Car Heater-Vent Hanger

▼This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.

This is a device that clips into the heater vents for anyone who owns a car. For an example, this hanger can be used to dry out gloves or similar items after a day in the snow.

1. PLA Filament

Razor blade to get it off the print bed if you have good adhesion.

This device can be used by simply printing the part and then attaching it to the vent in car.

FreeCad Files and STL Files for all Components are Located on YouMagine

Link Here for STL and FreeCAD Files

1. Print out the necessary file (Car Heater-Vent Hanger)
2. Install the part in your car's heater vent
3. Hang any object that your heater vents can support.

• Assembly of Car Heater-Vent Hanger
• 
  Image 1
• 
  Image 2
• 
  Image 3

• Modifications may be necessary for different vehicles with different sized vents.

Plastic Used in Printing =~ $0.11

Car Air Freshener Clips