This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Description" with value "Primer canvas de actividad de clase en 2021". Since there have been only a few results, also nearby values are displayed.

Showing below up to 25 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


    

List of results

  • Jellybox improvement based on 18. Mechanical vibration  + (Potential Solutions:)
  • Potential difference  + (Potential difference is defined as the worPotential difference is defined as the work that must be performed to move a charge from one point to another. For example there must be a potential difference in a current for a charge to move between two points. It is also described as the potential energy difference per unit charge or voltage. The unit of potential difference is the Volt (V).t of potential difference is the Volt (V).)
  • Potential energy  + (Potential energy is in a sense, the storagPotential energy is in a sense, the storage system for energy. For example when a ball is lifted above the ground, the potential energy of the ball will increase when the ball is lifted higher. If the ball is released the potential energy changes to kinetic energy. So work done to the ball will increase the ball's potential energy and when that ball is released it transfers that work to kinetic energy and work is done on the ground by the ball when it falls and hits the ground.he ball when it falls and hits the ground.)
  • Voluntourism  + (Potential problems with volunteering-as-tourism programs include:)
  • Potpourri  + (Potpourri is a mixture of scented dried plant materials made to perfume a space in the human home. It's a lovely way to bring nature into the home environment, to use natural materials to add both scent and colour to your living space.)
  • Bouteilles plastiques  + (Pour faire germer les graines, noyaux et cPour faire germer les graines, noyaux et compagnie, les faire tremper prealablement l'équivalent d'une journée dans de l'eau. Puis les disposer dans la bouteille. Rincer les graines par le dessus et vider l'eau par le goulot, en s'aidant d'une passeoire pour récupérer les graines qui s'échapent. (Elle sont vivantes hein..). Opération à renouveller au moins 2 fois sur 24h.ion à renouveller au moins 2 fois sur 24h.)
  • Poverty alleviation  + (Poverty is about not having enough money to meet basic needs including food, clothing and shelter. However, poverty is more, much more than just not having enough money.)
  • Poverty  + (Poverty is the state of being without adequate life support services. Most often, poverty is a result of being unemployed, or without unemployment benefits.)
  • Precious Plastic  + (Precious Plastic is a project started by Dave Hakkens (also the creator of Phonebloks) is a collection of Open-Source machines designed for recylcing and reusing thermoplastics.)
  • Prefabricated buildings  + (Prefabricated buildings, especially houses, potentially have a big advantage in housing affordability. In recent times, attempts have been made to make high quality, environmentally friendly prefabricated buildings.)
  • Pregnancy Test  + (Pregnancy Test)
  • Prehospital Childbirth  + (Prehospital Childbirth is included in this California-based EMT program as it is required for skills verification for California Registration.)
  • Rapid Prototype Hearing Aid  + (Premise: 3D print hearing aids, or molds for hearing aids that allow a custom fit to users ear. Provide an alternative to battery power.)
  • Obvious 3D printer technology based on 11. Cushion in Advance  + (Prepare emergency means beforehand to compPrepare emergency means beforehand to compensate for the relatively low reliability of an object.</br>• Magnetic strip on photographic film that directs the developer to compensate for poor exposure</br>• Back-up parachute</br>• Alternate air system for aircraft instrumentsernate air system for aircraft instruments)
  • Small-scale oil extraction from groundnuts and copra/Introduction  + (Prepared under the joint auspices of the International Labour Office and the United National Industrial Development Organisation)
  • Small Scale Maize Milling/1  + (Prepared under the joint auspices of the International Labour Office and the United Nations Industrial Development Organisation)
  • Branch Magazine  + (Presenting the ‘Branch Magazine Special IsPresenting the ‘Branch Magazine Special Issue 6: Green Screen Edition’ that aims to amplify voices from feminist, decolonial and indigenous perspectives that approach the climate and environmental impact of internet infrastructures and new technologies. In this multilingual edition, you will find different perspectives that critique technocapitalism and envision pathways for just transition to sustainable and equitable infrastructures. It consists of four sections:astructures. It consists of four sections:)
  • Food preservation and storage  + (Preserving and storing foods reduces reliaPreserving and storing foods reduces reliance on long-distance transported food and the market industry. Home-grown foods can be preserved and stored outside of their growing season and continually consumed throughout the year, enhancing self-sufficiency and independence from the supermarket. Food can be preserved and saved by dehydration (e.g. solar food drying, freezing, vacuum packing, canning, bottling, pickling and jellying. canning, bottling, pickling and jellying.)
  • Water purification by the ecosystem  + (Preserving forests can be "a cost-effective way to provide clean drinking water because forests reduce landslides, erosion and sediment, improve water purity by filtering pollutants, and in some cases capture and store water.")
  • Pressure  + (Pressure (symbolized by P) is the effect oPressure (symbolized by P) is the effect of a normal force acting on an area<sup>1</sup>. Mathematically pressure is force/area. For an ideal gas pressure can be estimated by (density*R*T), where R is the universal gas constant and T is the temperature in Kelvin. Atmospheric pressure (1 atm) is the pressure which is exerted by the weight of the atmosphere at sea level, and is equivalent to 101.325 kPa (or 2.28 lbf in English units). Atmospheric pressure changes in relation to vertical distance from the ocean. For instance, in Denver, the "mile high city", atmospheric pressure is only 84 kPa."mile high city", atmospheric pressure is only 84 kPa.)
  • Solar Medical Waste Incinerator  + (Prevent cross-contamination from waste andPrevent cross-contamination from waste and generate energy using heat exchanger. Our medical waste incinerators are designed to provide efficient waste destruction, utilizing the best available technologies and environmentally friendly processes. Our expertise is second to none in this sector.xpertise is second to none in this sector.)
  • Prevention International: No Cervical Cancer  + (Prevention International: No Cervical CancPrevention International: No Cervical Cancer or P.I.N.C.C. is nonprofit, volunteer medical service organization whose mission is to create sustainable programs that prevent cervical cancer by educating and treating women, training medical personnel, and equipping facilities in developing countries.ipping facilities in developing countries.)
  • Open Source Software Toolchain for Automated Non-Targeted Screening for Toxins in Alternative Foods  + (Previous published methods for non-targetePrevious published methods for non-targeted screening of toxins in alternative foods such as leaf concentrate, agricultural residues or plastic fed to biological consortia are time consuming and expensive and thus present accessibility, as well as, time-constraint issues for scientists from under resourced settings to identify safe alternative foods. The novel methodology presented here, utilizes a completely free and open source software toolchain for automatically screening unknown alternative foods for toxicity using experimental data from high-pressure liquid chromatography and mass spectrometry. The process uses three distinct tools (mass spectrometry analysis with MZmine 2, formula assignment with MFAssignR, and data filtering with ToxAssign) enabling it to be modular and easily upgradable in the future. MZmine 2 and MFAssignR have been previously described, while ToxAssign was developed here to match the formulas output by formula assignment to potentially toxic compounds in a local table, then look up toxic data on the Open Food Tox Database for the matched compounds. This process is designed to fill the gap between food safety analysis techniques and developing alternative food production techniques to allow for new methods of food production to be preliminarily tested before animal testing. The methodology was validated against a previous method using proprietary commercial software. The new process identifies all of the toxic elements the previous process identified with more detailed information than the previous process was able to provide automatically.process was able to provide automatically.)
  • Optimization of annealing cycles for electric output in outdoor conditions for amorphous silicon photovoltaic–thermal systems  + (Previous studies with fixed operating tempPrevious studies with fixed operating temperatures have shown that hydrogenated amorphous silicon (a-Si:H) was a promising absorber layer for solar photovoltaic–thermal (PVT) systems because of (a) a low temperature coefficient and (b) the opportunity to reverse light induced degradation with thermal annealing. This study further refined the simulation of the optimal dispatch strategy for a-Si:H based PVT by studying annealing cycles and analysis of the degradation at other operating temperatures controlled by the varying ambient temperatures. Four representative case studies were evaluated for the combinations of high and low solar flux and high and low average ambient temperature. Electrically-optimized dispatch strategies are found for a range of PVT thermal insulating effectivenesses. The results showed significantly more electricity generation in all the case study representative regions except for areas dominated by low temperatures and low solar fluxes. These results indicate that a-Si:H PV performance can be improved in most populated regions in the world by integrating it into a PVT device and using spike annealing to reverse light-induced degradation effects. The model presented in this paper uses publicly-available data to implement suitable dispatch strategies and execute virtual performance analysis of PVT for any geographic location in the world. for any geographic location in the world.)
  • The effects of dispatch strategy on electrical performance of amorphous silicon-based solar photovoltaic-thermal systems  + (Previous work has shown that high-temperatPrevious work has shown that high-temperature short-term spike thermal annealing of hydrogenated amorphous silicon (a-Si:H) photovoltaic thermal (PVT) systems results in higher electrical energy output. The relationship between temperature and performance of a-Si:H PVT is not simple as high temperatures during thermal annealing improves the immediate electrical performance following an anneal, but during the anneal it creates a marked drop in electrical performance. In addition, the power generation of a-Si:H PVT depends on both the environmental conditions and the Staebler–Wronski Effect kinetics. In order to improve the performance of a-Si:H PVT systems further, this paper reports on the effect of various dispatch strategies on system electrical performance. Utilizing experimental results from thermal annealing, an annealing model simulation for a-Si:H-based PVT was developed and applied to different cities in the U.S. to investigate potential geographic effects on the dispatch optimization of the overall electrical PVT systems performance and annual electrical yield. The results showed that spike thermal annealing once per day maximized the improved electrical energy generation.the improved electrical energy generation.)
 (Primer canvas de actividad de clase en 2021)
  • Oil Extraction (Practical Action Brief)  + (Principles of oil extraction. Oil is extraPrinciples of oil extraction. Oil is extracted from a number of fruits, nuts and seeds (Table 1) for use in cooking and soapmaking1 or as an ingredient in other foods such as baked or fried goods. Oil is a valuable product with universal demand, and the possible income from oil extraction is therefore often enough to justify the relatively high cost of setting up and running a small-scale oil milling business.unning a small-scale oil milling business.)
  • 3D printed custom T-shirt  + (Print Out Custom T-Shirts at your Home right from your Desk with an Amazing 3D Printer!)
  • Printed circuit boards  + (Printed circuit boards can be produced by a laser printer, and can even be made with carbon-based compounds.)
  • Small-scale oil extraction from groundnuts and copra/Chapter 2: Pre-processing of coconuts and groundnuts  + (Prior to describing the various oil-extracPrior to describing the various oil-extraction techniques, it is necessary to consider the raw materials involved (i.e. copra and groundnuts) and the pre-processing operations. However, as this memorandum is mostly concerned with oil extraction, information on these operations will be limited. The reader is therefore advised to obtain additional information from available publications, some of which are indicated in the chapter and in the bibliography.ed in the chapter and in the bibliography.)
  • Spring-based energy storage radio  + (Problem)
  • Wheelchair seating  + (Problem "In developing countries spinal coProblem</br>"In developing countries spinal cord injuries are normally (80%) followed by death within 2 years as a result of pressure sore related problems."</br> </br>Summary</br>"Pressure relieving cushions have been used in the management of spinal cord injury for many years and are provided as part of the rehabilitation process routinely. They fall into broad catagories: contoured (standard shape or customized) which can be made of many different materials ranging from foam to cardboard; flat (normally foam or gel); air flotation; liquid flotation; gel; and combinations of the above. This group's paper describes "a prototype low cost cushion design, using commonly available materials, which may have some relevance for individuals with spinal cord injury in developing countries.pinal cord injury in developing countries.)
  • Blenderfuge  + (Problem Scarcity of laboratory equipment iProblem</br>Scarcity of laboratory equipment in developing countries.</br> </br> </br>Summary</br>This microcentrifuge "combines a blender, an aluminum bowl and water-tap adapters..."</br> </br>Developers</br>Nataliel Mamani</br> </br>Website</br>Sustainable Sciences Institute</br> </br>References</br>Harris E. Building scientific capacity in developing countries. EMBO Rep. 2004 Jan;5(1):7-11.g countries. EMBO Rep. 2004 Jan;5(1):7-11.)
  • Antiretroviral Pouch  + (Problem being addressed)
  • Motivation Clip-On Tricycle Attachment  + (Problem being addressed: Many standard wheelchairs are not suitable for long distance travel over rough terrain, and those that can withstand prolonged use in these environments are often prohibitively expensive.)
  • Motivation Rough Terrain Wheelchair  + (Problem being addressed: Standard 4-wheel wheelchairs are effective for flat surfaces and can be manufactured inexpensively, but are not ideal for rural or rough terrain and are difficult to maneuver.)
  • Orthoplastics Reconstruction - Ex-Fix Simulation - Procedure Steps  + (Procedure steps- Ex Fix simulation)
  • Process  + (Process is the procedure for getting things done. Having an effective process means getting those things dones reliably, efficiently and effectively.)
  • Fruit waste utilisation (Practical Action Brief)  + (Processing fruit produces two types of wasProcessing fruit produces two types of waste: a solid waste of peel/skin, seeds, stones, etc, and a liquid waste of juice and washwaters. In some fruits the discarded portion can be very high (eg mango 30-50%, banana 20%, pineapple 40-50% and orange 30-50%). Therefore, there is often a serious waste disposal problem, which can lead to problems with flies and rats around the processing room, if not correctly dealt with. If there are no plans to use the waste it should be buried or fed to animals well away from the processing site.nimals well away from the processing site.)
  • Task scheduling optimization  + (Processor task scheduling using AI algorithms.)
  • Producing stone dust  + (Producing Stone Dust)
  • Rapid repurposing of pulp and paper mills, biorefineries, and breweries for lignocellulosic sugar production in global food catastrophes  + (Producing sugar from lignocellulosic biomaProducing sugar from lignocellulosic biomass is a promising resilient food solution to counter the near-total global failure of food production due to the agricultural collapse that would likely follow an abrupt sunlight reduction catastrophe such as a nuclear winter, a supervolcanic eruption, or a large asteroid or comet impact.tion, or a large asteroid or comet impact.)
  • Product Catalog Builder  + (Product Catalog Builder is a shareware tool for creating electronic catalog of products. This program can create an entry for each of products. It is possible to build a catalog of any size, or several catalogs, if needed.)
  • Missionaries and development workers  + (Programs for international aid and developPrograms for international aid and development can learn from from missionaries. Committed missionaries stay around until they know what they're doing. Project managers and donor representatives should have regional knowledge and language skills. They should be deeply steeped in local culture.should be deeply steeped in local culture.)
  • Renewable Energy in Canadian Aboriginal Remote Communities - Lit Review  + (Project Description: Renewable energy poliProject Description:</br>Renewable energy policy in the north</br><br>Finished Publications:</br>Technical feasibility of renewable electricity generation in Nunavut</br>For nomadic reindeer herders see: Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudesgenous nomadic communities in northern latitudes)
  • Laurel Tree Charter School project growth garden  + (Project Growth is a garden-to-kitchen systProject Growth is a garden-to-kitchen system designed in Cal Poly Humboldt's Engineering 215 class. The garden provides some salad greens for Laurel Tree Charter School's kitchen, while educating the primary age students about the importance of local agriculture. Applying the Montessori method of teaching, children will learn about gardening through hands on experience.out gardening through hands on experience.)
  • Progressive Vision Loss Glasses  + (Project Is Still in Development <center>'')
  • Project Rhotia  + (Project Rhotia Provides the resources to fProject Rhotia Provides the resources to further the education of students in the village of Rhotia, Tanzania; by establishing a computer class to teach computer skills, to expand their knowledge of the world through the Internet, and to build a relationship with a sponsor.nd to build a relationship with a sponsor.)
  • CCAT bike cage model  + (Project Type: Solar-Powered Bike Cage Design)
  • Designing for Play (Tolocar)  + (Project description)
  • Mech425 AT Project  + (Project description can be found at)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.