m (→2018) |
|||
(19 intermediate revisions by 5 users not shown) | |||
Line 3: | Line 3: | ||
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class. | Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class. | ||
For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]] | For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]], [[Multi-material_additive_and_subtractive_prosumer_digital_fabrication_with_a_free_and_open-source_convertible_delta_RepRap_3-D_printer| Multimaterial additive and subtractive]] | ||
==Instructions== | ==Instructions== | ||
Line 20: | Line 20: | ||
== I am working on == | == I am working on == | ||
* short description and signature in bullet list | * short description and signature in bullet list | ||
* Athena II- [[Direct drive extrusion hot end for flexible materials]] (Undergrad) [[User:Molson|Matthew Olson]] ([[User talk:Molson|talk]]) 06:42, 6 November 2018 (PST) | |||
* Athena II - [[Carriage-Connecting Rod Sound Dampener.]] (Grad) [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:21, 6 November 2018 (PST) | |||
* Athena II - [[Athena Engraver mod]] (Grad) [[User:Sasank Potluri|Sasank Potluri]] ([[User talk:Sasank Potluri|talk]]) 18:59, 6 November 2018 (PST) | |||
=2018= | |||
==Graduate Mods== | |||
{{gallery | |||
|width=250 | |||
|height=250 | |||
|Image:AEM.jpg | [[Athena Engraver mod]] | |||
|Image:Direct drive.jpg | [[Direct drive extrusion hot end for flexible materials]] | |||
|Image:Attached To Printer.jpg | [[Carriage-Connecting Rod Sound Dampener.]] | |||
| | |||
}} | |||
=2016= | =2016= | ||
Line 32: | Line 47: | ||
|Image:Upgraded_Spool_Holder_WithSpool.jpg| [[Upgraded Spool Holder]] | |Image:Upgraded_Spool_Holder_WithSpool.jpg| [[Upgraded Spool Holder]] | ||
|Image:3 fans hot end holder-stl.PNG| [http://www.appropedia.org/Hot_end_holder_with_3_fans Hot end holder with 3 fans] | |Image:3 fans hot end holder-stl.PNG| [http://www.appropedia.org/Hot_end_holder_with_3_fans Hot end holder with 3 fans] | ||
|Image:FranklinInterface.jpg| [http://www.appropedia.org/Raspberry_Pi_Control_and_Wireless_Interface Raspberry Pi Control ] | |Image:FranklinInterface.jpg| [http://www.appropedia.org/Raspberry_Pi_Control_and_Wireless_Interface Raspberry Pi Control ] | ||
|Image:Kijenzi1.jpg| Climate Controlled Printer [http://www.appropedia.org/Climate_Controlled_printer] | |||
|image:Kijenzi.png|[[Development of a Resilient 3-D Printer for Humanitarian Crisis Response]] | |||
}} | }} | ||
Revision as of 03:21, 19 December 2018
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.
For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer, Multimaterial additive and subtractive
Instructions
- Add an image and hyperlink using double square brackets to the appropriate gallery below
- By clicking on the resultant red link create a page for your design
- Include the template {{777}} at the top of the page
- Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
- Include at least one photo
- If relevant include a Youtube video of operation/assembly or both
- Include tools needed
- Include a BOM
- Include clear instructions
- Include all SCAD and STL files for design improvement
- Link to any additional information (e.g. new software/firmware or slicing code at Github)
I am working on
- short description and signature in bullet list
- Athena II- Direct drive extrusion hot end for flexible materials (Undergrad) Matthew Olson (talk) 06:42, 6 November 2018 (PST)
- Athena II - Carriage-Connecting Rod Sound Dampener. (Grad) Reis G.M. Jones (talk) 07:21, 6 November 2018 (PST)
- Athena II - Athena Engraver mod (Grad) Sasank Potluri (talk) 18:59, 6 November 2018 (PST)