconredloose.html], Commercial Equivalent $5-400 (Scale and Paint Quality Based) | ||
| ~$2.34 To Print, Endless use of model and blender knowledge for future projects. | | ~$2.34 To Print, Endless use of model and blender knowledge for future projects. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:HockeyShaftGrip.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-hockey-stick-grip-81228 Hockey Stick Grip] | | [https://www.myminifactory.com/object/3d-print-hockey-stick-grip-81228 Hockey Stick Grip] | ||
|[https://www.purehockey.com/product/buttendz-twirl-88-stick-grip/itm/27105-2/?gclid=Cj0KCQiAgMPgBRDDARIsAOh3uyIs5D1fSAU6XdDG6qvTVPA7VTncLWQC3w5od5gbmF8xTneUejoRuRQaAhsOEALw_wcB] OEM Commercial Equivalent, $25 | | [https://www.purehockey.com/product/buttendz-twirl-88-stick-grip/itm/27105-2/?gclid=Cj0KCQiAgMPgBRDDARIsAOh3uyIs5D1fSAU6XdDG6qvTVPA7VTncLWQC3w5od5gbmF8xTneUejoRuRQaAhsOEALw_wcB] OEM Commercial Equivalent, $25 | ||
| $1 | | $1 | ||
(96%) | (96%) | ||
Line 593: | Line 610: | ||
|- | |- | ||
|[[ | | [[Image:Rcdriftcar.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-rc-drift-car-prototype-i-81233 RC Drift Chassis] | | [https://www.myminifactory.com/object/3d-print-rc-drift-car-prototype-i-81233 RC Drift Chassis] | ||
|[https://www.hobbytown.com/mst-ms01d-1-10-scale-4wd-brushless-rtr-drift-car-w-nissan-r34-gtr-body-mxs-533009/p636113] Commercial Equivalent, ~$370 | | [https://www.hobbytown.com/mst-ms01d-1-10-scale-4wd-brushless-rtr-drift-car-w-nissan-r34-gtr-body-mxs-533009/p636113] Commercial Equivalent, ~$370 | ||
|Print time of 40+ hours and ~2kg material ($25) 94% Savings | | Print time of 40+ hours and ~2kg material ($25) 94% Savings | ||
|- | |- | ||
|[[ | | [[Image:Nebostand.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-flashlight-stand-81234] | | [https://www.myminifactory.com/object/3d-print-flashlight-stand-81234] | ||
| No commercial equivalent, close estimate is around $10-$15 from Nebo flashlights on amazon that have a charging base vs those that don't. [https://www.amazon.com/s/ref=nb_sb_noss_1/000-0000000-8675309?url=search-alias%3Daps&field-keywords=big+larry+pro] | | No commercial equivalent, close estimate is around $10-$15 from Nebo flashlights on amazon that have a charging base vs those that don't. [https://www.amazon.com/s/ref=nb_sb_noss_1/000-0000000-8675309?url=search-alias%3Daps&field-keywords=big+larry+pro] | ||
|Print time of about 50 minutes and cost of $0.24 based on $20/kg and 12g of filament, an approximate savings would be around $9.76 if one existed for this flashlight. | | Print time of about 50 minutes and cost of $0.24 based on $20/kg and 12g of filament, an approximate savings would be around $9.76 if one existed for this flashlight. | ||
|- | |- | ||
| [[ | | [[Image:rotobrush and drill.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-ski-waxing-rotobrush-handle-81237 Ski Waxing Rotobrush Handle] | | [https://www.myminifactory.com/object/3d-print-ski-waxing-rotobrush-handle-81237 Ski Waxing Rotobrush Handle] | ||
| [https://www.amazon.com/dp/B002V9QOFS/ref=sxts_kp_bs_tr_1?pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=ZArnY&pf_rd_r=5265PRE13H2YGG12DNYK&pd_rd_i=B002V9QOFS&pd_rd_w=v7BxH&pd_rd_r=27b1a255-2da5-47a4-93b2-fce876762404&ie=UTF8&qid=1544662863&sr=1], $100 | | [https://www.amazon.com/dp/B002V9QOFS/ref=sxts_kp_bs_tr_1?pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=ZArnY&pf_rd_r=5265PRE13H2YGG12DNYK&pd_rd_i=B002V9QOFS&pd_rd_w=v7BxH&pd_rd_r=27b1a255-2da5-47a4-93b2-fce876762404&ie=UTF8&qid=1544662863&sr=1], $100 | ||
| Overall Cost - $13.16 | | Overall Cost - $13.16 | ||
Savings of 87% | Savings of 87% | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:PapernetShim.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81236 Shim designed for Papernet paper towel dispensers] [[User:BradleyLarson|BradleyLarson]] ([[User talk:BradleyLarson|talk]]) 07:42, 13 December 2018 (PST) | | [https://www.myminifactory.com/object/3d-print-81236 Shim designed for Papernet paper towel dispensers] [[User:BradleyLarson|BradleyLarson]] ([[User talk:BradleyLarson|talk]]) 07:42, 13 December 2018 (PST) | ||
| No commercial equivalent, but it makes the $60 dispenser usable | | No commercial equivalent, but it makes the $60 dispenser usable | ||
|Print time of about 1.5 hours at 40 mm/s and cost of $0.62 based on $20/kg and 31g of filament) | | Print time of about 1.5 hours at 40 mm/s and cost of $0.62 based on $20/kg and 31g of filament) | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image: Image cctv.jpeg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-raspberry-pi-cctv-81241 Smart CCTV] | | [https://www.myminifactory.com/object/3d-print-raspberry-pi-cctv-81241 Smart CCTV] | ||
|[https://www.bestbuy.com/site/nest-nest-cam-iq-indoor-full-hd-wi-fi-home-security-camera-white/5901306.p?skuId=5901306 NestCam IQ $300] | | [https://www.bestbuy.com/site/nest-nest-cam-iq-indoor-full-hd-wi-fi-home-security-camera-white/5901306.p?skuId=5901306 NestCam IQ $300] | ||
|Savings of $250. Can be programmed to work with Alexa, google home and apple Homekit | | Savings of $250. Can be programmed to work with Alexa, google home and apple Homekit | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image: Ski wax scrapers.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-ski-wax-scarapers-81243 Ski Wax Scraper Set] | | [https://www.myminifactory.com/object/3d-print-ski-wax-scarapers-81243 Ski Wax Scraper Set] | ||
|[https://www.tognar.com/swix-pencil-groove-scraper-t0088/ Swix Pencil Groove Scraper ($5.95)], Skinny Skis Klister/Kick Wax Scraper ($10), [https://www.tognar.com/swix-pencil-groove-scraper-t0088/ General Wax Scraper ($5.95)] | | [https://www.tognar.com/swix-pencil-groove-scraper-t0088/ Swix Pencil Groove Scraper ($5.95)], Skinny Skis Klister/Kick Wax Scraper ($10), [https://www.tognar.com/swix-pencil-groove-scraper-t0088/ General Wax Scraper ($5.95)] | ||
|Groove Scraper (7g), Klister scraper (19g), General Scraper (20g) -> 46g total * $15/1000g = $0.69 -> $21.90 - $0.69 = $21.21 = 96.8% savings | | Groove Scraper (7g), Klister scraper (19g), General Scraper (20g) -> 46g total * $15/1000g = $0.69 -> $21.90 - $0.69 = $21.21 = 96.8% savings | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image: Block Printing Press JRJ.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-block-printing-press-81244 Block Printing Press] | | [https://www.myminifactory.com/object/3d-print-block-printing-press-81244 Block Printing Press] | ||
|[https://www.amazon.com/Speedball-4136-Block-Printing-Press/dp/B000BYVMIE/ref=pd_sbs_201_1?_encoding=UTF8&pd_rd_i=B000BYVMIE&pd_rd_r=34727121-fe89-11e8-9c91-65b0d1dd93e7&pd_rd_w=SIsAt&pd_rd_wg=OqzAz&pf_rd_p=7d5d9c3c-5e01-44ac-97fd-261afd40b865&pf_rd_r=AGRF06911689552DVXX5&psc=1&refRID=AGRF06911689552DVXX5 Manual Block Printing Press ($54+)] | | [https://www.amazon.com/Speedball-4136-Block-Printing-Press/dp/B000BYVMIE/ref=pd_sbs_201_1?_encoding=UTF8&pd_rd_i=B000BYVMIE&pd_rd_r=34727121-fe89-11e8-9c91-65b0d1dd93e7&pd_rd_w=SIsAt&pd_rd_wg=OqzAz&pf_rd_p=7d5d9c3c-5e01-44ac-97fd-261afd40b865&pf_rd_r=AGRF06911689552DVXX5&psc=1&refRID=AGRF06911689552DVXX5 Manual Block Printing Press ($54+)] | ||
|Total Print Time: ~6 hrs, Filament: .37 kg @ $7.40, Hardware: $6.00, Savings: $40.60 minimum | | Total Print Time: ~6 hrs, Filament: .37 kg @ $7.40, Hardware: $6.00, Savings: $40.60 minimum | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:3DP ESkateboard.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81246 Mostly 3DP Electric Skateboard] | | [https://www.myminifactory.com/object/3d-print-81246 Mostly 3DP Electric Skateboard] | ||
|[https://boostedboards.com/boards/boosted-mini Commercial Equivalent: Boosted Board Mini ($999)] | | [https://boostedboards.com/boards/boosted-mini Commercial Equivalent: Boosted Board Mini ($999)] | ||
|Total Print Time: ~20 hrs, Plastic Usage: Skateboard - 1200g Pellets ($2.64) Other Parts - 390g PC Filament ($9.75), Hardware: $269, Total Cost: $282.37 Savings: $716.63 or 72% | | Total Print Time: ~20 hrs, Plastic Usage: Skateboard - 1200g Pellets ($2.64) Other Parts - 390g PC Filament ($9.75), Hardware: $269, Total Cost: $282.37 Savings: $716.63 or 72% | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:PWC Speaker Mounts.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81250 PWC Speaker Mount] | | [https://www.myminifactory.com/object/3d-print-81250 PWC Speaker Mount] | ||
|[https://www.amazon.com/Sea-Doo-Marine-Kicker-Custom-Speaker/dp/B00RH41IXA Speaker Housing ($364.99 w/o speakers)] | | [https://www.amazon.com/Sea-Doo-Marine-Kicker-Custom-Speaker/dp/B00RH41IXA Speaker Housing ($364.99 w/o speakers)] total with speakers/wiring/electronics ~$500+ | ||
|Cost savings of $420+ | | Cost savings of $420+ | ||
*3D Printed Mount itself costs ~$3, entire setup with two bluetooth speakers ~$80, more versatile, no holes in hull | |||
*Commercial equivalent mount ~$365, total with speakers/wiring/electronics ~$500+, holes drilled in hull | * 3D Printed Mount itself costs ~$3, entire setup with two bluetooth speakers ~$80, more versatile, no holes in hull | ||
* Commercial equivalent mount ~$365, total with speakers/wiring/electronics ~$500+, holes drilled in hull | |||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Encoder.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81251 Encoder shaft and base] | | [https://www.myminifactory.com/object/3d-print-81251 Encoder shaft and base] | ||
|No commercial equivalent available but cost savings upto $55-65 | | No commercial equivalent available but cost savings upto $55-65 | ||
|The total cost including material, machine, tool and manual labor cost goes around 60-70 dollars. Cost required to print both parts is about 3-4$ | | The total cost including material, machine, tool and manual labor cost goes around 60-70 dollars. Cost required to print both parts is about 3-4$ | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:LetterK.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-81253 Wood Printed Letter with Lights] | | [https://www.myminifactory.com/object/3d-print-81253 Wood Printed Letter with Lights] | ||
| Range [https://www.etsy.com/listing/526179631/rustic-barn-style-giant-wooden-led-light?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=wood+letter+light&ref=sr_gallery-1-2&organic_search_click=1&bes=1, $40] - [https://www.etsy.com/listing/385562038/16-inches-light-letter-iluminated-letter?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=wood+letter+light&ref=sr_gallery-1-18&organic_search_click=1, $120] | | Range [https://www.etsy.com/listing/526179631/rustic-barn-style-giant-wooden-led-light?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=wood+letter+light&ref=sr_gallery-1-2&organic_search_click=1&bes=1, $40] - [https://www.etsy.com/listing/385562038/16-inches-light-letter-iluminated-letter?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=wood+letter+light&ref=sr_gallery-1-18&organic_search_click=1, $120] | ||
| Total savings range: $32.12-$112.12 | | Total savings range: $32.12-$112.12 | ||
Line 674: | Line 690: | ||
|- | |- | ||
|[[File:Sand Ram.JPG|200px]] | | [[File:Sand Ram.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81255 Green Sand Ram] | | [https://www.myminifactory.com/object/3d-print-81255 Green Sand Ram] | ||
|Could not find commercial equivalent that was not automatic but it does provide a cheap solution for small operations | | Could not find commercial equivalent that was not automatic but it does provide a cheap solution for small operations | ||
|Print time of 5.5 hours and 175g material ($3.50) | | Print time of 5.5 hours and 175g material ($3.50) | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Planar Board.jpeg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-planar-board-81281 Planar Board] | | [https://www.myminifactory.com/object/3d-print-planar-board-81281 Planar Board] | ||
|[https://www.fishusa.com/product/Church-Tackle-TX44-Super-Planer-Board], $38.00 | | [https://www.fishusa.com/product/Church-Tackle-TX44-Super-Planer-Board], $38.00 | ||
|Cost to Print: $1.85 | | Cost to Print: $1.85 | ||
Savings: $36.15 (95%) | Savings: $36.15 (95%) | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:wago tool.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-terminal-tool-81289 Terminal Tool] | | [https://www.myminifactory.com/object/3d-print-terminal-tool-81289 Terminal Tool] | ||
| [https://automationdistribution.com/wago-2009-309-operating-tool-rohs-compliant-yes-pack-of-1/?gclid=EAIaIQobChMIrv3rkIad3wIVBhxpCh0G2AKnEAQYECABEgICpfD_BwE ], $22.00 | | [https://automationdistribution.com/wago-2009-309-operating-tool-rohs-compliant-yes-pack-of-1/?gclid=EAIaIQobChMIrv3rkIad3wIVBhxpCh0G2AKnEAQYECABEgICpfD_BwE], $22.00 | ||
| cost savings $21.36 (98%) | | cost savings $21.36 (98%) | ||
|- | |- | ||
|- | |- | ||
|[[File:IMG 3887.jpg|200px]] | | [[File:IMG 3887.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81266] | | [https://www.myminifactory.com/object/3d-print-81266] | ||
|Commercial Equivalent $350 | | Commercial Equivalent $350 | ||
|Cost to Print with Bearings and Screws ~$25. Savings of $325. Future Plan to use two position plungers and 3 piece design rather then 3. | | Cost to Print with Bearings and Screws ~$25. Savings of $325. Future Plan to use two position plungers and 3 piece design rather then 3. | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Hexgrid Example.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-hexagonal-tabletop-rpg-terrain-81270 Tabletop RPG Terrain] | | [https://www.myminifactory.com/object/3d-print-hexagonal-tabletop-rpg-terrain-81270 Tabletop RPG Terrain] | ||
|[https://www.allthingsheroscape.com/collections/heroscape-terrain Original Product no longer in manufacture, resale market is around $10 - $25] | | [https://www.allthingsheroscape.com/collections/heroscape-terrain Original Product no longer in manufacture, resale market is around $10 - $25] | ||
| Savings is ~9$ per 6Hex | | Savings is ~9$ per 6Hex | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:BGPod.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-81259 Boost Gauge Pod] | | [https://www.myminifactory.com/object/3d-print-81259 Boost Gauge Pod] | ||
| [https://www.ecstuning.com/b-ecs-parts/ecs-vent-pod-boost-gauge-kit/001576ecs01kt/?gclid=EAIaIQobChMIkrr97t6c3wIVCz1pCh1E1AhDEAQYASABEgJlcPD_BwE Similar Product Currently on Market], $155 | | [https://www.ecstuning.com/b-ecs-parts/ecs-vent-pod-boost-gauge-kit/001576ecs01kt/?gclid=EAIaIQobChMIkrr97t6c3wIVCz1pCh1E1AhDEAQYASABEgJlcPD_BwE Similar Product Currently on Market], $155 | ||
| Cost to print: $1.25, Cost of Double sided Tape Used: $0.08, Cost savings: upwards of 80% | | Cost to print: $1.25, Cost of Double sided Tape Used: $0.08, Cost savings: upwards of 80% | ||
Line 717: | Line 733: | ||
|- | |- | ||
| [[ | | [[Image:Pit Viper Case.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-81242 Pit Viper Sunglasses Case] | | [https://www.myminifactory.com/object/3d-print-81242 Pit Viper Sunglasses Case] | ||
| [https://www.google.com/search?q=hard+sunglasses+case&source=lnms&tbm=shop&sa=X&ved=0ahUKEwj08LSp-JzfAhXG54MKHTFbAXIQ_AUIDigB&biw=1707&bih=804&dpr=1.13 Similar Products], $8-20 | | [https://www.google.com/search?q=hard+sunglasses+case&source=lnms&tbm=shop&sa=X&ved=0ahUKEwj08LSp-JzfAhXG54MKHTFbAXIQ_AUIDigB&biw=1707&bih=804&dpr=1.13 Similar Products], $8-20 | ||
| Cost to print: $3.22, Cost savings: ~ $5+ (60%) | | Cost to print: $3.22, Cost savings: ~ $5+ (60%) | ||
Line 724: | Line 740: | ||
|- | |- | ||
| [[ | | [[Image:BroomballHolder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-broomball-broom-holder-81304 Broomball Broom Holder] | | [https://www.myminifactory.com/object/3d-print-broomball-broom-holder-81304 Broomball Broom Holder] | ||
| [https://www.academy.com/shop/pdp/easton-fence-rack#repChildCatid=37763?campID=688880538&groupID=37171337444&device=c&productID=017933144&gclid=EAIaIQobChMIo4fpr4Cd3wIVGHZeCh3WFgT7EAQYAyABEgI9YvD_BwE], closest market approximation: 14$ | | [https://www.academy.com/shop/pdp/easton-fence-rack#repChildCatid=37763?campID=688880538&groupID=37171337444&device=c&productID=017933144&gclid=EAIaIQobChMIo4fpr4Cd3wIVGHZeCh3WFgT7EAQYAyABEgI9YvD_BwE], closest market approximation: 14$ | ||
| Cost to print: $1.98, Cost savings: ~ $12+ (85%) | | Cost to print: $1.98, Cost savings: ~ $12+ (85%) | ||
Line 731: | Line 747: | ||
|- | |- | ||
|[[ | | [[Image:Joystick Extension.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-wheelchair-joystick-extension-81292]Wheel Chair Joystick Extension | | [https://www.myminifactory.com/object/3d-print-wheelchair-joystick-extension-81292]Wheel Chair Joystick Extension | ||
|[https://www.etsy.com/listing/650486761/shorty-wheelchair-joystick?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_c-electronics_and_accessories-car_parts_and_accessories-car_accessories&utm_custom1=cb709558-3689-422a-a16e-520c9e3d2c11&utm_content=go_304502075_22746067595_78727297715_pla-106552232915_c__650486761&gclid=EAIaIQobChMIreLeioqd3wIVC9vACh1lhQ_MEAkYCSABEgJRLPD_BwE] Commercially Available, $20 | | [https://www.etsy.com/listing/650486761/shorty-wheelchair-joystick?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_c-electronics_and_accessories-car_parts_and_accessories-car_accessories&utm_custom1=cb709558-3689-422a-a16e-520c9e3d2c11&utm_content=go_304502075_22746067595_78727297715_pla-106552232915_c__650486761&gclid=EAIaIQobChMIreLeioqd3wIVC9vACh1lhQ_MEAkYCSABEgJRLPD_BwE] Commercially Available, $20 | ||
|Cost to print: $0.21 | | Cost to print: $0.21 | ||
(99% Savings) | (99% Savings) | ||
|- | |- | ||
Line 740: | Line 756: | ||
|- | |- | ||
| [[Image:Wireless Watch Charger.jpg|200px]] | | [[Image:Wireless Watch Charger.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-wireless-charger-for-samsung-gear-81286 Wireless Watch Charger] | | [https://www.myminifactory.com/object/3d-print-wireless-charger-for-samsung-gear-81286 Wireless Watch Charger] | ||
|[], closest market approximation: $30 | | [], closest market approximation: $30 | ||
| Cost to print: $1.30, components: $12, Cost Savings: ~ $17 | | Cost to print: $1.30, components: $12, Cost Savings: ~ $17 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:5777 apetsiuk big.jpg|200px]] | ||
| Customizer: [https://www.thingiverse.com/thing:3280531] | | Customizer: [https://www.thingiverse.com/thing:3280531] MyMiniFactory: [https://www.myminifactory.com/object/3d-print-wrist-support-81299] | ||
| Customizable Wrist Support. Closest market approximation: $6 | | Customizable Wrist Support. Closest market approximation: $6 | ||
| Cost to print: $2.00, Cost savings: ~ $4.00+ (300 %) | | Cost to print: $2.00, Cost savings: ~ $4.00+ (300 %) | ||
Line 753: | Line 769: | ||
|- | |- | ||
| [[ | | [[Image:ball thrower.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-tennis-ball-thrower-for-dogs-81249 Tennis Ball Thrower] | | [https://www.myminifactory.com/object/3d-print-tennis-ball-thrower-for-dogs-81249 Tennis Ball Thrower] | ||
| Commercial cost $10 | | Commercial cost $10 | ||
| Cost to print: $4.50, Cost savings: | | Cost to print: $4.50, Cost savings: $5 (50%) | ||
|- | |- | ||
|- | |- | ||
| [[Image:BigMoney.jpg|200px]] | | [[Image:BigMoney.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-81287 Buchner funnel] | | [https://www.myminifactory.com/object/3d-print-81287 Buchner funnel] | ||
| Closest market approximation: $40 | | Closest market approximation: $40 [https://www.coleparmer.com/p/plastic-buchner-funnels/3998] | ||
| Cost to print: $1.50, Cost Savings: ~ $35-40 | | Cost to print: $1.50, Cost Savings: ~ $35-40 | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Clamp.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-weightlifting-clamp-still-in-progress-81291 Weight Lifting Clamp] | | [https://www.myminifactory.com/object/3d-print-weightlifting-clamp-still-in-progress-81291 Weight Lifting Clamp] | ||
|[https://www.roguefitness.com/rogue-hg-axle-collars?prod_id=20413&gclid=EAIaIQobChMI5cba5Ied3wIVQrnACh1xLg2fEAkYBSABEgI3rvD_BwE, $15/clamp] | | [https://www.roguefitness.com/rogue-hg-axle-collars?prod_id=20413&gclid=EAIaIQobChMI5cba5Ied3wIVQrnACh1xLg2fEAkYBSABEgI3rvD_BwE, $15/clamp] | ||
| Cost to print: $2.08, Cost savings: ~14/clamp (There are many in a weight room) | | Cost to print: $2.08, Cost savings: ~14/clamp (There are many in a weight room) | ||
| 104 g of material. 4 hours print time. | | 104 g of material. 4 hours print time. | ||
Line 776: | Line 791: | ||
|- | |- | ||
| [[ | | [[Image:Fishing Tool Holder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-fishing-boat-tool-holder-81282 Fishing Boat Tool Holder] | | [https://www.myminifactory.com/object/3d-print-fishing-boat-tool-holder-81282 Fishing Boat Tool Holder] | ||
| [https://www.amazon.com/Brocraft-Holder-Tracker-Versatrack-System/dp/B01FYSPOKS/ref=sr_1_6?ie=UTF8&qid=1544712806&sr=8-6&keywords=fishing+tool+holder+for+boat], $31 | | [https://www.amazon.com/Brocraft-Holder-Tracker-Versatrack-System/dp/B01FYSPOKS/ref=sr_1_6?ie=UTF8&qid=1544712806&sr=8-6&keywords=fishing+tool+holder+for+boat], $31 | ||
| Cost to Print: $1.30, Total Savings: $29.70 (~97%) | | Cost to Print: $1.30, Total Savings: $29.70 (~97%) | ||
Line 783: | Line 798: | ||
|- | |- | ||
|[[Image:AdaptableOtoscope.jpg|200px]] | | [[Image:AdaptableOtoscope.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-smart-phone-adaptive-otoscope-81285 Smart Phone Adaptive Otoscope with lens] | | [https://www.myminifactory.com/object/3d-print-smart-phone-adaptive-otoscope-81285 Smart Phone Adaptive Otoscope with lens] | ||
| At home otoscope: $18 | | At home otoscope: $18 | ||
Cell Phone adaptive otoscope $40 - $300 | Cell Phone adaptive otoscope $40 - $300 | ||
| Printed pieces cost: $0.18, | | Printed pieces cost: $0.18, Disposable camera (lens): $9, Cost savings: ~$30-290 | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Peg-Measure.JPG|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-peg-measure-81288 Peg Measure] | | [https://www.myminifactory.com/object/3d-print-peg-measure-81288 Peg Measure] | ||
| Commercial Equivalents available starting from $15-20 | | Commercial Equivalents available starting from $15-20 | ||
| This product cost ~$0.62, can be made customized without much of cost addition | | This product cost ~$0.62, can be made customized without much of cost addition | ||
% Cost saving = upto 97% | |||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Yo Buddha pen stand.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-yoda-buddha-pen-stand-81297 Yo Buddha Pen stand] | | [https://www.myminifactory.com/object/3d-print-yoda-buddha-pen-stand-81297 Yo Buddha Pen stand] | ||
| Yo-Buddha-pen-stand | | Yo-Buddha-pen-stand Commercial a priceless gift | ||
| This product cost ~$1.93, can be made customized without much of cost addition | | This product cost ~$1.93, can be made customized without much of cost addition | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:20181213 003428.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-bike-lock-holder-storage-container-81298 Bike Lock Holder with container] | | [https://www.myminifactory.com/object/3d-print-bike-lock-holder-storage-container-81298 Bike Lock Holder with container] [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:20, 13 December 2018 (PST) | ||
| Commercial equivalent costs ~$20 [https://www.amazon.com/U-LOCK-HOLDER-Holder-Mount-Huldit/dp/B01MZ4GMUW/ref=sr_1_3?ie=UTF8&qid=1544715222&sr=8-3&keywords=bike+lock+holder On Amazon] | | Commercial equivalent costs ~$20 [https://www.amazon.com/U-LOCK-HOLDER-Holder-Mount-Huldit/dp/B01MZ4GMUW/ref=sr_1_3?ie=UTF8&qid=1544715222&sr=8-3&keywords=bike+lock+holder On Amazon] | ||
| ''cost $0.50-$4 | | ''cost $0.50-$4'' | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Snow stop.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-snow-stop-for-metal-roofs-81301 Snow Stop for metal roof] | | [https://www.myminifactory.com/object/3d-print-snow-stop-for-metal-roofs-81301 Snow Stop for metal roof] | ||
| [https://snoblox-snojax.com/ $2-5] | | [https://snoblox-snojax.com/ $2-5] | ||
| Cost to print: $1.20, Cost savings: ~ $0.80 to $3.80 per part (100 parts or more needed) | | Cost to print: $1.20, Cost savings: ~ $0.80 to $3.80 per part (100 parts or more needed) | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Hook Holder.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-hook-extension-81290 Hook extention] | | [https://www.myminifactory.com/object/3d-print-hook-extension-81290 Hook extention] | ||
| Commercial equivalent ~ No item exactly like it but around $10-$15 is a good estimate | | Commercial equivalent ~ No item exactly like it but around $10-$15 is a good estimate | ||
| This product cost ~$1.11 | | This product cost ~$1.11 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:lloxner EQ.jpg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-dj-knobs-and-faders-81300 DJ Knobs and Faders] | | [https://www.myminifactory.com/object/3d-print-dj-knobs-and-faders-81300 DJ Knobs and Faders] By: [[User:lloxner|Levi Oxner]] | ||
| [https://store.djtechtools.com/products/chroma-caps-knobs-and-faders Chroma Caps], $1.50 per | | [https://store.djtechtools.com/products/chroma-caps-knobs-and-faders Chroma Caps], $1.50 per | ||
| ''Saved about $1.48 per knob (Up to ~$20) | | ''Saved about $1.48 per knob (Up to ~$20)'' | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Charging dock for iphone watch and pods.jpeg|200px]] | ||
| [https://www.myminifactory.com/object/3d-print-81317 Charging dock for iPhone, apple watch and airpods] | | [https://www.myminifactory.com/object/3d-print-81317 Charging dock for iPhone, apple watch and airpods] by [[User:Sasank Potluri|Sasank Potluri]] ([[User talk:Sasank Potluri|talk]]) | ||
| [https://www.amazon.com/OLEBR-Charging-AirPods-iPhone-iPad-Space/dp/B078MXCXJ5/ref=sr_1_29?s=wireless&ie=UTF8&qid=1544726433&sr=1-29&keywords=iphone+stand $40.99] | | [https://www.amazon.com/OLEBR-Charging-AirPods-iPhone-iPad-Space/dp/B078MXCXJ5/ref=sr_1_29?s=wireless&ie=UTF8&qid=1544726433&sr=1-29&keywords=iphone+stand $40.99] | ||
to | to [https://www.amazon.com/Comecall-Wireless-Charger-Airpods-Desktop/dp/B07K4DBZ5D/ref=sr_1_6?ie=UTF8&qid=1544726399&sr=8-6&keywords=apple+phone%2C+watch%2Cairpods+stand $110.99] | ||
| costed me $3.68 to print | | costed me $3.68 to print ; saved - $38 to $108 (91% to 96.68%) | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Ball pitcher.jpg|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81326 Ball pitcher for low weight baseball ] By [[User:Athachir|Ajit thachireth]] ([[User talk:Athachir|talk]]) | | [https://www.myminifactory.com/object/3d-print-81326 Ball pitcher for low weight baseball] By [[User:Athachir|Ajit thachireth]] ([[User talk:Athachir|talk]]) | ||
|[https://www.amazon.com/gp/product/B000VZ2Q5G/ref=s9_acsd_top_hd_bw_bEFZd_c_x_3_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-3&pf_rd_r=113SZQS8ZH5M1GT40AQC&pf_rd_r=113SZQS8ZH5M1GT40AQC&pf_rd_t=101&pf_rd_p=5075dd8a-53db-54f3-a46b-1ce6ceb66e53&pf_rd_p=5075dd8a-53db-54f3-a46b-1ce6ceb66e53&pf_rd_i=3396461 40 $ to 150$] | | [https://www.amazon.com/gp/product/B000VZ2Q5G/ref=s9_acsd_top_hd_bw_bEFZd_c_x_3_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-3&pf_rd_r=113SZQS8ZH5M1GT40AQC&pf_rd_r=113SZQS8ZH5M1GT40AQC&pf_rd_t=101&pf_rd_p=5075dd8a-53db-54f3-a46b-1ce6ceb66e53&pf_rd_p=5075dd8a-53db-54f3-a46b-1ce6ceb66e53&pf_rd_i=3396461 40 $ to 150$] | ||
|costed me 4$ saved 30 to 40$ | | costed me 4$ saved 30 to 40$ | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:Chess Board.JPG|200px]] | ||
|[https://www.myminifactory.com/object/3d-print-81363 Chess Board Base] | | [https://www.myminifactory.com/object/3d-print-81363 Chess Board Base] | ||
| [https://www.google.com/shopping/product/322218321211979367?q=coolest+chess+boards&biw=1366&bih=577&dpr=1&prds=paur:ClkAsKraX0GzkHMDdQ8TudtBz4F6z5lBZ4fQBQJWlZZQIQFgtgzRe4nNKNqoP3nYl6cc7ZXijLdeNq_5oAVSmhJM9WMj-wxbIZwrr6KbStgUuXV09tw7nj9ccxIZAFPVH73t71mAFwC_8x_OlxdzDP9743YhcA&sa=X&ved=0ahUKEwjJ_uj_05_fAhXGoYMKHWYfCCgQ8gIIrQc Commercial Equivalent] | | [https://www.google.com/shopping/product/322218321211979367?q=coolest+chess+boards&biw=1366&bih=577&dpr=1&prds=paur:ClkAsKraX0GzkHMDdQ8TudtBz4F6z5lBZ4fQBQJWlZZQIQFgtgzRe4nNKNqoP3nYl6cc7ZXijLdeNq_5oAVSmhJM9WMj-wxbIZwrr6KbStgUuXV09tw7nj9ccxIZAFPVH73t71mAFwC_8x_OlxdzDP9743YhcA&sa=X&ved=0ahUKEwjJ_uj_05_fAhXGoYMKHWYfCCgQ8gIIrQc Commercial Equivalent] | ||
| Cost savings of over $140 | | Cost savings of over $140 | ||
Line 857: | Line 871: | ||
|- | |- | ||
|[[ | | [[Image:Peg Measure.JPG|200px|link=Special:FilePath/Peg_Measure.JPG]] | ||
| [https://www.myminifactory.com/object/3d-print-peg-measure-81288] | | [https://www.myminifactory.com/object/3d-print-peg-measure-81288] | ||
| Commercial Equivalents available starting from $15-20 | | Commercial Equivalents available starting from $15-20 | ||
Line 865: | Line 879: | ||
|- | |- | ||
|[[Image: | | [[Image:DSLR Tripod.jpg|200px]] | ||
|[https://www.youmagine.com/designs/dslr-tripod DSLR Camera Tripod!] | | [https://www.youmagine.com/designs/dslr-tripod DSLR Camera Tripod!] | ||
|Commercial Tripod $50-$100 | | Commercial Tripod $50-$100 | ||
|3D Printed Tripod $2 of plastic and $3 of Bolts and nuts. Total cost is 5$ Cost saving up to 95% | | 3D Printed Tripod $2 of plastic and $3 of Bolts and nuts. Total cost is 5$ Cost saving up to 95% | ||
| | | | ||
|} | |} | ||
==2018== | == 2018 == | ||
== 2016 == | |||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! | ! Digital Photo | ||
! | ! Free Design/Link to YouMagine | ||
! | ! Commercial equivalent link/Cost US$ | ||
! | ! Approximate Savings in US$ | ||
|- | |- | ||
| [[ | | [[Image:laptopstand.jpg|200px]] | ||
| [http://libre3d.com/category/648/Furniture/listings/753/Adjustable-Laptop-Stand.html Adjustable laptop stand] | | | ||
| [ | [http://libre3d.com/category/648/Furniture/listings/753/Adjustable-Laptop-Stand.html Adjustable laptop stand] | ||
| [https://www.newegg.com/Product/Product.aspx?Item=9SIA4UB1XT1260&nm_mc=KNC-GoogleMKP&cm_mmc=KNC-GoogleMKP-_-pla-_-Office+Furniture-_-9SIA4UB1XT1260], $80 | |||
| $50 | | $50 | ||
|- | |- | ||
|- | |- | ||
|[[ | | [[Image:IMG 0581.JPG|200px]] | ||
|[https://www.youmagine.com/designs/trumpet-mute-stand Trumpet Mute Stand] | | [https://www.youmagine.com/designs/trumpet-mute-stand Trumpet Mute Stand] | ||
|[https://www.amazon.com/Stands-15910-000-55-Mute-Holder-Black/dp/B00WBWNC82/ref=sr_1_4?ie=UTF8&qid=1481208465&sr=8-4&keywords=trumpet+mute+stand],$14-$29 | | [https://www.amazon.com/Stands-15910-000-55-Mute-Holder-Black/dp/B00WBWNC82/ref=sr_1_4?ie=UTF8&qid=1481208465&sr=8-4&keywords=trumpet+mute+stand],$14-$29 | ||
|Cost about $0.60 in PLA material to make, cost savings between $13 and $28 depending on the product available in retail | | Cost about $0.60 in PLA material to make, cost savings between $13 and $28 depending on the product available in retail | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:tableth.jpg|200px]] | ||
| [https://www.youmagine.com/designs/flexible-tablet-hanger | | [https://www.youmagine.com/designs/flexible-tablet-hanger Flexible Tablet Hanger by siranee] [[User:Snuchitp|Snuchitp]] ([[User talk:Snuchitp|talk]]) 12:41, 7 December 2016 (PST) | ||
| [https://www.amazon.com/HighView-anywhere-headrest-airplane-accessory/dp/B00NNTO11Y/ref=sr_1_2?ie=UTF8&qid=1479972981&sr=8-2&keywords=tablet+hanger] or [https://i1207.photobucket.com/albums/bb461/ynilsiam/Screen%20Shot%202016-11-24%20at%202.36.45%20AM_zpspg8m7dwf.png], $24.99 | | [https://www.amazon.com/HighView-anywhere-headrest-airplane-accessory/dp/B00NNTO11Y/ref=sr_1_2?ie=UTF8&qid=1479972981&sr=8-2&keywords=tablet+hanger] or [https://i1207.photobucket.com/albums/bb461/ynilsiam/Screen%20Shot%202016-11-24%20at%202.36.45%20AM_zpspg8m7dwf.png], $24.99 | ||
| $20 | | $20 | ||
Line 903: | Line 919: | ||
|- | |- | ||
| [[ | | [[Image:Wedge close up.jpg|200px]] | ||
| [https://www.youmagine.com/designs/weightlifting-wedge | | [https://www.youmagine.com/designs/weightlifting-wedge Weightlifting Wedge] By: [[User:Amcmichael|Andrew McMichael]] | ||
| [http://www.roguefitness.com/the-dead-wedge?gclid=CKDb3tKLndACFZGIaQodPgQGdg ], $17.95 | | [http://www.roguefitness.com/the-dead-wedge?gclid=CKDb3tKLndACFZGIaQodPgQGdg], $17.95 | ||
| $16 | | $16 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:final.jpg|200px]] | ||
| [https://www.youmagine.com/designs/multi-tier-jewelry-holder#information | | [https://www.youmagine.com/designs/multi-tier-jewelry-holder#information Multi-Tiered Jewelry Holder] By: [[User:Krcipriano|Kathrine Cipriano]] | ||
| [https://www.anthropologie.com/shop/tasseled-jewelry-stand2?category=jewelry-boxes-stands&color=027], $98 | | [https://www.anthropologie.com/shop/tasseled-jewelry-stand2?category=jewelry-boxes-stands&color=027], $98 | ||
| $95.16 | | $95.16 | ||
Line 917: | Line 933: | ||
|- | |- | ||
| [[ | | [[Image:Headphone Holder.jpg|200px|link=Special:FilePath/Headphone_Holder.jpg]] | ||
| [https://www.youmagine.com/designs/wall-mounted-headphone-holder | | [https://www.youmagine.com/designs/wall-mounted-headphone-holder Wall Mounted Heaphone Holder] By: [[User:Cdely|Christopher Ely]] | ||
| [https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2], $10 | | [https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2], $10 | ||
| $9 | | $9 | ||
Line 924: | Line 940: | ||
|- | |- | ||
| [[ | | [[Image:Headphone clip.jpg|200px]] | ||
| [https://www.youmagine.com/designs/ear-clamp-for-headphones | | [https://www.youmagine.com/designs/ear-clamp-for-headphones Earbud Headphone Clip] By: [[User:Dsully567|Daniel Sullivan]] | ||
| [https://www.thegrommet.com/gobudi-earbudi-flex-headphone-clips?utm_source=googlepla&utm_medium=cpc&utm_campaign=shoppingfeed&utm_content=2107-S-101&gclid=CjwKEAiAg5_CBRDo4o6e4o3NtG0SJAB-IatY1ij4MTUjnN_7dw_mJ0VFdaumcjHEXX4-F25NamF7IhoCmlbw_wcB], $12 | | [https://www.thegrommet.com/gobudi-earbudi-flex-headphone-clips?utm_source=googlepla&utm_medium=cpc&utm_campaign=shoppingfeed&utm_content=2107-S-101&gclid=CjwKEAiAg5_CBRDo4o6e4o3NtG0SJAB-IatY1ij4MTUjnN_7dw_mJ0VFdaumcjHEXX4-F25NamF7IhoCmlbw_wcB], $12 | ||
| $11.90 == %98 | | $11.90 == %98 | ||
Line 931: | Line 947: | ||
|- | |- | ||
| [[ | | [[Image:Fourtharrowmount.JPG|200px]] | ||
| [https://www.youmagine.com/designs/fourth-arrow-hunting-camera-mount | | [https://www.youmagine.com/designs/fourth-arrow-hunting-camera-mount Fourth Arrow Camera Mount] By: [[User:remichae|Ross Michaels]] | ||
| [https://fourtharrowcameraarms.com/shop/stiff-arm-pro-base-only/ Commercial Camera Mount], $39 | | [https://fourtharrowcameraarms.com/shop/stiff-arm-pro-base-only/ Commercial Camera Mount], $39 | ||
! Savings of $35.41 (90.7%) Printing Cost: $1.58 (filament) + 2.01 (bolts & nuts) = $3.59 | |||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Gascapgear.jpg|200px]] | ||
| [https://www.youmagine.com/designs/gas-cap-wrench | | [https://www.youmagine.com/designs/gas-cap-wrench Gas Cap Wrench] By: [[User:JLaureto|John Laureto]] | ||
| [http://www.lifesolutionsplus.com/gas-cap-tool-p-502.html Gas Cap Tool], $15.95 | | [http://web.archive.org/web/20160812062636/http://www.lifesolutionsplus.com/gas-cap-tool-p-502.html Gas Cap Tool], $15.95 | ||
| Printing Cost: $1.03 (Assuming Hatchbox PLA @ $22.99/kg) '''Savings:''' $14.92 | | Printing Cost: $1.03 (Assuming Hatchbox PLA @ $22.99/kg) '''Savings:''' $14.92 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:closeuphockey.jpg|200px]] | ||
| [https://www.youmagine.com/designs/hockey-stick-holder Hockey Stick Holder] | | [https://www.youmagine.com/designs/hockey-stick-holder Hockey Stick Holder] By: [[User:dmswanso|David Swanson]] | ||
| [http://rackitupcanada.com/product/ice-hockey-stick-storage-rack/ Hockey Stick Rack], $30.00 | | | ||
[http://rackitupcanada.com/product/ice-hockey-stick-storage-rack/ Hockey Stick Rack], $30.00 | |||
| $28.53 | | $28.53 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:C920 Lens Holder.jpg|200px]] | ||
| [https://www.youmagine.com/designs/logitech-c920-lens-holder C920 Lens Holder] | | [https://www.youmagine.com/designs/logitech-c920-lens-holder C920 Lens Holder] By: [[User:Nakolean|Nicholas Kolean]] | ||
| [https://www.thorlabs.com/thorproduct.cfm?partnumber=LM2-B Lens Mount], $29.40 | | [https://www.thorlabs.com/thorproduct.cfm?partnumber=LM2-B Lens Mount], $29.40 | ||
| $29.36 | | $29.36 | ||
Line 959: | Line 976: | ||
|- | |- | ||
| [[ | | [[Image:Glass SLide Dryer.jpg|200px]] | ||
| [https://www.youmagine.com/designs/glass-slide-dryer] | | [https://www.youmagine.com/designs/glass-slide-dryer] By: [[User:Ldstetsk|Logan Stetsko]] and [[User:yanibeeker|Yani Beeker]] | ||
| [https://www.emsdiasum.com/microscopy/products/histology/heaters.aspx], $800 | | [https://www.emsdiasum.com/microscopy/products/histology/heaters.aspx], $800 | ||
| $775 | | $775 | ||
Line 966: | Line 983: | ||
|- | |- | ||
| [[ | | [[Image:IMG 1561.JPG|200px]] | ||
| [https://www.youmagine.com/designs/external-hard-drive-hanger External Hard Drive Hanger] | | [https://www.youmagine.com/designs/external-hard-drive-hanger External Hard Drive Hanger] By: [[User:adhought|Andrew Houghtaling]] | ||
| [http://www.yankodesign.com/2008/10/03/hanging-hard-drives/ Hanging Hard Drives], Price Not available, [https://www.amazon.com/VELCRO-Brand-Industrial-Strength-Black/dp/B00006IC2T Velcro Strips], $8.80 | | [http://www.yankodesign.com/2008/10/03/hanging-hard-drives/ Hanging Hard Drives], Price Not available, [https://www.amazon.com/VELCRO-Brand-Industrial-Strength-Black/dp/B00006IC2T Velcro Strips], $8.80 | ||
| $8.30 (compared to velcro mounting method) | | $8.30 (compared to velcro mounting method) | ||
Line 973: | Line 990: | ||
|- | |- | ||
| [[ | | [[Image:Switch enclosure.jpeg|200px]] | ||
| [https://www.youmagine.com/designs/switch-enclosure Switch Enclosure] | | [https://www.youmagine.com/designs/switch-enclosure Switch Enclosure] By: [[User:njlanter|Nick Lanter]] | ||
| [http://www.onlinemetals.com/merchant.cfm?pid=1246&step=4&id=76&gclid=CPfx_I2t29ACFRiewAodlHkFlw], $50.70 | | [http://www.onlinemetals.com/merchant.cfm?pid=1246&step=4&id=76&gclid=CPfx_I2t29ACFRiewAodlHkFlw], $50.70 | ||
| $49.44 | | $49.44 | ||
Line 980: | Line 997: | ||
|- | |- | ||
| [[ | | [[Image:Push up grips.JPG|200px]] | ||
| [https://www.youmagine.com/designs/push-up-grip Push up grips] | | [https://www.youmagine.com/designs/push-up-grip Push up grips] By: [[User:Shan Zhong|Shan Zhong]] | ||
| [https://www.google.com/shopping/product/16534981812870704691?q=push+up+grips&espv=2&biw=1366&bih=643&bav=on.2,or.&bvm=bv.139782543,d.cGw&ion=1&tch=1&ech=1&psi=St9GWLf7EseH0gLajaKwAg.1481039690604.5&sa=X&ved=0ahUKEwj89-T89t_QAhVmzVQKHUZEDiwQ8wIIuQMwDw Commercial push up grips], $20 | | [https://www.google.com/shopping/product/16534981812870704691?q=push+up+grips&espv=2&biw=1366&bih=643&bav=on.2,or.&bvm=bv.139782543,d.cGw&ion=1&tch=1&ech=1&psi=St9GWLf7EseH0gLajaKwAg.1481039690604.5&sa=X&ved=0ahUKEwj89-T89t_QAhVmzVQKHUZEDiwQ8wIIuQMwDw Commercial push up grips], $20 | ||
| The total plastic consumption is 152 grams so the total cost is just $3.24 based on the filament price which is $21.3/kg. The total cost saving is $16.76 | | The total plastic consumption is 152 grams so the total cost is just $3.24 based on the filament price which is $21.3/kg. The total cost saving is $16.76 | ||
Line 987: | Line 1,004: | ||
|- | |- | ||
| [[ | | [[Image:printedclinometer.jpg|200px]] | ||
| Clinometer [https://www.youmagine.com/designs/clinometer] | | Clinometer [https://www.youmagine.com/designs/clinometer] By: [[User:Blsavone|Ben Savonen]] | ||
| Costs range from $25 [http://www.didax.com/shop/productdetails.cfm/ItemNo/8-506/src/214/?gclid=CJGJmYWD4NACFUWewAod4A0GHQ] to well over $100 [https://www.bhphotovideo.com/bnh/controller/home?O=&sku=995215&gclid=CJTR4qmD4NACFQwIaQodvkMFfg&is=REG&ap=y&m=Y&c3api=1876%2C91438732682%2C&A=details&Q=] | | Costs range from $25 [http://www.didax.com/shop/productdetails.cfm/ItemNo/8-506/src/214/?gclid=CJGJmYWD4NACFUWewAod4A0GHQ] to well over $100 [https://www.bhphotovideo.com/bnh/controller/home?O=&sku=995215&gclid=CJTR4qmD4NACFQwIaQodvkMFfg&is=REG&ap=y&m=Y&c3api=1876%2C91438732682%2C&A=details&Q=] | ||
| Design uses 51 grams of PLA plastic. (In the photo, wood infused PLA was used, but this is not required). Assuming $23/kg this design costs $1.17 plus the cost of the M3 nut, bolt (20mm), and washer <$.10. Total cost: <$1.27. Savings of $21.73. | | Design uses 51 grams of PLA plastic. (In the photo, wood infused PLA was used, but this is not required). Assuming $23/kg this design costs $1.17 plus the cost of the M3 nut, bolt (20mm), and washer <$.10. Total cost: <$1.27. Savings of $21.73. | ||
Line 994: | Line 1,011: | ||
|- | |- | ||
| [[ | | [[Image:AR-10 ammo belt holder.jpg|200px]] | ||
| [ | | [https://www.thingiverse.com/thing:1949998 AR-10 Ammo Holder] By: [[User:Ztverran|Zachary Verran]] | ||
| Cost of similar product online: Range from $25 [http://www.midwayusa.com/product/372207/hunter-cartridge-belt-slide-rifle-ammunition-carrier-30-06-springfield-base-6-round-leather-brown] to $65 [http://www.midwayusa.com/product/975344/galco-belt-rifle-ammunition-carrier-6-round-450-470-500-nitro-express-leather-brown] | | Cost of similar product online: Range from $25 [http://www.midwayusa.com/product/372207/hunter-cartridge-belt-slide-rifle-ammunition-carrier-30-06-springfield-base-6-round-leather-brown] to $65 [http://www.midwayusa.com/product/975344/galco-belt-rifle-ammunition-carrier-6-round-450-470-500-nitro-express-leather-brown] | ||
Can be as cheap as $6 [http://www.midwayusa.com/product/922794/midwayusa-buttstock-rifle-ammunition-carrier-black] | Can be as cheap as $6 [http://www.midwayusa.com/product/922794/midwayusa-buttstock-rifle-ammunition-carrier-black] | ||
Line 1,003: | Line 1,020: | ||
|- | |- | ||
| [[ | | [[Image:Caa4777.jpg|200px]] | ||
| [https://www.youmagine.com/designs/12-gauge-underbarrel-gopro-mount Underbarrel GoPro Mount] | | [https://www.youmagine.com/designs/12-gauge-underbarrel-gopro-mount Underbarrel GoPro Mount] By: [[User:Caaukee|Cole Aukee]] | ||
| Cost of equivalent commercial product: $69 [http://www.cabelas.com/product/GoPro-reg-Sportsman-Mount/1730983.uts?productVariantId=3697486&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03789012&rid=20&gclid=CPDfgIHV4tACFRuewAodTE4MQQ&gclsrc=aw.ds GoPro Mount from Cabela's] | | Cost of equivalent commercial product: $69 [http://www.cabelas.com/product/GoPro-reg-Sportsman-Mount/1730983.uts?productVariantId=3697486&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03789012&rid=20&gclid=CPDfgIHV4tACFRuewAodTE4MQQ&gclsrc=aw.ds GoPro Mount from Cabela's] | ||
| Cost to print: 19 grams of filament at $25 per kg of filament = $0.47 + $1.04 hardware | | Cost to print: 19 grams of filament at $25 per kg of filament = $0.47 + $1.04 hardware | ||
Line 1,011: | Line 1,028: | ||
|- | |- | ||
| [[ | | [[Image:chess set 2.jpeg|200px]] | ||
| [https://www.youmagine.com/designs/abstract-3d-chess-set Abstract Style Chess Set] | | [https://www.youmagine.com/designs/abstract-3d-chess-set Abstract Style Chess Set] By: [[User:rdreyes|Ricardo Reyes]] | ||
| Cost of equivalent commercial product: $20 [https://www.walmart.com/ip/10884289?wmlspartner=wlpa&adid=22222222227000033368&wl0=&wl1=g&wl2=c&wl3=42532634672&wl4=pla-72224102914&wl5=9017731&wl6=&wl7=9017741&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=10884289&wl13=&veh=sem Commercial Chess Set ] | | Cost of equivalent commercial product: $20 [https://www.walmart.com/ip/10884289?wmlspartner=wlpa&adid=22222222227000033368&wl0=&wl1=g&wl2=c&wl3=42532634672&wl4=pla-72224102914&wl5=9017731&wl6=&wl7=9017741&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=10884289&wl13=&veh=sem Commercial Chess Set] | ||
| Cost to print: $5 worth of filament | | Cost to print: $5 worth of filament | ||
Savings up to $15 - $1,500 depending on the quality of chess set you're looking for | Savings up to $15 - $1,500 depending on the quality of chess set you're looking for | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Shotgun Shell Holder Pic.jpg|200px]] | ||
| [https://www.youmagine.com/designs/shotgun-shell-belt-holder Shotgun Shell Belt Holder] By: [[User: jcismith|John CI Smith]] | | [https://www.youmagine.com/designs/shotgun-shell-belt-holder Shotgun Shell Belt Holder] By: [[User: jcismith|John CI Smith]] | ||
| [https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Dsporting&field-keywords=shotgun+belt+clip&rh=n%3A3375251%2Ck%3Ashotgun+belt+clip] | | [https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Dsporting&field-keywords=shotgun+belt+clip&rh=n%3A3375251%2Ck%3Ashotgun+belt+clip] $20 | ||
| Savings of $19.43 | | Savings of $19.43 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Leeloadmasterstand.jpg|200px]] | ||
| [https://www.youmagine.com/designs/lee-loadmaster-and-single-die-stand Lee Loadmaster Die Stand and Accessories] | | [https://www.youmagine.com/designs/lee-loadmaster-and-single-die-stand Lee Loadmaster Die Stand and Accessories] By: [[User:JMucinski|Josh Mucinski]] | ||
| Coded in OpenSCAD.. | | Coded in OpenSCAD.. | ||
| Cost of printing: $3.91 | | Cost of printing: $3.91 | ||
Line 1,033: | Line 1,050: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Caesar Knife Holder.jpg|200px]] | ||
| [https://www.youmagine.com/designs/julius-caesar-knife-block Caesar Knife Block] By: [[User: Tjmahan|Tobias Mahan]] | | [https://www.youmagine.com/designs/julius-caesar-knife-block Caesar Knife Block] By: [[User: Tjmahan|Tobias Mahan]] | ||
| [http://craziestgadgets.com/2013/03/22/julius-caesar-knife-block-beware-the-knives-of-march/] [https://www.amazon.com/Artelegno-14-8-Piece-Natural-Lacquer/dp/B019O38FQE/ref=sr_1_2?ie=UTF8&qid=1481121744&sr=8-2&keywords=steak+knife+block] $18 | | [http://craziestgadgets.com/2013/03/22/julius-caesar-knife-block-beware-the-knives-of-march/] [https://www.amazon.com/Artelegno-14-8-Piece-Natural-Lacquer/dp/B019O38FQE/ref=sr_1_2?ie=UTF8&qid=1481121744&sr=8-2&keywords=steak+knife+block] $18 | ||
Line 1,040: | Line 1,057: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:IMG 20161207 145258922.jpg|200px]] | ||
| [https://www.youmagine.com/designs/snowboard-bindings Snowboard Bindings] By: [[User: mlfraser|Monica Fraser]] | | [https://www.youmagine.com/designs/snowboard-bindings Snowboard Bindings] By: [[User: mlfraser|Monica Fraser]] | ||
| [http://a.co/4zOMcJV Medium Snowboard Bindings] | | [http://a.co/4zOMcJV Medium Snowboard Bindings] $150 | ||
| ($11.70 per binding in printing with TPU and PLA, 23.40 for both bindings + ~$10 in nuts and bolts = $33.40 | | ($11.70 per binding in printing with TPU and PLA, 23.40 for both bindings + ~$10 in nuts and bolts = $33.40 Total savings: $116.60 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:mwcurtisBMP.jpg|200px]] | ||
| [https://www.youmagine.com/designs/toaster-handle-replacement | | [https://www.youmagine.com/designs/toaster-handle-replacement Toaster Handle Replacement by mwcurtis] | ||
| [https://www.amazon.com/Proctor-Silex-24605-4-Slice-Toaster/dp/B00065L4ZO/ref=sr_1_6?ie=UTF8&qid=1479853634&sr=8-6&keywords=proctor+silex+4+slice+toaster ], $37.43 | | [https://www.amazon.com/Proctor-Silex-24605-4-Slice-Toaster/dp/B00065L4ZO/ref=sr_1_6?ie=UTF8&qid=1479853634&sr=8-6&keywords=proctor+silex+4+slice+toaster], $37.43 | ||
| $36.81 | | $36.81 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Sword.jpg|200px]] | ||
| [https://www.youmagine.com/designs/halo-reach-energy-sword] By: [[User: amherbst|Alex Herbst]] | | [https://www.youmagine.com/designs/halo-reach-energy-sword] By: [[User: amherbst|Alex Herbst]] | ||
| [http://www.gamestop.com/collectibles/toys/halo-energy-sword-only-at-gamestop/128701] | | [http://web.archive.org/web/20170918160228/http://www.gamestop.com:80/collectibles/toys/halo-energy-sword-only-at-gamestop/128701] $50 | ||
| No savings since there isn't anything like it at the same scale | | No savings since there isn't anything like it at the same scale | ||
|- | |- | ||
|- | |||
| [[Image:Opensource Drone.JPG|200px]] | |||
|- | |||
| [[ | |||
| [https://www.youmagine.com/designs/open-source-drone] By: [[User: JakeRob|Jacob Robinson]] | | [https://www.youmagine.com/designs/open-source-drone] By: [[User: JakeRob|Jacob Robinson]] | ||
| [https://www.amazon.com/DJI-Phantom-Standard-Quadcopter-Camera/dp/B013U0F6EQ] | | [https://www.amazon.com/DJI-Phantom-Standard-Quadcopter-Camera/dp/B013U0F6EQ] $450 | ||
| Cost to print and build: Roughly $250, Cost to buy: $400+, total savings $150+ | | Cost to print and build: Roughly $250, Cost to buy: $400+, total savings $150+ | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Camera Mount.JPG|200px]] | ||
| [https://www.youmagine.com/designs/adjustable-camera-mount Adjustable Camera Mount] By: [[User: amciesla|Alexander Ciesla]] | | [https://www.youmagine.com/designs/adjustable-camera-mount Adjustable Camera Mount] By: [[User: amciesla|Alexander Ciesla]] | ||
| | | Platypod pro $99.00 | ||
| Filament Cost: $4.06 Hardware Cost: $11.32 Total Cost: $15.38 Total Savings: $83.62 | | Filament Cost: $4.06 Hardware Cost: $11.32 Total Cost: $15.38 Total Savings: $83.62 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Risch knifeSharpener 01.jpg|200px]] | ||
| [https://www.youmagine.com/designs/knife-sharpening-jig] By: [[User: jcrisch|John Risch]] | | [https://www.youmagine.com/designs/knife-sharpening-jig] By: [[User: jcrisch|John Risch]] | ||
| [https://www.walmart.com/ip/Professional-Fix-angle-Kitchen-Knife-Sharpener-System-Hand-Sharpening-with-4-Stones/51208433?wmlspartner=wlpa&selectedSellerId=1284&adid=22222222227038906776&wl0=&wl1=g&wl2=c&wl3=85471557170&wl4=pla-193524271730&wl5=9017742&wl6=&wl7=&wl8=&wl9=pla&wl10=112561964&wl11=online&wl12=51208433&wl13=&veh=sem] | | [https://www.walmart.com/ip/Professional-Fix-angle-Kitchen-Knife-Sharpener-System-Hand-Sharpening-with-4-Stones/51208433?wmlspartner=wlpa&selectedSellerId=1284&adid=22222222227038906776&wl0=&wl1=g&wl2=c&wl3=85471557170&wl4=pla-193524271730&wl5=9017742&wl6=&wl7=&wl8=&wl9=pla&wl10=112561964&wl11=online&wl12=51208433&wl13=&veh=sem] $37 | ||
| Cost to make is less than $1 for the plastic and about $5 for the sharpening stone | | Cost to make is less than $1 for the plastic and about $5 for the sharpening stone | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:PhoneStand.jpg|200px]] | ||
| [https://www.youmagine.com/designs/phonestand] By: [[User: jclafont|Jordan LaFontaine]] | | [https://www.youmagine.com/designs/phonestand] By: [[User: jclafont|Jordan LaFontaine]] | ||
| [https://www.amazon.com/Lamicall-Desktop-Cell-Phone-Stand/dp/B014INJCT4/ref=zg_bs_7073961011_10?_encoding=UTF8&psc=1&refRID=2FXNG920X9NHN2M9V0EZ] | | [https://www.amazon.com/Lamicall-Desktop-Cell-Phone-Stand/dp/B014INJCT4/ref=zg_bs_7073961011_10?_encoding=UTF8&psc=1&refRID=2FXNG920X9NHN2M9V0EZ] $39.99 | ||
| Filament Cost: $2.84 | | Filament Cost: $2.84 Total Savings: $37.15 | ||
|- | |- | ||
|- | |- | ||
| [[Image:EZ Ski Boot Buckler.JPG|200px]] | | [[Image:EZ Ski Boot Buckler.JPG|200px]] | ||
| [https://www.youmagine.com/designs/ez-ski-boot-buckler EZ Ski Boot Buckler] By: [[User: Emheld|Elizabeth Held]] | | [https://www.youmagine.com/designs/ez-ski-boot-buckler EZ Ski Boot Buckler] By: [[User: Emheld|Elizabeth Held]] | ||
Line 1,098: | Line 1,113: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Modular Cabinet Assembly.png|200px]] | ||
| [https://www.youmagine.com/designs/modular-craft-cabinet Modular Craft Cabinet] By: [[User: | | [https://www.youmagine.com/designs/modular-craft-cabinet Modular Craft Cabinet] By: [[User: Stephen Krease|Stephen Krease]] | ||
| [https://www.amazon.com/Akro-Mils-8212-Stacking-AkroBins-Hardware/dp/B01AADDCF6/ref=pd_sim_469_42?_encoding=UTF8&pd_rd_i=B00002NB5I&pd_rd_r=6QH43QK6370X6EVB1T1A&pd_rd_w=H7OLz&pd_rd_wg=RmIxk&refRID=6QH43QK6370X6EVB1T1A&th=1 Commercial Equivalent] | | [https://www.amazon.com/Akro-Mils-8212-Stacking-AkroBins-Hardware/dp/B01AADDCF6/ref=pd_sim_469_42?_encoding=UTF8&pd_rd_i=B00002NB5I&pd_rd_r=6QH43QK6370X6EVB1T1A&pd_rd_w=H7OLz&pd_rd_wg=RmIxk&refRID=6QH43QK6370X6EVB1T1A&th=1 Commercial Equivalent] $18.23 | ||
| Filament Cost: 90 grams totaling $1.71 per box. Purchase is x6 Total Savings: $7.98 | | Filament Cost: 90 grams totaling $1.71 per box. Purchase is x6 Total Savings: $7.98 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:monopod.JPG|200px]] | ||
| Adjustable Shooting Stick/Monopod[https://www.youmagine.com/designs/adjustable-monopod-shooting-stick] By: [[User: ajensen 906|Andy Jensen]] | | Adjustable Shooting Stick/Monopod[https://www.youmagine.com/designs/adjustable-monopod-shooting-stick] By: [[User: ajensen 906|Andy Jensen]] | ||
| Commercial Equivalent[http://www.cabelas.com/product/PRIMOS-GEN-TRIGGER-STICKS/2434352.uts?searchPath=%2Fbrowse.cmd%3FcategoryId%3D734095080%26CQ_search%3Dshooting%2Bstick%26CQ_st%3Db], $50 | | Commercial Equivalent[http://www.cabelas.com/product/PRIMOS-GEN-TRIGGER-STICKS/2434352.uts?searchPath=%2Fbrowse.cmd%3FcategoryId%3D734095080%26CQ_search%3Dshooting%2Bstick%26CQ_st%3Db], $50 | ||
| Savings-$45.92 | | Savings-$45.92 Filament Cost-$1.58 Conduit Cost-$2.00 Bolt Cost-$0.50 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Laser Rangefinder Target SmallAngle.jpg|200px]] | ||
| [https://www.youmagine.com/designs/magnetic-laser-rangefinder-target Laser Rangefinder Target] By [[User: Pnjensen|Pierce Jensen]] | | [https://www.youmagine.com/designs/magnetic-laser-rangefinder-target Laser Rangefinder Target] By [[User: Pnjensen|Pierce Jensen]] | ||
| No Real Commercial Equivalent, but Survey Markers Can Run Between 100 and 2000 Dollars: [https://www.amazon.com/Metal-Prism-Reflector-Topcon-Station/dp/B01CRMG0JS]: $149.95; [http://www.engineersupply.com/Leica-GPH1P-Single-Prism-Precision-Reflector-555631.aspx]: $1950 | | No Real Commercial Equivalent, but Survey Markers Can Run Between 100 and 2000 Dollars: [https://www.amazon.com/Metal-Prism-Reflector-Topcon-Station/dp/B01CRMG0JS]: $149.95; [http://www.engineersupply.com/Leica-GPH1P-Single-Prism-Precision-Reflector-555631.aspx]: $1950 | ||
Line 1,120: | Line 1,135: | ||
|- | |- | ||
| [[ | | [[Image:tool holder.jpg|200px]] | ||
| [https://www.youmagine.com/designs/custom-tool-slotter Custom Tool Holder] | | [https://www.youmagine.com/designs/custom-tool-slotter Custom Tool Holder] | ||
| [https://www.walmart.com/ip/TEKTON-Screwdriver-Holder-and-Organizer/32924670?wmlspartner=wlpa&selectedSellerId=587&adid=22222222227021940197&wl0=&wl1=g&wl2=c&wl3=51814775951&wl4=pla-83216396591&wl5=9017741&wl6=&wl7=&wl8=&wl9=pla&wl10=112354378&wl11=online&wl12=32924670&wl13=&veh=sem], $10.75 | | | ||
[https://www.walmart.com/ip/TEKTON-Screwdriver-Holder-and-Organizer/32924670?wmlspartner=wlpa&selectedSellerId=587&adid=22222222227021940197&wl0=&wl1=g&wl2=c&wl3=51814775951&wl4=pla-83216396591&wl5=9017741&wl6=&wl7=&wl8=&wl9=pla&wl10=112354378&wl11=online&wl12=32924670&wl13=&veh=sem], $10.75 | |||
| $10.18 | | $10.18 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Guitar Holder.JPG|200px]] | ||
| [https://www.youmagine.com/designs/guitar-holder | | [https://www.youmagine.com/designs/guitar-holder Guitar Holder by Mackspletch] [[User:Mackspletch|Mackspletch]] ([[User talk:Mackspletch|talk]]) 1:05, 8 December 2016 (PST) | ||
| [http://diamondlifegear.com/HSS148BLK.html?gclid=CPrk07b049ACFcK3wAodlPcE8A], $36.00 | | [http://diamondlifegear.com/HSS148BLK.html?gclid=CPrk07b049ACFcK3wAodlPcE8A], $36.00 | ||
| $35 | | $35 | ||
Line 1,134: | Line 1,150: | ||
|- | |- | ||
| [[ | | [[Image:CommandHooks.jpeg|200px]] | ||
| Command Hook Equivalents for Med,Large, and Jumbo[https://www.youmagine.com/designs/command-hooks] | | Command Hook Equivalents for Med,Large, and Jumbo[https://www.youmagine.com/designs/command-hooks] | ||
| [ | | [https://www.command.com/3M/en_US/command/products/~/?N=5924736+3294529207+5584742&rt=r3], $2.25 2.26 and 6.34 respectively | ||
| $2.13 $2.45 and $6.34, Pre-existing hooks in my house 10 mediums, 3 larges, and 2 Jumbos potential savings:41$ | | $2.13 $2.45 and $6.34, Pre-existing hooks in my house 10 mediums, 3 larges, and 2 Jumbos potential savings:41$ | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Compound Bow Balancer Assembled.jpg|200px]] | ||
| [https://www.youmagine.com/designs/compound-bow-balancer Compound Bow Balancer] [[User:Kerautio|Kerautio]] ([[User talk:Kerautio|talk]]) 07:41, 8 December 2016 (PST) | | [https://www.youmagine.com/designs/compound-bow-balancer Compound Bow Balancer] [[User:Kerautio|Kerautio]] ([[User talk:Kerautio|talk]]) 07:41, 8 December 2016 (PST) | ||
| | | $289.99 | ||
| Purchased Components: $16.91 | | Purchased Components: $16.91 | ||
Line 1,154: | Line 1,170: | ||
|- | |- | ||
| [[ | | [[Image:Shooting rest.jpg|200px]] | ||
| [https://www.youmagine.com/designs/adjustable-shooting-rest | | [https://www.youmagine.com/designs/adjustable-shooting-rest Adjustable Shooting Rest] [[User:mcbrand|mcbrand]] | ||
| [http://www.cabelas.com/product/shooting/shooting-accessories/benches-rests%7C/pc/104792580/c/104769180/sc/104212080/mtm-front-rifle-rest/741956.uts?destination=%2Fcatalog%2Fbrowse%2Fbenches-rests%2F_%2FN-1100226%2FNs-CATEGORY_SEQ_104212080 Commercial Equivalent], $29.99 | | [http://www.cabelas.com/product/shooting/shooting-accessories/benches-rests%7C/pc/104792580/c/104769180/sc/104212080/mtm-front-rifle-rest/741956.uts?destination=%2Fcatalog%2Fbrowse%2Fbenches-rests%2F_%2FN-1100226%2FNs-CATEGORY_SEQ_104212080 Commercial Equivalent], $29.99 | ||
| $22.55 | | $22.55 | ||
Line 1,161: | Line 1,177: | ||
|- | |- | ||
| [[ | | [[Image:ice clipper.jpeg|200px|link=Special:FilePath/Ice_clipper.jpeg]] | ||
| [https://www.youmagine.com/designs/ice-screw-holder | | [https://www.youmagine.com/designs/ice-screw-holder Ice Screw Holder] [[User:vmmclain|vmmclain]] | ||
|[http://www.backcountry.com/black-diamond-ice-clipper?s=a], $7.95 | | [http://www.backcountry.com/black-diamond-ice-clipper?s=a], $7.95 | ||
| $7.79 | | $7.79 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Bottle Opener.jpg|200px]] | ||
| [https://www.youmagine.com/designs/dual-ended-beverage-opener] By: [[[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 06:44, 8 December 2016 (PST) | | [https://www.youmagine.com/designs/dual-ended-beverage-opener] By: [[[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 06:44, 8 December 2016 (PST)] | ||
| [https://www.amazon.com/HQY-Magnet-Automatic-Bottle-Opener-Black/dp/B017UMO5YW/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1481208077&sr=1-1-spons&keywords=bottle+opener&psc=1] | | [https://www.amazon.com/HQY-Magnet-Automatic-Bottle-Opener-Black/dp/B017UMO5YW/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1481208077&sr=1-1-spons&keywords=bottle+opener&psc=1] $9.99 | ||
| Savings of $9.51 | | Savings of $9.51 | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:BAC Koozie.JPG|200px]] | ||
| https://www.youmagine.com/designs/bac-beer-koozie [[User:Drhannah|Drhannah]] | | https://www.youmagine.com/designs/bac-beer-koozie [[User:Drhannah|Drhannah]] | ||
| Cost to produce ~$50 | | Cost to produce ~$50 | ||
Line 1,181: | Line 1,197: | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:CupHolderParts.jpg|200px]] | ||
| [https://www.youmagine.com/designs/subaru-impreza-cup-holder Subaru Impreza Cup Holder] [[User:fordahl|Joey Fordahl]] | | [https://www.youmagine.com/designs/subaru-impreza-cup-holder Subaru Impreza Cup Holder] [[User:fordahl|Joey Fordahl]] | ||
| No equivalent commercial product. | | No equivalent commercial product. | ||
Line 1,189: | Line 1,205: | ||
|- | |- | ||
| [[ | | [[Image:All five pieces for big money project.jpeg|200px]] | ||
| [https://www.youmagine.com/designs/tool-bag-gift-set-dry-wall-cornering-tool-float-and-paint-scraper | | [https://www.youmagine.com/designs/tool-bag-gift-set-dry-wall-cornering-tool-float-and-paint-scraper Tool bag gift set] [[User:MatthewPollack|MatthewPollack]] [[User:MatthewPollack|Matthew Pollack]] | ||
| [http://www.krafttool.com/products/by-category/drywall-plastering/corner-trowels/by-sku/DW450?gclid=CMGTpuTu5NACFQkMaQodIykDeg], $25.99 | | [http://www.krafttool.com/products/by-category/drywall-plastering/corner-trowels/by-sku/DW450?gclid=CMGTpuTu5NACFQkMaQodIykDeg], $25.99 | ||
| Savings of about $22.00 | | Savings of about $22.00 | ||
Line 1,197: | Line 1,213: | ||
|- | |- | ||
| [[ | | [[Image:Oven Knob.jpg|200px]] | ||
| [https://www.youmagine.com/designs/oven-stove-adjustment-knob Oven Stove Adjustment Knob] | | [https://www.youmagine.com/designs/oven-stove-adjustment-knob Oven Stove Adjustment Knob] By: [[User:kprice|Kyle Price]] | ||
| [http://bafiltersupply.com/Genuine-Whirlpool-Oven-Stove-Range-Knob-3191922_p_10239.html?gclid=CjwKEAiAyanCBRDkiO6M_rDroH0SJAAfZ4KLGA1IpDnit2hS5y0IXqDKVsXBuEHmn1isqr5IkGenbRoCdPvw_wcB#.WEsRMcMrIp8], $3 | | [http://bafiltersupply.com/Genuine-Whirlpool-Oven-Stove-Range-Knob-3191922_p_10239.html?gclid=CjwKEAiAyanCBRDkiO6M_rDroH0SJAAfZ4KLGA1IpDnit2hS5y0IXqDKVsXBuEHmn1isqr5IkGenbRoCdPvw_wcB#.WEsRMcMrIp8], $3 | ||
| ''Saved about $2.50 | | ''Saved about $2.50 '' | ||
|- | |- | ||
|- | |- | ||
| [[ | | [[Image:Track IR track clip.jpg|200px]] | ||
| [https://www.youmagine.com/designs/trackir-track-clip TrackIR Headpiece] | | [https://www.youmagine.com/designs/trackir-track-clip TrackIR Headpiece] By: [[User:cikaub|Chrissy Kaub]] | ||
| [https://www.amazon.com/Track-Clip-Tracker-TrackIr-units/dp/B00QKRD4DM/ref=sr_1_1?ie=UTF8&qid=1481832202&sr=8-1&keywords=track+clip+pro], $43 | | [https://www.amazon.com/Track-Clip-Tracker-TrackIr-units/dp/B00QKRD4DM/ref=sr_1_1?ie=UTF8&qid=1481832202&sr=8-1&keywords=track+clip+pro], $43 | ||
| ''Saved about $30 | | ''Saved about $30 '' | ||
|- | |- | ||
|} | |} | ||
== 2015== | == 2015 == | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! | ! Digital Photo | ||
! | ! Free Design/Link to Libre3D | ||
! | ! Commercial equivalent/Cost | ||
! | ! Approximate Savings in US$ | ||
|- | |- | ||
| [[ | | [[Image:Acoustic Phone Holder.jpg|200px]] | ||
| [ | | [https://www.thingiverse.com/thing:1211306 Acoustic Phone Holder] | ||
| [https://www.etsy.com/listing/257348546/iphone-acoustic-amplifier-iphone?utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_a-electronics_and_accessories-cell_phone_accessories-other&utm_custom1=7e26f7d9-393e-0229-7227-0000668f2877&gclid=CjwKEAiA-s6zBRDWudDL2Iic4QQSJAA4Od3X60vhzeXdhOLqp21vWG8ffmdrHXK6X-scXSGG_k5D-xoCDAjw_wcB], $50 | | | ||
[https://www.etsy.com/listing/257348546/iphone-acoustic-amplifier-iphone?utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_a-electronics_and_accessories-cell_phone_accessories-other&utm_custom1=7e26f7d9-393e-0229-7227-0000668f2877&gclid=CjwKEAiA-s6zBRDWudDL2Iic4QQSJAA4Od3X60vhzeXdhOLqp21vWG8ffmdrHXK6X-scXSGG_k5D-xoCDAjw_wcB], $50 | |||
| $45 | | $45 | ||
|- | |- | ||
| [[ | | [[Image:doublebanana.jpg|200px]] | ||
| [http://libre3d.com/category/623/Kitchen/listings/983/Double-Banana-Hook.html Double Banana Hook] [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 06:53, 19 November 2015 (PST) | | [http://libre3d.com/category/623/Kitchen/listings/983/Double-Banana-Hook.html Double Banana Hook] [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 06:53, 19 November 2015 (PST) | ||
| [http://global.rakuten.com/en/store/auc-ventistyle/item/yj-02332-02333/], ~$17 | | [http://global.rakuten.com/en/store/auc-ventistyle/item/yj-02332-02333/], ~$17 | ||
Line 1,232: | Line 1,250: | ||
|- | |- | ||
| [[ | | [[Image:Uni-Troll Base.jpg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/943/Uni-Troll-Downrigger-Base.html Uni-Troll Downrigger Base] By: [[User:Cjkmiec|Connor Kmiec]] | | [http://libre3d.com/category/556/SportsOutdoors/listings/943/Uni-Troll-Downrigger-Base.html Uni-Troll Downrigger Base] By: [[User:Cjkmiec|Connor Kmiec]] | ||
| [http://store.cannondownriggers.com/products/325083/Mounting_Base_%28Uni-Troll/], $23.99 | | [http://store.cannondownriggers.com/products/325083/Mounting_Base_%28Uni-Troll/], $23.99 | ||
| $21.76 | | $21.76 | ||
|- | |- | ||
| [[ | | [[Image:Free Float Handguard.jpg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/946/AR15-Freefloat-Handguard.html AR15 Freefloat Handguard] By: [[User:Atketter|Austin Ketterhagen]] | | [http://libre3d.com/category/556/SportsOutdoors/listings/946/AR15-Freefloat-Handguard.html AR15 Freefloat Handguard] By: [[User:Atketter|Austin Ketterhagen]] | ||
| [https://www.veriforcetactical.com/product/ar15-keymod-free-float-carbine-handguard-in-od-green/], $99.99 | | [https://www.veriforcetactical.com/product/ar15-keymod-free-float-carbine-handguard-in-od-green/], $99.99 | ||
| $97.66 | | $97.66 | ||
|- | |- | ||
| [[ | | [[Image:SkiWaxingVises.jpg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/949/Ski-Waxing-Vises.html Ski Waxing Vises] By: [[User:Mmandres|Matthew Andres]] | | [http://libre3d.com/category/556/SportsOutdoors/listings/949/Ski-Waxing-Vises.html Ski Waxing Vises] By: [[User:Mmandres|Matthew Andres]] | ||
| [ | | [https://www.amazon.com/Wide-Freeride-Swix-Power-T0147N/dp/B005W1DJ5U/ref=sr_1_1?ie=UTF8&qid=1449627325&sr=8-1&keywords=power+vise Power Pro Vise], $269.99 | ||
| $233.96 | | $233.96 | ||
|- | |- | ||
|- | |- | ||
|[[File:BlowBackNozzleInternals.jpg|200px]] | | [[File:BlowBackNozzleInternals.jpg|200px]] | ||
|[http://libre3d.com/category/593/Mechanical-Toys/listings/981/Prototype-Blowback-Nozzle.html Prototype Reciprocating Blowback Nozzle] | | [http://libre3d.com/category/593/Mechanical-Toys/listings/981/Prototype-Blowback-Nozzle.html Prototype Reciprocating Blowback Nozzle] | ||
|Typical Nozzle $25-85 | | Typical Nozzle $25-85 | ||
|$24-$84 | | $24-$84 | ||
|- | |- | ||
| [[ | | [[Image:Table saw insert.jpg|200px]] | ||
| [http://libre3d.com/category/568/Tools/listings/947/Delta-Table-Saw-minimum-clearance-blade-insert.html Delta Minimal Clearance Table Saw Insert] By: [[User:Prstlouis|Paul StLouis]] | | [http://libre3d.com/category/568/Tools/listings/947/Delta-Table-Saw-minimum-clearance-blade-insert.html Delta Minimal Clearance Table Saw Insert] By: [[User:Prstlouis|Paul StLouis]] | ||
| [http://www.toolbarn.com/delta-36-861.html?gclid=CKT8opmgzckCFYM8aQodax8M3Q&ad=54710738894], $33.23 | | [http://www.toolbarn.com/delta-36-861.html?gclid=CKT8opmgzckCFYM8aQodax8M3Q&ad=54710738894], $33.23 | ||
| $29.10 | | $29.10 | ||
|- | |- | ||
| [[ | | [[Image:Cellphone Car Cup Holder.jpeg|200px]] | ||
| [http://libre3d.com/category/731/Storage/listings/956/3D-printed-cell-phone-cup-hold-for-lg-g3.html Cellphone Car Cup Holder] [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 18:53, 9 December 2015 (PST) | | [http://libre3d.com/category/731/Storage/listings/956/3D-printed-cell-phone-cup-hold-for-lg-g3.html Cellphone Car Cup Holder] [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 18:53, 9 December 2015 (PST) | ||
| [ | | [https://www.amazon.com/Macally-MCUPMP-Adjustable-Automobile-Smartphones/dp/B007GNNH3Q/ref=sr_1_2?ie=UTF8&qid=1449715767&sr=8-2&keywords=Cellphone+car+cup+holder], $13 | ||
| ~$9 | | ~$9 | ||
|- | |- | ||
| [[ | | [[Image:Pong Paddle.jpeg|200px]] | ||
| [http://libre3d.com/category/593/Mechanical-Toys/listings/976/3D-Printable-Ping-Pong-Paddle.html Ping Pong Paddle] | | [http://libre3d.com/category/593/Mechanical-Toys/listings/976/3D-Printable-Ping-Pong-Paddle.html Ping Pong Paddle] | ||
| [http://www.ssww.com/item/pro-table-tennis-paddle-W8257/?aid=GOG&cid=3294&oc=W3355&promo=freeshipping&utm_campaign=pla&utm_medium=cpc&utm_source=google&utm_content=W8257&gclid=Cj0KEQiAg7ayBRD8qqSGt-fj6uYBEiQAucjOwb1GGMNULdIv2i0n-bmUkFd00QC3NzEVdjUe7ZnQx-kaAkm78P8HAQ], ~$6.49, for standard paddle | | [http://www.ssww.com/item/pro-table-tennis-paddle-W8257/?aid=GOG&cid=3294&oc=W3355&promo=freeshipping&utm_campaign=pla&utm_medium=cpc&utm_source=google&utm_content=W8257&gclid=Cj0KEQiAg7ayBRD8qqSGt-fj6uYBEiQAucjOwb1GGMNULdIv2i0n-bmUkFd00QC3NzEVdjUe7ZnQx-kaAkm78P8HAQ], ~$6.49, for standard paddle | ||
| $5.20, plus never needing another paddle again!! | | $5.20, plus never needing another paddle again | ||
! | |||
! | |||
! ! | |||
|- | |- | ||
| [[ | | [[Image:Glasses clip.jpg|200px]] | ||
| [http://libre3d.com/category/603/Accessories/listings/964/Universal-Glasses-Clip.html Desk or Car Glasses Clip Accessory], [[User:Thomas Korejsza]] Cost of plastic $0.41 | | [http://libre3d.com/category/603/Accessories/listings/964/Universal-Glasses-Clip.html Desk or Car Glasses Clip Accessory], [[User:Thomas Korejsza]] Cost of plastic $0.41 | ||
| [ | | [https://www.amazon.com/Sunglasses-Purpose-Sunglass-Eyeglasses-Vehicle/dp/B00P7VWW1W/ref=sr_1_5?ie=UTF8&qid=1449756090&sr=8-5&keywords=Sunglasses+clip+visor], Visor Clip $12.90 | ||
| $12.49 | | $12.49 | ||
|- | |- | ||
| [[ | | [[Image:Earring holder.jpeg|200px]] | ||
| [http://libre3d.com/category/603/Accessories/listings/987/Earring-holder.html Earring holder] Earring holder [[User:Dhwani]] ([[User talk:Dhwani|talk]]) | | [http://libre3d.com/category/603/Accessories/listings/987/Earring-holder.html Earring holder] Earring holder [[User:Dhwani]] ([[User talk:Dhwani|talk]]) | ||
| ~$32 | | ~$32 | ||
| ~$31 | | ~$31 | ||
|- | |- | ||
| [[ | | [[Image:Microwave Gears.jpg|200px]] | ||
| [http://libre3d.com/category/623/Kitchen/listings/967/Microwave-Turntable-Gear-Replacements.html Microwave Gear Replacement Parts] | | [http://libre3d.com/category/623/Kitchen/listings/967/Microwave-Turntable-Gear-Replacements.html Microwave Gear Replacement Parts] | ||
| [https://www.appliancezone.com/ShowProduct.aspx?ID=67287&gclid=CJbxnvLq0MkCFcKGaQodMugAsw], $2.80 | | [https://www.appliancezone.com/ShowProduct.aspx?ID=67287&gclid=CJbxnvLq0MkCFcKGaQodMugAsw], $2.80 | ||
| $2.60 | | $2.60 | ||
|- | |- | ||
| [[ | | [[Image:Bottle Tree Assembly.jpg|200px]] | ||
| [http://libre3d.com/category/689/Food-Related/listings/954/Bottle-Drying-Tree.html Bottle Drying Tree] By: [[User:Robertarden|Robert Arden]] | | [http://libre3d.com/category/689/Food-Related/listings/954/Bottle-Drying-Tree.html Bottle Drying Tree] By: [[User:Robertarden|Robert Arden]] | ||
| ~$20 | | ~$20 | ||
| ~$18 | | ~$18 | ||
Line 1,297: | Line 1,318: | ||
| [[File:IMAG0389.jpg|200px]] | | [[File:IMAG0389.jpg|200px]] | ||
| [http://libre3d.com/category/696/Board-Games/listings/970/Euchre-Score-Board.html Euchre Score Board] By: [[User:Hjhunt|Hjhunt]] | | [http://libre3d.com/category/696/Board-Games/listings/970/Euchre-Score-Board.html Euchre Score Board] By: [[User:Hjhunt|Hjhunt]] | ||
| ~$10.00 | | ~$10.00 | ||
| ~$9.06 | | ~$9.06 | ||
|- | |- | ||
| [[ | | [[Image:Coat hook with slider base.jpg|200px]] | ||
| | | Coat Hook with slider base | ||
By: [[User:Handychandra7|Handychandra7]] ([[User talk:Handychandra7|talk]]) | By: [[User:Handychandra7|Handychandra7]] ([[User talk:Handychandra7|talk]]) | ||
| Depends on the material, ranging from $20 - $80 | | Depends on the material, ranging from $20 - $80 | ||
Line 1,309: | Line 1,330: | ||
|- | |- | ||
| [[ | | [[Image:20151209 185134 HDR.jpg|200px]] | ||
| [http://libre3d.com/category/603/Accessories/listings/951/Aquarium-Needle-Impeller.html] | | [http://web.archive.org/web/20170515011326/http://libre3d.com:80/category/603/Accessories/listings/951/Aquarium-Needle-Impeller.html] | ||
By: [ | By: [https://www.appropedia.org/User:Brhutchi] ([[User talk:Handychandra7|talk]]) | ||
| the full assembly costs around $40, 37 minutes to print, 5 minutes to clean part | | the full assembly costs around $40, 37 minutes to print, 5 minutes to clean part | ||
| 12 grams of PLA for ~$0.30, savings around $39.70 | | 12 grams of PLA for ~$0.30, savings around $39.70 | ||
|- | |- | ||
| [[ | | [[Image:9vbatterybox.jpg|200px]] | ||
| [http://libre3d.com/category/551/Other/listings/953/duel-9V-battery-box.html Duel 9V Battery Box] By: [[User:Mikehartl|Mike Hartl]] | | [http://libre3d.com/category/551/Other/listings/953/duel-9V-battery-box.html Duel 9V Battery Box] By: [[User:Mikehartl|Mike Hartl]] | ||
| [http://www.guitarelectronics.com/product/9VB18/Dual-9-Volt-Battery-Box-for-18-Volt-Active-Guitar-Bass.html], $30 | | [http://www.guitarelectronics.com/product/9VB18/Dual-9-Volt-Battery-Box-for-18-Volt-Active-Guitar-Bass.html], $30 | ||
Line 1,322: | Line 1,343: | ||
|- | |- | ||
| [[ | | [[Image:beerholder.jpg|200px]] | ||
| [http://libre3d.com/category/653/Accessories/listings/960/Beer-Holder-for-Desk.html Beerholder on Libre3D] & [ | | [http://libre3d.com/category/653/Accessories/listings/960/Beer-Holder-for-Desk.html Beerholder on Libre3D] & [https://www.thingiverse.com/thing:1188195 Can Holder on Thingiverse with FreeCAD file] | ||
| [http://www.walgreens.com/store/c/nova-mobility-cup-holder/ID=prod5867379-product?ext=gooHome_Health_Care_Solutions_PLA_Walker_Accessories_prod5867379_pla&adtype=pla&kpid=sku5866246&sst=75d6c631-ace5-4f2d-86b1-2ae1f9c79db5 Comparable Bottle Holder], $9.99 | | [http://www.walgreens.com/store/c/nova-mobility-cup-holder/ID=prod5867379-product?ext=gooHome_Health_Care_Solutions_PLA_Walker_Accessories_prod5867379_pla&adtype=pla&kpid=sku5866246&sst=75d6c631-ace5-4f2d-86b1-2ae1f9c79db5 Comparable Bottle Holder], $9.99 | ||
| 61 grams of PLA for about 1.65 resulting in cost savings of $8.34 | | 61 grams of PLA for about 1.65 resulting in cost savings of $8.34 | ||
|- | |- | ||
| [[ | | [[Image:potatomasher.jpg|200px]] | ||
| [http://libre3d.com/category/623/Kitchen/listings/955/Potato-Masher.html Potato Masher] By: [[User:ejmarsha|Ethan Marshall]] | | [http://libre3d.com/category/623/Kitchen/listings/955/Potato-Masher.html Potato Masher] By: [[User:ejmarsha|Ethan Marshall]] | ||
| [https://jet.com/product/detail/0b15e12c1db9422aab6c5215b8c2d3f3?jcmp=pla:ggl:home_garden_a3:kitchen_dining_kitchen_tools_utensils_a3_other:na:na:na:na:na:2&code=PLA15&k_clickid=8b620630-920f-491f-83a1-06bb1e2c0414&gclid=CJOwy5ec0MkCFQIHaQodue4BmA Commercial Potato Masher], $8.50 | | [https://jet.com/product/detail/0b15e12c1db9422aab6c5215b8c2d3f3?jcmp=pla:ggl:home_garden_a3:kitchen_dining_kitchen_tools_utensils_a3_other:na:na:na:na:na:2&code=PLA15&k_clickid=8b620630-920f-491f-83a1-06bb1e2c0414&gclid=CJOwy5ec0MkCFQIHaQodue4BmA Commercial Potato Masher], $8.50 | ||
Line 1,334: | Line 1,355: | ||
|- | |- | ||
| [[ | | [[Image:cat6Audio.jpg|150px]] | ||
| [http://libre3d.com/category/723/AudioVideo/listings/959/Cat6e-Shielded-Audio-Endpoints.html Cat6 Audio End Point] By:[[ | | [http://libre3d.com/category/723/AudioVideo/listings/959/Cat6e-Shielded-Audio-Endpoints.html Cat6 Audio End Point] By:[[User:tacopaul11|Paul Bristol]] | ||
| [http://www.ratsoundsales.com/p/soundtools-catsnake.html], $360 | | [http://www.ratsoundsales.com/p/soundtools-catsnake.html], $360 | ||
| Cost of End Point: $43, Total Cost Savings: $317 | | Cost of End Point: $43, Total Cost Savings: $317 | ||
|- | |- | ||
| [[Image:With ties.JPG|300px]] | |||
| [[ | | [http://libre3d.com/category/731/Storage/listings/963/Necktie-Hanger.html Necktie Hanger] By:[[User:tdernest|Tyler Ernest]] | ||
| [http://libre3d.com/category/731/Storage/listings/963/Necktie-Hanger.html Necktie Hanger] By:[[ | | [https://www.amazon.com/Tie-Rack-Organizer-Aristocrat-Homewares/dp/B00FIXI1FA Tie Hanger], $16.29 | ||
| [ | |||
| $15.65 | | $15.65 | ||
|- | |- | ||
| [[ | | [[Image:Toothbrush holder.jpg|200px]] | ||
| [http://libre3d.com/category/602/Bathroom/listings/977/Toothbrush-holder.html Toothbrush holder] By:[[ | | [http://libre3d.com/category/602/Bathroom/listings/977/Toothbrush-holder.html Toothbrush holder] By:[[User:Erik Bain|Erik Bain]] | ||
| [http://www.target.com/p/threshold-toothbrush-holder-black-metal/-/A-16649239#prodSlot=medium_1_28&term=toothbrush+holder Commercial Equivalent], $7.59 | | [http://www.target.com/p/threshold-toothbrush-holder-black-metal/-/A-16649239#prodSlot=medium_1_28&term=toothbrush+holder Commercial Equivalent], $7.59 | ||
| Cost of toothbrush holder: $1.03, Total Cost Savings: $6.56 | | Cost of toothbrush holder: $1.03, Total Cost Savings: $6.56 | ||
|- | |- | ||
| [[ | | [[Image:Phone Mount 4.jpg|200px]] | ||
| [http://libre3d.com/category/620/Bicycle/listings/957/Longboard-Droid-Turbo-Mount.html Longboard Phone Mount] By:[[ | | [http://libre3d.com/category/620/Bicycle/listings/957/Longboard-Droid-Turbo-Mount.html Longboard Phone Mount] By:[[User:Wcvenis|William Venis]] | ||
| [http://www.shapeways.com/product/ZB2B5V5AM/gopro-skateboard-riser-mount?li=gmerchant&gclid=CPeK19uh0MkCFchJXgodRtUNSg GOPRO SKATEBOARD RISER MOUNT], $31.58 | | [http://www.shapeways.com/product/ZB2B5V5AM/gopro-skateboard-riser-mount?li=gmerchant&gclid=CPeK19uh0MkCFchJXgodRtUNSg GOPRO SKATEBOARD RISER MOUNT], $31.58 | ||
[ | [https://www.ebay.com/itm/like/111760840580?ul_noapp=true&chn=ps&lpid=82 Aluminum Alloy Skateboard Mount Holder for Gopro], $6.64 | ||
| Cost of printed phone mount: $0.69, Total Cost Savings: $5.95 - $30.90 | | Cost of printed phone mount: $0.69, Total Cost Savings: $5.95 - $30.90 | ||
|- | |- | ||
| [[ | | [[Image:Modular Wine Rack.JPG|300px]] | ||
| [http://libre3d.com/category/623/Kitchen/listings/961/Modular-wine-rack.html Modular Wine Rack] By:[[ | | [http://libre3d.com/category/623/Kitchen/listings/961/Modular-wine-rack.html Modular Wine Rack] By:[[User:KevMan|Kevin Sunderland]] | ||
| [http://www.bedbathandbeyond.com/store/product/wine-enthusiast-modular-12-bottle-wine-rack/1041218433?skuId=41218433&mcid=PS_googlepla_nonbrand_winebar_&adpos=1o1&creative=43742615149&device=c&matchtype=&network=g&gclid=Cj0KEQiAv5-zBRCAzfWGu-2jo70BEiQAj_F8oESZ2t9buyEOO2zfWL3ynWK-C3REWso1T0x6xOFvkL4aAutb8P8HAQ Modular Wine Rack -low end], $29.99 | | [http://www.bedbathandbeyond.com/store/product/wine-enthusiast-modular-12-bottle-wine-rack/1041218433?skuId=41218433&mcid=PS_googlepla_nonbrand_winebar_&adpos=1o1&creative=43742615149&device=c&matchtype=&network=g&gclid=Cj0KEQiAv5-zBRCAzfWGu-2jo70BEiQAj_F8oESZ2t9buyEOO2zfWL3ynWK-C3REWso1T0x6xOFvkL4aAutb8P8HAQ Modular Wine Rack -low end], $29.99 | ||
[http://www.wineenthusiast.com/hive-modular-wine-rack-with-dividers-%28walnut%29.asp?AFID=ZFRG&SRCCODE=PGGL10&adpos=1o30&creative=78407366301&device=c&matchtype=&network=g&gclid=Cj0KEQiAv5-zBRCAzfWGu-2jo70BEiQAj_F8oElThu_-QPxEud2t4_CZgDKKRGCz60y16J1B5STho_EaAi2m8P8HAQ - Modular Wine Rack - high end], $119.95 | [http://www.wineenthusiast.com/hive-modular-wine-rack-with-dividers-%28walnut%29.asp?AFID=ZFRG&SRCCODE=PGGL10&adpos=1o30&creative=78407366301&device=c&matchtype=&network=g&gclid=Cj0KEQiAv5-zBRCAzfWGu-2jo70BEiQAj_F8oElThu_-QPxEud2t4_CZgDKKRGCz60y16J1B5STho_EaAi2m8P8HAQ - Modular Wine Rack - high end], $119.95 | ||
Line 1,367: | Line 1,387: | ||
|- | |- | ||
| [[ | | [[Image:Variable Holder Clamp.jpg|300px]] | ||
| [http://libre3d.com/category/653/Accessories/listings/962/Variable-Holder-Clamp.html Variable Holder Clamp] By:[[ | | [http://libre3d.com/category/653/Accessories/listings/962/Variable-Holder-Clamp.html Variable Holder Clamp] By:[[User:ampringl|Adam Pringle]] | ||
| [ | | [https://www.bhphotovideo.com/c/product/1107611-REG/auray_cohh_1_headphone_holder_with_padded.html Headphone holder], $19.99 | ||
| Cost of Variable Holder Clamp: $3.93, Total Cost Savings: $16.09 | | Cost of Variable Holder Clamp: $3.93, Total Cost Savings: $16.09 | ||
|- | |- | ||
| [[Image:Extended Razor Stand Complete.jpg|300px]] | |||
| [[ | |||
| [http://libre3d.com/category/602/Bathroom/listings/965/Extended-Razor-Stand.html Extended Razor Stand] By:[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 23:19, 9 December 2015 (PST) | | [http://libre3d.com/category/602/Bathroom/listings/965/Extended-Razor-Stand.html Extended Razor Stand] By:[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 23:19, 9 December 2015 (PST) | ||
| No commercial equivalent multi-razor stand exists. Some vendors make [https://www.etsy.com/listing/259945017/wenge-6-razor-display-shaving-stand?ref=shop_home_active_3 custom artisan stands], $60 | | No commercial equivalent multi-razor stand exists. Some vendors make [https://www.etsy.com/listing/259945017/wenge-6-razor-display-shaving-stand?ref=shop_home_active_3 custom artisan stands], $60 | ||
Line 1,382: | Line 1,399: | ||
|- | |- | ||
| [[ | | [[Image:KIndlecase.jpg|300px]] | ||
| | | kindle case By:[[User:Ngtanike|Ngtanike]] ([[User talk:Ngtanike|talk]]) 00:16, 10 December 2015 (PST) | ||
| http://www.amazon.com/Fintie-Kindle-Paperwhite-SmartShell-Case/dp/B009S2CXLK/ref=sr_1_1?ie=UTF8&qid=1449735162&sr=8-1&keywords=kindle+cover, 15$ | | [https://www.amazon.com/Fintie-Kindle-Paperwhite-SmartShell-Case/dp/B009S2CXLK/ref=sr_1_1?ie=UTF8&qid=1449735162&sr=8-1&keywords=kindle+cover http://www.amazon.com/Fintie-Kindle-Paperwhite-SmartShell-Case/dp/B009S2CXLK/ref=sr_1_1?ie=UTF8&qid=1449735162&sr=8-1&keywords=kindle+cover], 15$ | ||
| Cost of Kindle case: $3, Total Cost Savings: $12 | | Cost of Kindle case: $3, Total Cost Savings: $12 | ||
|- | |- | ||
| [[ | | [[Image:Pocket Pegs.JPG|200px]] | ||
| [http://libre3d.com/category/696/Board-Games/listings/966/Triangle-Peg-game.html Pocket Peg Triangle Game] | | [http://libre3d.com/category/696/Board-Games/listings/966/Triangle-Peg-game.html Pocket Peg Triangle Game] | ||
| There is a larger size available to buy at [http://www.officeplayground.com/Peg-Game-P1691.aspx?gclid=CJzQut3o0MkCFQGTaQod-iEJnQ wooden triangle peg game] for,$2.69. I havent been able to find a pocket size version. | | There is a larger size available to buy at [http://www.officeplayground.com/Peg-Game-P1691.aspx?gclid=CJzQut3o0MkCFQGTaQod-iEJnQ wooden triangle peg game] for,$2.69. I havent been able to find a pocket size version. | ||
| $2.11 (78%) | | $2.11 (78%) | ||
Line 1,395: | Line 1,412: | ||
| [[File:Mossberg 500 Accesories.jpg|200px]] | | [[File:Mossberg 500 Accesories.jpg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/973/Mossberg-500-Accesories.html Mossberg 500 Accesories] | | [http://libre3d.com/category/556/SportsOutdoors/listings/973/Mossberg-500-Accesories.html Mossberg 500 Accesories] | ||
| [ | | [https://www.amazon.com/Ultimate-Arms-Gear-Mossberg-Maverick/dp/B00NCEXQ84/ref=sr_1_4?ie=UTF8&qid=1449738587&sr=8-4&keywords=mossberg+500+pistol+grip Grip] $19.95, [https://www.amazon.com/Ultimate-Arms-Gear-Tactical-Picatinny/dp/B007IVV8UK/ref=sr_1_15?ie=UTF8&qid=1449737284&sr=8-15&keywords=mossberg+500+picatinny+rail Picatinny Rail] $14.99 | ||
| Grip: $15.49, Picatinny Rail: $14.69 | | Grip: $15.49, Picatinny Rail: $14.69 | ||
|- | |- | ||
| [[ | | [[Image:Rachelcookiecutter.jpg|300px]] | ||
| [http://libre3d.com/category/623/Kitchen/listings/969/Face-Cookie-Cutter.html Face Cookie Cutter] | | [http://libre3d.com/category/623/Kitchen/listings/969/Face-Cookie-Cutter.html Face Cookie Cutter] | ||
| [https://www.etsy.com/shop/Copypastry?ref=l2-shopheader-name Custom Cookie Cutter], $50.77 | | [https://www.etsy.com/shop/Copypastry?ref=l2-shopheader-name Custom Cookie Cutter], $50.77 | ||
| $50.54 (99.5%) | | $50.54 (99.5%) | ||
|- | |- | ||
| [[ | | [[Image:Toothbrush Stand.jpg|300px]] | ||
| [http://libre3d.com/category/660/Delta/listings/972/Toothbrush-Stand.html Toothbrush stand] By: [[User:shyams19|Shyam Sanjeevi]] | | [http://web.archive.org/web/20170517001704/http://libre3d.com:80/category/660/Delta/listings/972/Toothbrush-Stand.html Toothbrush stand] By: [[User:shyams19|Shyam Sanjeevi]] | ||
| [ | | [https://www.amazon.com/InterDesign-Collection-Toothbrush-Stand-White/dp/B00BETR5HW/ref=sr_1_sc_3?ie=UTF8&qid=1449749148&sr=8-3-spell&keywords=totth+brush+stand - Toothbrush stand], $9.99 | ||
| Cost of Toothbrush Stand: ~$10, Total Cost Savings: $9 (90%) | | Cost of Toothbrush Stand: ~$10, Total Cost Savings: $9 (90%) | ||
|- | |- | ||
| [[ | | [[Image:Hockey Tape Dispenser.jpg|200px]] | ||
| [http://libre3d.com/category/717/Hockey/listings/971/Hockey-Tape-CaseDispenser.html Hockey Tape Dispenser] By: [[User:Hdpowers|Hannah Powers]] | | [http://libre3d.com/category/717/Hockey/listings/971/Hockey-Tape-CaseDispenser.html Hockey Tape Dispenser] By: [[User:Hdpowers|Hannah Powers]] | ||
| ~$12 (Not currently available) | | ~$12 (Not currently available) | ||
| ~$10 (83%) | | ~$10 (83%) | ||
|- | |- | ||
| [[ | | [[Image:Ornament rgb led.jpg|200px]] | ||
| [http://libre3d.com/category/718/Holidays/listings/974/RGB-LED-Customizable-Ornament.html LED Christmas Ornament] | | [http://libre3d.com/category/718/Holidays/listings/974/RGB-LED-Customizable-Ornament.html LED Christmas Ornament] | ||
| [ | | [https://www.amazon.com/StealStreet-SS-UG-HD-0374-Christmas-Ornament-Decorated/dp/B0042TQXYM/ref=sr_1_8?ie=UTF8&qid=1449749361&sr=8-8&keywords=light+up+christmas+ornaments+kids], $20 | ||
| ~$13 | | ~$13 | ||
|- | |- | ||
|[[Image: | | [[Image:polish holder.jpg|200px]] | ||
| [http://libre3d.com/category/653/Accessories/listings/979/Rocking-Nail-Polish-Holder.html Rocking Nail Polish Holder] | | [http://libre3d.com/category/653/Accessories/listings/979/Rocking-Nail-Polish-Holder.html Rocking Nail Polish Holder] | ||
| [ | | [https://www.amazon.com/Lady-Spill-Proof-Polish-Holder/dp/B00BJKUFZK/ref=sr_1_2?s=beauty&ie=UTF8&qid=1449755991&sr=1-2&keywords=lady+bug+nail+polish+holder Spill Proof Polish Holder on Amazon] $11.45 | ||
|$10 | | $10 | ||
|- | |- | ||
|[[File: | | [[File:autozoom mount.jpg|200px]] | ||
|[http://libre3d.com/category/693/Engineering/listings/978/DSLR-Automated-zoom-mount.html DSLR Automated Zoom Mount] By:[[ | | [http://libre3d.com/category/693/Engineering/listings/978/DSLR-Automated-zoom-mount.html DSLR Automated Zoom Mount] By:[[User:djchopp|Derek Chopp]] | ||
|[ | | [https://www.amazon.com/Opteka-FFR-900-Motorized-Controller-Camcorders/dp/B00AQNRXDS FFR-900] $249.95 | ||
|$229.95 | | $229.95 | ||
|- | |- | ||
|[[Image:Controller holder.jpeg|200px]] | | [[Image:Controller holder.jpeg|200px]] | ||
| [http://libre3d.com/category/695/Games/listings/985/TV-Mounted-Controller-Holder.html TV Mounted Contoller holder] | |||
| Commercial Equivalent: $20.00 | |||
| Approximately $19.00 | |||
|- | |- | ||
|[[File:BatteryCup.jpg|200px]] | | [[File:BatteryCup.jpg|200px]] | ||
|[http://libre3d.com/category/554/Electronics/listings/984/APX-Series-to-XTS-Series-Battery-Adapter-Cup.html APX->XTS series battery adapter] By:[[ | | [http://libre3d.com/category/554/Electronics/listings/984/APX-Series-to-XTS-Series-Battery-Adapter-Cup.html APX->XTS series battery adapter] By:[[User:Azw|Matthew Zawisza]] | ||
|[ | | [https://www.amazon.com/Motorola-INSERT-UNIVERSAL-SUC-QTY/dp/B00JWTE80S NNTN8169A] $51.98 | ||
|$51.97 | | $51.97 | ||
|- | |- | ||
|Coming Soon! | | Coming Soon! | ||
|[http://libre3d.com/category/561/Gizmos/listings/982/2-axis-Gimbal-System.html 2-Axis Gimbal System] By:[[ | | [http://libre3d.com/category/561/Gizmos/listings/982/2-axis-Gimbal-System.html 2-Axis Gimbal System] By:[[User:Swallen|Spencer Allen]] | ||
|[http://www.highpointscientific.com/meade-80-mm-etx-80at-tc-refractor-telescope-package-0805-04-21?utm_source=google&utm_medium=cse&utm_term=MEA-0805-04-21&gclid=CNH4-frK0ckCFQ-RaQoddQgCEA] $240 | | [http://www.highpointscientific.com/meade-80-mm-etx-80at-tc-refractor-telescope-package-0805-04-21?utm_source=google&utm_medium=cse&utm_term=MEA-0805-04-21&gclid=CNH4-frK0ckCFQ-RaQoddQgCEA] $240 | ||
|Around $50 in savings compared to the listed example, though my design is considerably more capable. | | Around $50 in savings compared to the listed example, though my design is considerably more capable. | ||
|- | |- | ||
|[[ | | [[Image:Bottle Scoring Tool.JPG|300px]] | ||
|[http://libre3d.com/category/569/Hand-Tools/listings/980/Adjustable-Bottle-Scorer.html] By:[[ | | [http://libre3d.com/category/569/Hand-Tools/listings/980/Adjustable-Bottle-Scorer.html] By:[[User:Austin Howland|Austin Howland]] | ||
|[http://www.bottlecutting.com/products/kinkajou-bottle-cutter], $49.99 | | [http://www.bottlecutting.com/products/kinkajou-bottle-cutter], $49.99 | ||
|$41.10 | | $41.10 | ||
|- | |- | ||
|[[File:ChocolateMold.jpg|200px]] | | [[File:ChocolateMold.jpg|200px]] | ||
|[http://libre3d.com/category/574/Sculptures/listings/975/Chocolate-Mold.htmll Customized Chocolate Mold] By:[[ | | [http://libre3d.com/category/574/Sculptures/listings/975/Chocolate-Mold.htmll Customized Chocolate Mold] By:[[User:tmjohnst|Troy Johnston]] | ||
|~$40 | | ~$40 | ||
|~$38 | | ~$38 | ||
|- | |- | ||
|[[ | | [[Image:Hanger Hook.JPG|200px]] | ||
|[http://libre3d.com/category/733/Hooks/listings/986/Clothes-Hanger-Hook.html] By:[[ | | [http://libre3d.com/category/733/Hooks/listings/986/Clothes-Hanger-Hook.html] By:[[User:zmchenie|Zach Chenier]] | ||
|[ | | [https://www.ebay.com/itm/8-Pcs-Space-Saver-Wonder-Magic-Clothes-Hanger-Rack-Clothing-Hook-Organizer-Set/231629775900?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3Da610c33d61564e208118ce5ccd488769%26pid%3D100338%26rk%3D1%26rkt%3D5%26mehot%3Dpp%26sd%3D272062174972], $5.00 | ||
|$4.45 | | $4.45 | ||
|- | |- | ||
|[[ | | [[Image:Multipurpose cell-phone dock with slots for stationery and a pair of specs.jpg|200px]] | ||
| [http://libre3d.com/category/543/3D-Models/listings/988/Multipurpose-stand-for-cell-phone,-spectacles-and-Stationery.html Multipurpose stand for cell-phone, spectacles, stationery and tools] By:[[ | | [http://libre3d.com/category/543/3D-Models/listings/988/Multipurpose-stand-for-cell-phone,-spectacles-and-Stationery.html Multipurpose stand for cell-phone, spectacles, stationery and tools] By:[[User:Karan|Karan Dhankani]] | ||
|This also means that I could customize to exactly my cell-phone size and | | This also means that I could customize to exactly my cell-phone size and the of pair spectacles |Market Price(mainly because it's not easily available): $48 | ||
|Savings - $46.5 (~97% savings) | | Savings - $46.5 (~97% savings) | ||
|- | |- | ||
| [[ | | [[Image:Wheel andguards.JPG|300px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/989/Longboard-Bearing-Water,-Rust-and-Dust-Sheild.html | | [http://libre3d.com/category/556/SportsOutdoors/listings/989/Longboard-Bearing-Water,-Rust-and-Dust-Sheild.html Longboard bearing rust, debris and water guard] By:[[User:Pjgoreck|Pjgoreck]] ([[User talk:Pjgoreck|talk]]) | ||
| There is currently no commercial version of a longboard bearing rust, debris and water guard. The model is parametric and can be fitted to any wheel size. The size it is altered to will affect the cost slightly. | | There is currently no commercial version of a longboard bearing rust, debris and water guard. The model is parametric and can be fitted to any wheel size. The size it is altered to will affect the cost slightly. | ||
| Plastic Cost: Aprox. $1 | | Plastic Cost: Aprox. $1 | ||
|- | |- | ||
| [[ | | [[Image:777 Big money Folding table.png|300px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/989/Longboard-Bearing-Water,-Rust-and-Dust-Sheild.html | | [http://libre3d.com/category/556/SportsOutdoors/listings/989/Longboard-Bearing-Water,-Rust-and-Dust-Sheild.html Longboard bearing rust, debris and water guard] By:[[User:Pratiksha|Pratiksha Rakhe]] | ||
| A modifiable laptop table with table top and stand. Can be attached with nut, bolts and hinges. | | A modifiable laptop table with table top and stand. Can be attached with nut, bolts and hinges. | ||
| Savings - $40 (~80% savings) | | Savings - $40 (~80% savings) | ||
Line 1,485: | Line 1,505: | ||
|} | |} | ||
==2014== | == 2014 == | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! | ! Digital Photo | ||
! | ! Free Design/Link to Libre3D | ||
! | ! Commercial equivalent/Cost | ||
! | ! Approximate Savings in US$ | ||
|- | |- | ||
|[[File:Hockey helper.JPG|200px]] | | [[File:Hockey helper.JPG|200px]] | ||
|[http://libre3d.com/category/556/SportsOutdoors/listings/799/hockey-helper.html Hockey Helper] | | [http://libre3d.com/category/556/SportsOutdoors/listings/799/hockey-helper.html Hockey Helper] | ||
|[http://www.hockeyshot.com/Soft-Hands-Stickhandling-Device-p/stickhandling-aid-004.htm]-Always unavailable but is $10.95 | | [http://www.hockeyshot.com/Soft-Hands-Stickhandling-Device-p/stickhandling-aid-004.htm]-Always unavailable but is $10.95 | ||
|$9.98 | | $9.98 | ||
|- | |- | ||
|[[File:1UPIncenseHolder.JPG|200px]] | | [[File:1UPIncenseHolder.JPG|200px]] | ||
|[http://libre3d.com/category/555/Toys/listings/810/1UP-Incense-Holder.html 1UP Incense / Candle Holder] | | [http://libre3d.com/category/555/Toys/listings/810/1UP-Incense-Holder.html 1UP Incense / Candle Holder] | ||
|[ | | [https://www.amazon.com/Lotus-Incense-Burner-T-light-Meditation/dp/B00FXNY60O/ref=sr_1_15?s=home-garden&ie=UTF8&qid=1418086548&sr=1-15&keywords=incense+cone+holder], Closest commercial equivalent -$8.99 | ||
|$6.92 | | $6.92 | ||
|- | |- | ||
|[[File:Arduino Wall Mount.JPG|200px]] | | [[File:Arduino Wall Mount.JPG|200px]] | ||
|[http://libre3d.com/category/657/Arduino/listings/805/Arduino-UNO-Case-Wall-Mount.html Arduino Home Device Wall Mount] | | [http://libre3d.com/category/657/Arduino/listings/805/Arduino-UNO-Case-Wall-Mount.html Arduino Home Device Wall Mount] | ||
|[ | | [https://www.ebay.com/itm/Acrylic-Case-Shell-Enclosure-Computer-Box-For-Arduino-UNO-R3-Transparent-Blue-/251721633268?pt=US_Computer_Cases&hash=item3a9bc74df4], Closest commercial equivalent is an enclosure - $4.50 | ||
|$2.91 | | $2.91 | ||
|- | |- | ||
|[[File:SplinedBottomBracketTool.JPG|200px]] | | [[File:SplinedBottomBracketTool.JPG|200px]] | ||
|[http://libre3d.com/category/569/Hand-Tools/listings/806/Splined-Bottom-Bracket-Bike-Tool.html Splined Bottom Bracket Tool] | | [http://libre3d.com/category/569/Hand-Tools/listings/806/Splined-Bottom-Bracket-Bike-Tool.html Splined Bottom Bracket Tool] | ||
|[ | | [https://www.amazon.com/Park-Tool-BBT-32C-bottom-bracket/dp/B001VS9ZBU Park Tool bike tools BBT-32C bottom bracket key] - $10.76 | ||
|$0.42 | | $0.42 | ||
|- | |- | ||
|[[File: | | [[File:TP pic.jpg|200px]] | ||
|[http://libre3d.com/category/602/Bathroom/listings/843/Toilet-Paper-Wall-Holder.html | | [http://libre3d.com/category/602/Bathroom/listings/843/Toilet-Paper-Wall-Holder.html Toilet Paper Holder] | ||
| | | Homedepot - $4.99 | ||
|$4.00 | | $4.00 | ||
|- | |- | ||
|[[File: | | [[File:Mens Restroom Sign.jpg|200px]] | ||
|[http://libre3d.com/category/569/Hand-Tools/listings/808/Mens-Bathroom-Sign.html Libre3D | | [http://libre3d.com/category/569/Hand-Tools/listings/808/Mens-Bathroom-Sign.html Libre3D Men's Restroom Sign] | ||
|[http://www.shapeways.com/model/1361599/bathroom-signs.html?li=search-results-1&materialId=6 Restroom Signs] - Pair=$364.00 | | [http://www.shapeways.com/model/1361599/bathroom-signs.html?li=search-results-1&materialId=6 Restroom Signs] - Pair=$364.00 | ||
|$177.00 | * ->Individual (1/2 Pair)=$182.00 | ||
| $177.00 | |||
|- | |- | ||
| [[ | | [[Image:Four point probe.jpg|200px]] | ||
| [http://libre3d.com/category/693/Engineering/listings/809/OS-Four-Point-Probe-head-holder.html Open-Source Four Point Probe (OS-4PP)] | | [http://libre3d.com/category/693/Engineering/listings/809/OS-Four-Point-Probe-head-holder.html Open-Source Four Point Probe (OS-4PP)] | ||
| [http://four-point-probes.com/multi-height-microposition-probe/], $7300 | | | ||
[http://four-point-probes.com/multi-height-microposition-probe/], $7300 | |||
| $1700 | | $1700 | ||
|- | |- | ||
| [[ | | [[Image:Tool for hunting.JPG|200px]] | ||
| [http://libre3d.com/category/569/Hand-Tools/listings/803/Gutting-Tool.html Open-Source Hunting Tool] | | [http://libre3d.com/category/569/Hand-Tools/listings/803/Gutting-Tool.html Open-Source Hunting Tool] | ||
| [ | | [https://www.amazon.com/Hunters-Specialties-Butt-Game-Dressing/dp/B002ECKYSA/ref=sr_1_1?ie=UTF8&qid=1418092862&sr=8-1&keywords=butt+out], $7.89 | ||
| $7.20 | | $7.20 | ||
|- | |- | ||
| [[ | | [[Image:Oven sheath.jpeg|200px]] | ||
| [http://libre3d.com/category/543/3D-Models/listings/811/Spatula-Sheath.html Spatula Sheath] | | [http://libre3d.com/category/543/3D-Models/listings/811/Spatula-Sheath.html Spatula Sheath] | ||
| [http://www.problemsolvers.com/gifts-under-$25/ceramic-spatula-and-utensil-holder-protects-stove-and-countertops.htm?aff=5512&gclid=CM6Aw4OYucICFQuNaQodaHQAlQ], $9.95 | | [http://www.problemsolvers.com/gifts-under-$25/ceramic-spatula-and-utensil-holder-protects-stove-and-countertops.htm?aff=5512&gclid=CM6Aw4OYucICFQuNaQodaHQAlQ], $9.95 | ||
Line 1,543: | Line 1,566: | ||
|- | |- | ||
|[[ | | [[Image:Pumpclip.JPG|200px]] | ||
| [http://libre3d.com/category/699/Health/listings/812/Animas-Insulin-Pump-Clip-Connector.html Insulin Pump Clip Connector] | | [http://libre3d.com/category/699/Health/listings/812/Animas-Insulin-Pump-Clip-Connector.html Insulin Pump Clip Connector] | ||
| [https://estore.animascorp.com/ProductDetail.aspx?groupid=179&topcategoryid=50&subcategoryid=140], $19.95 | | [http://web.archive.org/web/20151029232805/https://estore.animascorp.com/ProductDetail.aspx?groupid=179&topcategoryid=50&subcategoryid=140], $19.95 | ||
| $19.90 | | $19.90 | ||
|- | |- | ||
|[[ | | [[Image:Custom T-Shirt.jpeg|200px]] | ||
| [[3D Printed Custom T-Shirt]] | | [[3D Printed Custom T-Shirt]] | ||
| [http://www.vistaprint.com/custom-tshirts.aspx?couponAutoload=1&GP=12%2f9%2f2014+10%3a09%3a47+AM&GPS=3367795561&GNF=0],$5.99 to $24.99 | | [http://www.vistaprint.com/custom-tshirts.aspx?couponAutoload=1&GP=12%2f9%2f2014+10%3a09%3a47+AM&GPS=3367795561&GNF=0],$5.99 to $24.99 | ||
Line 1,555: | Line 1,578: | ||
|- | |- | ||
|[[ | | [[Image:Repetier z Probing.png|200px]] | ||
|[ | | [[MOST Delta Auto Bed Leveling|MOST DELTA Auto Bed Leveling]] | ||
|This Project does not save money but time. The average time it takes for someone to level their bed takes approximately 2 to 4 hours. | | This Project does not save money but time. The average time it takes for someone to level their bed takes approximately 2 to 4 hours. | ||
|After the bed levelling system is set up it takes approximately 5 minutes to have the bed levelled. | | After the bed levelling system is set up it takes approximately 5 minutes to have the bed levelled. | ||
|- | |- | ||
|[[ | | [[Image:MTUDivotRemovalTool.JPG|200px]] | ||
|[http://libre3d.com/category/556/SportsOutdoors/listings/823/Michigan-Tech-Divot-Removal-Tool.html Michigan Tech Divot Removal Tool] | | [http://libre3d.com/category/556/SportsOutdoors/listings/823/Michigan-Tech-Divot-Removal-Tool.html Michigan Tech Divot Removal Tool] | ||
|[ | | [https://www.amazon.com/Callaway-Golf-CG-Divot-Tool/dp/B00P847AWE/ref=zg_tr_tab_pd_mw_3 Callaway Divot Removal Tool] - I have found custom divot tools like this sell between $2.75 and $20.00 (depending on who the market is being sold to). | ||
|$2.63 to $19.87 | | $2.63 to $19.87 | ||
|- | |- | ||
|[[ | | [[Image:Batman's Equipment.JPG|200px]] | ||
| | | [http://libre3d.com/category/551/Other/listings/818/Batmans-Equipment.html]|Batman's Equipment] | ||
|[https://www.etsy.com/listing/188138916/the-dark-knight-rises-cowl-batman-mask?utm_source=google&utm_medium=product_listing_promoted&utm_campaign=geekery-high-other&ione_adtype=pla&ione_creative=48885380435&ione_product_id=188138916&ione_product_partition_id=81450894755&ione_store_code=&ione_device=c&ione_product_channel=online&ione_merchant_id=101361504&ione_product_country=US&ione_product_language=en&gclid=CLip-sOpucICFZaKaQod138Atg], 259.00 | | [https://www.etsy.com/listing/188138916/the-dark-knight-rises-cowl-batman-mask?utm_source=google&utm_medium=product_listing_promoted&utm_campaign=geekery-high-other&ione_adtype=pla&ione_creative=48885380435&ione_product_id=188138916&ione_product_partition_id=81450894755&ione_store_code=&ione_device=c&ione_product_channel=online&ione_merchant_id=101361504&ione_product_country=US&ione_product_language=en&gclid=CLip-sOpucICFZaKaQod138Atg], 259.00 | ||
[https://www.etsy.com/listing/171451373/3-wood-batman-begins-inspired-fan-art?utm_source=google&utm_medium=product_listing_promoted&utm_campaign=woodworking-accessories-belt-low&ione_adtype=pla&ione_creative=54906699875&ione_product_id=171451373&ione_product_partition_id=89325091715&ione_store_code=&ione_device=c&ione_product_channel=online&ione_merchant_id=101334335&ione_product_country=US&ione_product_language=en&gclid=CPPu38mpucICFREdaQodHocALg], 25.00 for each, 4 in total | [https://www.etsy.com/listing/171451373/3-wood-batman-begins-inspired-fan-art?utm_source=google&utm_medium=product_listing_promoted&utm_campaign=woodworking-accessories-belt-low&ione_adtype=pla&ione_creative=54906699875&ione_product_id=171451373&ione_product_partition_id=89325091715&ione_store_code=&ione_device=c&ione_product_channel=online&ione_merchant_id=101334335&ione_product_country=US&ione_product_language=en&gclid=CPPu38mpucICFREdaQodHocALg], 25.00 for each, 4 in total | ||
[ | [https://www.newegg.com/Product/Product.aspx?Item=9SIA1W20ZW3864&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Costume+Accessories-_-9SIA1W20ZW3864], 13.99 | ||
[http://www.officialjusticeleaguecostumes.com/batman-costumes/batman-belts/batman-the-dark-knight-adult-batman-utility-belt-officially-licensed?pla=1&gclid=CNiXg-mpucICFQmRaQodzXcA8Q], 11.99 | [http://web.archive.org/web/20170514125646/http://www.officialjusticeleaguecostumes.com:80/batman-costumes/batman-belts/batman-the-dark-knight-adult-batman-utility-belt-officially-licensed?pla=1&gclid=CNiXg-mpucICFQmRaQodzXcA8Q], 11.99 | ||
|$350.00 | | $350.00 | ||
|- | |- | ||
|[[ | | [[Image:IceScraper.jpg|200px]] | ||
| [http://libre3d.com/category/569/Hand-Tools/listings/819/Ice-Scraper.html Ice Scraper] | | [http://libre3d.com/category/569/Hand-Tools/listings/819/Ice-Scraper.html Ice Scraper] | ||
| [ | | [https://www.amazon.com/Hopkins-Subzero-16621-Crusher-Scraper/dp/B001DKO3X6/ref=sr_1_3?ie=UTF8&qid=1418172251&sr=8-3&keywords=ice+Scraper],$6.40 to $15.00 | ||
| $6.00 to 14.60 | | $6.00 to 14.60 | ||
|- | |- | ||
|[[ | | [[Image:3dsstand.jpg|200px]] | ||
| [http://libre3d.com/category/554/Electronics/listings/816/Nintendo-3DS-XL-Stand.html Nintendo 3DS XL Stand] | | [http://libre3d.com/category/554/Electronics/listings/816/Nintendo-3DS-XL-Stand.html Nintendo 3DS XL Stand] | ||
| [ | | [https://www.amazon.com/Nintendo-3DS-Stand/dp/B0072B39BM/ref=sr_1_1?ie=UTF8&qid=1418180400&sr=8-1&keywords=nintendo+3ds+stand&pebp=1418180405586 Commercial 3DS Stand] - $12.95 | ||
| $11.11 | | $11.11 | ||
|- | |- | ||
|[[ | | [[Image:Guitar Tone Knob.jpg|200px]] | ||
| [http://libre3d.com/category/702/Music/listings/825/Guitar-Tone-Knobs.html Guitar Tone Knobs] | | [http://libre3d.com/category/702/Music/listings/825/Guitar-Tone-Knobs.html Guitar Tone Knobs] | ||
| [ | | [https://www.amazon.com/WD-Music-KB130-Bell-Volume/dp/B0006ZSTI4/ref=sr_1_7?ie=UTF8&qid=1418182953&sr=8-7&keywords=guitar+knobs]$7.29 for tone knob set | ||
| $7.00 | | $7.00 | ||
|- | |- | ||
|[[ | | [[Image:WCL.jpg|200px]] | ||
| [http://libre3d.com/category/551/Other/listings/813/Winter-Carnival-Letter-Models.html Winter Carnival Letters and Punctuation] | | [http://libre3d.com/category/551/Other/listings/813/Winter-Carnival-Letter-Models.html Winter Carnival Letters and Punctuation] | ||
| [ | | [https://www.walmart.com/ip/Gulf-Wax-Household-Paraffin-Wax-16-oz/10420578] $11.60 for Paraffin Wax | ||
[ | [https://www.amazon.com/Crayola-64-Ct-Crayons-52-0064/dp/B00004YO15] $9.96 for 64 Pack Crayons | ||
| Estimated $100 savings over their predicted 10-15 year lifespan. | | Estimated $100 savings over their predicted 10-15 year lifespan. | ||
|- | |- | ||
|[[ | | [[Image:Arctic Cat Intake.JPG|200px]] | ||
| [http://libre3d.com/category/634/Automobiles/listings/815/Arctic-Cat-High-Flow-Intake.html 3D Printed Snomobile Air Intake] | | [http://libre3d.com/category/634/Automobiles/listings/815/Arctic-Cat-High-Flow-Intake.html 3D Printed Snomobile Air Intake] | ||
| [http://bikemanperformance.com/snowmobile/arctic-cat/m-600/bmp-big-flow-intake.html Commercial product],$69.99 | | [http://web.archive.org/web/20160829172642/http://bikemanperformance.com/snowmobile/arctic-cat/m-600/bmp-big-flow-intake.html Commercial product],$69.99 | ||
| $67 | | $67 | ||
|- | |- | ||
|[[ | | [[Image:PB 4.JPG|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/820/Powder-Baskets.html Powder Baskets] | | [http://libre3d.com/category/556/SportsOutdoors/listings/820/Powder-Baskets.html Powder Baskets] | ||
| [http://www.123mountain.com/deep-powder-basket-w-o-tip-leki?gclid=CjwKEAiA-5-kBRDylPG5096R8mASJABqEdm4VWy7ExY9hCOoXt5_PeaPIiXTPCTI0O77tZjXlZJWgxoC68Dw_wcB Commercial Baskets],$21.95 | | [http://www.123mountain.com/deep-powder-basket-w-o-tip-leki?gclid=CjwKEAiA-5-kBRDylPG5096R8mASJABqEdm4VWy7ExY9hCOoXt5_PeaPIiXTPCTI0O77tZjXlZJWgxoC68Dw_wcB Commercial Baskets],$21.95 | ||
Line 1,613: | Line 1,636: | ||
|- | |- | ||
|[[ | | [[Image:Vinyl Stand.PNG|200px]] | ||
| [http://libre3d.com/category/546/3D-Printers/listings/814/Vinyl-Record-Stand.html Individual Vinyl Record Stand] | | [http://web.archive.org/web/20170515003848/http://libre3d.com:80/category/546/3D-Printers/listings/814/Vinyl-Record-Stand.html Individual Vinyl Record Stand] | ||
| There are no/very few commercially equivalent products. Approximate cost for a product such as this would be $5 - $12. | | There are no/very few commercially equivalent products. Approximate cost for a product such as this would be $5 - $12. | ||
| $4.20 - $11.20 | | $4.20 - $11.20 | ||
|- | |- | ||
|[[ | | [[Image:Twfuller ginger grater.jpg|200px]] | ||
| [http://libre3d.com/category/689/Food-Related/listings/817/Ginger-Grater.html Ginger Grating Plate] | | [http://libre3d.com/category/689/Food-Related/listings/817/Ginger-Grater.html Ginger Grating Plate] | ||
| Various commercial offerings for as much as $12-15 | | Various commercial offerings for as much as $12-15 | ||
Line 1,625: | Line 1,648: | ||
|- | |- | ||
|[[File:IMG 20141210 160108.jpg|200px]] | | [[File:IMG 20141210 160108.jpg|200px]] | ||
| [http://libre3d.com/category/634/Automobiles/listings/821/Open-Source-ORV-Light.html Open-Source ORV Light] | | [http://libre3d.com/category/634/Automobiles/listings/821/Open-Source-ORV-Light.html Open-Source ORV Light] | ||
| Replacement of rotting case varies from $25-$100 depending on original lamp. | | Replacement of rotting case varies from $25-$100 depending on original lamp. | ||
Line 1,631: | Line 1,654: | ||
|- | |- | ||
|[[File:FullSizeRender (1).jpeg|200px]] | | [[File:FullSizeRender (1).jpeg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/826/Snowboard-binding-degree-plate.html Snowboard binding degree plate] | | [http://libre3d.com/category/556/SportsOutdoors/listings/826/Snowboard-binding-degree-plate.html Snowboard binding degree plate] | ||
| [http://www.fixmybinding.com/collections/frontpage Commercial product], $10-$20 | | [http://www.fixmybinding.com/collections/frontpage Commercial product], $10-$20 | ||
| ~$8.22-$18.22 | | ~$8.22-$18.22 | ||
|- | |- | ||
| [[ | | [[Image:lwilderbig$.jpg|200px]] | ||
| [http://libre3d.com/category/655/Plumbing/listings/824/Adapter-for-double-faucet.html Sink Adapter] | | [http://libre3d.com/category/655/Plumbing/listings/824/Adapter-for-double-faucet.html Sink Adapter] | ||
| N/A, no commercial equivalent available | | N/A, no commercial equivalent available | ||
| No burned or frozen hands | | No burned or frozen hands | ||
|- | |- | ||
| [[ | | [[Image:soccer shin guard.jpg|200px]] | ||
| [http://libre3d.com/category/556/SportsOutdoors/listings/828/Soccer-Shin-Guards.html Soccer Shin Guard] | | [http://libre3d.com/category/556/SportsOutdoors/listings/828/Soccer-Shin-Guards.html Soccer Shin Guard] | ||
| [http://www.adidas.com/us/predator-replique-3-stripes-shin-guards/F87280_360.html?cm_mmc=AdieSEM_Feeds-_-GoogleProductAds-_-NA-_-F87280&cm_mmca1=US&cm_mmca2=NA&kpid=F87280_L&cm_mmc=AdieSEM_google-_-soccer-_-mens%20accessories-_-&cm_mmca1=us&cm_mmca2=&prid=262&K_AFFCODE=7499&kpid=F87280_L], $19 | | [http://www.adidas.com/us/predator-replique-3-stripes-shin-guards/F87280_360.html?cm_mmc=AdieSEM_Feeds-_-GoogleProductAds-_-NA-_-F87280&cm_mmca1=US&cm_mmca2=NA&kpid=F87280_L&cm_mmc=AdieSEM_google-_-soccer-_-mens%20accessories-_-&cm_mmca1=us&cm_mmca2=&prid=262&K_AFFCODE=7499&kpid=F87280_L], $19 | ||
| $17.68 | | $17.68 | ||
|- | |- | ||
|[[Image: | | [[Image:Dock MotoG2.jpg|200px]] | ||
| [http://libre3d.com/category/601/Mobile-Phone/listings/827/Moto-G2-Dock-and-Cover.html Moto G2 Dock]. Made by [[ | | [http://libre3d.com/category/601/Mobile-Phone/listings/827/Moto-G2-Dock-and-Cover.html Moto G2 Dock]. Made by [[User:Ab91]] | ||
| No actual Commercial equivalent available. Closest is [ | | No actual Commercial equivalent available. Closest is [https://www.amazon.com/Motorola-generation-Protective-Charging-ONX3/dp/B00O08U904/ref=sr_1_8?ie=UTF8&qid=1418283834&sr=8-8&keywords=moto+g2+dock this], but only half of mine. $5-6. | ||
| ~$4-5. | | ~$4-5. | ||
|- | |- | ||
|[[Image: | | [[Image:Parametric Sax Mouthpiece.jpg|200px]] | ||
| [http://libre3d.com/category/702/Music/listings/829/Parametric-Saxophone-Mouthpiece.html] Parametric Saxophone Mouthpiece | | [http://libre3d.com/category/702/Music/listings/829/Parametric-Saxophone-Mouthpiece.html] Parametric Saxophone Mouthpiece | ||
| [http://www.wwbw.com/Yamaha-4C-Alto-Saxophone-Mouthpiece-461273-i1142760.wwbw?country=us¤cy=usd&source=TWWRWXGP&gclid=CJn997HNvcICFehDMgodzxEA8g&kwid=productads-plaid^85465146522-sku^461273@ADL4WWBW-adType^PLA-device^c-adid^48681270021], $35, There are a few .stl files for alto and tenor saxophone, but none with parametric code. This allows quick modification of dimensions for different saxophones, as well as for changing the tone the instrument produces. | | [http://www.wwbw.com/Yamaha-4C-Alto-Saxophone-Mouthpiece-461273-i1142760.wwbw?country=us¤cy=usd&source=TWWRWXGP&gclid=CJn997HNvcICFehDMgodzxEA8g&kwid=productads-plaid^85465146522-sku^461273@ADL4WWBW-adType^PLA-device^c-adid^48681270021], $35, There are a few .stl files for alto and tenor saxophone, but none with parametric code. This allows quick modification of dimensions for different saxophones, as well as for changing the tone the instrument produces. | ||
| $34 | | $34 | ||
|- | |- | ||
|[[Image:wimms.jpg|200px]] | | [[Image:wimms.jpg|200px]] | ||
| [http://libre3d.com/category/693/Engineering/listings/830/Custom-case-for-WCE-WIMMS-Project-Reciever-Pack.html Custom Case] | | [http://libre3d.com/category/693/Engineering/listings/830/Custom-case-for-WCE-WIMMS-Project-Reciever-Pack.html Custom Case] | ||
| A blank case like [http://www.polycase.com/dc-46f this] This has no holes drilled. Custom ordering requires time and money. | | A blank case like [http://www.polycase.com/dc-46f this] This has no holes drilled. Custom ordering requires time and money. | ||
| ~$5-$200+ | | ~$5-$200+ | ||
|- | |- | ||
|[[Image:Propeller.JPG|200px]] | | [[Image:Propeller.JPG|200px]] | ||
| [http://libre3d.com/category/567/RC/listings/831/Customizable-Propellers.html Customizable Propellers] | | [http://libre3d.com/category/567/RC/listings/831/Customizable-Propellers.html Customizable Propellers] | ||
| Normally costs $1 per [ | | Normally costs $1 per [https://www.amazon.com/Syma-Blades-Propellers-Spare-X5-02/dp/B00KBU64R2/ref=sr_1_1?ie=UTF8&qid=1418293598&sr=8-1&keywords=syma+propeller propeller]. | ||
| ~$0.95 | | ~$0.95 | ||
|- | |- | ||
| [[File: | | [[File:tattoo gun.jpg|200px]] | ||
| [http://libre3d.com/category/627/Art-Tools/listings/834/Tattoo-Gun.html] Tattoo Gun | | [http://libre3d.com/category/627/Art-Tools/listings/834/Tattoo-Gun.html] Tattoo Gun | ||
| Normally between 70-400 [http://www.tattoomachineequipment.com/custom-tattoo-machine-by-relentless-irons] | | Normally between 70-400 [http://web.archive.org/web/20150207015503/http://www.tattoomachineequipment.com:80/custom-tattoo-machine-by-relentless-irons] | ||
| ~$67-397 | | ~$67-397 | ||
|- | |- | ||
|[[File: | | [[File:IMG 2040.JPG|200px]] | ||
|[http://libre3d.com/category/624/Cups-and-Mugs/listings/832/wine-glass-hanger.html] wine glass hanger | | [http://libre3d.com/category/624/Cups-and-Mugs/listings/832/wine-glass-hanger.html] wine glass hanger | ||
| [http://www.potterybarn.com/products/1347277/?catalogId=92&sku=1347277&bnrid=3318529&cm_ven=Google_PLA&cm_cat=Decor_&_Pillows&cm_pla=Shelves_&_Ledges&cm_ite=Holman_Entertaining_Shelf%2C_Wineglass%2C_Modern_White&srccode=cii_17588969&cpncode=38-10644154-2],$100-$189 | | [http://www.potterybarn.com/products/1347277/?catalogId=92&sku=1347277&bnrid=3318529&cm_ven=Google_PLA&cm_cat=Decor_&_Pillows&cm_pla=Shelves_&_Ledges&cm_ite=Holman_Entertaining_Shelf%2C_Wineglass%2C_Modern_White&srccode=cii_17588969&cpncode=38-10644154-2],$100-$189 | ||
|$94.30-$183.3 | | $94.30-$183.3 | ||
|- | |- | ||
|[[File:Aircraftframe.png|200px]] | | [[File:Aircraftframe.png|200px]] | ||
|[http://libre3d.com/category/593/Mechanical-Toys/listings/833/3D-printable-aircraft-model.html] Aircraft model frame | | [http://libre3d.com/category/593/Mechanical-Toys/listings/833/3D-printable-aircraft-model.html] Aircraft model frame | ||
|[ | | [https://www.amazon.com/s/ref=nb_sb_noss_2?url=node%3D166508011&field-keywords=Quadcopter+Aircraft&rh=n%3A165793011%2Cn%3A166508011%2Ck%3AQuadcopter+Aircraft],Commercial equivalence depends on size and should be more than $10 | ||
|~$7 | | ~$7 | ||
|- | |- | ||
|[[File:crochet.png|200px]] | | [[File:crochet.png|200px]] | ||
|[http://libre3d.com/category/627/Art-Tools/listings/835/Crochet-Hook-Holder-for-Single-Handed-Crocheting.html Crochet Hook Holder for Single-Handed Crocheting] | | [http://libre3d.com/category/627/Art-Tools/listings/835/Crochet-Hook-Holder-for-Single-Handed-Crocheting.html Crochet Hook Holder for Single-Handed Crocheting] | ||
|No commercial version currently exists but generic [ | | No commercial version currently exists but generic [https://www.amazon.com/Universal-Holder-Engraver-Jewelry-Repair/dp/B00KNCKD48 work holders] cost about $20 on amazon. | ||
|$7 | | $7 | ||
|- | |- | ||
|[[File:TabletStand.jpg|200px]] | | [[File:TabletStand.jpg|200px]] | ||
|[http://libre3d.com/category/617/Tablet/listings/836/Adjustable-Tablet-Stand-for-use-with-Bluetoooth-Keyboard.html Tablet Stand and bluetooth keyboard] | | [http://libre3d.com/category/617/Tablet/listings/836/Adjustable-Tablet-Stand-for-use-with-Bluetoooth-Keyboard.html Tablet Stand and bluetooth keyboard] | ||
|Many commercial versions exists [http://www.dx.com/p/detachable-bluetooth-wireless-keyboard-stand-cover-case-for-sony-xperia-z2-tablet-black-341724?tc=USD&gclid=CO6Ur5KNvsICFc87Mgodr2YAlA#.VImdMjHF82Y like this one], but tend to be design for a specific tablet. | | Many commercial versions exists [http://www.dx.com/p/detachable-bluetooth-wireless-keyboard-stand-cover-case-for-sony-xperia-z2-tablet-black-341724?tc=USD&gclid=CO6Ur5KNvsICFc87Mgodr2YAlA#.VImdMjHF82Y like this one], but tend to be design for a specific tablet. | ||
|$19.34-$59.34 | | $19.34-$59.34 | ||
|- | |- | ||
|[[File:ChristmasTreeStand.JPG|200px]] | | [[File:ChristmasTreeStand.JPG|200px]] | ||
|[http://libre3d.com/category/673/Ornaments/listings/837/Christmas-Tree-Stand.html Christmas Tree Stand] | | [http://libre3d.com/category/673/Ornaments/listings/837/Christmas-Tree-Stand.html Christmas Tree Stand] | ||
| [http://www.wayfair.com/Jack-Post-Medium-Steel-Stand-5164-L1013-K~JKP1164.html?refid=GX50899259940-JKP1164&device=c&ptid=83323231159&gclid=COvS-oyPvsICFQULMgod814ABQ], $22.99 | | [http://www.wayfair.com/Jack-Post-Medium-Steel-Stand-5164-L1013-K~JKP1164.html?refid=GX50899259940-JKP1164&device=c&ptid=83323231159&gclid=COvS-oyPvsICFQULMgod814ABQ], $22.99 | ||
| $19.08 (base is made from a recycled shipping pallet) | | $19.08 (base is made from a recycled shipping pallet) | ||
|- | |- | ||
|[[File:Printiverse.png|200px]] | | [[File:Printiverse.png|200px]] | ||
|[https://github.com/c0nrad/printiverse Printiverse] | | [https://github.com/c0nrad/printiverse Printiverse] | ||
| [http://www.shapeways.com/], Expen$ive | | [http://www.shapeways.com/], Expen$ive | ||
| $Cheaper (The cost of a printer?) | | $Cheaper (The cost of a printer?) | ||
|- | |- | ||
|[[File: | | [[File:tiered stand.jpg|200px]] | ||
|[http://libre3d.com/category/551/Other/listings/839/Tiered-Jewelry-Stand.html Tiered Jewelry Stand] | | [http://libre3d.com/category/551/Other/listings/839/Tiered-Jewelry-Stand.html Tiered Jewelry Stand] | ||
|[http://http://www.urbanoutfitters.com/urban/catalog/productdetail.jsp?id=32163131&parentid=SEARCH+RESULTS | | [http://web.archive.org/web/20141217105744/http://www.urbanoutfitters.com:80/urban/catalog/productdetail.jsp?id=32163131&parentid=SEARCH+RESULTS] $20 | ||
|$18.15 | | $18.15 | ||
|- | |- | ||
|[[File:Bread Slicing Guide.jpg|200px]] | | [[File:Bread Slicing Guide.jpg|200px]] | ||
|[http://libre3d.com/category/689/Food-Related/listings/838/Bread-Slicing-Guide.html Bread Slicing Guide] | | [http://libre3d.com/category/689/Food-Related/listings/838/Bread-Slicing-Guide.html Bread Slicing Guide] | ||
| [http://www.breadpal.net/], $57.99 | | [http://www.breadpal.net/], $57.99 | ||
| $56.56 (base is made from a scrap hardwood board) | | $56.56 (base is made from a scrap hardwood board) | ||
|- | |- | ||
|[[File: | | [[File:MTU DESK1.png|200px]] | ||
|[http://libre3d.com/category/697/OfficeWork/listings/840/MTU-Desk-Accessory.html] MTU Desk Accessory | | [http://libre3d.com/category/697/OfficeWork/listings/840/MTU-Desk-Accessory.html] MTU Desk Accessory | ||
|[http://www.lutherbookshop.com/shop_product_detail.asp?catalog_group_id=MQ&catalog_group_name=R2VuZXJhbCBNZXJjaGFuZGlzZQ&catalog_id=258&catalog_name=R2lmdHM&pf_id=897&product_name=THV0aGVyIENvbGxlZ2UgUGFwZXJ3ZWlnaHQ&type=1&target=shop_product_list.asp] $23.99 | | [http://www.lutherbookshop.com/shop_product_detail.asp?catalog_group_id=MQ&catalog_group_name=R2VuZXJhbCBNZXJjaGFuZGlzZQ&catalog_id=258&catalog_name=R2lmdHM&pf_id=897&product_name=THV0aGVyIENvbGxlZ2UgUGFwZXJ3ZWlnaHQ&type=1&target=shop_product_list.asp] $23.99 | ||
|$23.6 | | $23.6 | ||
|- | |- | ||
|[[File: | | [[File:Prop front shane.jpg|200px]] | ||
|[http://libre3d.com/category/709/Boating/listings/848/Trolling-Motor-Prop.html] Trolling Motor Replacement Prop | | [http://libre3d.com/category/709/Boating/listings/848/Trolling-Motor-Prop.html] Trolling Motor Replacement Prop | ||
|Minnkota replacement prop[http://www.minnkotamotors.com/Products/MKP-33-WEEDLESS-WEDGE-2-PROP/] $39.99 | | Minnkota replacement prop[http://www.minnkotamotors.com/Products/MKP-33-WEEDLESS-WEDGE-2-PROP/] $39.99 | ||
|$32.49 | | $32.49 | ||
|- | |- | ||
|[[File:Yoke Cover.jpg|200px]] | | [[File:Yoke Cover.jpg|200px]] | ||
|[http://libre3d.com/category/649/Air-Planes/listings/841/Yoke-Cover.html] Airplane Yoke Cover | | [http://libre3d.com/category/649/Air-Planes/listings/841/Yoke-Cover.html] Airplane Yoke Cover | ||
|Full Yoke $150. | | Full Yoke $150. | ||
|Cover costs $0.33 | | Cover costs $0.33 | ||
|- | |- | ||
|[[File:Physical-Photoresistor-Regulating-Device.JPG|200px]] | | [[File:Physical-Photoresistor-Regulating-Device.JPG|200px]] | ||
|[http://libre3d.com/category/643/Lighting/listings/842/Physical-Photoresistor-Regulating-Device.html Physical Photoresistor Regulating Device] | | [http://libre3d.com/category/643/Lighting/listings/842/Physical-Photoresistor-Regulating-Device.html Physical Photoresistor Regulating Device] | ||
|New Light: $80+. | | New Light: $80+. | ||
|Plastic Cost: <$0.75 | | Plastic Cost: <$0.75 | ||
|- | |- | ||
|[[File:Fairlead1s.PNG|200px]] | | [[File:Fairlead1s.PNG|200px]] | ||
|[https://libre3d.com/index.php?a=4&b=1] Hawse fairlead for snowboard winch | | [https://libre3d.com/index.php?a=4&b=1] Hawse fairlead for snowboard winch | ||
|Fairlead $1.80 | | Fairlead $1.80 | ||
|Cover costs $0.86 | | Cover costs $0.86 | ||
|- | |- | ||
|[[File:Heliostat Pankaj.jpg|200px]] | | [[File:Heliostat Pankaj.jpg|200px]] | ||
|[http://libre3d.com/category/657/Arduino/listings/846/Heliostat.html Heliostat for tracking sun!] | | [http://libre3d.com/category/657/Arduino/listings/846/Heliostat.html Heliostat for tracking sun!] | ||
|Heliostat $60-$80 | | Heliostat $60-$80 | ||
|$30-$50 | | $30-$50 | ||
| | | | ||
|- | |- | ||
|} | |} | ||
{{Page data}}]]] |
Latest revision as of 19:01, 16 April 2024
The RepRap motto is "wealth without money" - for this assignment you are to create wealth by making an open source design that has value to you. It must be 3D printable on your MOST Delta and cost less than a commercial equivalent (if such a thing exists).
Assignment[edit | edit source]
- Design something of "high value" that you can 3D print on your MOST Delta
- Make sure someone else has not already done it - search http://www.yeggi.com/ and http://web.archive.org/web/20191229012720/http://www.yobi3d.com/
- Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender)
- Upload your design under an OS license to https://www.myminifactory.com/ or https://libre3d.com/ - include: Source files, STLs, a picture, and a brief description including costs and $ savings.
- Add picture, link to your MyMiniFactory or Libre3D page with name, commercial equivalent link+cost, and economic savings to table below (see example).
- Print component and bring to class (online students - post a link to a short Youtube video)
Grading[edit | edit source]
- 30% Print quality
- 20% Documentation
- 50% Design (design for printing, aesthetics and function)
Automatic reductions:
- 50% no source or the use of non-OS software
- 10% per day for late
Table of Value[edit | edit source]
2019[edit | edit source]
Digital Photo | Free Design/Link to YouMagine | Commercial equivalent link/Cost US$ | Approximate Savings in US$ | |
---|---|---|---|---|
Parametric Dice Box | Dice boxes vary in price by a large margin. The printed box was designed after a standard box [1] that costs $9.99. The printed box costs only $0.92 to print, having a saving percentile of 90.8%. | |||
Ice Fishing Drink Holder | No commercial equivalent (perhaps a high quality thermos for $48) | This ice fishing drink holder features telescoping cylinders that immerse drinks within water through a hole in the ice, keeping them cold but preventing them from freezing while ice fishing. The top of the holder can be held against the ice via a weight, screws, or bolts. Cost: $12.12, Cost savings: $35.88 (versus the thermos). I have been offered $30 for this device, or a profit of $17.88 per device. | ||
Seal Puller | Motion Pro Seal Puller $45.99 | Printed pieces cost: $1.32, Cost savings: $44.67. This cost is for one handle and 3 different sized heads. Many different size and shape heads could be printed for this handle for different applications. A future project could make the heads fully parametric. | ||
Open Source Camera Slider | Motorized Camera Slider $400.00 higher end camera slider $1000.00 | Total Cost: ~$60.00, Cost savings: $340.00. The cost savings for this is huge compared to buying a cheap one on Amazon. There are other versions of sliders that cost well over $1000 on there as well. Here is the link to my page to talk more about the slider Open Source Camera Slider. | ||
Cactus Taco Holder | Value: $8.49 for 4 | This object was designed to prop up your hard or soft shell taco while making or serving. The fun cactus shape provides interest and whimsy. A similar taco holder can be bought for about $9 for a pack of 4 on amazon, but this version can be printed for around $0.25 worth of filament for a cost savings of about 89%. youtube link | ||
Switch Stand | Official Switch Stand | This stand, used to support a Nintendo Switch such that the USB-C charging port is easily accessible, would cost around $1.82 in plastic to print, while commercial equivalents cost $13 or more, saving 86% of the cost. | ||
Parametric Sprue | $15 10mm Sprue Form | This parometric sprue allows for users to print a sprue in usage with match plate casting. A single sprue, on average, costs around $15, but this print will cost only around $0.16. This is a cost savings of 94%! YouTube Link - Parometric Sprue | ||
Parametric Metric Allen Wrench | $5.28 6mm Allen Wrench Key | Even printing at 85% infill, it takes less than an hour and costs less than $0.20. A single replacement could be around $5.00 and require you to run to a store or order online. A complete set can be around $15. This would work great in small torque applications and would be a 96% cost savings if small torque is all you need, but the biggest savings is the time. YouTube Link - Parametric Metric Allen Wrench | ||
Dual Flash Camera Mount | $135.99 Camera Flash Mount | This flash mount allows the user to mount two DSLR camera flashes to the 1/4-20 thread screws found on most cameras. The cost to print this was around 3$ plus a 0.25$ bolt that most people would have laying around the house. Also comes with a stand to hold the camera. 98% Savings. Youtube Link | ||
2013 Silverado Dash Mount for Bully Dog Tuner | The Commercial equivalent costs $85 plus $20.50 for paint | The cost of this print at 25% infill and 5% supports is about $0.20 plus about $0.10 for the mounting tape. A commercial equivalent is $85 plus $20.50 for the interior paint color. This is a cost savings of $105.20 or 99.7%. YouTube Link | ||
Fork Alignment Tool | $34.99 Fork Alignment Tool | This Fork Alignment Tool only costs $2.04 to print at 25% infill with an additional $0.91 in hardware required for a total cost of $2.95. This saves $32.04 or 92% compared to the commercial equivalent. | ||
Cryogenic Dewar Flask with clamping rod | $350 1900ml Commercial Equivalent for Cryogenic Dewar Flask | This Cryogenic Dewar Flask comes with adjustable lids for various sizes of round bottom flasks and a retort stand for clamping other glassware. Overall cost savings sums up to ~90% for the entire package. Contributors - Abhijeet Patil, Saurabh Karanke, Shubham Jain | ||
TI Inspire Calculator Cover | $10.95 Cover | This cover only costs $1.07 to print at 35% infill (63 grams). This saves $9.88 or 90.2% compared to the commercial equivalent. | ||
Parametric 12 Gauge Shotgun Phone Mount | $32.99 Phone Mount | This part only costs $0.72 to print at 50% infill (36 grams). This equates to $32.27 in savings or 97.8% savings on the commercial equivalent. | ||
Snowmobile Pre Filter Cage trfranck | $84.99 CAD = $64.82 USD | It costs approximately $0.56 to print the base of the air filter cage and a metal clothes hanger costs $0.90: Total savings of $63.36 (98%!). | ||
Skate Sharpener Guide | $40 Skate Sharpener, | It costs $10.00 total for sharpener stone, screw, and guide print. The commercial equivalent is $40, costing 1/4 the retail price and $30 cheaper. Youtube Link | ||
Wine Bottle Chandelier | $820 Commercial Wine Bottle Chandelier | It costs $53.16 to create the entire chandelier. That is a savings of $766.84 or about 94% with additional materials remaining to make another chandelier. | ||
Centre Pin Reel with Ceramic Bearings | $199.99 Reel | This part only costs $1.80 to print at 30% infill and $3.50 for the bearing. Would not trust the reel for steelhead, but would work for smaller trout. Approximate savings if it were strong enough would be 97% | ||
Coffee Grinder Conversion Kit | [2], $139 Amazon Best Selling Electric Burr Coffee Grinder | Any planetary motor (the best being 100 RPM) with power supply will work. The printed components only takes 76g of filament to print. My cost of filament was $1.52, so $137.50 savings (99%). If you don't have your own motor and power supply, you can pick your choice from amazon and will run around $25 in total. This reduces the cost savings to $114 (82%). YouTube link: 9tXILSS19Ps | ||
Motorcycle cup holder | [3], $33 Revzilla cup holder | It costs near $1.00 to print. That gives a cost savings near $32. YouTube link: --gQF5NBX80 | ||
Bag Caps | Retail Price: $13 | The cost to print this is $3.00 so the savings is $11.00 or 76% Youtube | ||
Ski Waxing System | [4], $120 | $115, Essay on savings | ||
Parametric Piping Tips | [5], $33 | At about $1.30 to print all seven tips: You save $31.70 (%96) for a basic set. | ||
Cable Management Box | [6], $23.97 | It costs approximately $2.63 to print the cable management box: You save $21.34 (%89). Youtube Link: [7] | ||
Deadlift Jack | [8], $42 | Takes about 500 grams to print all 5 components, $10 print cost: Saving $32 and 7 lbs of weight compared to metal version. | ||
Adjustable Ream | [9], 20$ | It costs in total about 1 dollar for the print hardware and glue so we are saving 19$ | ||
Customizable Obento Box | [10], $24.95 | It costs in total about $1.08 dollars and takes 54 grams of filament for 2 boxes, lids, and separator. Savings: $23.87, 96% savings. Youtube Link | ||
Pineapple Self-Watering Planter | [11], $18.99 | It costs in total about $1.22 dollars and takes 61 grams of filament for 2 pieces of the planter. And this is comparing it with a planter that isn't a self-watering one. Savings: $17.77, 93.58% savings | ||
PMAG Loader | [12], $26.95 | Total cost is ~85 cents, with ~58 cents of plastic being used at the 30% infill I printed at, I had a clevis pin laying around but am assuming a 27 cent cost for a clevis pin if sourced from McMaster Carr as a worst case scenario, for a total savings of ~$26.10 over the closest commercial equivalent. Video for being an online student here | ||
Dominion base card compact holder | [13], $19.99 full price, $12.99 on sale | The total cost for the two pieces is around $1.94 for 97g of filament. The base card set from Dominion (with cards included, I had my own) is priced around $19.99 or $12.99 normally. This is a savings of 90% full price ($18.05), and 85% ($11.05) on sale. | ||
Nordic ski binding jig (self-clamping) | [14], Not sold commercially, but you can find one used for $45-60 if you're lucky. | Expect the print to cost $2.00 at 20% infill. That gives a cost savings of 96% over buying an old used jig, and you save the time of hunting it down on random buy/sell pages.
Using a jig to mount your bindings is extremely helpful for proper hole placement. Without the use of a jig, it takes much longer to correctly place the mounting holes. The jig sets perfect alignment every time and greatly speeds up the process. There is currently one OS binding jig, and it does not have a clamping mechanism and does not align itself to the ski. See here. The new design both clamps and aligns. To properly use, print the base plate (two separate pieces that connect) then print two clamps and connect them to the base plate's extruded tabs. See the myminifactory link for more details. | ||
T spine Muscle Roller + Wall Mount | [15], 40$ | It costs around $16.20 to print for a savings of $23.80, that is a savings of 83.25%. The wall mount costs around $25 but only $12.80 to print + the few cents for mounting bolts. T Spine Muscle Roller Youtube Video | ||
On Camera Storage | [16], $12 | It costs $2 to print for a savings of $10.00, that is a savings of 83.33%. Another advantage is the ability to attach this compartment to the camera. no need to carry another bag or stuff your pockets.On Camera Storage Compartment Video | ||
JPlug | A typical plug can run about $10. | This design costs about $0.30 with 5 wall linings and a 25% infill. | ||
Since this is a custom design made by our team there are no commercial equivalents. Though material would cost around $118 plus machine time and tooling would price this probably around $250+ | This design costs about $0.29 for the brace, $0.50 for the main body, and $0.19 for the pistons. So using that the whole caliper plus some bolts puts the total cost of the prototype at about $1.50. Resulting in a $248.50 savings (99.4%) per iteration. Project Video | |||
Silverware Holder | [17] A typical silverware holder to hook onto a dish drainer can cost about $9. | This design costs about $1.50 and it is wider to accommodate a bigger dish rack. youtube video: [18] | ||
[19] | https://web.archive.org/web/20210302030002/https://www.power-systems.com/shop/product/slidez, $31.04 | The commercial equivalent for this product is linked above. It costs $31.04 for a set. This cost to print a set of these exercise carpet sliders is approximately $2.82, assuming a price of $20 per kg of PLA. This is a savings of $28.22 per set or a 91% cost reduction. A video of this product can be found here: https://www.youtube.com/watch?v=UHaDGk-ZslU | ||
Cast Iron Pan Mold | No commercial equivalent | This consumed 115 grams in filament and can be printed at 25%, but with editing the models can change, wood glue $2, need access to foundry for: Green Sand, Gray Iron (for pouring cast iron pan), Check out more about the pan mold here | ||
Hub Lock/Unlock Tool | No commercial equivalent | This design cost $0.55 in filament printed at 50% infill Hub Lock/Unlock Tool Youtube Video | ||
Drinking Shotgun Shell | [20] The Shotgun Shell here is sold for a retail value of $29.99 | The cost to print this Shotgun Shell is $1.63. Assuming a value of $29.99 for commercial value, there will be a cost savings of 94%. | ||
Tank mount phone holder base | [21], $31.99 | $0.30 in PLA and electricity costs 99% cost savings | ||
Dirt Bike Phone Mount | [22], ~$18 | The design requires external hardware (8 m3x20 nuts and bolts). The design comes around to $5, which is about ~$13 in savings. Showcase Video | ||
Monogram Jewelry Holder | [23], ~$149 for something 3x the size, or roughly $50 for something of a similar size | Pottery Barn sells a similar product 3x the size for $149. Assuming Pottery Barn would charge 3x less for a product 1/3 of the size it would cost approximately $50. Since this model costs $2 to print, you save $48 (96% cost savings). Link to Youtube Video | ||
Consistent Golf Tees] | These tees cost $14 | You can buy consistent tees off of any website but none of them are perfect for your clubs. It costs less than 50 cents to print these custom tees so you can save up to 12 dollars on not buying them off line. | ||
Llama Samsung Galaxy S8 Case | This custom case costs $24 on Etsy | This phone case costs roughly $0.60 using standard PLA or $0.75 using standard NinjaFlex. This print saves you approximately 95%. | ||
Tree Stand Bow Hook | Similar products cost about $20 | This hook costs about $0.72 to print and also will require two 1/4" bolts and 2 nuts which is approximately $2 for all four items. This hook can be made custom to fit your tree stand. | ||
Bearing Housing Press | This was quoted to me at $1500 to be printed in aluminum | My cost to make these was ~200g of filament for a total of $5.00 using ABS | ||
Hat display rack Video of Big Money Project final product | Display/Storage racking for hats can cost anywhere from $20-$80, depending on size and material | My cost to make these was $4.14, based on 206g of PLA used to make it. This corresponds to a 79.4%-94.85% savings | ||
Gun holster | The commercial equivalent, costs ~$37.00. | The cost to print my holster is ~$1.74 and requires 2 printed parts, 2 bolts, and 2 nuts. My design is a 95.3% cost reduction and has decent strength being printed with PETg | ||
Tool-free Table Leveler | The commercial equivalent, costs $40.80 for 4 of them. | The cost to print enough parts for a four legged table is ~$1.06 (assuming two shims per leg). My design is a 97.4% cost reduction over the commercial equivalent. Link to YouTube video | ||
Athena Frame Cinch | The commercial equivalent, costs ~$8.70. | The cost to print is ~$0.65 and requires 6 printed parts, para-cord, and a turnbuckle. There is a 92.5% cost reduction. | ||
Cubicle Hook | The commercial equivalent, costs ~$6.99. | The cost to print is ~$0.80 and has a cost savings of 88% Youtube Link | ||
Golf divot tool with ball marker and hat clip | The commercial equivalent, costs ~$14.99. | The cost to print is ~$0.06 with 2 parts. There is a 99% cost reduction. | ||
Woodworkers Detail Mallet | The commercial equivalent, costs ~$15-$50. | The cost to print is ~$1.32 and it's customizable. There is a 92%-99% cost reduction. | ||
Military Challenge Coin Holder | The commercial equivalent costs up to $140. | The cost to print this part is ~$1.25, which is over a 99% cost savings | ||
[24] | The commercial equivalent, costs ~$55. | The cost to print is ~$5. There is a 65% cost reduction. (Note, do not print in ABS, ABS is toxic and not food safe.) | ||
Sony NEX/a5000/a6000 Hand Shroud | Commercial equivalent, the Peak Design Clutch, costs about ~$40.. The material cost is about $2 between plastic and accessories, making this about a 95% cost savings. | |||
Fire Extinguisher Mount | The commercial equivalent, costs ~$30.99. | The cost to print both parts is ~$3.45, which is a 89% cost reduction. The personal value I get from this comes from my house passing its insurance inspection. Youtube Link | ||
Customizable Bike Chain Tensioner | The commercial equivalent, costs ~$38.60. | The cost to print part is ~$0.60, which is a 98.4% cost reduction. | ||
DnD Floor and Wall Grid | The commercial equivalent, costs ~$20 to 30. | The cost to print part is ~$0.20 per tile, which is a 87% cost reduction. | ||
Xiegu x108g Ham Radio Mount[25] | No commercial equivalent. Commercial equivalent for other radio models, ~$30.00. | The cost to print part is ~$0.45, which is a savings of 98.5% from commercial radio mounts. | ||
Door Sign with Braille | The commercial equivalent, costs ~$17.77. | The cost to print part is ~$1.16, which is a 93.5% cost reduction. | ||
Ball joint for MOST Delta | No equivalent that I have seen | This is me [26]. Total cost for one is $0.02 so to put one on every joint is not even a quarter. I chose this because I have been having troubles with my rods falling off during prints all semester. I believe there are better ways to make this but i just wanted one I could glue right onto the part for simplicity sake. Video for being an online student here | ||
3-D Printable Speaker Demo; Part Files | Desktop speakers cost upwards of $20 | The cost to print and build is ~$1.25/speaker, about 5% of the cost of a similar speaker. This has more educational value as a speaker demo, but also offers usable audio quality for someone on a budget. (Video on project page) | ||
Part Files | Non-Custom Car Phone mounts $11 and up | Video Link] ] | ||
Flash Holder Mount for Softbox | [27], Commercial Equivalent to my design. However my current softbox can not support this adapter, so i would need to buy a whole new set to use a flash. [28], Commercial version of softbox flash set approx $170. | This design allows me to use my current flash with my softboxes eliminating the need to buy a new set, found here [29]. My current solution is to have another tripod with the flash pointing into the soft box. This design allows the flash and the softbox to be mounted on the same tripod, allowing me to set up more softboxes, and reduces the footprint they take up.
| Youtube Link ] Printed in PLA, totalling to a cost of $0.50 dollars, with a weight of 25g. Commercial equivalents cost upwards of $150, leading to a cost reduction of 99.7% and a savings of $150. | ||
Bottle Holder | There is no commercial equivalent that I found, when researching I mostly found mounting types of holders, nothing freestanding and customizable. | Youtube Video] | ||
Shower Caddy |
[30], Commercial equivalent on Amazon $19.13 |
here]. | ||
4-way Interlocking Tube Rack | Commercial equivalents can run $10 to $15 each (based on Fisher Scientific) | Designed in OpenSCAD, this print costs about $5 total in PLA and fits together without any part cleaning | ||
stonehenge | N/A (New Technology) | N/A. New Tech. for usage on planetary bodies with a powdery top layer. Intends to be used to make small tools and structures on these planetary bodies using the natural materials present. | ||
[31] | New Technology -- Commercial Snow Ball Maker $10 - $15, Haven't seen a Snow Man Maker. | 3D printed Snow Man Maker. All parametric, cost dependent on the size of the Snow Men, expected cost <$7 | ||
Bullseye Cup(Golf) | Eyeline Golf Bullseye Cup Putting Aid, $15 | Costed me just over $3 to print, which is a cost savings of close to 80% Link to Youtube video | ||
Disc Golf Midrange Mini | Similar Mini Disc, $7,99 | Cost to print is $0.68, making for a savings of 91.5% | ||
Arctic Warriors Batallion Logo | Custom Challenge Coins (in metal) $10 | Cost to print is $0.50, True Value: Priceless, or like $10, which is what a metal coin in this shape would cost, so 95% savings | ||
Locking Ammunition Container (100x9mm Luger) | The commercial equivalent costs ~$13.15 for the box plus a $3.17 MasterLock | The cost to print my container is ~$4.28 and requires a MasterLock for $3.17. My design is a 43% cost reduction and has better usability for its sliding action that allows the user to dispense small amounts of rounds quickly. | ||
Customizable Labelled Drawer or Cabinet Knobs (My Mini Factory)See on Thingiverse too | Drawer Pull with index card label - $10 | Cost to print is $0.24 + Command Strip($0.50), True Value: ~$8, so 91% savings per item. I printed 5, for 5 separate cabinets. Link to YouTube Video | ||
[32] | $40 for whole set including 6 mallets and other stuff (on sale), $50 regular price | Cost to print is $4.44 which could be a bit pricey if you need six ($26.64 for six mallets ==> cost savings $13.36 (if set on sale) or $23.36 savings regular price. ), but beats having to buy a whole new set to replace a mallet or two. (Equivalent (regular price) $50.00/set containing six mallets and balls). For rod, use an old broomstick and cut into ~24 inch sections. Could be modified to use less plastic by optimizing infill parameters and their effects on mechanical properties. Croquet is a big summertime hobby of mine and the mallet did not break when I hit an actual croquet ball with it so I might try it out in play! video. | ||
[33] | Leica Lens Carrier M Base price $245 On sale for $189 | Cost to print is $0.35 + 1/4-20 1/4" bolt($0.30) total = $0.60 Closest comparison found was selling for $189 and did not include a place for lense caps. Link to YouTube Video | ||
[34] | Twilight Imperium Parts holder for sale on Etsy price $90 | Cost to print is $36.66 to make all the holders for all the parts. | ||
Adjustable Pleco Cave | Pleco caves can be anywhere from $5 to $20+ | Plecos are extemely picky about cave size, and most require caves fitted to their bodies for the purposes of being able to mate correctly. Having a one size fits all type solution helps with this. Cost to print is ten cents or less, as the printed objects are extremely thin/lightweight. This means that you are saving on nearly the entire cost of whatever you would normally spend on a commercial cave. Savings are 98-99% and the printed product offers more options to the user. Student: Leighton Gaines, Youtube Video | ||
Point of Sale (POS) System | Square POS for ~$530 | Full cost of system: $130. (For a full breakdown of costs see My Mini Factory). [35], Youtube Video | ||
Cat Fountain | Stainless steel fountain $35 | Full cost of fountain $8.80 ($6 - water pump, $2.80 - filament, $0.00 - bowl ) Savings of $26.2 or 75% [36], Youtube video showing fountain running | ||
Snow Goggle Frame | Oakley Fall Line XL Goggles $190 | Cost estimate: $2.04 for frame (based on 102g of PLA at $20/kg), $8.97 for strap, and lens made from scrap plastic from tool packaging. Total of $11.01. 94.2% cost savings. | ||
Automatic Coil Winder for Linear Generator | Bi-directional Coil Winder, $249.00 | Cost estimate: 235.5cm^3, 1.24g/cm^3, $20 per kg, comes to $5.84. 2 M3x8 screws, NEMA17 motor, L298 stepper driver board, and Arduino Uno R3 for a total of $40.84. cost savings of 83.6%. |
2018[edit | edit source]
Digital Photo | Free Design/Link to YouMagine | Commercial equivalent link/Cost US$ | Approximate Savings in US$ | |
---|---|---|---|---|
Ski Waxing System | [37], $120 | $115, Essay on savings | ||
Oculus fan | [38],<<Closest existing fan system but requires modification to the headset. No commercial equivalent | *Access to a soldering iron
| ||
Sony Battery Holder
(Future Charging Station) |
[39], OEM Commercial Equivalent, $50 | $44
(88%) | ||
AthenaII dial gauge holder | No Commercial Equivalent | No purchase savings, but it can save time when troubleshooting bed leveling issues. | ||
10 Round AR15 Magazine Loader | [40] Commercial Equivalent, ~$133 | ~132 Cost savings plus smaller range friendly size | ||
[41] | [42], Commercial Equivalent $5-400 (Scale and Paint Quality Based) | ~$2.34 To Print, Endless use of model and blender knowledge for future projects. | ||
Hockey Stick Grip | [43] OEM Commercial Equivalent, $25 | $1
(96%) | ||
RC Drift Chassis | [44] Commercial Equivalent, ~$370 | Print time of 40+ hours and ~2kg material ($25) 94% Savings | ||
[45] | No commercial equivalent, close estimate is around $10-$15 from Nebo flashlights on amazon that have a charging base vs those that don't. [46] | Print time of about 50 minutes and cost of $0.24 based on $20/kg and 12g of filament, an approximate savings would be around $9.76 if one existed for this flashlight. | ||
Ski Waxing Rotobrush Handle | [47], $100 | Overall Cost - $13.16
Savings of 87% | ||
Shim designed for Papernet paper towel dispensers BradleyLarson (talk) 07:42, 13 December 2018 (PST) | No commercial equivalent, but it makes the $60 dispenser usable | Print time of about 1.5 hours at 40 mm/s and cost of $0.62 based on $20/kg and 31g of filament) | ||
Smart CCTV | NestCam IQ $300 | Savings of $250. Can be programmed to work with Alexa, google home and apple Homekit | ||
Ski Wax Scraper Set | Swix Pencil Groove Scraper ($5.95), Skinny Skis Klister/Kick Wax Scraper ($10), General Wax Scraper ($5.95) | Groove Scraper (7g), Klister scraper (19g), General Scraper (20g) -> 46g total * $15/1000g = $0.69 -> $21.90 - $0.69 = $21.21 = 96.8% savings | ||
Block Printing Press | Manual Block Printing Press ($54+) | Total Print Time: ~6 hrs, Filament: .37 kg @ $7.40, Hardware: $6.00, Savings: $40.60 minimum | ||
Mostly 3DP Electric Skateboard | Commercial Equivalent: Boosted Board Mini ($999) | Total Print Time: ~20 hrs, Plastic Usage: Skateboard - 1200g Pellets ($2.64) Other Parts - 390g PC Filament ($9.75), Hardware: $269, Total Cost: $282.37 Savings: $716.63 or 72% | ||
PWC Speaker Mount | Speaker Housing ($364.99 w/o speakers) total with speakers/wiring/electronics ~$500+ | Cost savings of $420+
| ||
Encoder shaft and base | No commercial equivalent available but cost savings upto $55-65 | The total cost including material, machine, tool and manual labor cost goes around 60-70 dollars. Cost required to print both parts is about 3-4$ | ||
Wood Printed Letter with Lights | Range $40 - $120 | Total savings range: $32.12-$112.12 | ||
Green Sand Ram | Could not find commercial equivalent that was not automatic but it does provide a cheap solution for small operations | Print time of 5.5 hours and 175g material ($3.50) | ||
Planar Board | [48], $38.00 | Cost to Print: $1.85
Savings: $36.15 (95%) | ||
Terminal Tool | [49], $22.00 | cost savings $21.36 (98%) | ||
[50] | Commercial Equivalent $350 | Cost to Print with Bearings and Screws ~$25. Savings of $325. Future Plan to use two position plungers and 3 piece design rather then 3. | ||
Tabletop RPG Terrain | Original Product no longer in manufacture, resale market is around $10 - $25 | Savings is ~9$ per 6Hex | ||
Boost Gauge Pod | Similar Product Currently on Market, $155 | Cost to print: $1.25, Cost of Double sided Tape Used: $0.08, Cost savings: upwards of 80% | ||
Pit Viper Sunglasses Case | Similar Products, $8-20 | Cost to print: $3.22, Cost savings: ~ $5+ (60%) | ||
Broomball Broom Holder | [51], closest market approximation: 14$ | Cost to print: $1.98, Cost savings: ~ $12+ (85%) | ||
[52]Wheel Chair Joystick Extension | [53] Commercially Available, $20 | Cost to print: $0.21
(99% Savings) | ||
Wireless Watch Charger | [], closest market approximation: $30 | Cost to print: $1.30, components: $12, Cost Savings: ~ $17 | ||
Customizer: [54] MyMiniFactory: [55] | Customizable Wrist Support. Closest market approximation: $6 | Cost to print: $2.00, Cost savings: ~ $4.00+ (300 %) | ||
Tennis Ball Thrower | Commercial cost $10 | Cost to print: $4.50, Cost savings: $5 (50%) | ||
Buchner funnel | Closest market approximation: $40 [56] | Cost to print: $1.50, Cost Savings: ~ $35-40 | ||
Weight Lifting Clamp | $15/clamp | Cost to print: $2.08, Cost savings: ~14/clamp (There are many in a weight room) | 104 g of material. 4 hours print time. | |
Fishing Boat Tool Holder | [57], $31 | Cost to Print: $1.30, Total Savings: $29.70 (~97%) | ||
Smart Phone Adaptive Otoscope with lens | At home otoscope: $18
Cell Phone adaptive otoscope $40 - $300 |
Printed pieces cost: $0.18, Disposable camera (lens): $9, Cost savings: ~$30-290 | ||
Peg Measure | Commercial Equivalents available starting from $15-20 | This product cost ~$0.62, can be made customized without much of cost addition
% Cost saving = upto 97% | ||
Yo Buddha Pen stand | Yo-Buddha-pen-stand Commercial a priceless gift | This product cost ~$1.93, can be made customized without much of cost addition | ||
Bike Lock Holder with container Q. I. Kaspriak (talk) 07:20, 13 December 2018 (PST) | Commercial equivalent costs ~$20 On Amazon | cost $0.50-$4 | ||
Snow Stop for metal roof | $2-5 | Cost to print: $1.20, Cost savings: ~ $0.80 to $3.80 per part (100 parts or more needed) | ||
Hook extention | Commercial equivalent ~ No item exactly like it but around $10-$15 is a good estimate | This product cost ~$1.11 | ||
DJ Knobs and Faders By: Levi Oxner | Chroma Caps, $1.50 per | Saved about $1.48 per knob (Up to ~$20) | ||
Charging dock for iPhone, apple watch and airpods by Sasank Potluri (talk) | $40.99
to $110.99 |
costed me $3.68 to print ; saved - $38 to $108 (91% to 96.68%) | ||
Ball pitcher for low weight baseball By Ajit thachireth (talk) | 40 $ to 150$ | costed me 4$ saved 30 to 40$ | ||
Chess Board Base | Commercial Equivalent | Cost savings of over $140 | ||
File:Peg Measure.JPG | [58] | Commercial Equivalents available starting from $15-20 | This product cost ~$0.62, can be made customized without much of cost addition | % Cost saving = upto 97% |
DSLR Camera Tripod! | Commercial Tripod $50-$100 | 3D Printed Tripod $2 of plastic and $3 of Bolts and nuts. Total cost is 5$ Cost saving up to 95% |
2018[edit | edit source]
2016[edit | edit source]
Digital Photo | Free Design/Link to YouMagine | Commercial equivalent link/Cost US$ | Approximate Savings in US$ |
---|---|---|---|
[59], $80 | $50 | ||
Trumpet Mute Stand | [60],$14-$29 | Cost about $0.60 in PLA material to make, cost savings between $13 and $28 depending on the product available in retail | |
Flexible Tablet Hanger by siranee Snuchitp (talk) 12:41, 7 December 2016 (PST) | [61] or [62], $24.99 | $20 | |
Weightlifting Wedge By: Andrew McMichael | [63], $17.95 | $16 | |
Multi-Tiered Jewelry Holder By: Kathrine Cipriano | [64], $98 | $95.16 | |
File:Headphone Holder.jpg | Wall Mounted Heaphone Holder By: Christopher Ely | [65], $10 | $9 |
Earbud Headphone Clip By: Daniel Sullivan | [66], $12 | $11.90 == %98 | |
Fourth Arrow Camera Mount By: Ross Michaels | Commercial Camera Mount, $39 | Savings of $35.41 (90.7%) Printing Cost: $1.58 (filament) + 2.01 (bolts & nuts) = $3.59 | |
Gas Cap Wrench By: John Laureto | Gas Cap Tool, $15.95 | Printing Cost: $1.03 (Assuming Hatchbox PLA @ $22.99/kg) Savings: $14.92 | |
Hockey Stick Holder By: David Swanson |
Hockey Stick Rack, $30.00 |
$28.53 | |
C920 Lens Holder By: Nicholas Kolean | Lens Mount, $29.40 | $29.36 | |
[67] By: Logan Stetsko and Yani Beeker | [68], $800 | $775 | |
External Hard Drive Hanger By: Andrew Houghtaling | Hanging Hard Drives, Price Not available, Velcro Strips, $8.80 | $8.30 (compared to velcro mounting method) | |
Switch Enclosure By: Nick Lanter | [69], $50.70 | $49.44 | |
Push up grips By: Shan Zhong | Commercial push up grips, $20 | The total plastic consumption is 152 grams so the total cost is just $3.24 based on the filament price which is $21.3/kg. The total cost saving is $16.76 | |
Clinometer [70] By: Ben Savonen | Costs range from $25 [71] to well over $100 [72] | Design uses 51 grams of PLA plastic. (In the photo, wood infused PLA was used, but this is not required). Assuming $23/kg this design costs $1.17 plus the cost of the M3 nut, bolt (20mm), and washer <$.10. Total cost: <$1.27. Savings of $21.73. | |
AR-10 Ammo Holder By: Zachary Verran | Cost of similar product online: Range from $25 [73] to $65 [74]
Can be as cheap as $6 [75] |
Cost of printing: 39 grams of filament was used with 20 fill density @ ~$30 per kg of filament = $1.17
Savings anywhere from ~$5 to ~$64. | |
Underbarrel GoPro Mount By: Cole Aukee | Cost of equivalent commercial product: $69 GoPro Mount from Cabela's | Cost to print: 19 grams of filament at $25 per kg of filament = $0.47 + $1.04 hardware
Savings up to $67 | |
Abstract Style Chess Set By: Ricardo Reyes | Cost of equivalent commercial product: $20 Commercial Chess Set | Cost to print: $5 worth of filament
Savings up to $15 - $1,500 depending on the quality of chess set you're looking for | |
Shotgun Shell Belt Holder By: John CI Smith | [76] $20 | Savings of $19.43 | |
Lee Loadmaster Die Stand and Accessories By: Josh Mucinski | Coded in OpenSCAD.. | Cost of printing: $3.91
Savings anywhere from ~$50 to priceless (saving a life/lives) | |
Caesar Knife Block By: Tobias Mahan | [77] [78] $18 | $15 | |
Snowboard Bindings By: Monica Fraser | Medium Snowboard Bindings $150 | ($11.70 per binding in printing with TPU and PLA, 23.40 for both bindings + ~$10 in nuts and bolts = $33.40 Total savings: $116.60 | |
Toaster Handle Replacement by mwcurtis | [79], $37.43 | $36.81 | |
[80] By: Alex Herbst | [81] $50 | No savings since there isn't anything like it at the same scale | |
[82] By: Jacob Robinson | [83] $450 | Cost to print and build: Roughly $250, Cost to buy: $400+, total savings $150+ | |
Adjustable Camera Mount By: Alexander Ciesla | Platypod pro $99.00 | Filament Cost: $4.06 Hardware Cost: $11.32 Total Cost: $15.38 Total Savings: $83.62 | |
[84] By: John Risch | [85] $37 | Cost to make is less than $1 for the plastic and about $5 for the sharpening stone | |
[86] By: Jordan LaFontaine | [87] $39.99 | Filament Cost: $2.84 Total Savings: $37.15 | |
EZ Ski Boot Buckler By: Elizabeth Held | Commercial Equivalent: $7.99-$14.99 | Filament Cost/Total Cost: $0.87 Total Savings: $14.12 | |
Modular Craft Cabinet By: Stephen Krease | Commercial Equivalent $18.23 | Filament Cost: 90 grams totaling $1.71 per box. Purchase is x6 Total Savings: $7.98 | |
Adjustable Shooting Stick/Monopod[88] By: Andy Jensen | Commercial Equivalent[89], $50 | Savings-$45.92 Filament Cost-$1.58 Conduit Cost-$2.00 Bolt Cost-$0.50 | |
Laser Rangefinder Target By Pierce Jensen | No Real Commercial Equivalent, but Survey Markers Can Run Between 100 and 2000 Dollars: [90]: $149.95; [91]: $1950 | Magnets(x2)-~1 (Had On Hand), Reflective Tape: ~$6-$10 (Had on Hand), 25g Plastic: $0.57: Total: ~$7. Estimated savings between 95 percent and 99 percent. | |
Custom Tool Holder |
[92], $10.75 |
$10.18 | |
Guitar Holder by Mackspletch Mackspletch (talk) 1:05, 8 December 2016 (PST) | [93], $36.00 | $35 | |
Command Hook Equivalents for Med,Large, and Jumbo[94] | [95], $2.25 2.26 and 6.34 respectively | $2.13 $2.45 and $6.34, Pre-existing hooks in my house 10 mediums, 3 larges, and 2 Jumbos potential savings:41$ | |
Compound Bow Balancer Kerautio (talk) 07:41, 8 December 2016 (PST) | $289.99 | Purchased Components: $16.91
Printed Components: $4.42 Total Cost: $21.33 Savings = $268.66 | |
Adjustable Shooting Rest mcbrand | Commercial Equivalent, $29.99 | $22.55 | |
File:Ice clipper.jpeg | Ice Screw Holder vmmclain | [96], $7.95 | $7.79 |
[97] By: [[Jcvieau (talk) 06:44, 8 December 2016 (PST)] | [98] $9.99 | Savings of $9.51 | |
https://www.youmagine.com/designs/bac-beer-koozie Drhannah | Cost to produce ~$50 | No equivalent comercial product. | |
Subaru Impreza Cup Holder Joey Fordahl | No equivalent commercial product. | Less than $2 to make | |
Tool bag gift set MatthewPollack Matthew Pollack | [99], $25.99 | Savings of about $22.00 | |
Oven Stove Adjustment Knob By: Kyle Price | [100], $3 | Saved about $2.50 | |
TrackIR Headpiece By: Chrissy Kaub | [101], $43 | Saved about $30 |
2015[edit | edit source]
Digital Photo | Free Design/Link to Libre3D | Commercial equivalent/Cost | Approximate Savings in US$ | |||
---|---|---|---|---|---|---|
Acoustic Phone Holder |
[102], $50 |
$45 | ||||
Double Banana Hook Bllafata (talk) 06:53, 19 November 2015 (PST) | [103], ~$17 | $7 (not counting the cost of importing and time) | ||||
Uni-Troll Downrigger Base By: Connor Kmiec | [104], $23.99 | $21.76 | ||||
AR15 Freefloat Handguard By: Austin Ketterhagen | [105], $99.99 | $97.66 | ||||
Ski Waxing Vises By: Matthew Andres | Power Pro Vise, $269.99 | $233.96 | ||||
Prototype Reciprocating Blowback Nozzle | Typical Nozzle $25-85 | $24-$84 | ||||
Delta Minimal Clearance Table Saw Insert By: Paul StLouis | [106], $33.23 | $29.10 | ||||
Cellphone Car Cup Holder WayneHelminen (talk) 18:53, 9 December 2015 (PST) | [107], $13 | ~$9 | ||||
Ping Pong Paddle | [108], ~$6.49, for standard paddle | $5.20, plus never needing another paddle again | ! | |||
Desk or Car Glasses Clip Accessory, User:Thomas Korejsza Cost of plastic $0.41 | [109], Visor Clip $12.90 | $12.49 | ||||
Earring holder Earring holder User:Dhwani (talk) | ~$32 | ~$31 | ||||
Microwave Gear Replacement Parts | [110], $2.80 | $2.60 | ||||
Bottle Drying Tree By: Robert Arden | ~$20 | ~$18 | ||||
Euchre Score Board By: Hjhunt | ~$10.00 | ~$9.06 | ||||
Coat Hook with slider base
By: Handychandra7 (talk) |
Depends on the material, ranging from $20 - $80 | 100 grams of PLA for ~$2, saving from $18 - $79 (90% - 97.5% savings) | ||||
[111] | the full assembly costs around $40, 37 minutes to print, 5 minutes to clean part | 12 grams of PLA for ~$0.30, savings around $39.70 | ||||
Duel 9V Battery Box By: Mike Hartl | [113], $30 | $28 | ||||
Beerholder on Libre3D & Can Holder on Thingiverse with FreeCAD file | Comparable Bottle Holder, $9.99 | 61 grams of PLA for about 1.65 resulting in cost savings of $8.34 | ||||
Potato Masher By: Ethan Marshall | Commercial Potato Masher, $8.50 | Cost of Printed Potato Masher is $0.61, Total Cost Savings is $7.89 | ||||
Cat6 Audio End Point By:Paul Bristol | [114], $360 | Cost of End Point: $43, Total Cost Savings: $317 | ||||
Necktie Hanger By:Tyler Ernest | Tie Hanger, $16.29 | $15.65 | ||||
Toothbrush holder By:Erik Bain | Commercial Equivalent, $7.59 | Cost of toothbrush holder: $1.03, Total Cost Savings: $6.56 | ||||
Longboard Phone Mount By:William Venis | GOPRO SKATEBOARD RISER MOUNT, $31.58 | Cost of printed phone mount: $0.69, Total Cost Savings: $5.95 - $30.90 | ||||
Modular Wine Rack By:Kevin Sunderland | Modular Wine Rack -low end, $29.99
- Modular Wine Rack - high end, $119.95 |
Cost of printed Modular Wine Rack: $9.50, Total Cost Saving: $20.49 - $110.45 | ||||
Variable Holder Clamp By:Adam Pringle | Headphone holder, $19.99 | Cost of Variable Holder Clamp: $3.93, Total Cost Savings: $16.09 | ||||
Extended Razor Stand By:Klbarie (talk) 23:19, 9 December 2015 (PST) | No commercial equivalent multi-razor stand exists. Some vendors make custom artisan stands, $60 | Cost of Extended Razor Stand: $3.40, Total Cost Savings: $56.60 | ||||
kindle case By:Ngtanike (talk) 00:16, 10 December 2015 (PST) | http://www.amazon.com/Fintie-Kindle-Paperwhite-SmartShell-Case/dp/B009S2CXLK/ref=sr_1_1?ie=UTF8&qid=1449735162&sr=8-1&keywords=kindle+cover, 15$ | Cost of Kindle case: $3, Total Cost Savings: $12 | ||||
Pocket Peg Triangle Game | There is a larger size available to buy at wooden triangle peg game for,$2.69. I havent been able to find a pocket size version. | $2.11 (78%) | ||||
Mossberg 500 Accesories | Grip $19.95, Picatinny Rail $14.99 | Grip: $15.49, Picatinny Rail: $14.69 | ||||
Face Cookie Cutter | Custom Cookie Cutter, $50.77 | $50.54 (99.5%) | ||||
Toothbrush stand By: Shyam Sanjeevi | - Toothbrush stand, $9.99 | Cost of Toothbrush Stand: ~$10, Total Cost Savings: $9 (90%) | ||||
Hockey Tape Dispenser By: Hannah Powers | ~$12 (Not currently available) | ~$10 (83%) | ||||
LED Christmas Ornament | [115], $20 | ~$13 | ||||
Rocking Nail Polish Holder | Spill Proof Polish Holder on Amazon $11.45 | $10 | ||||
DSLR Automated Zoom Mount By:Derek Chopp | FFR-900 $249.95 | $229.95 | ||||
TV Mounted Contoller holder | Commercial Equivalent: $20.00 | Approximately $19.00 | ||||
APX->XTS series battery adapter By:Matthew Zawisza | NNTN8169A $51.98 | $51.97 | ||||
Coming Soon! | 2-Axis Gimbal System By:Spencer Allen | [116] $240 | Around $50 in savings compared to the listed example, though my design is considerably more capable. | |||
[117] By:Austin Howland | [118], $49.99 | $41.10 | ||||
Customized Chocolate Mold By:Troy Johnston | ~$40 | ~$38 | ||||
[119] By:Zach Chenier | [120], $5.00 | $4.45 | ||||
Multipurpose stand for cell-phone, spectacles, stationery and tools By:Karan Dhankani | Market Price(mainly because it's not easily available): $48 | Savings - $46.5 (~97% savings) | ||||
Longboard bearing rust, debris and water guard By:Pjgoreck (talk) | There is currently no commercial version of a longboard bearing rust, debris and water guard. The model is parametric and can be fitted to any wheel size. The size it is altered to will affect the cost slightly. | Plastic Cost: Aprox. $1 | ||||
Longboard bearing rust, debris and water guard By:Pratiksha Rakhe | A modifiable laptop table with table top and stand. Can be attached with nut, bolts and hinges. | Savings - $40 (~80% savings) |
2014[edit | edit source]
Digital Photo | Free Design/Link to Libre3D | Commercial equivalent/Cost | Approximate Savings in US$ | |
---|---|---|---|---|
Hockey Helper | [121]-Always unavailable but is $10.95 | $9.98 | ||
1UP Incense / Candle Holder | [122], Closest commercial equivalent -$8.99 | $6.92 | ||
Arduino Home Device Wall Mount | [123], Closest commercial equivalent is an enclosure - $4.50 | $2.91 | ||
Splined Bottom Bracket Tool | Park Tool bike tools BBT-32C bottom bracket key - $10.76 | $0.42 | ||
Toilet Paper Holder | Homedepot - $4.99 | $4.00 | ||
Libre3D Men's Restroom Sign | Restroom Signs - Pair=$364.00
|
$177.00 | ||
Open-Source Four Point Probe (OS-4PP) |
[124], $7300 |
$1700 | ||
Open-Source Hunting Tool | [125], $7.89 | $7.20 | ||
Spatula Sheath | [126], $9.95 | $9.15 | ||
Insulin Pump Clip Connector | [127], $19.95 | $19.90 | ||
3D Printed Custom T-Shirt | [128],$5.99 to $24.99 | $5.71 to 24.71 | ||
MOST DELTA Auto Bed Leveling | This Project does not save money but time. The average time it takes for someone to level their bed takes approximately 2 to 4 hours. | After the bed levelling system is set up it takes approximately 5 minutes to have the bed levelled. | ||
Michigan Tech Divot Removal Tool | Callaway Divot Removal Tool - I have found custom divot tools like this sell between $2.75 and $20.00 (depending on who the market is being sold to). | $2.63 to $19.87 | ||
Batman's Equipment] | [129], 259.00 | $350.00 | ||
Ice Scraper | [133],$6.40 to $15.00 | $6.00 to 14.60 | ||
Nintendo 3DS XL Stand | Commercial 3DS Stand - $12.95 | $11.11 | ||
Guitar Tone Knobs | [134]$7.29 for tone knob set | $7.00 | ||
Winter Carnival Letters and Punctuation | [135] $11.60 for Paraffin Wax
[136] $9.96 for 64 Pack Crayons |
Estimated $100 savings over their predicted 10-15 year lifespan. | ||
3D Printed Snomobile Air Intake | Commercial product,$69.99 | $67 | ||
Powder Baskets | Commercial Baskets,$21.95 | $20 | ||
Individual Vinyl Record Stand | There are no/very few commercially equivalent products. Approximate cost for a product such as this would be $5 - $12. | $4.20 - $11.20 | ||
Ginger Grating Plate | Various commercial offerings for as much as $12-15 | ~$10 | ||
Open-Source ORV Light | Replacement of rotting case varies from $25-$100 depending on original lamp. | ~$20-$95 | ||
Snowboard binding degree plate | Commercial product, $10-$20 | ~$8.22-$18.22 | ||
Sink Adapter | N/A, no commercial equivalent available | No burned or frozen hands | ||
Soccer Shin Guard | [137], $19 | $17.68 | ||
Moto G2 Dock. Made by User:Ab91 | No actual Commercial equivalent available. Closest is this, but only half of mine. $5-6. | ~$4-5. | ||
[138] Parametric Saxophone Mouthpiece | [139], $35, There are a few .stl files for alto and tenor saxophone, but none with parametric code. This allows quick modification of dimensions for different saxophones, as well as for changing the tone the instrument produces. | $34 | ||
Custom Case | A blank case like this This has no holes drilled. Custom ordering requires time and money. | ~$5-$200+ | ||
Customizable Propellers | Normally costs $1 per propeller. | ~$0.95 | ||
[140] Tattoo Gun | Normally between 70-400 [141] | ~$67-397 | ||
[142] wine glass hanger | [143],$100-$189 | $94.30-$183.3 | ||
[144] Aircraft model frame | [145],Commercial equivalence depends on size and should be more than $10 | ~$7 | ||
Crochet Hook Holder for Single-Handed Crocheting | No commercial version currently exists but generic work holders cost about $20 on amazon. | $7 | ||
Tablet Stand and bluetooth keyboard | Many commercial versions exists like this one, but tend to be design for a specific tablet. | $19.34-$59.34 | ||
Christmas Tree Stand | [146], $22.99 | $19.08 (base is made from a recycled shipping pallet) | ||
Printiverse | [147], Expen$ive | $Cheaper (The cost of a printer?) | ||
Tiered Jewelry Stand | [148] $20 | $18.15 | ||
Bread Slicing Guide | [149], $57.99 | $56.56 (base is made from a scrap hardwood board) | ||
[150] MTU Desk Accessory | [151] $23.99 | $23.6 | ||
[152] Trolling Motor Replacement Prop | Minnkota replacement prop[153] $39.99 | $32.49 | ||
[154] Airplane Yoke Cover | Full Yoke $150. | Cover costs $0.33 | ||
Physical Photoresistor Regulating Device | New Light: $80+. | Plastic Cost: <$0.75 | ||
[155] Hawse fairlead for snowboard winch | Fairlead $1.80 | Cover costs $0.86 | ||
Heliostat for tracking sun! | Heliostat $60-$80 | $30-$50 |
]]]