The following pages link to Pearce publications in solar photovoltaic systems:
Displayed 100 items.
- Expanded microchannel heat exchanger (← links | edit)
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices (← links | edit)
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation (← links | edit)
- MOST open access policy (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (← links | edit)
- Photovoltaic system performance enhancement with non-tracking planar concentrators: Experimental results and BDRF based modelling (← links | edit)
- Innovation through collaboration: scaling up solutions for sustainable development (← links | edit)
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development (← links | edit)
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype (← links | edit)
- Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities (← links | edit)
- Pearce publications in solar photovoltaic device physics (← links | edit)
- Pearce publications in materials science and engineering (← links | edit)
- Pearce publications in solar photovoltaic systems (transclusion) (← links | edit)
- Pearce publications in open source (← links | edit)
- Pearce publications in energy conservation (← links | edit)
- Pearce publications in education for sustainability and green pedagogy (← links | edit)
- Pearce publications in industrial symbiosis (← links | edit)
- Pearce publications in life cycle analysis and net energy (← links | edit)
- Pearce publications in energy policy and sustainability policy (← links | edit)
- Pearce publications in sustainable development and open source appropriate technology (← links | edit)
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation (← links | edit)
- Feeding Everyone No Matter What (← links | edit)
- It Is Time to Move Research Expenditures to the Denominator in University Metrics (← links | edit)
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun (← links | edit)
- Building Open Source Hardware in Academia (← links | edit)
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films (← links | edit)
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications (← links | edit)
- A Case for Weakening Patent Rights (← links | edit)
- Applications of Open Source 3-D Printing on Small Farms (← links | edit)
- Resilience to global food supply catastrophes (← links | edit)
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (← links | edit)
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells (← links | edit)
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM (← links | edit)
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing (← links | edit)
- Return on Investment for Open Source Hardware Development (← links | edit)
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing (← links | edit)
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices (← links | edit)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (← links | edit)
- Performance of U.S. hybrid distributed energy systems: Solar photovoltaic, battery and combined heat and power (← links | edit)
- Open-Source Photometric System for Enzymatic Nitrate Quantification (← links | edit)
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance (← links | edit)
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells (← links | edit)
- Educational Pathways to Remote Employment in Isolated Communities (← links | edit)
- The Effects of PLA Color on Material Properties of 3-D Printed Components (← links | edit)
- Photovoltaic System Performance Enhancement With Non-Tracking Planar Concentrators: Experimental Results and Bi-Directional Reflectance Function (BDRF) Based Modelling (← links | edit)
- Open-source, self-replicating 3-D printer factory for small-business manufacturing (← links | edit)
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems (← links | edit)
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer (← links | edit)
- Preparation of meta-stable phases of barium titanate by sol-hydrothermal method (← links | edit)
- Solar Photovoltaic Powered On-Site Ammonia Production for Nitrogen Fertilization (← links | edit)
- The potential of agrivoltaic systems (← links | edit)
- Sharing Free Knowledge to Save Humanity (← links | edit)
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages (← links | edit)
- Reducing the Threat of a Nuclear Iran with Photovoltaic Technology: The Generous Solar Option (← links | edit)
- Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudes (← links | edit)
- Aligning executive incentives with global public health goals (← links | edit)
- Free and Open-source Control Software for 3-D Motion and Processing (← links | edit)
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems (← links | edit)
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics (← links | edit)
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem (← links | edit)
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development (← links | edit)
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices (← links | edit)
- Open source 4-point probe literature review (← links | edit)
- Global value chains from a 3D printing perspective (← links | edit)
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices (← links | edit)
- How Accounting Costs Science Millions a Year (← links | edit)
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems (← links | edit)
- Retraining Investment for U.S. Transition from Coal to Solar Photovoltaic Employment (← links | edit)
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States (← links | edit)
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds (← links | edit)
- Alternative Foods as a Solution to Global Food Supply Catastrophes (← links | edit)
- Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing (← links | edit)
- Free and open-source automated 3-D microscope (← links | edit)
- Feeding Everyone if Industry is Disabled (← links | edit)
- Providing Non-food Needs if Industry is Disabled (← links | edit)
- Vitamins in Agricultural Catastrophes (← links | edit)
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply (← links | edit)
- Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides (← links | edit)
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally (← links | edit)
- Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography (← links | edit)
- Open Source Laboratory Sample Rotator Mixer and Shaker (← links | edit)
- 3D printed solar photovoltaic racking (← links | edit)
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain (← links | edit)
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger (← links | edit)
- U.S. market for solar photovoltaic plug-and-play systems (← links | edit)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (← links | edit)
- Nuclear Insurance Subsidies Cost from Post-Fukushima Accounting Based on Media Sources (← links | edit)
- Feeding Everyone if the Sun is Obscured and Industry is Disabled (← links | edit)
- Open-Source Automated Mapping Four-Point Probe (← links | edit)
- Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings (← links | edit)
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers (← links | edit)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (← links | edit)
- Emerging Business Models for Open Source Hardware (← links | edit)
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon (← links | edit)
- Thermal properties of 3-D printed polylactic acid-metal composites (← links | edit)
- Democratising design in scientific innovation: application of an open value network to open source hardware design (← links | edit)
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities (← links | edit)
- U.S. strategic solar photovoltaic-powered microgrid deployment for enhanced national security (← links | edit)
- 3D printed click-MUAC bands (← links | edit)
- Power and energy potential of mass-scale photovoltaic noise barrier deployment- A case study for the U.S. (← links | edit)