Winner of a the Gigabot social good contest |
---|
Error in widget YouTube: Unable to load template 'wiki:YouTube' |
Open source 3-D printing of OSAT is gaining traction as groups like Re:3D (makers of the Gigabot) have sponsored contests to encourage designers to think about using 3D printers for social good, Michigan Tech sponsored the 3D printers for peace contest, the Plastic Bank, Techfortrade and the Ethical Filament Foundation are developing a new social economy for recycled 3D printer filament and Tekla Lab sponsored a contest to make open source lab equipment.
Do you have a great idea for a open-source appropriate technology that could be 3-D printed? First check out all the existing designs here. If you can not find it then click the "edit" below and post your idea. If you have an Appropedia account you can tag it with your signature --~~~~
In the Fall every year MTU will be offering a class in open-source 3-D printing. One of the assignments will be to design and prototype OSAT. 50 students use this page for ideas.
Designers if you see a request for an item you would like to work on - you can tag it with your signature --~~~~ as well and leave a message for the requester or collaborators.
To see past results go here
Requests
- First check out all the existing designs here and on http://www.yeggi.com/.
- Heavy duty taps for tapstands or for buckets used for handwashing in emergency response. Talbot type taps.
- Threading set for water pipes that are used in Action Against Hunger's water provision programs
- Community feedback boxes that are easy to drop a note in but not possible for them to take the note out (as that should only be taken out by our designated staff) - that can be installed in communities for their feedback on projects
- Latrine/toilet sits or squads for children that can be used in emergency response on top of a latrine pit
- Water testing kit parts – for example pieces found in the Delagua or Wagtech water testing kit
- Innovative designs for a new type of Mid Upper Arm Circumference (MUAC) bracelet --bracelet/band that measures children and classifies them as malnourished which then Action Against Hunger does treatment and prevention work for. The traditional MUAC [1] is graduated and needs to be placed at the exact middle of the left upper arm of the child. The tension of the band is adjusted by the person collecting the data. Often errors with too tight or too loose tape measurements are observed. What we are hoping to develop is a MUAC bracelet that has a standard circumference of 115 mm (the threshold for acute malnutrition in young children). The bracelet would fit on an arm with a circumference of 115 mm or less and would fasten together via a clasp mechanism (to be determined). We are looking at designs that can be produced cheaply, so the less component parts the better.
- surgical retractors simple [2]
- surgical retractors complex [3] Robertarden (talk) 06:16, 17 November 2015 (PST)
- surgical retractors really complex [4]
Corn sheller- done -- Joshua (talk) 16:05, 21 July 2014 (PDT)Open source syringe pump- done --Joshua (talk) 14:20, 19 September 2014 (PDT)- Treadle pump
- composting toilet
- Micro-Turbines for Water PowerWcvenis (talk) 06:44, 17 November 2015 (PST)
- Seed drill for efficient planting EgJmbrooki (talk) 07:32, 13 November 2014 (PST)
- high efficiency small wind turbine - use [5]
Heliostat or Sun Tracker(talk) 07:41, 18 November 2014 (PST)- umbilical cord clamps [6][[User:Nicolas_Winkler]|Nicolas_Winkler]]
- limb prostheses (see Enabling the Future)
- high efficiency water pumps, spare parts
- tools Mikehartl (talk) 06:17, 17 November 2015 (PST)
- Open source hoe -- Goliath182 (talk) 07:42, 13 November 2014 (PST)
- Lightweight Wrenches Jcmayros (talk) 07:31, 13 November 2014 (PST)
- low force mating gears
- hinges -- D4r3llo5 (talk) 07:45, 13 November 2014 (PST)
- Clamps: "Wooden" Handscrew Style Bjholtz (talk) 07:47, 13 November 2014 (PST)
- Clamps with gearing system
- low force snaps for easy assembly/dis-assembly of mating parts. Jcgerdt (talk) 07:42, 13 November 2014 (PST)
- Parametric quick release buckles, similar to [7], but done in OpenSCAD and parametric. Only found 1 design that was adjustable, and that was in blender.Rmputzig (talk) 11:08, 13 November 2014 (PST)
- Pulleys Lucas Wilder (talk) 07:36, 13 November 2014 (PST)
- high efficiency stove components
- thermometer (digital)
- blood pressure monitor <$20
- stethoscope [8]--Bwbarker (talk) 07:45, 13 November 2014 (PST)
otoscope with adult and children sizesAmwallis (talk) 06:57, 13 November 2014 (PST)- small-scale wind turbine here and here and here
- low-cost-water-contamination-sensor
- Water filtration devices The Dean (talk) 11:04, 1 December 2014 (PST)
- 3d printable and tuneable gravity powered LED light
- newspaper briquet maker Jwkubist (talk) 14:25, 17 November 2014 (PST)
- plastic bottle stripper - examples: http://www.utsumi.com.br/pet/English/filetador/index.html (particularly the bottom) and http://www.livedebris.org/Photos/Art%20photos/Tutorials/bottle%20cutter%20tutorial.pdf Kemyszka (talk) 11:06, 18 November 2014 (PST)
Hydroponic halo ring- Top feed dripping device, Mvalessi (talk) 14:23, 15 November 2014 (PST)- Chicken feed holder and drinker for small scale poultry projects Jephias Gwamuri (talk) 17:56, 16 November 2014 (PST) [9]
- Simple Forestry Densiometer Brian Swanson (talk) 10:07, 18 November 2014 (PST)
- snap together shovel Zmalinow (talk) 07:37, 18 November 2014 (PST)
- Rain water filter/bottler Jack Hicks (talk) 07:43, 18 November 2014 (PST)
- Sprinkler Head Jameswberry (talk) 13:21, 19 November 2014 (PST)
- Tent Stakes TheRealSlimShady (talk) 19:07, 19 November 2014 (PST) Azw (talk) 07:10, 17 November 2015 (PST)
- Contoured Spigot for 5-gallon buckets Twfuller (talk) 06:29, 20 November 2014 (PST)
- Drip Irrigation Alex (talk) 10:10, 20 November 2014 (PST)
- Cassava (food) Press Bchaupt (talk) 21:03, 26 November 2014 (PST)
- Garden Hose Splitter sclarsen (talk) 12:48, 2 December 2014 (EST)
- Custom Shovel Handle Shane Clifford
- Shoes Sjhelmin (talk) 16:55, 2 December 2014 (PST)
- Drop Spindle for Spinning Wool into Yarn Amsteele (talk) 06:06, 4 December 2014 (PST)
- 3Dponics - 3D-printable hydroponics system Download 3Dponics 3:16, 1 May, 2015 (EST)
- hand washing station https://vimeo.com/83795806
- - metal printing - lucky iron totems - http://www.wired.com/2015/06/little-iron-chotchke-can-help-cure-big-health-issue/
- Variable Food Sifter Ampringl (talk) 18:49, 16 November 2015 (PST)
Red Labs
Bicycle parts
For MTU students interested in bicycle part design, Dr. John Gershenson has offered the use of his lab for measurements. existing bike hacks
- Tire
- Tube
- Frame
- Fork
- Chain
- Chain stay and seat stay
- Bike Chain Tensioner Spoonless (talk) 07:55, 13 November 2014 (PST)
- Handlebars
- Brake callipers Rivu (talk) 12:23, 17 November 2014 (PST)
- Bottom bracket
- CranksZhinek (talk) 10:12, 18 November 2014 (PST)
- PedalsRnmcfarl (talk) 07:34, 13 November 2014 (PST)
- Freewheel
- Spokes
- Front wheel (36 spokes)
- Rear wheel (42 spokes)
- Rim
- Hub David Porter (talk)
- Hub axle
- Seat WayneHelminen (talk) 07:16, 17 November 2015 (PST)
- Brake set (stirrups and rods)
- Bearings (steer tube)
- Bearings (engine, hubs)
- Frame tubing
- Handlebar grips Ab91 (talk) 07:55, 13 November 2014 (PST)
- Rack
- 7up Yan Guo(talk) 07:08, 18 November 2014 (PST)
- Fork supports
- Seat
- Mud guardRtgrady10Eli Gooding (talk) 07:10, 17 November 2015 (PST)
- Light
Reindeer Husbandry Applications
* ear-tags for reindeers
- electric fence components (e.g. insulators)
lasso accessory: figure eight pattern or perforated plate called also kielasta in Finnish. The accessory is used to create a noose which is set to be tightened around reindeer antlerJoshua (talk) 18:13, 22 October 2015 (PDT)
- snow shows141.219.157.211 06:48, 17 November 2015 (PST)
- horseshoes and snaffles (might be suitable for several herders groups, e.g. Tsataan people in Mongolia), plastic or metal Bllafata (talk) 07:14, 17 November 2015 (PST)
- water pumps for bottles (any sizes)
- plastic applicators for acupuncture (for any fields like medical backup)
- ultrasonic whistle against wolves (?)Tmjohnst (talk) 06:03, 15 November 2015 (PST)
- petrol-powered saw (parts)
- snowmobile (parts)
- outboard engine (parts)