Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
Mechanical testing of 3D printed metal parts
| By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
|This page is part of an international project to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.
Research: Open source 3-D printing of OSAT • RecycleBot • LCA of home recycling • Green Distributed Recycling • Ethical Filament • LCA of distributed manufacturing • RepRap LCA Energy and CO2 • Solar-powered RepRaps • solar powered recyclebot • Feasibility hub • Mechanical testing • RepRap printing protocol: MOST• Lessons learned • MOST RepRap Build • MOST Prusa Build • MOST HS RepRap build • RepRap Print Server
The mechanical properties of 3D printed metal parts are evaluated using a variety of methods: tensile testing, hardness measurement, bend testing, and shear testing.
Standard test methods for tension testing of 3d printed metallic materials
Tensile testing is performed according to ASTM E8/E8M using the prescribed subsize specimen dimensions.
Standard test methods for Rockwell hardness of 3D printed metallic materials
Material hardness is measured according to ASTM E18.
Flexural modulus of 3D printed metallic materials
There is no single standard that appropriately describes these samples and their given application. To evaluate the flexural modulus of 3D printed metallic materials ASTM E190, ASTM E290, ASTM E855, ASTM D5528, and ASTM D7264/7264M should be referenced and best practices should be maintained.
Apparent shear strength between specimen and substrate
ASTM E8 should be referred to for the measurement of shear strength between specimen and substrate.