The following pages link to Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions:
Displayed 35 items.
- Open source 3-D printing of OSAT (← links | edit)
- Mechanical testing of polymer components made with the RepRap 3-D printer (← links | edit)
- MOST RepRap Build (← links | edit)
- Development and feasibility of applications for the RepRap 3-D printer (← links | edit)
- Solar powered distributed customized manufacturing (← links | edit)
- Tensile test protocol: MOST (← links | edit)
- Recyclebot (← links | edit)
- MSE4777 (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (transclusion) (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental (redirect page) (← links | edit)
- Plastic bank (← links | edit)
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament (← links | edit)
- Plastic Bank Extruder v1.0 (← links | edit)
- Methodology for 3D-Printed Part Design (← links | edit)
- ENGR242 (← links | edit)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (← links | edit)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (← links | edit)
- Thermal properties of 3-D printed polylactic acid-metal composites (← links | edit)
- Factors effecting real-time optical monitoring of fused filament 3D printing (← links | edit)
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (← links | edit)
- L3999-Fall2018 (← links | edit)
- L3999 (← links | edit)
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens (← links | edit)
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid (← links | edit)
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing (← links | edit)
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing (← links | edit)
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins (← links | edit)
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites (← links | edit)
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components (← links | edit)
- MSE 5621 (← links | edit)
- Vacuum Outgassing Characteristics of Unpigmented 3-D Printed Polymers Coated with ALD Alumina (← links | edit)
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane (← links | edit)
- Thermal Post-Processing of 3-D Printed Polypropylene Parts for Vacuum Systems (← links | edit)
- Understanding the multilevel phenomena that enables inorganic atomic layer deposition to provide barrier coatings for highly-porous 3-D printed plastic in vacuums (← links | edit)
- User:Bmtymrak (← links | edit)