J.M.Pearce (talk | contribs) m (→See also) |
J.M.Pearce (talk | contribs) m (→See also) |
||
| Line 27: | Line 27: | ||
* [[RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament]] | * [[RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament]] | ||
* [[Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties]] | * [[Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties]] | ||
* [[3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing]] | |||
Revision as of 13:35, 27 November 2018
This project will provide solar photovoltaic power for a distributed manufacturing process that allows digital fabrication from recycled plastic.
Publications
- Debbie L. King, Adegboyega Babasola, Joseph Rozario, and Joshua M. Pearce, “Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities,” Challenges in Sustainability 2(1), 18-27 (2014). open access
See also
- Mechanical testing of polymer components made with the RepRap 3-D printer
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Development and feasibility of applications for the RepRap 3-D printer
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing
- Wood Furniture Waste-Based Recycled 3-D Printing Filament
- Life cycle analysis of distributed polymer recycling
- Recyclebot, Waste plastic extruder and Open source controller for polymer extruder
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing