J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
| Line 1: | Line 1: | ||
{{MOST}} {{MOST-RepRap}} | {{MOST}} | ||
{{MOST-RepRap}} | |||
= Overview = | = Overview = | ||
The purpose of this project is to determine mechanical properties of polymer components printed with the open source [http://reprap.org/wiki/Main_Page RepRap Mendel 3-D printer]. Standard test methods are to be used to gather accurate and acceptable test data. The results of the mechanical testing will be used for engineering analysis of parts designed to be created with the RepRap. | The purpose of this project is to determine mechanical properties of polymer components printed with the open source [http://reprap.org/wiki/Main_Page RepRap Mendel 3-D printer]. Standard test methods are to be used to gather accurate and acceptable test data. The results of the mechanical testing will be used for engineering analysis of parts designed to be created with the RepRap. | ||
| Line 27: | Line 27: | ||
* [[Applications of RepRap distributed production - literature review]] | * [[Applications of RepRap distributed production - literature review]] | ||
* [[Recyclebot]] | * [[Recyclebot]] | ||
[[category:MOST]] | [[category:MOST]] | ||
Revision as of 13:13, 22 March 2012
Overview
The purpose of this project is to determine mechanical properties of polymer components printed with the open source RepRap Mendel 3-D printer. Standard test methods are to be used to gather accurate and acceptable test data. The results of the mechanical testing will be used for engineering analysis of parts designed to be created with the RepRap.
To Do
- Identify test standards
- Find available test facilities and equipment
- Literature review
Testing Standards
ASTM D638-10 Standard Test Method for Tensile Properties of Plastics
Test Specimen
ASTM Type I specimen - STL file
Test Equipment
See Also
- For electrical testing and for thermal conductivity :disc 2.5 inches in diameter that is 3.2 mm thick. 5X