User:Arturopelayo/TissueDB Quantity review 2026-11-11

Unapplied review draft — 11 November 2026 (America/Mexico_City)

This page records proposed Quantity-column edits against captured Appropedia revisions. It is a review artifact, not a statement that the listed pages have been updated. Check each target's current revision before applying a proposal.

Scope and counts

The public source snapshot was captured on 12 November 2026, 00:08:47–00:11:25 UTC. Discovery covered all 749 main-namespace pages beginning with TissueDB, all 86 TissueDB-prefixed template/documentation pages, their transclusions, 25 category membership lists, and a title-search cross-check. All lists were exhausted without a remaining continuation token.

There were 850 discovered pages and 849 accessible source snapshots: 755 main-namespace pages, 88 template/documentation pages and seven category pages. Emergency Craniotomy (page ID 106879) was inaccessible because Appropedia denied access; its Quantity presence is unknown, not zero.

The audit contains 188 Quantity-table instances and 766 item rows: 731 current English rows on 84 pages, 20 translation rows, 13 historical sandbox rows and two documentation examples. Current English pages have 179 Quantity-table instances; 175 contain item rows and four contain only explanatory notices. Eleven non-item headings, notices and cost-total rows are retained separately in the audit.

Current English disposition	Rows	Treatment
Formatting corrections with bounded editorial proposals	99	Proposed below; 40 pages
Formatting corrections held for source review	13	Included among the 39 source-review holds
Other source-review cases	26	Quantity basis or source amount needs clarification
Unknown quantities	31	Keep the existing unknown marker; no quantity is inferred
Optional wording suggestions	3	Existing amounts remain acceptable
Compliant cell formatting	559	Retained without a formatting change
Total	731

Proposed field convention

Quantity answers how many or how much is required. Use a count when the item makes its counting unit clear. Necessary amount units and short bases such as 2 m, 50 mL, 1 set, 1 per use and As needed remain valid. Preserve stock purchased versus parts prepared or consumed; do not silently substitute a batch yield, reservoir capacity or package content for the amount used.

On Simulator Tissues, Structural Parts and Consumables tables, Notes retains source-backed dimensions, product specifications, part-code breakdowns, sharing, replacement and procurement context. Detailed construction actions belong in Build Instructions. Captured Simulator documentation.

On Material Tissues tables, there is no Quantity column. Notes explains the material's use and suitability for the named tissue and simulator; source-specific formulation belongs in the optional Recipe section. Material Consumables separately has Consumable, Quantity, Approximate Cost, Simulator and Notes columns; supply and per-model consumption stay distinct. Captured Material documentation.

On Tissue Materials tables, there is no Quantity column. Notes contains concise, source-backed statements about material role and suitability for the tissue and simulator, with useful variants or adaptations where relevant. Captured Tissue documentation.

Structure Component Tissues has neither Quantity nor Notes. Its columns are Tissue, Layer / Position and Key Properties. This correction does not add columns or reinterpret Key Properties. Captured Structure documentation.

The TissueDB/Simulators/Laparoscopic Box Trainer Simulator tool table has its own schema: Tool / Fixture, Quantity, Description and Notes, Cost. Its printer availability wording is held for source review.

Template and documentation proposals

Change the two Qty header definitions in Template:TissueDB Simulator Layout (captured revision 1296621) and the corresponding two definitions in Template:TissueDB Simulator Layout/sandbox (1296622) to Quantity. The Tissues and Structural Parts columns retain their existing order; Consumables already uses Quantity.

Revise Template:TissueDB Simulator Layout/doc (1296623) to separate count or amount from dimensions, cut sizes, part-code breakdowns and product specifications. Preserve necessary units, short quantity bases, existing Notes and source citations. The skin-sheet syntax example changes Quantity from 1 piece (10 × 10 cm) to 1, with Notes 10 × 10 cm sheet. Cut to size before assembly. The base-platform example already puts its dimensions in Notes and remains unchanged.

Wound Packing source notes

The five TissueDB/Simulators/Wound Packing Simulator proposals below use captured revision 1296015 and the public Pressure Simulator — Step by Step Building Manual.

Wood: preserve total 16 and all six part-code breakdowns. Those codes include five distinct stated lengths, so remove the inaccurate “six lengths” wording. W-5 remains 175 mm as on the page/diagram; the source table's 17 cm value remains a disclosed discrepancy.
Base board: preserve count 1 and move 600 × 400 × 10 mm into Notes.
Pressure channel pipe: preserve count 1 and move the 30 cm cut length beside the existing half-inch specification.
Spring: preserve one stock spring. Notes retains 30 cm stock length, 4.0 mm diameter, four prepared 4 cm segments and 16 cm used.
Ties: preserve one bag. The bag contains 10 ties; the source does not state how many are used.

The water row's current 1 remains a separate source-review hold because the source review found no stated water amount.

99 proposed editorial rows

These are bounded editorial proposals across 40 pages. The separate source-review, unknown, optional, translation and historical cases are not included in these page patches. Original revisions provide the source context and citations; copied reference markup is shown inert where needed so names from different pages do not collide.

Talcum Powder

TissueDB/Materials/Talcum Powder — captured revision 1296526; 1 row.

View row-by-row proposals

Talcum powder

Consumables, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	100 g (materials-list quantity; not an application dose)	100 g
Notes	Table 2 lists 100 g and US$3.00 for the WALL-GO materials. This is a historical supply-list price and quantity, not a per-model cost or dose. The paper gives no talcum-powder application method or per-model amount.	Table 2 lists 100 g and US$3.00 for the WALL-GO materials. This is a historical supply-list price and quantity, not a per-model cost or dose. The paper gives no talcum-powder application method or per-model amount.

Exact source and preserved reference markers

CAPTURED
Quantity: 100 g (materials-list quantity; not an application dose)
Notes: Table 2 lists 100 g and US$3.00 for the WALL-GO materials. This is a historical supply-list price and quantity, not a per-model cost or dose. The paper gives no talcum-powder application method or per-model amount.<ref name="medeiros2023" />

PROPOSED
Quantity: 100 g
Notes: Table 2 lists 100 g and US$3.00 for the WALL-GO materials. This is a historical supply-list price and quantity, not a per-model cost or dose. The paper gives no talcum-powder application method or per-model amount.<ref name="medeiros2023" />

Bowel Anastomosis Simulator (Habti)

TissueDB/Simulators/Bowel Anastomosis Simulator (Habti) — captured revision 1296614; 1 row.

View row-by-row proposals

Small Intestine

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 segment; approximately 30 cm long	1 segment
Notes	Approximately 177 g of Ecoflex 00-30 silicone is used per bowel segment. The mould reproduces a mucosal surface. The development team selected Shore 00-30 after testing different silicone hardnesses. Learners and clinicians considered the representation useful for bowel-anastomosis training, although the silicone had greater recoil than biological bowel and could tear during suturing.	Approximately 177 g of Ecoflex 00-30 silicone is used per bowel segment. The mould reproduces a mucosal surface. The development team selected Shore 00-30 after testing different silicone hardnesses. Learners and clinicians considered the representation useful for bowel-anastomosis training, although the silicone had greater recoil than biological bowel and could tear during suturing. Approximately 30 cm long.

Cervical Cancer Screening Simulator

TissueDB/Simulators/Cervical Cancer Screening Simulator — captured revision 1296642; 2 rows.

View row-by-row proposals

Cervix

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	2 models — nulliparous and parous	2
Notes	The source specifically uses soft water-based clay. Pink clay forms the squamous ectocervix; red clay marks the columnar epithelium and squamocolumnar junction; white clay represents the VIA-positive acetowhite lesion. This water-based formulation is source-specific and must not be replaced by the oil-based/stiffer clay formulation used in the separate IUD simulator.	The source specifically uses soft water-based clay. Pink clay forms the squamous ectocervix; red clay marks the columnar epithelium and squamocolumnar junction; white clay represents the VIA-positive acetowhite lesion. This water-based formulation is source-specific and must not be replaced by the oil-based/stiffer clay formulation used in the separate IUD simulator. One nulliparous model and one parous model.

Tongue-depressor crossbeams

Structural Parts, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	4 tongue depressors prepared as described	4
Notes	Structural reinforcement for the triangular supports, support pillars and cervix mount.	Structural reinforcement for the triangular supports, support pillars and cervix mount. Tongue depressors are prepared as described in Build Instructions.

Chest Tube Insertion Simulator (Brannan)

TissueDB/Simulators/Chest Tube Insertion Simulator (Brannan) — captured revision 1281788; 2 rows.

View row-by-row proposals

Bone (ribs, sternum, clavicles)

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 set (398 g PLA + 138 g PVA support)	1 set
Notes	Bony scaffold of the thorax; the source prints ten ribs per side, the sternum, the two clavicles and the flexible spine in ivory PLA with soluble PVA support.	Bony scaffold of the thorax; the source prints ten ribs per side, the sternum, the two clavicles and the flexible spine in ivory PLA with soluble PVA support. Printed with 398 g PLA and 138 g PVA support material.

Support stand

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 (100 g PLA)	1
Notes	Printed stand that holds the thorax in working orientation; designed in Autodesk Fusion 360 and printed on the Ultimaker 3.	Printed stand that holds the thorax in working orientation; designed in Autodesk Fusion 360 and printed on the Ultimaker 3. Uses 100 g PLA.

Chest Tube Insertion Simulator (Man-O-War)

TissueDB/Simulators/Chest Tube Insertion Simulator (Man-O-War) — captured revision 1296502; 1 row.

View row-by-row proposals

Bone (ribs)

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	10 (5 pairs)	10
Notes	Plaster casting roll wrapped over the rib cores cut from the bucket wall.	Plaster casting roll wrapped over the rib cores cut from the bucket wall. Arranged as five pairs.

Cricothyroidotomy Simulator (Gauger)

TissueDB/Simulators/Cricothyroidotomy Simulator (Gauger) — captured revision 1296558; 5 rows.

View row-by-row proposals

Skin

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 skin layer per session (or as reused)	1 layer per session
Notes	Outer skin surface over the laryngeal landmarks. External skin layer of the model, shown as removable.	Outer skin surface over the laryngeal landmarks. External skin layer of the model, shown as removable. Skin layer may be reused.

Cricothyroid membrane

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Target structure of the procedure. Integrated region of the 3D-printed medical-grade silicone laryngotracheal model.	Target structure of the procedure. Integrated region of the 3D-printed medical-grade silicone laryngotracheal model.

Thyroid cartilage

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Integrated region of the 3D-printed medical-grade silicone laryngotracheal model. Superior palpable landmark of the cricothyroid membrane. A standard front-of-neck-access landmark, not separately named by Gauger 2018.	Integrated region of the 3D-printed medical-grade silicone laryngotracheal model. Superior palpable landmark of the cricothyroid membrane. A standard front-of-neck-access landmark, not separately named by Gauger 2018.

Cricoid cartilage

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Integrated region of the 3D-printed medical-grade silicone laryngotracheal model. Inferior palpable landmark of the cricothyroid membrane. A standard front-of-neck-access landmark, not separately named by Gauger 2018.	Integrated region of the 3D-printed medical-grade silicone laryngotracheal model. Inferior palpable landmark of the cricothyroid membrane. A standard front-of-neck-access landmark, not separately named by Gauger 2018.

Trachea

Tissues, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Downstream airway lumen distal to the cricothyroid-membrane access site. Integrated region of the 3D-printed medical-grade silicone laryngotracheal model.	Downstream airway lumen distal to the cricothyroid-membrane access site. Integrated region of the 3D-printed medical-grade silicone laryngotracheal model.

Cricothyrotomy Simulator (Calvo)

TissueDB/Simulators/Cricothyrotomy Simulator (Calvo) — captured revision 1296630; 5 rows.

View row-by-row proposals

Subcutaneous tissue

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated layer in the same pork-belly slab	1 layer
Notes	Inherited REAL CRIC tissue concept. Calvo et al. infiltrate this layer with simulated blood and extend the blood-delivery tunnel through it to improve bleeding during incision.	Inherited REAL CRIC tissue concept. Calvo et al. infiltrate this layer with simulated blood and extend the blood-delivery tunnel through it to improve bleeding during incision. Integrated in the same pork-belly slab as the skin; not an additional slab.

Thyroid cartilage

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated landmark	1
Notes	3D-printed REAL CRIC airway component. Palpable superior landmark of the cricothyroid membrane. The airway geometry derives from the REAL CRIC predecessor rather than originating with Calvo et al.	3D-printed REAL CRIC airway component. Palpable superior landmark of the cricothyroid membrane. The airway geometry derives from the REAL CRIC predecessor rather than originating with Calvo et al. Integrated component of the existing anatomical model; not a separate material order.

Cricoid cartilage

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated landmark	1
Notes	3D-printed REAL CRIC airway component. Palpable inferior landmark of the cricothyroid membrane. The underlying airway geometry is inherited from REAL CRIC.	3D-printed REAL CRIC airway component. Palpable inferior landmark of the cricothyroid membrane. The underlying airway geometry is inherited from REAL CRIC. Integrated component of the existing anatomical model; not a separate material order.

Cricothyroid membrane

Tissues, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated target	1
Notes	3D-printed REAL CRIC airway component. Target access site for the cricothyrotomy procedure. Air escapes through this region when the learner enters the airway.	3D-printed REAL CRIC airway component. Target access site for the cricothyrotomy procedure. Air escapes through this region when the learner enters the airway. Integrated component of the existing anatomical model; not a separate material order.

Trachea

Tissues, source row 6. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated airway	1
Notes	3D-printed REAL CRIC airway component. Downstream airway lumen. An endotracheal tube inside the printed airway connects the Calvo foot-operated pump to the model.	3D-printed REAL CRIC airway component. Downstream airway lumen. An endotracheal tube inside the printed airway connects the Calvo foot-operated pump to the model. Integrated component of the existing anatomical model; not a separate material order.

Cricothyrotomy Simulator (Kei)

TissueDB/Simulators/Cricothyrotomy Simulator (Kei) — captured revision 1296556; 6 rows.

View row-by-row proposals

Subcutaneous tissue

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 slab per session (same slab)	1 slab per session
Notes	Same pork-belly slab as the skin row. The pork belly's underlying muscle and fascia (Kei 2019, which describes "porcine skin with underlying muscle and fascia"); the subcutaneous fake-blood weal is injected into this layer and bleeds when the skin is incised.	Same pork-belly slab as the skin row. The pork belly's underlying muscle and fascia (Kei 2019, which describes "porcine skin with underlying muscle and fascia"); the subcutaneous fake-blood weal is injected into this layer and bleeds when the skin is incised.

Thyroid cartilage

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Part of the 3D-printed trachea model. The upper laryngeal cartilage bordering the cricothyroid membrane; implied by the 3D-printed trachea model, not separately named by Kei 2019. Reusable rigid structure.	Part of the 3D-printed trachea model. The upper laryngeal cartilage bordering the cricothyroid membrane; implied by the 3D-printed trachea model, not separately named by Kei 2019. Reusable rigid structure.

Cricoid cartilage

Tissues, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Part of the 3D-printed trachea model. The lower laryngeal cartilage bordering the cricothyroid membrane; implied by the 3D-printed trachea model, not separately named by Kei 2019. Reusable rigid structure.	Part of the 3D-printed trachea model. The lower laryngeal cartilage bordering the cricothyroid membrane; implied by the 3D-printed trachea model, not separately named by Kei 2019. Reusable rigid structure.

Trachea

Tissues, source row 6. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Reusable rigid anatomical core (the 3D-printed trachea model, from the open-access STL). Resin lasts more than 100 sessions; filament is cheaper but more brittle.	Reusable rigid anatomical core (the 3D-printed trachea model, from the open-access STL). Resin lasts more than 100 sessions; filament is cheaper but more brittle. Integrated component of the existing anatomical model; not a separate material order.

6-0 endotracheal tube

Structural Parts, source row 9. Captured revision

Field	Captured value	Proposed value
Quantity	1 per learner (cricothyrotomy supply)	1 per learner
Notes	One of the cricothyrotomy supplies Kei 2019 provides to the learner (with the No. 10 scalpel and bougie); the source does not describe how it is used.	One of the cricothyrotomy supplies Kei 2019 provides to the learner (with the No. 10 scalpel and bougie); the source does not describe how it is used.

Bougie and No. 10 scalpel

Structural Parts, source row 10. Captured revision

Field	Captured value	Proposed value
Quantity	1 each per learner (cricothyrotomy supplies)	1 each per learner
Notes	The learner's cricothyrotomy supplies (with the 6-0 endotracheal tube), as listed by Kei 2019.	The learner's cricothyrotomy supplies (with the 6-0 endotracheal tube), as listed by Kei 2019.

Cricothyrotomy Simulator (Muller)

TissueDB/Simulators/Cricothyrotomy Simulator (Muller) — captured revision 1296632; 4 rows.

View row-by-row proposals

Trachea

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated airway	1
Notes	Strategic Operations Inc. 3-in-1 TCCC manikin. The integrated manikin airway receives the cuffed endotracheal tube.	Strategic Operations Inc. 3-in-1 TCCC manikin. The integrated manikin airway receives the cuffed endotracheal tube.

Porcine skin

Consumables, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 fresh section per trainee/reset	1 section per trainee/reset
Notes	Replaceable external incision layer.	Replaceable external incision layer. A fresh section is needed for each trainee/reset.

Microfoam surgical tape

Consumables, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 fresh 3-inch patch per trainee/reset	1 patch per trainee/reset
Notes	3M Microfoam surgical tape. Replaceable cricothyroid-membrane layer on the removable laryngeal insert.	3M Microfoam surgical tape. Replaceable cricothyroid-membrane layer on the removable laryngeal insert. Fresh 3-inch patch for each trainee/reset.

Disposable #10 scalpel

Consumables, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 new scalpel per participant	1 per participant
Notes	Used to incise the porcine skin and simulated cricothyroid membrane. The source specifies a fresh blade for each participant.	Used to incise the porcine skin and simulated cricothyroid membrane. The source specifies a fresh blade for each participant.

Emergency Department Thoracotomy Simulator (Misra)

TissueDB/Simulators/Emergency Department Thoracotomy Simulator (Misra) — captured revision 1296064; 1 row.

View row-by-row proposals

Lung

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 (left side)	1
Notes	The visualisation target on chest entry; a soft-foam core gives lung-like bulk. Built from two packing-foam blocks. The gauze wrap is pink-coloured.	The visualisation target on chest entry; a soft-foam core gives lung-like bulk. Built from two packing-foam blocks. The gauze wrap is pink-coloured. Left side.

Grapefruit Distal Anterior Cerebral Artery Bypass Simulator

TissueDB/Simulators/Grapefruit Distal Anterior Cerebral Artery Bypass Simulator — captured revision 1296564; 4 rows.

View row-by-row proposals

Skin

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 grapefruit (shared)	1 grapefruit
Notes	Rind and pith represent skin and subcutaneous tissue in the operative approach.	Rind and pith represent skin and subcutaneous tissue in the operative approach. Shared by the tissue representations in this model; not an additional grapefruit for each row.

Subcutaneous tissue

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 grapefruit (shared)	1 grapefruit
Notes	Rind and pith represent skin and subcutaneous tissue in the operative approach.	Rind and pith represent skin and subcutaneous tissue in the operative approach. Shared by the tissue representations in this model; not an additional grapefruit for each row.

Arachnoid mater and pia mater

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 grapefruit (shared)	1 grapefruit
Notes	The thin layer over the outer grapefruit flesh represents the arachnoid mater and pia mater jointly.	The thin layer over the outer grapefruit flesh represents the arachnoid mater and pia mater jointly. Shared by the tissue representations in this model; not an additional grapefruit for each row.

Cerebral cortex

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 grapefruit (shared)	1 grapefruit
Notes	The grapefruit flesh represents cerebral cortex. Tearing the flesh during the approach represents iatrogenic cortical injury.	The grapefruit flesh represents cerebral cortex. Tearing the flesh during the approach represents iatrogenic cortical injury. Shared by the tissue representations in this model; not an additional grapefruit for each row.

Hemorrhage Control Simulator (Malik)

TissueDB/Simulators/Hemorrhage Control Simulator (Malik) — captured revision 1281797; 1 row.

View row-by-row proposals

Clothing (shirt, tights, or pants)

Structural Parts, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	Optional, 1 set	1 set
Notes	Optional overlay on the leg to add scenario context for trauma training.	Optional overlay on the leg to add scenario context for trauma training.

IUD Insertion Simulator

TissueDB/Simulators/IUD Insertion Simulator — captured revision 1294521; 2 rows.

View row-by-row proposals

3D-printed uterus (mounting body)

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	3 (one per depth)	3
Notes	Three uterus models with lids provide uterine depths of 5.0, 7.0 and 10.0 cm for blinded insertion practice. The cervix models mount on the uterus models. These three simulated sounding depths are specified in the developer module. The models are reusable. The inspected module provides no downloadable STL files.	Three uterus models with lids provide uterine depths of 5.0, 7.0 and 10.0 cm for blinded insertion practice. The cervix models mount on the uterus models. These three simulated sounding depths are specified in the developer module. The models are reusable. The inspected module provides no downloadable STL files.

Exact source and preserved reference markers

CAPTURED
Quantity: 3 (one per depth)
Notes: Three uterus models with lids provide uterine depths of 5.0, 7.0 and 10.0 cm for blinded insertion practice. The cervix models mount on the uterus models. These three simulated sounding depths are specified in the developer module.<ref name="iud-uterus-build">Medical Makers. ''3D Printed Uterus Simulators.'' [https://www.appropedia.org/3D_Printed_Uterus_Simulators Original developer build].</ref> The models are reusable. The inspected module provides no downloadable STL files.

PROPOSED
Quantity: 3
Notes: Three uterus models with lids provide uterine depths of 5.0, 7.0 and 10.0 cm for blinded insertion practice. The cervix models mount on the uterus models. These three simulated sounding depths are specified in the developer module.<ref name="iud-uterus-build">Medical Makers. ''3D Printed Uterus Simulators.'' [https://www.appropedia.org/3D_Printed_Uterus_Simulators Original developer build].</ref> The models are reusable. The inspected module provides no downloadable STL files.

Support for the curved-sound arrangement

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 set, when using a curved sound	1 set
Notes	Holds the canal at 45° while the uterus is raised until the cervical opening is centred on the canal. A roll of masking tape and a notebook are the source-reported elevation supports.	Holds the canal at 45° while the uterus is raised until the cervical opening is centred on the canal. A roll of masking tape and a notebook are the source-reported elevation supports. Required when using a curved sound.

Injection Laryngoplasty Simulator (Lee)

TissueDB/Simulators/Injection Laryngoplasty Simulator (Lee) — captured revision 1296574; 3 rows.

View row-by-row proposals

Thyroid Cartilage

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated landmark	1
Notes	Part of the single-piece rigid laryngeal framework. It provides a palpable landmark for locating the injection site. The cost in this row covers filament for the whole framework, not this cartilage alone.	Part of the single-piece rigid laryngeal framework. It provides a palpable landmark for locating the injection site. The cost in this row covers filament for the whole framework, not this cartilage alone.

Cricoid Cartilage

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated landmark	1
Notes	Part of the same ABS framework and a palpable inferior laryngeal landmark. Its material cost is included in the framework total.	Part of the same ABS framework and a palpable inferior laryngeal landmark. Its material cost is included in the framework total.

Hyoid bone

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated landmark	1
Notes	Part of the same framework and a superior palpable landmark. Support material between the hyoid, thyroid and cricoid reinforces the framework without interfering with injections. Its material cost is included in the framework total.	Part of the same framework and a superior palpable landmark. Support material between the hyoid, thyroid and cricoid reinforces the framework without interfering with injections. Its material cost is included in the framework total.

Intra-abdominal Bleeding Simulator (Fernandes)

TissueDB/Simulators/Intra-abdominal Bleeding Simulator (Fernandes) — captured revision 1296633; 1 row.

View row-by-row proposals

Skin and Subcutaneous Tissue

Tissues, source row 9. Captured revision

Field	Captured value	Proposed value
Quantity	1 anterior layer	1 layer
Notes	EVA foam with a thin sponge layer represents skin and subcutaneous tissue and permits incision into the abdominal cavity.	EVA foam with a thin sponge layer represents skin and subcutaneous tissue and permits incision into the abdominal cavity. Anterior layer.

Laparoscopic Diaphragmatic Repair Simulator

TissueDB/Simulators/Laparoscopic Diaphragmatic Repair Simulator — captured revision 1281809; 1 row.

View row-by-row proposals

Diaphragm

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 mask body; 2 masks are used when the additional noseband fasteners are included	1 mask body
Notes	The stretched body of one disposable mask represents the diaphragm. Metal nosebands removed from two masks are cut in half to make four reusable corner fasteners. The nosebands are fixation components and do not represent diaphragm tissue.	The stretched body of one disposable mask represents the diaphragm. Metal nosebands removed from two masks are cut in half to make four reusable corner fasteners. The nosebands are fixation components and do not represent diaphragm tissue.

Laparoscopic Inguinal Hernia Repair Simulator (Hanssen)

TissueDB/Simulators/Laparoscopic Inguinal Hernia Repair Simulator (Hanssen) — captured revision 1296611; 2 rows.

View row-by-row proposals

Inguinal region

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 (pork chop)	1
Notes	The chop preserves the hemi-vertebra and its transverse process; the transverse process is painted white to represent Cooper's ligament. Biological substrate gives realistic tissue handling, especially for mesh fixation.	The chop preserves the hemi-vertebra and its transverse process; the transverse process is painted white to represent Cooper's ligament. Biological substrate gives realistic tissue handling, especially for mesh fixation.

Peritoneum

Tissues, source row 6. Captured revision

Field	Captured value	Proposed value
Quantity	1 field for both sides	1 field
Notes	The source used Ioban 6648 (3M). Covers both side-by-side models as the peritoneum and is detached during pre-peritoneal dissection.	The source used Ioban 6648 (3M). Covers both side-by-side models as the peritoneum and is detached during pre-peritoneal dissection.

Laparoscopic Inguinal Hernia Repair Simulator (Kurashima)

TissueDB/Simulators/Laparoscopic Inguinal Hernia Repair Simulator (Kurashima) — captured revision 1296613; 2 rows.

View row-by-row proposals

Peritoneum

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 sheet over the model	1 sheet
Notes	Press'n Seal clings to the sponge beneath it, so peeling the peritoneum off the abdominal wall feels as stubborn as a real preperitoneal dissection.	Press'n Seal clings to the sponge beneath it, so peeling the peritoneum off the abdominal wall feels as stubborn as a real preperitoneal dissection. Placed over the model.

Hernia sac and preperitoneal adhesions

Tissues, source row 9. Captured revision

Field	Captured value	Proposed value
Quantity	1 per model (right indirect; left direct plus femoral)	1 per model
Notes	The source used Press'n Seal and Fun-Tak. The sac's adhesions make careless dissection tear the thin plastic film just as it would tear real peritoneum, so the trainee must work meticulously.	The source used Press'n Seal and Fun-Tak. The sac's adhesions make careless dissection tear the thin plastic film just as it would tear real peritoneum, so the trainee must work meticulously. Right model: indirect hernia; left model: direct and femoral hernias.

Long Bone Drilling Simulator

TissueDB/Simulators/Long Bone Drilling Simulator — captured revision 1296542; 2 rows.

View row-by-row proposals

Stabiliser — demonstrated bamboo variant

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	Sufficient to hold the bone analogue securely	As needed
Notes	Clay holds the bamboo bone analogue on a hard, flat surface during drilling. It is a stabiliser and has no anatomical target.	Clay holds the bamboo bone analogue on a hard, flat surface during drilling. It is a stabiliser and has no anatomical target. The amount must be sufficient to hold the bone analogue securely.

Stabiliser — demonstrated PPR-pipe variant

Structural Parts, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	Sufficient to hold the bone analogue securely	As needed
Notes	Play-dough holds the PPR-pipe bone analogue on a hard, flat surface during drilling. It is a stabiliser and has no anatomical target.	Play-dough holds the PPR-pipe bone analogue on a hard, flat surface during drilling. It is a stabiliser and has no anatomical target. The amount must be sufficient to hold the bone analogue securely.

Lumbar Laminectomy and Dural Closure Simulator (Bakhshi)

TissueDB/Simulators/Lumbar Laminectomy and Dural Closure Simulator (Bakhshi) — captured revision 1296598; 1 row.

View row-by-row proposals

Bone

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 L1–S1 spine model	1 model
Notes	The source explicitly describes a saw-bone L1–S1 spine model used for laminectomy. The lamina is removed during the simulated procedure. The source does not identify a manufacturer or polymer composition for the saw-bone material.	The source explicitly describes a saw-bone L1–S1 spine model used for laminectomy. The lamina is removed during the simulated procedure. The source does not identify a manufacturer or polymer composition for the saw-bone material.

Multipurpose Thoracic Simulator (Carter)

TissueDB/Simulators/Multipurpose Thoracic Simulator (Carter) — captured revision 1296566; 1 row.

View row-by-row proposals

Bone (ribs)

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 rack (4–5 rib segment)	1 rack
Notes	Provides the rib landmarks and intercostal spaces for needle and chest-tube entry above a rib at both stations.	Provides the rib landmarks and intercostal spaces for needle and chest-tube entry above a rib at both stations. Rack includes a 4–5-rib segment.

Neonatal ETT Ultrasound Simulator (Qaim Ali)

TissueDB/Simulators/Neonatal ETT Ultrasound Simulator (Qaim Ali) — captured revision 1296635; 1 row.

View row-by-row proposals

Gelatin lumen plug

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 retained plug	1
Notes	The gelatin cylinder expelled while coring a lumen is retained for use in changing the esophageal lumen configuration. It is a simulator configuration component rather than a separate anatomical tissue.	The gelatin cylinder expelled while coring a lumen is retained for use in changing the esophageal lumen configuration. It is a simulator configuration component rather than a separate anatomical tissue.

Paediatric Airway Management Trainer (Carter)

TissueDB/Simulators/Paediatric Airway Management Trainer (Carter) — captured revision 1296584; 2 rows.

View row-by-row proposals

Trachea

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Printed in Stratasys Agilus30 on a Stratasys Polyjet J750 (14-micron layers). Paediatric trachea printed from CT data of a 4 kg five-month-old infant. The print extends to the carina, and rigid bronchoscopy shows that extent. Carter 2020 selected Agilus30 for greater tissue fidelity.	Printed in Stratasys Agilus30 on a Stratasys Polyjet J750 (14-micron layers). Paediatric trachea printed from CT data of a 4 kg five-month-old infant. The print extends to the carina, and rigid bronchoscopy shows that extent. Carter 2020 selected Agilus30 for greater tissue fidelity. Integrated component of the existing anatomical model; not a separate material order.

Exact source and preserved reference markers

CAPTURED
Quantity: 1 integrated
Notes: Printed in Stratasys Agilus30<ref name="stratasys_agilus30" /> on a Stratasys Polyjet J750 (14-micron layers). Paediatric trachea printed from CT data of a 4&nbsp;kg five-month-old infant. The print extends to the carina, and rigid bronchoscopy shows that extent. Carter 2020 selected Agilus30 for greater tissue fidelity.

PROPOSED
Quantity: 1
Notes: Printed in Stratasys Agilus30<ref name="stratasys_agilus30" /> on a Stratasys Polyjet J750 (14-micron layers). Paediatric trachea printed from CT data of a 4&nbsp;kg five-month-old infant. The print extends to the carina, and rigid bronchoscopy shows that extent. Carter 2020 selected Agilus30 for greater tissue fidelity. Integrated component of the existing anatomical model; not a separate material order.

Bronchial tissue (carina)

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 integrated	1
Notes	Stratasys Agilus30 on the same Stratasys Polyjet J750 print. The carina at the tracheal bifurcation, part of the single-object airway model. A consultant otolaryngologist recorded the carinal view on rigid bronchoscopy (Carter 2020).	Stratasys Agilus30 on the same Stratasys Polyjet J750 print. The carina at the tracheal bifurcation, part of the single-object airway model. A consultant otolaryngologist recorded the carinal view on rigid bronchoscopy (Carter 2020).

Pediatric Forearm Fracture Simulator

TissueDB/Simulators/Pediatric Forearm Fracture Simulator — captured revision 1283569; 1 row.

View row-by-row proposals

Bone

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 forearm bone model per simulator; 6 models per training set	1 per simulator
Notes	3D-printed pediatric-female radius-and-ulna models. White PLA models are used for unblinded training and black PLA models for blinded training. The numbered models represent no-fracture, buckle (torus) and fracture variants.	3D-printed pediatric-female radius-and-ulna models. White PLA models are used for unblinded training and black PLA models for blinded training. The numbered models represent no-fracture, buckle (torus) and fracture variants. Six forearm bone models make up one training set.

Pediatric Front-of-Neck Access Simulator (Kovatch)

TissueDB/Simulators/Pediatric Front-of-Neck Access Simulator (Kovatch) — captured revision 1296636; 4 rows.

View row-by-row proposals

Trachea

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 (silicone cast)	1
Notes	The source used medical-grade silicone, Shore 45. CT-derived child-sized airway: a single molded silicone tracheal model on which the laryngeal cartilages, palpable tracheal rings and cricothyroid membrane are felt as landmarks.	The source used medical-grade silicone, Shore 45. CT-derived child-sized airway: a single molded silicone tracheal model on which the laryngeal cartilages, palpable tracheal rings and cricothyroid membrane are felt as landmarks.

Cricothyroid membrane

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 (integral)	1
Notes	The procedural target for needle cricothyroidotomy; felt and punctured on the single silicone tracheal model, not a separate part.	The procedural target for needle cricothyroidotomy; felt and punctured on the single silicone tracheal model, not a separate part.

Thyroid cartilage

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 (integral)	1
Notes	Palpable laryngeal landmark above the cricothyroid membrane, on the single silicone tracheal model.	Palpable laryngeal landmark above the cricothyroid membrane, on the single silicone tracheal model.

Cricoid cartilage

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 (integral)	1
Notes	Palpable laryngeal landmark below the cricothyroid membrane, on the single silicone tracheal model.	Palpable laryngeal landmark below the cricothyroid membrane, on the single silicone tracheal model.

Pediatric Mid-Forearm Closed Reduction Simulator

TissueDB/Simulators/Pediatric Mid-Forearm Closed Reduction Simulator — captured revision 1292841; 1 row.

View row-by-row proposals

Bone

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	3 (humerus, ulna, radius)	3
Notes	Made by Pacific Research Lab – Sawbones. Radiolucent bones with articular movements. The fracture is in the middle third of the forearm. The synthetic bone material is friable.	Made by Pacific Research Lab – Sawbones. Radiolucent bones with articular movements. The fracture is in the middle third of the forearm. The synthetic bone material is friable. One humerus, one ulna and one radius.

Peripheral Intravenous Catheterization Trainer

TissueDB/Simulators/Peripheral Intravenous Catheterization Trainer — captured revision 1296607; 3 rows.

View row-by-row proposals

Subcutaneous tissue

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	Enough to cover the whole noodle	As needed
Notes	Palpable layer over the simulated vein. Glad Press'n Seal or equivalent.	Palpable layer over the simulated vein. Glad Press'n Seal or equivalent. Amount sufficient to cover the whole noodle.

Blood (simulated)

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	Enough to prime the tubing and bag	As needed
Notes	Flashback fluid for the simulated vein. The optional food coloring is red.	Flashback fluid for the simulated vein. The optional food coloring is red. Amount sufficient to prime the tubing and bag.

IV fluid bag (IVPB)

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 bag, any size	1 bag
Notes	Gravity-fed fluid reservoir.	Gravity-fed fluid reservoir. Any bag size.

Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller)

TissueDB/Simulators/Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller) — captured revision 1296628; 2 rows.

View row-by-row proposals

Common iliac arteries

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	2 segments (right and left)	2 segments
Notes	1.3 cm inner diameter. Joined with polymer connectors at branches/bifurcations and size transitions.	1.3 cm inner diameter. Joined with polymer connectors at branches/bifurcations and size transitions. One right and one left segment.

Common femoral arteries

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	2 segments (right and left)	2 segments
Notes	1.3 cm inner diameter. Right common femoral artery for arterial access. Left common femoral artery for distal pressure monitoring and the take-off for the pump-return branch.	1.3 cm inner diameter. Right common femoral artery for arterial access. Left common femoral artery for distal pressure monitoring and the take-off for the pump-return branch. One right and one left segment.

Soft Tissue Lesion Simulator

TissueDB/Simulators/Soft Tissue Lesion Simulator — captured revision 1296600; 7 rows.

View row-by-row proposals

Skin

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 per model (abscess, nodule and wound)	1 per model
Notes	The source names this layer "skin". In the abscess and nodule models the skin is felt covered with clear packing tape; the tape gives a firm surface for the incision and holds the layers together. The wound model uses a large sponge as both surface and depth, with no felt, tape or gelatin. Per-material costs: felt $0.17 per model, tape $0.03 per model, sponge $0.63. The cost shown is the total for the three models.	The source names this layer "skin". In the abscess and nodule models the skin is felt covered with clear packing tape; the tape gives a firm surface for the incision and holds the layers together. The wound model uses a large sponge as both surface and depth, with no felt, tape or gelatin. Per-material costs: felt $0.17 per model, tape $0.03 per model, sponge $0.63. The cost shown is the total for the three models.

Subcutaneous tissue

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 per model (abscess and nodule)	1 per model
Notes	The source names the gelatin layer "subcutaneous tissues"; the gelatin is pigmented, and it needs refrigeration. The thick small sponge base sits under the gelatin; air inside the sponge produces ultrasound artefacts that do not occur in living tissue. Per-material costs: gelatin $0.40 (abscess) and $0.34 (nodule), sponge $0.50 per model. The cost shown is the total for the two models.	The source names the gelatin layer "subcutaneous tissues"; the gelatin is pigmented, and it needs refrigeration. The thick small sponge base sits under the gelatin; air inside the sponge produces ultrasound artefacts that do not occur in living tissue. Per-material costs: gelatin $0.40 (abscess) and $0.34 (nodule), sponge $0.50 per model. The cost shown is the total for the two models.

Blood

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 (wound model)	1
Notes	The source says the wound model "was painted with red liquid latex to represent blood". Paint is listed beside the liquid latex in the source's cost table for the wound model. Per-material costs: latex $0.36, paint $0.14.	The source says the wound model "was painted with red liquid latex to represent blood". Paint is listed beside the liquid latex in the source's cost table for the wound model. Per-material costs: latex $0.36, paint $0.14.

Pus

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 (abscess model)	1
Notes	The filling for the glove fingertip that forms the abscess. The source fills the fingertip with basic body lotion "to represent the abscess", and it is what the learner drains.	The filling for the glove fingertip that forms the abscess. The source fills the fingertip with basic body lotion "to represent the abscess", and it is what the learner drains.

Abscess

Tissues, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	1 (abscess model)	1
Notes	Knotted at the top. It is what the handheld ultrasound detects, and it is what the learner incises and drains.	Knotted at the top. It is what the handheld ultrasound detects, and it is what the learner incises and drains. Applies to the abscess model.

Subcutaneous nodule

Tissues, source row 6. Captured revision

Field	Captured value	Proposed value
Quantity	1 (nodule model)	1
Notes	A small, solid lesion. It takes the place of the lotion-filled fingertip; everything else about the model is identical.	A small, solid lesion. It takes the place of the lotion-filled fingertip; everything else about the model is identical. Applies to the nodule model.

Wound debris

Tissues, source row 7. Captured revision

Field	Captured value	Proposed value
Quantity	1 (wound model)	1
Notes	They are what the learner removes during debridement.	They are what the learner removes during debridement. Applies to the wound model.

Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar)

TissueDB/Simulators/Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar) — captured revision 1285559; 5 rows.

View row-by-row proposals

Oral cavity

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 (manikin)	1
Notes	Life-like oral cavity.	Life-like oral cavity. Part of the manikin.

Hypopharynx

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 (manikin)	1
Notes	Life-like hypopharynx.	Life-like hypopharynx. Part of the manikin.

Trachea

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 (manikin)	1
Notes	Life-like laryngeal inlet, with the esophagus behind the trachea.	Life-like laryngeal inlet, with the esophagus behind the trachea. Part of the manikin.

Stomach

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1 (manikin)	1
Notes	The contaminant reservoir, modified with two PVC tubes and two zip ties. Tube-B drains the stomach. The stomach is not removed from the manikin.	The contaminant reservoir, modified with two PVC tubes and two zip ties. Tube-B drains the stomach. The stomach is not removed from the manikin.

Esophagus

Tissues, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	1 (manikin)	1
Notes	Life-like esophagus, behind the trachea; the regurgitation path from the stomach to the hypopharynx. Tube-A delivers contaminant at the upper end of the esophagus.	Life-like esophagus, behind the trachea; the regurgitation path from the stomach to the hypopharynx. Tube-A delivers contaminant at the upper end of the esophagus. Part of the manikin.

Suturing Simulator (Kumaresan)

TissueDB/Simulators/Suturing Simulator (Kumaresan) — captured revision 1292949; 1 row.

View row-by-row proposals

Limb

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 thin layer	1 layer
Notes	Forms the firm, flexible base of the pad.	Forms the firm, flexible base of the pad. Thin layer.

Synthetic Tourniquet Training Model (Souza Lima)

TissueDB/Simulators/Synthetic Tourniquet Training Model (Souza Lima) — captured revision 1296592; 1 row.

View row-by-row proposals

Skin

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 sheet (60 × 40 cm)	1 sheet
Notes	Ethylene-vinyl acetate sheet coating the leg exterior to simulate the skin layer.	Ethylene-vinyl acetate sheet coating the leg exterior to simulate the skin layer. Sheet size: 60 × 40 cm.

Thermal Ablation Simulator

TissueDB/Simulators/Thermal Ablation Simulator — captured revision 1296521; 2 rows.

View row-by-row proposals

Cold probe tips

Structural Parts, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	2 (16 mm + 19 mm)	2
Notes	Flat circular tips; tape covering prevents sticking to clay cervix model	Flat circular tips; tape covering prevents sticking to clay cervix model. Tip sizes: 16 mm and 19 mm.

Hot probe tips

Structural Parts, source row 5. Captured revision

Field	Captured value	Proposed value
Quantity	2 (19 mm + 25 mm)	2
Notes	Flat circular tips; hot probes leave an impression on clay cervix model	Flat circular tips; hot probes leave an impression on clay cervix model. Tip sizes: 19 mm and 25 mm.

Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness)

TissueDB/Simulators/Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness) — captured revision 1296638; 1 row.

View row-by-row proposals

Skin

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 overlay; replaced between trainees	1 overlay
Notes	Silicone-rubber overlay covering the apparatus. It provides the external access surface and is replaced between trainees. The source reported a realism rating of 3.88/5 for the skin component.	Silicone-rubber overlay covering the apparatus. It provides the external access surface and is replaced between trainees. The source reported a realism rating of 3.88/5 for the skin component.

Trocar Placement Simulator

TissueDB/Simulators/Trocar Placement Simulator — captured revision 1296616; 1 row.

View row-by-row proposals

Muscle

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	2 pieces; approximately 15.25 cm × 5 cm (6 × 2 in) each	2 pieces
Notes	Red felt represents muscle.	Red felt represents muscle. Each piece is approximately 15.25 cm × 5 cm (6 × 2 in).

Urinary Catheterization Simulator (Gillis)

TissueDB/Simulators/Urinary Catheterization Simulator (Gillis) — captured revision 1296641; 5 rows.

View row-by-row proposals

Bladder

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	PLA-printed bladder body and base (1)	1
Notes	Holds water during catheter passage; the acrylic front window lets learners and instructors confirm catheter advancement past the valve, balloon inflation, and seating position visually. It is reusable.	Holds water during catheter passage; the acrylic front window lets learners and instructors confirm catheter advancement past the valve, balloon inflation, and seating position visually. It is reusable. PLA-printed bladder body and base.

Bladder neck

Tissues, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	One-way valve and threaded insert, SLA-printed (1 each)	1 each
Notes	Formlabs Grey Pro resin. The screw-in valve body sits in the threaded insert at the bladder base and provides the mechanical sphincter feedback during catheter passage.	Formlabs Grey Pro resin. The screw-in valve body sits in the threaded insert at the bladder base and provides the mechanical sphincter feedback during catheter passage. One-way valve and threaded insert, both SLA-printed.

Urethra

Tissues, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 length; approximately 178 mm long	1 length
Notes	7 mm internal diameter. The proximal seal to the valve is the path along which the catheter encounters the mechanical sphincter feedback. It is reusable until perforation.	7 mm internal diameter. The proximal seal to the valve is the path along which the catheter encounters the mechanical sphincter feedback. It is reusable until perforation. Approximately 178 mm long.

Exact source and preserved reference markers

CAPTURED
Quantity: 1 length; approximately 178 mm long<ref name="gillis_fig1">Gillis et al. (2020), Figure 1: the dimensioned model drawing.</ref>
Notes: 7 mm internal diameter.<ref name="gillis_fig1" /> The proximal seal to the valve is the path along which the catheter encounters the mechanical sphincter feedback. It is reusable until perforation.

PROPOSED
Quantity: 1 length
Notes: 7 mm internal diameter.<ref name="gillis_fig1" /> The proximal seal to the valve is the path along which the catheter encounters the mechanical sphincter feedback. It is reusable until perforation. Approximately 178 mm long.<ref name="gillis_fig1">Gillis et al. (2020), Figure 1: the dimensioned model drawing.</ref>

Penis

Tissues, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	Silicone external-genitalia cast (1)	1
Notes	Source material: Smooth-On 00-30 silicone (Shore 00-30 durometer), soft enough for the operator to grip, retract, and angulate the penile shaft during insertion; cast geometry is not parameter-quantified in the source. It is reusable.	Source material: Smooth-On 00-30 silicone (Shore 00-30 durometer), soft enough for the operator to grip, retract, and angulate the penile shaft during insertion; cast geometry is not parameter-quantified in the source. It is reusable. Silicone external-genitalia cast.

Front viewing window

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1 piece per unit, cut to the bladder frontal aspect	1 piece per unit
Notes	Forms the transparent front window of the bladder for visual confirmation of catheter advancement and balloon inflation.	Forms the transparent front window of the bladder for visual confirmation of catheter advancement and balloon inflation. Piece cut to match the bladder frontal aspect.

Vascular Anastomosis Simulator (Cubas)

TissueDB/Simulators/Vascular Anastomosis Simulator (Cubas) — captured revision 1296562; 2 rows.

View row-by-row proposals

Blood vessel

Tissues, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	2 per anastomosis; each 15 cm long	2 per anastomosis
Notes	2–3 mm lumen. Stand-in for the size and arrangement of small-calibre vascular grafts.	2–3 mm lumen. Stand-in for the size and arrangement of small-calibre vascular grafts.. Each segment is 15 cm long.

Exact source and preserved reference markers

CAPTURED
Quantity: 2 per anastomosis; each 15 cm long
Notes: 2–3 mm lumen. Stand-in for the size and arrangement of small-calibre vascular grafts.<ref name="cubas_2022" />

PROPOSED
Quantity: 2 per anastomosis
Notes: 2–3 mm lumen. Stand-in for the size and arrangement of small-calibre vascular grafts.<ref name="cubas_2022" />. Each segment is 15 cm long.

Plastic container with lid

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	1; 30 × 15 × 10 cm	1
Notes	Houses the frame and the straws; its lid lets the trainer be carried.	Houses the frame and the straws; its lid lets the trainer be carried. 30 × 15 × 10 cm.

VesselBox Vessel Ligation Trainer (Hu)

TissueDB/Simulators/VesselBox Vessel Ligation Trainer (Hu) — captured revision 1285625; 1 row.

View row-by-row proposals

3-0 silk suture tie

Consumables, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	2 per ligation (both ends); ~2 ligations per glove finger	2 per ligation
Notes	Hu et al. 2015 used 3-0 silk ties (Hefei Fast Nonwoven Products Co, Anhui, China); with reused expired gloves, silk is the dominant per-attempt consumable. The price is per tie.	Hu et al. 2015 used 3-0 silk ties (Hefei Fast Nonwoven Products Co, Anhui, China); with reused expired gloves, silk is the dominant per-attempt consumable. The price is per tie. One tie at each end; approximately two ligations per glove finger.

Wound Packing Simulator

TissueDB/Simulators/Wound Packing Simulator — captured revision 1296015; 5 rows.

View row-by-row proposals

Wood pieces (W-1, W-2, W-3, W-4, W-5, W-7)

Structural Parts, source row 1. Captured revision

Field	Captured value	Proposed value
Quantity	16 pieces in six lengths (W-1 300 mm ×4; W-2 150 mm ×4; W-3 240 mm ×1; W-4 500 mm ×2; W-5 175 mm ×4; W-7 240 mm ×1; 10 mm thick)	16
Notes	Shared with the Tourniquet Simulator.	Shared with the Tourniquet Simulator. All pieces are 10 mm thick. W-1: 4 pieces, each 300 mm long; W-2: 4 pieces, each 150 mm long; W-3: 1 piece, 240 mm long; W-4: 2 pieces, each 500 mm long; W-5: 4 pieces, each 175 mm long; W-7: 1 piece, 240 mm long.

Source caveat: W-5 is 175 mm in the page/diagram but 17 cm in the source table; preserve the existing 175 mm pending resolution. Six part codes include only five distinct lengths; remove the inaccurate “six lengths” wording.

Base board (W-6)

Structural Parts, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1 (600 × 400 × 10 mm)	1
Notes	Mounting base. The source shopping list (Section 1.1) names it "Wood slice".	Mounting base. 600 × 400 × 10 mm. The source shopping list (Section 1.1) names it "Wood slice".

Pressure channel pipe (PVC-2)

Structural Parts, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	1 (30 cm length)	1
Notes	Internal pressure channel; ½ in pipe.	Internal pressure channel; ½ in pipe, 30 cm long.

Compression spring (R-1)

Structural Parts, source row 13. Captured revision

Field	Captured value	Proposed value
Quantity	1 × 30 cm spring, cut into four 4 cm segments (16 cm used); 4.0 mm diameter	1
Notes	Compression mechanism.	Compression mechanism. One 30 cm stock spring, 4.0 mm diameter; four 4 cm segments are used (16 cm total). See Preparation for the cutting step.

Hose securing ties

Structural Parts, source row 17. Captured revision

Field	Captured value	Proposed value
Quantity	1 bag (10)	1 bag
Notes	Used to secure the hose along the frame, holding it in place without crimping it.	Used to secure the hose along the frame, holding it in place without crimping it. The source shopping list specifies one bag containing 10 ties; it does not state the number used.

Z-Plasty Simulator

TissueDB/Simulators/Z-Plasty Simulator — captured revision 1285566; 6 rows.

View row-by-row proposals

Skin (epidermis + dermis)

Tissues, source row 7. Captured revision

Field	Captured value	Proposed value
Quantity	2 pieces (12 cm × 12 cm × 2 mm)	2 pieces
Notes	Two different colours to distinguish dermis and epidermis layers. Elasticity should match webbing between thumb and index finger.	Two different colours to distinguish dermis and epidermis layers. Elasticity should match webbing between thumb and index finger. Each piece is 12 cm × 12 cm × 2 mm.

Fascia

Tissues, source row 8. Captured revision

Field	Captured value	Proposed value
Quantity	1 piece (12 cm × 12 cm × 2 mm)	1 piece
Notes	Additional foam layer representing the fascial plane beneath soft tissue.	Additional foam layer representing the fascial plane beneath soft tissue. 12 cm × 12 cm × 2 mm.

Subcutaneous soft tissue

Tissues, source row 9. Captured revision

Field	Captured value	Proposed value
Quantity	1–2 sheets (12 cm × 12 cm)	1–2 sheets
Notes	Placed between skin layers and fascia layer. Represents the soft tissue requiring dissection above the fascia prior to flap opposition. Cotton cleaning pads are a suitable source.	Placed between skin layers and fascia layer. Represents the soft tissue requiring dissection above the fascia prior to flap opposition. Cotton cleaning pads are a suitable source. Each sheet is 12 cm × 12 cm.

Wood block (foundation)

Structural Parts, source row 2. Captured revision

Field	Captured value	Proposed value
Quantity	1; 15 cm × 15 cm	1
Notes	Foundation for the platform; thick enough to hold the screws or nails (size given in the build steps).	Foundation for the platform; thick enough to hold the screws or nails (size given in the build steps). 15 cm × 15 cm.

Fasteners (pegs)

Structural Parts, source row 3. Captured revision

Field	Captured value	Proposed value
Quantity	10 (5 per opposing sides)	10
Notes	Pegs that hold the rubber bands; equally spaced and aligned with the fasteners on the opposite side.	Pegs that hold the rubber bands; equally spaced and aligned with the fasteners on the opposite side. Five fasteners on each of two opposing sides.

Cardboard tube

Structural Parts, source row 4. Captured revision

Field	Captured value	Proposed value
Quantity	1; 12–15 cm length	1
Notes	Creates a curved surface to enhance flap simulation. Sources: toilet paper, gift wrapping, textile, or paper towel rolls.	Creates a curved surface to enhance flap simulation. Sources: toilet paper, gift wrapping, textile, or paper towel rolls. 12–15 cm long.

39 source-review holds

These comprise 13 formatting corrections with unresolved basis and 26 other source-review cases. Tentative values are review prompts, not approved replacements. No held row is included in a proposed page patch.

Bronchoscopy Anatomical Trainer (Di Domenico)

TissueDB/Simulators/Bronchoscopy Anatomical Trainer (Di Domenico) — captured revision 1285522; 2 rows.

View row-by-row proposals

Bronchus

Tissues, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	All segments	All segments
Notes	All bronchial segments, labelled per the international classification; endoscopic-view correspondence with patient anatomy shown at three bifurcations.	All bronchial segments, labelled per the international classification; endoscopic-view correspondence with patient anatomy shown at three bifurcations.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Tree-to-base fixation

Structural Parts, source row 5. Captured revision

Field	Captured value	Tentative value — held
Quantity	Multiple	Multiple
Notes	Hold the bronchial tree on the base supports.	Hold the bronchial tree on the base supports.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Chest Tube Insertion Simulator (Brannan)

TissueDB/Simulators/Chest Tube Insertion Simulator (Brannan) — captured revision 1281788; 2 rows.

View row-by-row proposals

Skin

Tissues, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	1 overlay (1200 g) + 1 replaceable patch (100 g)	1 overlay + 1 patch
Notes	Top layer Smooth-On Ecoflex 00-30; innermost layer Smooth-On Dragon Skin 10. Three-layer silicone laminate with a small replaceable patch, allowing repeated use between learners. The source's per-gram price includes shipping, tax and an estimated 15% wastage.	Top layer Smooth-On Ecoflex 00-30; innermost layer Smooth-On Dragon Skin 10. Three-layer silicone laminate with a small replaceable patch, allowing repeated use between learners. The source's per-gram price includes shipping, tax and an estimated 15% wastage. Overlay: 1200 g; replaceable patch: 100 g.

Two distinct skin components are explicitly counted. Retain those separate counts; review whether this should remain one row or be split rather than inventing a set or losing the component basis.

Flexible joints (rib–sternum and rib–spine)

Tissues, source row 6. Captured revision

Field	Captured value	Tentative value — held
Quantity	118 g TPE 90A + 86 g PVA support	118 g TPE 90A + 86 g PVA support
Notes	Grade TPE 90A. Flexible joints between the ribs and the sternum and between the ribs and the spine, where flexibility was required. The source does not state how many joints were printed.	Grade TPE 90A. Flexible joints between the ribs and the sternum and between the ribs and the spine, where flexibility was required. The source does not state how many joints were printed.

Two distinct material amounts are provided, but no count of printed joints. Preserve both amounts pending a decision about row basis or separate materials; do not manufacture a joint count or collapse the two materials into one unsupported quantity.

Cricothyrotomy Simulator (Calvo)

TissueDB/Simulators/Cricothyrotomy Simulator (Calvo) — captured revision 1296630; 1 row.

View row-by-row proposals

Blood

Tissues, source row 7. Captured revision

Field	Captured value	Tentative value — held
Quantity	1 L reservoir	1 L
Notes	The original REAL CRIC concept includes simulated bleeding. Calvo et al. modify its delivery by mounting the red-stained saline bag in a pressuriser, providing greater and more constant pressure while freeing the instructor's hands.	The original REAL CRIC concept includes simulated bleeding. Calvo et al. modify its delivery by mounting the red-stained saline bag in a pressuriser, providing greater and more constant pressure while freeing the instructor's hands. Reservoir volume: 1 L.

Confirm whether 1 L states reservoir capacity or actual fluid fill. The existing wording does not by itself establish the required fluid amount.

Cricothyrotomy Simulator (Kei)

TissueDB/Simulators/Cricothyrotomy Simulator (Kei) — captured revision 1296556; 1 row.

View row-by-row proposals

Blood

Tissues, source row 7. Captured revision

Field	Captured value	Tentative value — held
Quantity	1 L reservoir per session	1 L per session
Notes	Red-dyed. Dual role: the subcutaneous weal under the skin and the reservoir feeding the IV-tubing vessel. Bleeds when the skin is incised.	Red-dyed. Dual role: the subcutaneous weal under the skin and the reservoir feeding the IV-tubing vessel. Bleeds when the skin is incised. A 1 L reservoir is specified per session.

Confirm whether 1 L states reservoir capacity or actual fluid fill. Preserve the per-session basis; do not silently equate capacity with fill amount.

Emergency Department Thoracotomy Simulator (Misra)

TissueDB/Simulators/Emergency Department Thoracotomy Simulator (Misra) — captured revision 1296064; 2 rows.

View row-by-row proposals

Subcutaneous fat

Tissues, source row 6. Captured revision

Field	Captured value	Tentative value — held
Quantity	10 pairs per gallon of plastisol	—
Notes	Sits beneath the skin and, with it, forms the resealable chest-wall surface; made for rapid replacement between residents. Coloured with a fat-colour plastisol colourant.	Sits beneath the skin and, with it, forms the resealable chest-wall surface; made for rapid replacement between residents. Coloured with a fat-colour plastisol colourant. Yield: 10 skin/fat pairs per gallon of plastisol.

This is a batch yield, not an explicit per-simulator requirement. Preserve the yield in Notes and verify the intended Quantity basis before substituting a count.

Skin

Tissues, source row 7. Captured revision

Field	Captured value	Tentative value — held
Quantity	10 pairs per gallon of plastisol	—
Notes	Cutaneous surface for thoracotomy entry over the rib-set anchor area; paired skin/fat sheets allow quick replacement. One gallon of Bait Plastics LLC medium-density plastisol (US$50) makes 10 skin/fat pairs plus two lung/heart sets; two 4 oz plastisol colourants (skin, fat; US$15) tint it.	Cutaneous surface for thoracotomy entry over the rib-set anchor area; paired skin/fat sheets allow quick replacement. One gallon of Bait Plastics LLC medium-density plastisol (US$50) makes 10 skin/fat pairs plus two lung/heart sets; two 4 oz plastisol colourants (skin, fat; US$15) tint it.

This is a batch yield, not an explicit per-simulator requirement. Preserve the yield in Notes and verify the intended Quantity basis before substituting a count.

Grapefruit Distal Anterior Cerebral Artery Bypass Simulator

TissueDB/Simulators/Grapefruit Distal Anterior Cerebral Artery Bypass Simulator — captured revision 1296564; 1 row.

View row-by-row proposals

Leak-indicator dye

Consumables, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	Trace	Trace
Notes	Added to the reservoir water to make leakage from the anastomosis visible. Colour: red.	Added to the reservoir water to make leakage from the anastomosis visible. Colour: red.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Humeral Fracture Fixation Simulator

TissueDB/Simulators/Humeral Fracture Fixation Simulator — captured revision 1285552; 1 row.

View row-by-row proposals

Cancellous Bone

Tissues, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	Integrated into models	—
Notes	Internal cancellous porosity simulated by 15% Tri-Hexagon infill, exposed at the fracture ends by setting the top layers to 0	Internal cancellous porosity simulated by 15% Tri-Hexagon infill, exposed at the fracture ends by setting the top layers to 0. Integrated into the models; not a separate material order.

Integration describes construction, not a count. No separate quantity is stated.

IUD Insertion Simulator

TissueDB/Simulators/IUD Insertion Simulator — captured revision 1294521; 1 row.

View row-by-row proposals

Circuit connectors

Structural Parts, source row 5. Captured revision

Field	Captured value	Tentative value — held
Quantity	Minimum 4 for the source costed build; otherwise as needed	Minimum 4
Notes	Connect the foil lining, buzzer and battery. One lead connects to the metal uterine sound.	Connect the foil lining, buzzer and battery. One lead connects to the metal uterine sound. The minimum of four applies to the source-costed build; other builds require an as-needed amount.

Conditional quantity: confirm the page is describing the source-costed build before using the minimum-four value as the default.

Injection Laryngoplasty Simulator (Lee)

TissueDB/Simulators/Injection Laryngoplasty Simulator (Lee) — captured revision 1296574; 1 row.

View row-by-row proposals

Framework supports

Structural Parts, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	Integrated into the framework	—
Notes	Support material between the hyoid bone, thyroid cartilage and cricoid cartilage reinforces the framework without interfering with injections. Posterior support holds the silicone insert in position during injection. The supports are printed as part of the framework; no separate cost is reported.	Support material between the hyoid bone, thyroid cartilage and cricoid cartilage reinforces the framework without interfering with injections. Posterior support holds the silicone insert in position during injection. The supports are printed as part of the framework; no separate cost is reported.

No separate component count is specified.

Exact source and preserved reference markers

CAPTURED
Quantity: Integrated into the framework
Notes: Support material between the hyoid bone, thyroid cartilage and cricoid cartilage reinforces the framework without interfering with injections. Posterior support holds the silicone insert in position during injection. The supports are printed as part of the framework; no separate cost is reported.<ref name="lee2021" />

PROPOSED
Quantity: —
Notes: Support material between the hyoid bone, thyroid cartilage and cricoid cartilage reinforces the framework without interfering with injections. Posterior support holds the silicone insert in position during injection. The supports are printed as part of the framework; no separate cost is reported.<ref name="lee2021" />

Intra-abdominal Bleeding Simulator (Fernandes)

TissueDB/Simulators/Intra-abdominal Bleeding Simulator (Fernandes) — captured revision 1296633; 1 row.

View row-by-row proposals

Blood

Tissues, source row 13. Captured revision

Field	Captured value	Tentative value — held
Quantity	Two 1-litre reservoir systems	2 reservoirs
Notes	Simulated circulating fluid used in the aorta and inferior vena cava. The dye is artificial red dye.	Simulated circulating fluid used in the aorta and inferior vena cava. The dye is artificial red dye. Two reservoir systems, each with a 1-litre volume.

The row represents blood but the stated quantity counts reservoir systems. Retain that basis; verify whether the intended requirement is reservoir count, fluid fill amount, or capacity before changing to a total fluid volume.

Laparoscopic Box Trainer Simulator

TissueDB/Simulators/Laparoscopic Box Trainer Simulator — captured revision 1296620; 1 row.

View row-by-row proposals

Printer

HTML table 1, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	Access to	—
Description and Notes	Used to print the A4 or US Letter cutting templates.	Used to print the A4 or US Letter cutting templates. Access to a printer is needed.

Availability is stated, but no count. Preserve the requirement in the existing Description and Notes column and do not infer one printer.

Laparoscopic Cholecystectomy Simulator (Casas-Murillo)

TissueDB/Simulators/Laparoscopic Cholecystectomy Simulator (Casas-Murillo) — captured revision 1296075; 3 rows.

View row-by-row proposals

Bile Duct

Tissues, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	1 (normal + 3 variants)	1
Notes	The source used P53 silicone rubber. Cast continuous with the gallbladder. Covers one normal cystic-duct anatomy plus three insertion variants.	The source used P53 silicone rubber. Cast continuous with the gallbladder. Covers one normal cystic-duct anatomy plus three insertion variants.

The four design variants are not evidence that four models are required for one build. Preserve current count 1 and verify its basis.

Connective Tissue

Tissues, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	Multiple layers (≈142 cc)	≈142 cc
Notes	The source used yellow Elmer's Slime. Represents the hepatoduodenal ligament, the gallbladder-neck attachment to the liver and the tissue between the cystic artery and duct, which the trainee dissects. Keep it at 25 °C or cooler or it melts.	The source used yellow Elmer's Slime. Represents the hepatoduodenal ligament, the gallbladder-neck attachment to the liver and the tissue between the cystic artery and duct, which the trainee dissects. Keep it at 25 °C or cooler or it melts. Applied in multiple layers.

The volume is stated, but the number of layers is not. Proposed Quantity preserves the material volume; verify it is the required amount for this model rather than package capacity.

Assembly fasteners

Structural Parts, source row 6. Captured revision

Field	Captured value	Tentative value — held
Quantity	Set	Set
Notes	Not priced in the source, so they are not in the cost total. They fix the moulds and casts in surgical position; the cystic artery is fastened to the gallbladder with staples.	Not priced in the source, so they are not in the cost total. They fix the moulds and casts in surgical position; the cystic artery is fastened to the gallbladder with staples.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Laparoscopic Inguinal Hernia Repair Simulator (Kurashima)

TissueDB/Simulators/Laparoscopic Inguinal Hernia Repair Simulator (Kurashima) — captured revision 1296613; 3 rows.

View row-by-row proposals

Abdominal-wall muscle

Tissues, source row 3. Captured revision

Field	Captured value	Tentative value — held
Quantity	Sponge layers	—
Notes	Each muscle sponge layer is wrapped in white stretchy fabric (the Fascia row below).	Each muscle sponge layer is wrapped in white stretchy fabric (the Fascia row below). Sponge layers.

The current cell names the component but gives no layer count.

Fine nerve branches

Tissues, source row 8. Captured revision

Field	Captured value	Tentative value — held
Quantity	Replaced when the model is refreshed	—
Notes	Glued to the pelvic wall. Slender white-putty coils stand in for the fine nerve branches the trainee should preserve.	Glued to the pelvic wall. Slender white-putty coils stand in for the fine nerve branches the trainee should preserve. Replaced when the model is refreshed.

This states a replacement interval but no amount or count.

Laparoscopic tacks

Consumables, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	Variable per fixation	Variable per fixation
Notes	Tacks are the main per-use consumable for mesh fixation.	Tacks are the main per-use consumable for mesh fixation.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Melanoma Excision Simulator (maxSIMhealth)

TissueDB/Simulators/Melanoma Excision Simulator (maxSIMhealth) — captured revision 1283556; 1 row.

View row-by-row proposals

Melanoma lesion(s)

Tissues, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	Multiple (varying shapes, sizes, depths)	Multiple
Notes	Dragon Skin 10 NV (Smooth-On). Cast into melanoma-shaped indents within the skin base. Pigmented with Silc Pig (black/brown).	Dragon Skin 10 NV (Smooth-On). Cast into melanoma-shaped indents within the skin base. Pigmented with Silc Pig (black/brown). Varies in shape, size and depth.

A plurality is stated but no numerical count; preserve the stated variation and verify whether a count is available.

Neonatal Enterocutaneous Anastomosis Simulator

TissueDB/Simulators/Neonatal Enterocutaneous Anastomosis Simulator — captured revision 1296517; 1 row.

View row-by-row proposals

Silk suture

Consumables, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	Varies	Varies
Notes	4-0 or 5-0 silk with a round bodied (tapered) needle. Inexpensive silk sutures suggested for training to maximize affordability. Use 4-0 or 5-0 Vicryl or PDS sutures with round bodied needle for actual procedures on patients.	4-0 or 5-0 silk with a round bodied (tapered) needle. Inexpensive silk sutures suggested for training to maximize affordability. Use 4-0 or 5-0 Vicryl or PDS sutures with round bodied needle for actual procedures on patients.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Open Appendectomy Simulator (Matthews)

TissueDB/Simulators/Open Appendectomy Simulator (Matthews) — captured revision 1283561; 1 row.

View row-by-row proposals

Binder clips

Structural Parts, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	Several	Several
Notes	Hold the abdominal-wall stack against the container rim; carried over between builds.	Hold the abdominal-wall stack against the container rim; carried over between builds.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Pediatric Forearm Fracture Simulator

TissueDB/Simulators/Pediatric Forearm Fracture Simulator — captured revision 1283569; 1 row.

View row-by-row proposals

Food colouring — blinded version only

Consumables, source row 3. Captured revision

Field	Captured value	Tentative value — held
Quantity	40 drops blue + 20 drops red + 20 drops yellow; alternatively 80 drops black	80 drops
Notes	Opacifies the gelatine for blinded ultrasound training. It is an appearance/visibility modifier, not a tissue surrogate.	Opacifies the gelatine for blinded ultrasound training. It is an appearance/visibility modifier, not a tissue surrogate. Colour breakdown: 40 drops blue, 20 drops red and 20 drops yellow; alternative: 80 drops black.

Both listed alternatives total 80 drops. Review the formulation context before replacing the ingredient breakdown with its arithmetic total; all colour amounts remain in Notes.

Pediatric Inguinal Hernia Repair Simulator (Heo)

TissueDB/Simulators/Pediatric Inguinal Hernia Repair Simulator (Heo) — captured revision 1285618; 2 rows.

View row-by-row proposals

Medial umbilical ligaments

Tissues, source row 11. Captured revision

Field	Captured value	Tentative value — held
Quantity	As represented in the cartridge	—
Notes	Source-supported anatomical representation. The source does not specify an exact product-to-target split among the rubber, rope and thread components.	Source-supported anatomical representation. The source does not specify an exact product-to-target split among the rubber, rope and thread components. As represented in the cartridge.

Anatomical representation is stated, but no amount or count.

Epigastric vessels

Tissues, source row 12. Captured revision

Field	Captured value	Tentative value — held
Quantity	As represented in the cartridge	—
Notes	Source-supported vessel representation.	Source-supported vessel representation. As represented in the cartridge.

Anatomical representation is stated, but no amount or count.

Pediatric Laparoscopic Inguinal Hernia Repair Simulator (Duboureau)

TissueDB/Simulators/Pediatric Laparoscopic Inguinal Hernia Repair Simulator (Duboureau) — captured revision 1296590; 1 row.

View row-by-row proposals

Bottle chassis

Structural Parts, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	1 (article: larger than 1 L; illustrated manual: 1 L)	1
Notes	The top (funnel) and base are reassembled into the simulator body after the middle section is discarded. The funnel and neck of this same bottle are tabled above as tissue stand-ins (inguinal canal, internal inguinal ring); this row covers the chassis and base, which hold the assembly and mount it in the trainer box. The neck was selected to mimic the internal inguinal ring. The article specifies a bottle larger than one litre. Its illustrated manual lists a 1 L bottle. The sources therefore differ on bottle capacity. The manual joins the reserved base to the funnel with an elastic loop or balloon tied around the neck and passed through a central hole in the base. The base is then taped to the laparoscopic trainer.	The top (funnel) and base are reassembled into the simulator body after the middle section is discarded. The funnel and neck of this same bottle are tabled above as tissue stand-ins (inguinal canal, internal inguinal ring); this row covers the chassis and base, which hold the assembly and mount it in the trainer box. The neck was selected to mimic the internal inguinal ring. The article specifies a bottle larger than one litre. Its illustrated manual lists a 1 L bottle. The sources therefore differ on bottle capacity. The manual joins the reserved base to the funnel with an elastic loop or balloon tied around the neck and passed through a central hole in the base. The base is then taped to the laparoscopic trainer.

Source disagreement about bottle capacity remains unresolved; moving the specification does not resolve it.

Exact source and preserved reference markers

CAPTURED
Quantity: 1 (article: larger than 1 L; illustrated manual: 1 L)
Notes: The top (funnel) and base are reassembled into the simulator body after the middle section is discarded. The funnel and neck of this same bottle are tabled above as tissue stand-ins (inguinal canal, internal inguinal ring); this row covers the chassis and base, which hold the assembly and mount it in the trainer box. The neck was selected to mimic the internal inguinal ring. The article specifies a bottle larger than one litre.<ref name="duboureau2021" /> Its illustrated manual lists a 1 L bottle. The sources therefore differ on bottle capacity. The manual joins the reserved base to the funnel with an elastic loop or balloon tied around the neck and passed through a central hole in the base. The base is then taped to the laparoscopic trainer.<ref name="duboureau-manual">Duboureau et al. Appendix 1, "A Low-Cost Training Simulator for Laparoscopic Inguinal Hernia Repair in Boys: Instructions for Use". Supplement to [https://doi.org/10.1016/j.jpedsurg.2020.05.044 the original article]. Equipment and Assembling the Model, Step 6.</ref>

PROPOSED
Quantity: 1
Notes: The top (funnel) and base are reassembled into the simulator body after the middle section is discarded. The funnel and neck of this same bottle are tabled above as tissue stand-ins (inguinal canal, internal inguinal ring); this row covers the chassis and base, which hold the assembly and mount it in the trainer box. The neck was selected to mimic the internal inguinal ring. The article specifies a bottle larger than one litre.<ref name="duboureau2021" /> Its illustrated manual lists a 1 L bottle. The sources therefore differ on bottle capacity. The manual joins the reserved base to the funnel with an elastic loop or balloon tied around the neck and passed through a central hole in the base. The base is then taped to the laparoscopic trainer.<ref name="duboureau-manual">Duboureau et al. Appendix 1, "A Low-Cost Training Simulator for Laparoscopic Inguinal Hernia Repair in Boys: Instructions for Use". Supplement to [https://doi.org/10.1016/j.jpedsurg.2020.05.044 the original article]. Equipment and Assembling the Model, Step 6.</ref>

Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller)

TissueDB/Simulators/Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller) — captured revision 1296628; 2 rows.

View row-by-row proposals

Polymer connectors

Structural Parts, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	Several	Several
Notes	Allow transitions between different size tubing and branches/bifurcations within the circuit.	Allow transitions between different size tubing and branches/bifurcations within the circuit.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Three-way stopcocks

Structural Parts, source row 7. Captured revision

Field	Captured value	Tentative value — held
Quantity	Several	Several
Notes	Used for priming the circuit with water and purging air.	Used for priming the circuit with water and purging air.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar)

TissueDB/Simulators/Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar) — captured revision 1285559; 2 rows.

View row-by-row proposals

Blood

Tissues, source row 6. Captured revision

Field	Captured value	Tentative value — held
Quantity	10 g food colouring per 2 litres of water, per fill	10 g per fill
Notes	Red food colouring. An alternative simulated contaminant for the soiled airway.	Red food colouring. An alternative simulated contaminant for the soiled airway. Per fill: 10 g food colouring and 2 litres of water.

This cell combines an ingredient amount and recipe ratio. Preserve both quantities; verify the row basis (food colouring versus the complete blood/vomit mixture) before adopting the single-ingredient Quantity.

Vomit

Tissues, source row 7. Captured revision

Field	Captured value	Tentative value — held
Quantity	10 g food colouring per 2 litres of water, per fill	10 g per fill
Notes	Green food colouring. An alternative simulated contaminant for the soiled airway.	Green food colouring. An alternative simulated contaminant for the soiled airway. Per fill: 10 g food colouring and 2 litres of water.

This cell combines an ingredient amount and recipe ratio. Preserve both quantities; verify the row basis (food colouring versus the complete blood/vomit mixture) before adopting the single-ingredient Quantity.

Superficial Temporal Artery-Middle Cerebral Artery Bypass Trainer

TissueDB/Simulators/Superficial Temporal Artery-Middle Cerebral Artery Bypass Trainer — captured revision 1296637; 2 rows.

View row-by-row proposals

9-0 and 10-0 polyamide (nylon) microsutures

Consumables, source row 1. Captured revision

Field	Captured value	Tentative value — held
Quantity	per anastomosis	—
Notes	9-0 used in 15 of 24 anastomoses, 10-0 in 9; 10-0 also ligates the vessel's accessory branches. Ethilon, with 5.0 mm (9-0) and 3.8 mm (10-0) round-bodied needles. The dominant cost across the 24-session series. The source's Methods section and the Ethilon brand both indicate polyamide (nylon); its Results and Discussion sections call the sutures "polyethylene". Polyamide is followed here.	9-0 used in 15 of 24 anastomoses, 10-0 in 9; 10-0 also ligates the vessel's accessory branches. Ethilon, with 5.0 mm (9-0) and 3.8 mm (10-0) round-bodied needles. The dominant cost across the 24-session series. The source's Methods section and the Ethilon brand both indicate polyamide (nylon); its Results and Discussion sections call the sutures "polyethylene". Polyamide is followed here. Used per anastomosis.

A per-use basis is present, but no count or amount is provided.

Methylene blue

Consumables, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	small quantity per session	small quantity per session
Notes	Applied to the vessel ends during the anastomosis to highlight the vessel wall under the microscope.	Applied to the vessel ends during the anastomosis to highlight the vessel wall under the microscope.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Synthetic Tourniquet Training Model (Souza Lima)

TissueDB/Simulators/Synthetic Tourniquet Training Model (Souza Lima) — captured revision 1296592; 3 rows.

View row-by-row proposals

Subcutaneous fat

Tissues, source row 3. Captured revision

Field	Captured value	Tentative value — held
Quantity	50 cm (shared)	50 cm
Notes	Part of the single upholstery-foam fill of the leg interior; the paper does not differentiate the subcutaneous-fat and muscle layers.	Part of the single upholstery-foam fill of the leg interior; the paper does not differentiate the subcutaneous-fat and muscle layers. Shared foam fill; not a separate allocation for each tissue row.

Confirm whether 50 cm is a linear stock amount or a dimension of the shared foam piece. Do not invent another count.

Muscle

Tissues, source row 4. Captured revision

Field	Captured value	Tentative value — held
Quantity	50 cm (shared)	50 cm
Notes	Same upholstery-foam fill as the subcutaneous-fat layer; simulates the musculature.	Same upholstery-foam fill as the subcutaneous-fat layer; simulates the musculature.

Confirm whether 50 cm is a linear stock amount or a dimension of the shared foam piece. Do not invent another count.

Blood

Tissues, source row 6. Captured revision

Field	Captured value	Tentative value — held
Quantity	250 mL red school paint and water	250 mL red school paint and water
Notes	Red school paint and water, mixed to a near-blood consistency; gushes at the simulated wound when the air pump is active.	Red school paint and water, mixed to a near-blood consistency; gushes at the simulated wound when the air pump is active.

The wording does not resolve whether 250 mL describes paint alone or the paint-and-water mixture. Keep the original amount and ingredients pending source review; do not silently assign a mixture volume.

Thermal Ablation Simulator

TissueDB/Simulators/Thermal Ablation Simulator — captured revision 1296521; 1 row.

View row-by-row proposals

Wire

Structural Parts, source row 13. Captured revision

Field	Captured value	Tentative value — held
Quantity	Small length	Small length
Notes	Loops around probe shaft foil for alligator clip attachment	Loops around probe shaft foil for alligator clip attachment

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness)

TissueDB/Simulators/Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness) — captured revision 1296638; 1 row.

View row-by-row proposals

Diaphragm anchor hardware

Structural Parts, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	Several	Several
Notes	Placed around the 11th rib to anchor the artificial diaphragm to the rib cage. The source does not provide a separate eyehook cost.	Placed around the 11th rib to anchor the artificial diaphragm to the rib cage. The source does not provide a separate eyehook cost.

The source cell gives only a qualitative or variable amount. Preserve the wording pending source review; do not convert it to an invented count.

Wound Packing Simulator

TissueDB/Simulators/Wound Packing Simulator — captured revision 1296015; 1 row.

View row-by-row proposals

Blood

Tissues, source row 2. Captured revision

Field	Captured value	Tentative value — held
Quantity	1	1
Notes	Pumped through the latex hose to simulate blood flow; flow stoppage indicates adequate pressure. Recirculated from the reservoir.	Pumped through the latex hose to simulate blood flow; flow stoppage indicates adequate pressure. Recirculated from the reservoir.

Independent source review reports no amount for the water/blood row. The existing 1 is not verified; keep it out of the five format-only relocations and investigate its basis. No replacement amount is inferred.

31 unknown quantities

These cells are blank or use an unknown marker. They are unknowns, not confirmed formatting defects. Retain the current marker until a source establishes the amount.

Monofilament

TissueDB/Materials/Monofilament — captured revision 1296527; 1 row.

View row-by-row proposals

Monofilament suture

Consumables, source row 1. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Closes the peritoneal flap, with intra-corporeal knotting, as the fifth and last step of the simulated repair. The source names the thread only as "a monofilament suture" — it states no gauge and no polymer.	Closes the peritoneal flap, with intra-corporeal knotting, as the fifth and last step of the simulated repair. The source names the thread only as "a monofilament suture" — it states no gauge and no polymer.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: Closes the peritoneal flap, with intra-corporeal knotting, as the fifth and last step of the simulated repair. The source names the thread only as "a monofilament suture" — it states no gauge and no polymer.<ref name="hanssen2022">Hanssen A, Hanssen DA, Hanssen RA, Plotnikov S, Haddad J, Daes JE. "Implementation and Validation of a Novel and Inexpensive Training Model for Laparoscopic Inguinal Hernia Repair." ''Journal of Abdominal Wall Surgery''. 2022;1:10305. DOI [https://doi.org/10.3389/jaws.2022.10305 10.3389/jaws.2022.10305].</ref>

PROPOSED
Quantity: 
Notes: Closes the peritoneal flap, with intra-corporeal knotting, as the fifth and last step of the simulated repair. The source names the thread only as "a monofilament suture" — it states no gauge and no polymer.<ref name="hanssen2022">Hanssen A, Hanssen DA, Hanssen RA, Plotnikov S, Haddad J, Daes JE. "Implementation and Validation of a Novel and Inexpensive Training Model for Laparoscopic Inguinal Hernia Repair." ''Journal of Abdominal Wall Surgery''. 2022;1:10305. DOI [https://doi.org/10.3389/jaws.2022.10305 10.3389/jaws.2022.10305].</ref>

Suture

TissueDB/Materials/Suture — captured revision 1296525; 13 rows.

View row-by-row proposals

9-0 and 10-0 polyamide (nylon) microsuture; 3-0 polyglactin

Consumables, source row 1. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	In the reported STA–MCA simulator, 9-0 and 10-0 polyamide (nylon) microsutures were used for anastomoses. The 10-0 suture also ligated accessory vessel branches. Round-bodied needles were 5.0 mm for 9-0 and 3.8 mm for 10-0. The 3-0 polyglactin-910 suture secured the IV cannulas to the vessel stumps.	In the reported STA–MCA simulator, 9-0 and 10-0 polyamide (nylon) microsutures were used for anastomoses. The 10-0 suture also ligated accessory vessel branches. Round-bodied needles were 5.0 mm for 9-0 and 3.8 mm for 10-0. The 3-0 polyglactin-910 suture secured the IV cannulas to the vessel stumps.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity:
Notes: In the reported STA–MCA simulator, 9-0 and 10-0 polyamide (nylon) microsutures were used for anastomoses. The 10-0 suture also ligated accessory vessel branches. Round-bodied needles were 5.0 mm for 9-0 and 3.8 mm for 10-0. The 3-0 polyglactin-910 suture secured the IV cannulas to the vessel stumps.<ref name="akdag2024">Akdag BA, Akdag B, Ikizoglu E, Husemoglu B, Kizmazoglu C, Aydin HE, Ozer E. "A Novel Training Model for Superficial Temporal Artery-Middle Cerebral Artery Anastomosis Using Microsurgical Techniques." ''World Neurosurgery''. 2024;190:e665–e674. DOI 10.1016/j.wneu.2024.07.200. PMID 39098505. The source's Methods section and the Ethilon brand both indicate polyamide (nylon); its Results and Discussion sections call the sutures "polyethylene" — polyamide is followed here.</ref>

PROPOSED
Quantity:
Notes: In the reported STA–MCA simulator, 9-0 and 10-0 polyamide (nylon) microsutures were used for anastomoses. The 10-0 suture also ligated accessory vessel branches. Round-bodied needles were 5.0 mm for 9-0 and 3.8 mm for 10-0. The 3-0 polyglactin-910 suture secured the IV cannulas to the vessel stumps.<ref name="akdag2024">Akdag BA, Akdag B, Ikizoglu E, Husemoglu B, Kizmazoglu C, Aydin HE, Ozer E. "A Novel Training Model for Superficial Temporal Artery-Middle Cerebral Artery Anastomosis Using Microsurgical Techniques." ''World Neurosurgery''. 2024;190:e665–e674. DOI 10.1016/j.wneu.2024.07.200. PMID 39098505. The source's Methods section and the Ethilon brand both indicate polyamide (nylon); its Results and Discussion sections call the sutures "polyethylene" — polyamide is followed here.</ref>

10-0 nylon microsuture; 3-0 nylon tie

Consumables, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Microsurgical side-to-side anastomosis. 10-0 nylon for the side-to-side anastomosis, consumed during practice. 3-0 nylon serves as the cannulation tie. Practised on chicken wing brachial artery segments. This build uses no 9-0.	Microsurgical side-to-side anastomosis. 10-0 nylon for the side-to-side anastomosis, consumed during practice. 3-0 nylon serves as the cannulation tie. Practised on chicken wing brachial artery segments. This build uses no 9-0.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Microsurgical side-to-side anastomosis.''' 10-0 nylon for the side-to-side anastomosis, consumed during practice. 3-0 nylon serves as the cannulation tie. Practised on chicken wing brachial artery segments. This build uses no 9-0.<ref name="cikla2020">Cikla U, Rowley P, Jennings Simoes EL, Ozaydin B, Goodman SL, Avci E, Baskaya MK, Patel NJ. "Grapefruit Training Model for Distal Anterior Cerebral Artery Side-to-Side Bypass." ''World Neurosurgery''. 2020;138:39–51. DOI 10.1016/j.wneu.2020.02.107. PMID 32109640.</ref>

PROPOSED
Quantity: 
Notes: '''Microsurgical side-to-side anastomosis.''' 10-0 nylon for the side-to-side anastomosis, consumed during practice. 3-0 nylon serves as the cannulation tie. Practised on chicken wing brachial artery segments. This build uses no 9-0.<ref name="cikla2020">Cikla U, Rowley P, Jennings Simoes EL, Ozaydin B, Goodman SL, Avci E, Baskaya MK, Patel NJ. "Grapefruit Training Model for Distal Anterior Cerebral Artery Side-to-Side Bypass." ''World Neurosurgery''. 2020;138:39–51. DOI 10.1016/j.wneu.2020.02.107. PMID 32109640.</ref>

6-0 and 7-0 polypropylene

Consumables, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Bench vascular anastomosis. 6-0 and 7-0 polypropylene on plastic-straw vessel surrogates.	Bench vascular anastomosis. 6-0 and 7-0 polypropylene on plastic-straw vessel surrogates.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Bench vascular anastomosis.''' 6-0 and 7-0 polypropylene on plastic-straw vessel surrogates.<ref name="cubas2022">Cubas WS. "Building and training a low-cost and portable vascular anastomosis simulator: initial experience of a surgical resident." ''Cirugía Cardiovascular''. 2022;29:82–88. DOI 10.1016/j.circv.2021.10.007. CC BY-NC-ND 4.0.</ref>

PROPOSED
Quantity: 
Notes: '''Bench vascular anastomosis.''' 6-0 and 7-0 polypropylene on plastic-straw vessel surrogates.<ref name="cubas2022">Cubas WS. "Building and training a low-cost and portable vascular anastomosis simulator: initial experience of a surgical resident." ''Cirugía Cardiovascular''. 2022;29:82–88. DOI 10.1016/j.circv.2021.10.007. CC BY-NC-ND 4.0.</ref>

4-0 or 5-0 silk, round-bodied (tapered) needle

Consumables, source row 4. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Bowel anastomosis. 4-0 or 5-0 silk on a round-bodied (tapered) needle. The source chooses inexpensive silk deliberately, to maximise affordability and accessibility for learners in low- and middle-income countries. For the actual procedure on patients, the source notes 4-0 or 5-0 Vicryl or PDS on a round-bodied needle.	Bowel anastomosis. 4-0 or 5-0 silk on a round-bodied (tapered) needle. The source chooses inexpensive silk deliberately, to maximise affordability and accessibility for learners in low- and middle-income countries. For the actual procedure on patients, the source notes 4-0 or 5-0 Vicryl or PDS on a round-bodied needle.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Bowel anastomosis.''' 4-0 or 5-0 silk on a round-bodied (tapered) needle. The source chooses inexpensive silk deliberately, to maximise affordability and accessibility for learners in low- and middle-income countries. For the actual procedure on patients, the source notes 4-0 or 5-0 Vicryl or PDS on a round-bodied needle.<ref name="wong2021">Wong J, Udeigwe-Okeke C, Ameh E. ''Colostomy in Newborns'' training module. Appropedia, 2021. Available at: https://www.appropedia.org/Colostomy_in_Newborns</ref>

PROPOSED
Quantity: 
Notes: '''Bowel anastomosis.''' 4-0 or 5-0 silk on a round-bodied (tapered) needle. The source chooses inexpensive silk deliberately, to maximise affordability and accessibility for learners in low- and middle-income countries. For the actual procedure on patients, the source notes 4-0 or 5-0 Vicryl or PDS on a round-bodied needle.<ref name="wong2021">Wong J, Udeigwe-Okeke C, Ameh E. ''Colostomy in Newborns'' training module. Appropedia, 2021. Available at: https://www.appropedia.org/Colostomy_in_Newborns</ref>

3-0 silk ties

Consumables, source row 5. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Vessel ligation. 3-0 silk ties.	Vessel ligation. 3-0 silk ties.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Vessel ligation.''' 3-0 silk ties.<ref name="hu2015">Hu Y, Le IA, Goodrich RN, Edwards BL, Gillen JR, Smith PW, Schroen AT, Rasmussen SK. "Construct validation of a cost-effective vessel ligation benchtop simulator." ''Journal of Surgical Education''. 2015;72(3):381–386. DOI 10.1016/j.jsurg.2014.11.003. PMID 25678049.</ref>

PROPOSED
Quantity: 
Notes: '''Vessel ligation.''' 3-0 silk ties.<ref name="hu2015">Hu Y, Le IA, Goodrich RN, Edwards BL, Gillen JR, Smith PW, Schroen AT, Rasmussen SK. "Construct validation of a cost-effective vessel ligation benchtop simulator." ''Journal of Surgical Education''. 2015;72(3):381–386. DOI 10.1016/j.jsurg.2014.11.003. PMID 25678049.</ref>

3-0 silk

Consumables, source row 6. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Knot-tying under force feedback. 3-0 silk, a use-time consumable. The source used Sofsilk 3-0 (Medtronic). Tied one-handed square-knot technique.	Knot-tying under force feedback. 3-0 silk, a use-time consumable. The source used Sofsilk 3-0 (Medtronic). Tied one-handed square-knot technique.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Knot-tying under force feedback.''' 3-0 silk, a use-time consumable. The source used Sofsilk 3-0 (Medtronic). Tied one-handed square-knot technique.<ref name="amiel2020">Amiel I, Anteby R, Cordoba M, Laufer S, Shwaartz C, Rosin D, Gutman M, Ziv A, Mashiach R. "Feedback based simulator training reduces superfluous forces exerted by novice residents practicing knot tying for vessel ligation." ''American Journal of Surgery''. 2020;220(1):100–104. DOI 10.1016/j.amjsurg.2019.11.027. PMID 31806168.</ref>

PROPOSED
Quantity: 
Notes: '''Knot-tying under force feedback.''' 3-0 silk, a use-time consumable. The source used Sofsilk 3-0 (Medtronic). Tied one-handed square-knot technique.<ref name="amiel2020">Amiel I, Anteby R, Cordoba M, Laufer S, Shwaartz C, Rosin D, Gutman M, Ziv A, Mashiach R. "Feedback based simulator training reduces superfluous forces exerted by novice residents practicing knot tying for vessel ligation." ''American Journal of Surgery''. 2020;220(1):100–104. DOI 10.1016/j.amjsurg.2019.11.027. PMID 31806168.</ref>

Mononylon 4-0 (5-0 and 6-0 named but not preferred)

Consumables, source row 7. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Skin and general suturing practice. Mononylon 4-0 gives the firmest edge apposition and resists tearing. Finer 5-0 and 6-0 threads can tear the pad edges under higher-intensity manual traction.	Skin and general suturing practice. Mononylon 4-0 gives the firmest edge apposition and resists tearing. Finer 5-0 and 6-0 threads can tear the pad edges under higher-intensity manual traction.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Skin and general suturing practice.''' Mononylon 4-0 gives the firmest edge apposition and resists tearing. Finer 5-0 and 6-0 threads can tear the pad edges under higher-intensity manual traction.<ref name="almeida2023">Almeida NRC, Braga JP, Bentes LGB, Lemos RS, Fernandes MRN, Andrade GL, Araújo VMM, Santos DRD, Yasojima EY. "Low-cost suture simulator to gain basic surgical skills." ''Acta Cirúrgica Brasileira''. 2023;38:e384223. DOI 10.1590/acb384223. PMID 37851786.</ref>

PROPOSED
Quantity: 
Notes: '''Skin and general suturing practice.''' Mononylon 4-0 gives the firmest edge apposition and resists tearing. Finer 5-0 and 6-0 threads can tear the pad edges under higher-intensity manual traction.<ref name="almeida2023">Almeida NRC, Braga JP, Bentes LGB, Lemos RS, Fernandes MRN, Andrade GL, Araújo VMM, Santos DRD, Yasojima EY. "Low-cost suture simulator to gain basic surgical skills." ''Acta Cirúrgica Brasileira''. 2023;38:e384223. DOI 10.1590/acb384223. PMID 37851786.</ref>

6-0 Prolene (polypropylene)

Consumables, source row 8. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Dural closure under the microscope. 6-0 Prolene (polypropylene) closes the latex-glove dura. A use-time consumable, not a build material: the vendors in the source bootcamp supplied it free of charge.	Dural closure under the microscope. 6-0 Prolene (polypropylene) closes the latex-glove dura. A use-time consumable, not a build material: the vendors in the source bootcamp supplied it free of charge.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Dural closure under the microscope.''' 6-0 Prolene (polypropylene) closes the latex-glove dura. A use-time consumable, not a build material: the vendors in the source bootcamp supplied it free of charge.<ref name="bakhshi2022">Bakhshi SK, Ahmad R, Merchant AAH, Noorali AA, Abdul Rahim K, Shaikh NQ, Afzal N, Lakhdir MPA, Shamim MS, Haider AH. "Development, outcome and costs of a simulation-based neurosurgery bootcamp at the national level." ''BMC Medical Education''. 2022;22:896. DOI 10.1186/s12909-022-03965-9. PMID 36578075. Licensed CC BY 4.0.</ref>

PROPOSED
Quantity: 
Notes: '''Dural closure under the microscope.''' 6-0 Prolene (polypropylene) closes the latex-glove dura. A use-time consumable, not a build material: the vendors in the source bootcamp supplied it free of charge.<ref name="bakhshi2022">Bakhshi SK, Ahmad R, Merchant AAH, Noorali AA, Abdul Rahim K, Shaikh NQ, Afzal N, Lakhdir MPA, Shamim MS, Haider AH. "Development, outcome and costs of a simulation-based neurosurgery bootcamp at the national level." ''BMC Medical Education''. 2022;22:896. DOI 10.1186/s12909-022-03965-9. PMID 36578075. Licensed CC BY 4.0.</ref>

Silk ties

Consumables, source row 9. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	Appendix stump ligation. Silk ties close the cut, inverted glove. The closed glove retains the sand and cotton fill. The build instructions state no gauge.	Appendix stump ligation. Silk ties close the cut, inverted glove. The closed glove retains the sand and cotton fill. The build instructions state no gauge.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: 
Notes: '''Appendix stump ligation.''' Silk ties close the cut, inverted glove. The closed glove retains the sand and cotton fill. The build instructions state no gauge.<ref name="allsafe_appendicitis">ALL-SAFE Consortium. ''ALL-SAFE Acute Appendicitis Simulation Build Instructions.'' Global Surgical Training Challenge, 2022. Build-instruction document not indexed in PubMed; primary source linked directly.</ref>

PROPOSED
Quantity: 
Notes: '''Appendix stump ligation.''' Silk ties close the cut, inverted glove. The closed glove retains the sand and cotton fill. The build instructions state no gauge.<ref name="allsafe_appendicitis">ALL-SAFE Consortium. ''ALL-SAFE Acute Appendicitis Simulation Build Instructions.'' Global Surgical Training Challenge, 2022. Build-instruction document not indexed in PubMed; primary source linked directly.</ref>

Suture material

Consumables, source row 10. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	— (empty cell)	— (empty cell)

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Suture thread

Consumables, source row 11. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	— (empty cell)	— (empty cell)

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Suture tie

Consumables, source row 12. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	— (empty cell)	— (empty cell)

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Chest tube and suture

Consumables, source row 13. Captured revision

Field	Captured value	Recorded / optional value
Quantity	— (empty cell)	— (empty cell)
Notes	— (empty cell)	— (empty cell)

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Cerebrovascular Bypass Simulator (Iatrotek)

TissueDB/Simulators/Cerebrovascular Bypass Simulator (Iatrotek) — captured revision 1281786; 5 rows.

View row-by-row proposals

Kezlex PVA-hydrogel vessels

Consumables, source row 1. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Kezlex brand. Purchased synthetic vessels. The study describes 1, 2 and 3 mm diameters and 70 mm lengths. Its validation used 2 mm vessels. Keep moist. The source gives no replacement interval.	Kezlex brand. Purchased synthetic vessels. The study describes 1, 2 and 3 mm diameters and 70 mm lengths. Its validation used 2 mm vessels. Keep moist. The source gives no replacement interval.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: -
Notes: Kezlex brand. Purchased synthetic vessels. The study describes 1, 2 and 3&nbsp;mm diameters and 70&nbsp;mm lengths. Its validation used 2&nbsp;mm vessels. Keep moist. The source gives no replacement interval.<ref name="dandrea2023" />

PROPOSED
Quantity: -
Notes: Kezlex brand. Purchased synthetic vessels. The study describes 1, 2 and 3&nbsp;mm diameters and 70&nbsp;mm lengths. Its validation used 2&nbsp;mm vessels. Keep moist. The source gives no replacement interval.<ref name="dandrea2023" />

Monosof sutures

Consumables, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	The validation study used 9-0 Monosof for interrupted suturing.	The validation study used 9-0 Monosof for interrupted suturing.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: -
Notes: The validation study used 9-0 Monosof for interrupted suturing.<ref name="dandrea2023" />

PROPOSED
Quantity: -
Notes: The validation study used 9-0 Monosof for interrupted suturing.<ref name="dandrea2023" />

Indocyanine green

Consumables, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Optional reagent for checking the completed anastomosis for leaks.	Optional reagent for checking the completed anastomosis for leaks.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: -
Notes: Optional reagent for checking the completed anastomosis for leaks.<ref name="dandrea2023" />

PROPOSED
Quantity: -
Notes: Optional reagent for checking the completed anastomosis for leaks.<ref name="dandrea2023" />

Fluoresceine

Consumables, source row 4. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	The validation study used indocyanine green and/or fluoresceine for leak detection.	The validation study used indocyanine green and/or fluoresceine for leak detection.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: -
Notes: The validation study used indocyanine green and/or fluoresceine for leak detection.<ref name="dandrea2023" />

PROPOSED
Quantity: -
Notes: The validation study used indocyanine green and/or fluoresceine for leak detection.<ref name="dandrea2023" />

Water

Consumables, source row 5. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	The source lists water and/or indocyanine green for continuous vessel injection and leak detection.	The source lists water and/or indocyanine green for continuous vessel injection and leak detection.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Exact source and preserved reference markers

CAPTURED
Quantity: -
Notes: The source lists water and/or indocyanine green for continuous vessel injection and leak detection.<ref name="dandrea2023" />

PROPOSED
Quantity: -
Notes: The source lists water and/or indocyanine green for continuous vessel injection and leak detection.<ref name="dandrea2023" />

Chest Tube Insertion Simulator (Man-O-War)

TissueDB/Simulators/Chest Tube Insertion Simulator (Man-O-War) — captured revision 1296502; 1 row.

View row-by-row proposals

Fasteners

Structural Parts, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Secure the foam chest wall to the bucket frame, so it can be unscrewed and replaced. Priced with the basin line.	Secure the foam chest wall to the bucket frame, so it can be unscrewed and replaced. Priced with the basin line.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Cranial Burr Hole and Craniotomy Simulator (Bakhshi)

TissueDB/Simulators/Cranial Burr Hole and Craniotomy Simulator (Bakhshi) — captured revision 1296629; 1 row.

View row-by-row proposals

Cranial-access instruments (training equipment)

Structural Parts, source row 1. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Used for the burr-hole and craniotomy exercises. Perforators and cutters were reused from the operating room after sterilisation; the electronic craniotome was provided free of charge by vendors during the bootcamp. These are training instruments, not anatomical simulants or skull-fabrication components.	Used for the burr-hole and craniotomy exercises. Perforators and cutters were reused from the operating room after sterilisation; the electronic craniotome was provided free of charge by vendors during the bootcamp. These are training instruments, not anatomical simulants or skull-fabrication components.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Cricothyrotomy Simulator (Aho)

TissueDB/Simulators/Cricothyrotomy Simulator (Aho) — captured revision 1285637; 1 row.

View row-by-row proposals

Thyroid-cartilage fastener

Structural Parts, source row 1. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	Fixes the cardboard thyroid cartilage to the Styrofoam.	Fixes the cardboard thyroid cartilage to the Styrofoam.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Cricothyrotomy Simulator (D'Auria)

TissueDB/Simulators/Cricothyrotomy Simulator (D'Auria) — captured revision 1296631; 1 row.

View row-by-row proposals

Cartilage — tracheal rings

Tissues, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Soft tracheal-cartilage rings belonging to the White/UW physical build.	Soft tracheal-cartilage rings belonging to the White/UW physical build.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Cricothyrotomy Simulator (White UW)

TissueDB/Simulators/Cricothyrotomy Simulator (White UW) — captured revision 1296568; 1 row.

View row-by-row proposals

Cartilage (tracheal rings)

Tissues, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	Soft rings simulating the tracheal cartilage, covered with conductive foil.	Soft rings simulating the tracheal cartilage, covered with conductive foil.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Laparoscopic Inguinal Hernia Repair Simulator (Hanssen)

TissueDB/Simulators/Laparoscopic Inguinal Hernia Repair Simulator (Hanssen) — captured revision 1296611; 1 row.

View row-by-row proposals

Assembly adhesive

Structural Parts, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	Attaches the condom that represents the indirect hernia sac to the pork chop, and fixes the spermatic-cord cables and the vas-deferens catheter to it the same way. Hanssen et al. (2022) name no brand, quantity or price.	Attaches the condom that represents the indirect hernia sac to the pork chop, and fixes the spermatic-cord cables and the vas-deferens catheter to it the same way. Hanssen et al. (2022) name no brand, quantity or price.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Pediatric Mid-Forearm Closed Reduction Simulator

TissueDB/Simulators/Pediatric Mid-Forearm Closed Reduction Simulator — captured revision 1292841; 1 row.

View row-by-row proposals

Bone attachment wire

Structural Parts, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	Attaches the fixation materials to the bones. Used instead of screws because the synthetic bone material is friable.	Attaches the fixation materials to the bones. Used instead of screws because the synthetic bone material is friable.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Percutaneous Renal Access Simulator (Ewald)

TissueDB/Simulators/Percutaneous Renal Access Simulator (Ewald) — captured revision 1296091; 1 row.

View row-by-row proposals

Bone

Tissues, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	Chalk sticks embedded between foam layers to simulate ribs 10–12; create fluoroscopic needle interference.	Chalk sticks embedded between foam layers to simulate ribs 10–12; create fluoroscopic needle interference.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller)

TissueDB/Simulators/Resuscitative Endovascular Balloon Occlusion of the Aorta Simulator (Keller) — captured revision 1296628; 1 row.

View row-by-row proposals

PVC pump inflow/outflow tubing

Structural Parts, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	—	—
Notes	The pump inflow and outflow are made of 1.3-cm ID polyvinyl chloride tubing.	The pump inflow and outflow are made of 1.3-cm ID polyvinyl chloride tubing.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness)

TissueDB/Simulators/Thoracoscopic Diaphragmatic Hernia Repair Simulator (Barsness) — captured revision 1296638; 1 row.

View row-by-row proposals

Small Intestine

Tissues, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Synthetic intestine is herniated through the diaphragmatic defect and reduced during the simulated repair. The source does not specify the material or quantity. The evaluation identified the synthetic intestines as the least realistic tissue component and noted poor haptic fidelity.	Synthetic intestine is herniated through the diaphragmatic defect and reduced during the simulated repair. The source does not specify the material or quantity. The evaluation identified the synthetic intestines as the least realistic tissue component and noted poor haptic fidelity.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Urinary Catheterization Simulator (Gillis)

TissueDB/Simulators/Urinary Catheterization Simulator (Gillis) — captured revision 1296641; 2 rows.

View row-by-row proposals

Front-window sealant

Structural Parts, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Provides the watertight seal between the acrylic front window and the PLA bladder body.	Provides the watertight seal between the acrylic front window and the PLA bladder body.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

Assembly adhesive

Structural Parts, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	-	-
Notes	Holds the SLA threaded fitting in the PLA bladder base and the FDM curved barbed connector in the Grey Pro valve body.	Holds the SLA threaded fitting in the PLA bladder base and the FDM curved barbed connector in the Grey Pro valve body.

No quantity is stated in the current cell. This is an unknown, not a confirmed formatting defect. Retain the existing blank/unknown marker until a source establishes the amount; do not infer a count.

3 optional wording suggestions

These quantities are already acceptable. The suggestions preserve the single-length or variable-layer basis and are excluded from the page patches.

Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar)

TissueDB/Simulators/Suction-Assisted Laryngoscopy and Airway Decontamination Simulator (Kumar) — captured revision 1285559; 2 rows.

View row-by-row proposals

Delivery tube (Tube-A)

Structural Parts, source row 2. Captured revision

Field	Captured value	Recorded / optional value
Quantity	1 length of 2 metres	2 m
Notes	6.0 mm inner / 8.5 mm outer diameter; supplied with Yankauer suction catheter packs. Carries pressurised contaminant from the spray pump up through the stomach and esophagus to the upper esophagus; its outer end joins the pump nozzle.	6.0 mm inner / 8.5 mm outer diameter; supplied with Yankauer suction catheter packs. Carries pressurised contaminant from the spray pump up through the stomach and esophagus to the upper esophagus; its outer end joins the pump nozzle. One continuous length.

A linear material amount is an allowed Quantity. Preserve the one-length count in Notes; do not impose a digits-only rule.

Drainage tube (Tube-B)

Structural Parts, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	1 length of 2 metres	2 m
Notes	6.0 mm inner / 8.5 mm outer diameter. Drains contaminant out of the stomach to the container; the holed end sits inside the stomach.	6.0 mm inner / 8.5 mm outer diameter. Drains contaminant out of the stomach to the container; the holed end sits inside the stomach. One continuous length.

A linear material amount is an allowed Quantity. Preserve the one-length count in Notes; do not impose a digits-only rule.

Z-Plasty Simulator

TissueDB/Simulators/Z-Plasty Simulator — captured revision 1285566; 1 row.

View row-by-row proposals

Subcutaneous fat

Tissues, source row 3. Captured revision

Field	Captured value	Recorded / optional value
Quantity	1–multiple layers	1 or more layers
Notes	Yellow food colouring. Can be built up from several layers where a thicker fat layer is needed.	Yellow food colouring. Can be built up from several layers where a thicker fat layer is needed.

A minimum of one layer is stated; the upper count is intentionally variable.

Translation, historical and documentation dispositions

Translations: 20 item rows on three pages. Seventeen Quantity cells retain their formatting; three Turkish integrated-landmark cells are held for synchronization and language review. No translation is included in the canonical page patches. Sources: Infant Intraosseous Infusion /zh, Injection Laryngoplasty /tr, and Trocar Placement /es.
Historical sandbox: 13 rows in TissueDB/Simulators Sandbox/Caboodle Noodle, explicitly retained as historical. Ten have editorial or source-review suggestions, and three retain their formatting. Historical changes are held and excluded from production patches.
Documentation: two example rows in Template:TissueDB Simulator Layout/doc. The skin-sheet example is updated by the separate documentation proposal; the base-platform example remains unchanged.

Validation and limits

The audit checked all 849 source hashes, 766 exact row positions, unique row and table IDs, and all 33 original reference occurrences in Quantity and Notes. Numerical tokens were preserved, including equivalent spelled-out numbers. The 99 proposed rows preserve per-model, per-session, stock, sharing and per-use bases. Proposed page patches preserve table shape and change only Quantity and the corresponding existing Notes field.

The Gillis urethra proposal retains the complete gillis_fig1 reference definition with the 178 mm length and preserves its existing reference reuse. The five Wound Packing proposals retain the separately reviewed source details and caveats.

This review addresses captured formatting and placement of evidence. Except for the specifically recorded source checks, it does not independently verify every underlying study or numerical amount. Compliant means that the Quantity cell needs no formatting change; it does not mean that every source value has been revalidated. All changes on this review page remain unapplied proposals.