We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "Upgraded Spool Holder"

From Appropedia
Jump to navigation Jump to search
Line 49: Line 49:
 
==Link to Files==
 
==Link to Files==
 
The file repository is located on Thingiverse:
 
The file repository is located on Thingiverse:
[]
+
[http://www.thingiverse.com/thing:1949975 Link to project files and images.]
  
 
== Other Improved Spool Holder Ideas ==
 
== Other Improved Spool Holder Ideas ==

Revision as of 04:40, 8 December 2016

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Upgraded Spool Holder (MOST Delta: Athena)

This upgraded spool holder is made to be fully compatible with the current wire holding mount hardware included with the Athena Printer. The edges are rounded instead of square for better rolling/sliding on the surface. Also the larger size on the upgraded holder is stronger than the original spool holder.

Original Author: Zachary Verran


Ugraded Spool Holder Mounted.jpg

Design and Printing

Design

OpenSCAD was utilized for all modeling operations. Measurements were made to model the mounting bracket already on the printer. Then I designed my upgraded spool holder around this, subtracting the mount from the holder so I knew it would be compatible. The biggest different between the spool holder that is currently utilized on the printer and my upgraded version is the edges of the holder are rounded, making for easier rolling of the spool on the holder. Multiple iterations of trial and error with making the mount stay horizontal with the spool on it were printed, with the final version having a small rectangular protrusion jut out from one side to hold it in place.

The rounded edges of the holder were designed using an OpenScad file found online on Thingiverse. Thank you to user WilliamAAdams for this file. A combination of various sized rectangles based on the Thingiverse file and other primitive volumetric shapes were used to produce the final version.

Ugraded Spool Holder OpenScad.png

Printing

A bed of blue painters tape was used instead of the conventional glue on the glass bed method taught in class.

  • Print Parameters Utilized
    • Layer Thickness: 0.20mm
    • Shell Thickness: 1.0mm
    • Top/Bottom Thickness: 1.0mm
    • Temperature: 210C
    • Speed: 50mm/s
    • Flow: 100%
    • Infill: 20%
    • Filament: Yellow Push Plastic PLA 1.75mm

Installation

Upgraded Spool Holder Installation
Side facing the filament feed motor.  
Side facing the insert that gets screwed in. (Notice angled hole.)  
Fully installed (front).  
Fully installed (back).  
Fully installed with spool on holder.  

Link to Files

The file repository is located on Thingiverse: Link to project files and images.

Other Improved Spool Holder Ideas

  1. Put something here

See Also

Open Source 3-D Printing Athena Printer Build Overview MORE Delta Mods]