m (Normalizing) |
|||
(45 intermediate revisions by 15 users not shown) | |||
Line 1: | Line 1: | ||
{{777}} | {{777 notice}} | ||
[[File:susgoals.png]] | |||
''' Assignment ''' | |||
# Identify an [[OSAT]] that you would like to design to be a 3D printable technology | # Identify an [[OSAT]] that you would like to design to be a 3D printable technology | ||
# Make sure someone else has not already done it : existing designs [[:Category: | # Make sure someone else has not already done it: existing designs [[:Category:OSAT 3D-Printable Designs|here]]. Also check former years [[777 OSAT projects 2014|2014]], [[777 OSAT projects 2015|2015]], [[777 OSAT projects 2016|2016]], [[777 OSAT projects 2018|2018]], (You can choose to do a major improvement on past design) | ||
# Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com | # Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com | ||
# Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia. | # Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia. | ||
# Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it) | # Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it) | ||
Line 12: | Line 14: | ||
# Print component and bring to class/ online students drop it off at Dr. Pearce's office box | # Print component and bring to class/ online students drop it off at Dr. Pearce's office box | ||
=Grading= | == Grading == | ||
* 20% Print quality | * 20% Print quality | ||
* 30% Documentation | * 30% Documentation | ||
* 25% Design (design for printing, plastic minimization) | * 25% Design (design for printing, plastic minimization) | ||
* 25% Function - Is it OSAT? Does it work? | * 25% Function - Is it OSAT? Does it work? | ||
* --- | |||
Automatic reductions: | Automatic reductions: | ||
=Gallery= | * 50% no source or the use of non-OS software | ||
* 10% per day for late | |||
== Gallery == | |||
Add your image and link the gallery below in a single line after the last one in the list | Add your image and link the gallery below in a single line after the last one in the list | ||
<gallery caption="777 OSAT 3-D Printable Designs"> | <gallery caption="777 OSAT 3-D Printable Designs"> | ||
File:elbow_splint_1.jpg| [[Parametric elbow splint]] | |||
File:Vent hanger.jpg|[[Car Heater-Vent Hanger|Vent Hanger]] | |||
File:20191204 185021.jpg|[[User talk:Siege|Calipers]] | |||
File:Aquaponics_with_plants.jpeg|[[Aquaponics System]] | |||
File:Clubfootbracefinal.jpg|[[Club foot Brace for Infants]] | |||
File:Printed Locking Forceps.JPG|[[Item: Locking Forceps|Locking Forceps with Interchangeable Tips]] | |||
File:IMG_2298.jpg|[[Ankle Splint|Ankle Brace]] | |||
File:Complete_assembly.jpg|[[Bucket Shower]] | |||
File:FinalRing.JPG|[[Commode]] | |||
File:Rain Water Purifier.jpg|[[Rain Water Purification and Storage|Rain Water Purification & Storage]] | |||
File:Printed_chain.jpg|[[Rain Chain]] | |||
File:Tablesawstick.jpg|[[Table Saw Fence Push Stick]] | |||
File:SPOONFORK.jpg|[[Spoon Multi-tool]] | |||
File:ATB_Wrench.png|[[Pocket Wrench]] | |||
File:Fecal kit complete.jpg|[[Fecal Sample Collection Kit|Fecal Sample Kit]] | |||
File:Rsimpson_Final_OSAT.jpg|[[Updated Forestry Densiometer (Smartphone Capable)|Updated Forestry Densiometer]] | |||
File:CT pic.JPG|[[Quick Square]] | |||
File:Ice_Scraper_funnel.JPG|[[Ergonomic Ice Scraper|Ergonomic Ice Scraper/Funnel]] | |||
File:VerticalStorageContainerPieces.jpg|[[Parametric Vertical Storage]] | |||
File:AssemblyA.JPG|[[Tools To Measure Children's Height]] | |||
File:Ram Pump 2.JPG|[[Ram Pump]] | |||
File:Dlbrinks_3v_lion.jpg|[[Use Li-ion Batteries Instead of Alkaline]] | |||
File:Werthmanhammerassy.jpeg | [[Improved Hammer]] | |||
File:Snow_Shovel_Printable_Outdoors.jpg | [[Snap Together Snow Shovel]] | |||
File:FlyWheel and Pump Handle.PNG | [[Momentum Fire Starter]] | |||
File:Light_Attachment.jpg | [[Gravity Light Attachment]] | |||
File:PrintedDiverter.jpg | [[Urine Diverter for Composting Toilet]] | |||
File:parametric_Tweezers.PNG | [https://www.appropedia.org/Forceps/Tweezers Single use parametric tweezers] | |||
File:GPS Belt Clip V2.PNG | [[Improved GPS Belt Clip]] | |||
File:teshawar_infantometer.jpeg | [[OSAT project - Infantometer|Infantometer]] | |||
File:Neck_Immobilizer_Half_Assembly.jpg | [https://www.appropedia.org/Neck_Immobilizer_for_Trauma] | |||
File:Final_Pedal.jpg | [[Bike Pedals#Abstract|Bike Pedal]] | |||
File:SideViewOfPot.JPEG | [[Hanging Garden that Minimizes Water Use]] | |||
File:Projector_Mount.jpg | [[Low Profile Projector Ceiling Mount]] | |||
File:jchamilt_OSAT.PNG|[[OSAT toilet paper holder]] | |||
File:Ajv_motor_housings.PNG | [[OSHE Growbot Mounting Units]] | |||
File:Zsa_growbot_testbench.png | [[OSHE Growbot Motor Encoders]] | |||
File:Scale img.PNG | [[Weighing scales/mass balance|Mass Balance]] | |||
File:PointerTrowelPrint.jpg | [[Pointer Trowel]] | |||
File:Edger_pic.jpg | [[Hand Rotary Edger]] | |||
File:NEMA_6-50_Plug_Cover.JPG | [[Welder Plug Cover]] | |||
File:Assembly_talbot_closed.JPG | [[Talbot Type Water Tap]] | |||
File:Jcpaulse_OSATproject.jpg | [[Mineral Sifter]] | |||
File:SpeculumNP1.jpg | [[3D Print Speculum|Speculum]] | |||
File:Hand Wood Planer.jpg | [[Hand Wood Planer]] | |||
File:Assembled_Rest_2.JPG | [[Bowfishing Rest]] | |||
File:Final zero fridge.jpg | [[Zero-electricity refrigerator|Zero Electricity Refrigerator]] | |||
File:2019-12-04_(2).jpg | [[Fruit crusher]] | |||
File:Wedge.png | [[Mobilization Wedge]] | |||
File:Tray.PNG | [[Design Challenge#Kidney Tray|Kidney Tray]] | |||
File:bikeaxlejnb.jpg | [[Bike Thru Axle]] | |||
File:PharmacyBottleCapPrint.png | [[Pharmaceutical Bottle Caps]] | |||
File:IMG_0249.jpg| [[Crawler Harness Holder]] | |||
File:MountPart.jpg|[[Fuel Container Restraint#Assembly Instructions|Fuel Container Restraint]] | |||
File:Goniometer3Dprint.JPG | [[3D Printable Goniometer]] | |||
File:Leaf_Press_Image.jpg|[[Leaf Press for Leaf Protein Concentrate]] | |||
File:Swlfynn_OSAT_base_and_cap.jpg|[[Tool-Free Tile Leveling System]] | |||
File:RollerScrew_SCAD.png|[[3D Printable Cider Press]] | |||
File:Combined seat.jpg|[[Seat]] | File:Combined seat.jpg|[[Seat]] | ||
File:Monochromator_Final.jpg|[[Open Source Automated Scanning Monochromator|Automated Scanning Monochromator]] | |||
File:Nutcrackerosat.jpg|[[Nut Cracker]] | |||
File:smwurstosatpipette.jpg|[[Pipette Carousel]] | |||
File:toiletpaperholder.jpg|[[Toilet Paper Holder]] [[User:jdmajors|jdmajors]] | |||
File:OS Nano Balance mark1.JPG|[[3-D Printable Digital Balance]] | |||
File:HoriHoriKnifePrint.jpg|[https://www.appropedia.org/Hori_Hori_Knife_/_Shovel Hori Hori Knife / Shovel] | |||
File: ------ |[[Car Cable Ports - https://www.thingiverse.com/thing:4023342]] | |||
File:Kjkurtz spreaderassemb2.png |2L Seed spreader [https://www.appropedia.org/Seed_Spreader_/_Salt_Shaker] | |||
File: ThumbSplintFrontPic.jpg|Parametric brace for broken or sprained thumb "[[Thumb Spike]]" | |||
File: PeaSheller.JPG |Manual Pea Sheller [https://www.appropedia.org/Manual_Rotating_Pea_Sheller] | |||
File: Completed_cycle_tracker.jpg|Menstrual Cycle Tracker [https://www.appropedia.org/Daily_menstrual_cycle_tracker] | |||
File: tlfedorberrypicker.jpg|Fully Printable Berry Picker [https://www.appropedia.org/Fully_Printable_Wild_Berry_Scoop_Picker] | |||
File:printed_assembled_fitting.jpg |T Fitting [https://www.appropedia.org/Pipe_T-fitting ] | |||
File:MKM05.JPG |Potato Ricer [https://www.appropedia.org/Improved_Potato_Ricer ] | |||
File: OSAT_brush_thumbnail.jpg|[[Scrub Brush]] | |||
File:CommercialAutoinjectorAssembled.jpg|AutoInejcter[https://www.appropedia.org/AutoInjector] | |||
File: Cap.jpg |Modified cap for turning two-liter bottle into sharps disposal container [https://www.appropedia.org/Modified_cap_for_turning_two-liter_bottle_into_sharps_disposal_container] | |||
File:Finchers_GroundCollector2.jpg|[[Ground collector]] | |||
File:Custom Pegboard Panels.jpg|[[Modular Peg Board]] | |||
File:UltimateSnowScraper.jpeg|[[Ultimate Snow Scraper]] | |||
File:Behereau-full.jpg|Bike Brakes[[Open Source Bike Brake]] | |||
File:Modular_Surgical_Retractor_-_ldgaines.JPG|[[Surgical retractors really complex|Modular Surgical Retractor]] | |||
File:OSATbothProjects.jpg 1. [[Acorn Sheller]] 2. [[Wire Sensor Holder]] | |||
File:Mod Coral Regrowth Post.JPG|[[Modular Coral Regrowth Post]] | |||
File: JCS CarPorts.png | [[Car Charging Port https://www.thingiverse.com/thing:4023342]] | |||
</gallery> | </gallery> | ||
=Template | == Template == | ||
{{Create | |||
| preload = OSAT project | |||
}} | |||
{{Page data}} | |||
[[ | [[Category:OSAT 3D-Printable Designs]] |
Latest revision as of 13:56, 5 September 2024
Assignment
- Identify an OSAT that you would like to design to be a 3D printable technology
- Make sure someone else has not already done it: existing designs here. Also check former years 2014, 2015, 2016, 2018, (You can choose to do a major improvement on past design)
- Reserve your OSAT by signature tagging with ~~~~ next to the OSAT on the list generated by the Appropedia community: Requests for 3-D printable open source appropriate technology. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a significant way. Double check someone else has not already done a better job - use http://yeggi.com
- Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia.
- Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
- Include the following sections on your page using the template below (copy and paste wiki markup into your page)
- Add picture and link to your project page in gallery below.
- Print component and bring to class/ online students drop it off at Dr. Pearce's office box
Grading[edit | edit source]
- 20% Print quality
- 30% Documentation
- 25% Design (design for printing, plastic minimization)
- 25% Function - Is it OSAT? Does it work?
- ---
Automatic reductions:
- 50% no source or the use of non-OS software
- 10% per day for late
Gallery[edit | edit source]
Add your image and link the gallery below in a single line after the last one in the list
-
2L Seed spreader [2]
-
Parametric brace for broken or sprained thumb "Thumb Spike"
-
Manual Pea Sheller [3]
-
Menstrual Cycle Tracker [4]
-
Fully Printable Berry Picker [5]
-
T Fitting [6]
-
Potato Ricer [7]
-
AutoInejcter[8]
-
Modified cap for turning two-liter bottle into sharps disposal container [9]
-
Bike BrakesOpen Source Bike Brake