(→2016) |
|||
Line 29: | Line 29: | ||
|Image:Delta_Dampener1.jpg | [http://www.appropedia.org/Vibration_Dampener_(MOST_Delta:_Athena) Vibration Dampener] | |Image:Delta_Dampener1.jpg | [http://www.appropedia.org/Vibration_Dampener_(MOST_Delta:_Athena) Vibration Dampener] | ||
|[http://www.appropedia.org/Two-part-end-effector Two Part End Effector] | |[http://www.appropedia.org/Two-part-end-effector Two Part End Effector] | ||
|Image:Hook.jpg | [http://www.appropedia.org/Rod_alarm] | |||
}} | }} | ||
Revision as of 05:41, 25 November 2016
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.
For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer
Instructions
- Add an image and hyperlink using double square brackets to the appropriate gallery below
- By clicking on the resultant red link create a page for your design
- Include the template {{777}} at the top of the page
- Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
- Include at least one photo
- If relevant include a Youtube video of operation/assembly or both
- Include tools needed
- Include a BOM
- Include clear instructions
- Include all SCAD and STL files for design improvement
- Link to any additional information (e.g. new software/firmware or slicing code at Github)
I am working on
- short description and signature in bullet list