J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
(34 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{MOST}} | {{MOST}} | ||
{{Pearce-pubs}} | {{Pearce-pubs}} | ||
* Saravanan Vanal Krishnan, Sivakumar Palanivelu, Muthu Manickam Muthukaruppan Ambalam, Ragavendran Venkatesan, Muthukumar Arivalagan, Joshua M. Pearce, Jeyanthinath Mayandi, [https://doi.org/10.1515/zpch-2017-1075 | * Arvind Ravindran, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew R. Barnard and Joshua M. Pearce. Open Source Waste Plastic Granulator. ''Technologies'' 2019, 7(4), 74; https://doi.org/10.3390/technologies7040074 [https://www.academia.edu/40616354/Open_Source_Waste_Plastic_Granulator open access] | ||
* Ville Klar, Joshua M.Pearce, Pyry Kärki, Petri Kuosmanen, [https://www.sciencedirect.com/science/article/pii/S2468067219300471 Ystruder: open source multifunction extruder with sensing and monitoring capabilities]. ''HardwareX'' 6 (2019) e00080. https://doi.org/10.1016/j.ohx.2019.e00080 [https://www.academia.edu/40555880/Ystruder_Open_source_multifunction_extruder_with_sensing_and_monitoring_capabilities open access] | |||
* Niklas Kretzschmar, Sami Lipponen, Ville Klar, Joshua M. Pearce, Tom L. Ranger, Jukka Seppälä, and Jouni Partanen. Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites. ''3D Printing and Additive Manufacturing''. 6(3) 127-137, 2019. https://doi.org/10.1089/3dp.2018.0148 [https://www.academia.edu/39160225/Mechanical_Properties_of_Ultraviolet-Assisted_Paste_Extrusion_and_Postextrusion_Ultraviolet-Curing_of_Three-Dimensional_Printed_Biocomposites open access] | |||
* Matthew J. Reich, Aubrey L. Woern, Nagendra G. Tanikella, and Joshua M. Pearce. Mechanical Properties & Applications of Recycled Polycarbonate Particle Material Extrusion-based Additive Manufacturing. ''Materials'' 2019, 12(10), 1642; https://doi.org/10.3390/ma12101642 [https://www.academia.edu/39222715/Mechanical_Properties_and_Applications_of_Recycled_Polycarbonate_Particle_Material_Extrusion-Based_Additive_Manufacturing open access] | |||
* Ragavendran Venkatesan, Jeyanthinath Mayandi, Joshua M. Pearce, Vishnukanthan Venkatachalapathy. Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application. ''Journal of Materials Science: Materials in Electronics'' 30(9), pp 8676–8685 (2019). https://doi.org/10.1007/s10854-019-01191-6 [https://www.academia.edu/38751283/Influence_of_metal_assisted_chemical_etching_time_period_on_mesoporous_structure_in_as-cut_upgraded_metallurgical_grade_silicon_for_solar_cell_application open access] | |||
* Joshua M. Pearce, Maryam Khaksari, and David Denkenberger. [https://www.mdpi.com/2223-7747/8/5/110 Preliminary Automated Determination of Edibility of Alternative Foods: Non-Targeted Screening for Toxins in Red Maple Leaf Concentrate]. ''Plants'' 2019, 8(5), 110; https://doi.org/10.3390/plants8050110 [https://www.academia.edu/38936253/Preliminary_Automated_Determination_of_Edibility_of_Alternative_Foods_Non-Targeted_Screening_for_Toxins_in_Red_Maple_Leaf_Concentrate open access] | |||
* R.Selvapriya, J.Mayandi, V.Ragavendran, V.Sasirekha,J.Vinodhini, J.M.Pearce. [https://www.sciencedirect.com/science/article/pii/S0272884219300082 Dual Morphology Titanium Dioxide for Dye Sensitized Solar Cells]. ''Ceramics International'' 45(6),7268-7277 (2019). https://doi.org/10.1016/j.ceramint.2019.01.008 [https://www.academia.edu/38385827/Dual_morphology_titanium_dioxide_for_dye_sensitized_solar_cells open access] | |||
* Lyes Azzouz, Yong Chen, Mauro Zarrelli, Joshua M.Pearce, Leslie Mitchell, Guogang Ren, Marzio Grasso. [https://www.sciencedirect.com/science/article/pii/S0263822318341497 Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins], ''Composite Structures'' 213:220-230 (2019).https://doi.org/10.1016/j.compstruct.2019.01.103 [https://www.academia.edu/38273631/Mechanical_properties_of_3-D_printed_truss-like_lattice_biopolymer_non-stochastic_structures_for_sandwich_panels_with_natural_fibre_composite_skins open access] | |||
* J.Vinodhini, J.Mayandi, R.Atchudan, P.Jayabal, V.Sasirekha, J.M.Pearce. Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells. ''Ceramics International'' 45(4), 4667-4673 (2019). https://doi.org/10.1016/j.ceramint.2018.11.157 [https://www.academia.edu/38259270/Effect_of_microwave_power_irradiation_on_TiO2_nano-structures_and_binder_free_paste_screen_printed_dye_sensitized_solar_cells open access] | |||
* Kexun Chen, Jiawei Zha, Fenqin Hu, Xiaoya Ye, Shuai Zou, Ville Vähänissi, Joshua M.Pearce, Hele Savin, Xiaodong Su, [https://doi.org/10.1016/j.solmat.2018.10.015 MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells].''Solar Energy Materials and Solar Cells''191, March 2019, pp. 1-8. https://doi.org/10.1016/j.solmat.2018.10.015 [https://www.academia.edu/37761273/MACE_nano-texture_process_applicable_for_both_single-_and_multi-crystalline_diamond-wire_sawn_Si_solar_cells open access] | |||
* Adam M. Pringle, Mark Rudnicki, and Joshua Pearce (2017) Wood Furniture Waste-Based Recycled 3-D Printing Filament. ''Forest Products Journal'' 2018, Vol. 68, No. 1, pp. 86-95. https://doi.org/10.13073/FPJ-D-17-00042 [https://www.academia.edu/37662455/Wood_Furniture_Waste-Based_Recycled_3-D_Printing_Filament open access] | |||
* T.P.Pasanen, G.von Gastrow, I.T.S.Heikkinen, V.Vähänissi, H.Savin, J.M.Pearce. [https://doi.org/10.1016/j.mssp.2018.08.027 Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing]. ''Materials Science in Semiconductor Processing'' 89 (2019), pp. 59-67. https://doi.org/10.1016/j.mssp.2018.08.027 [https://www.academia.edu/37346428/Compatibility_of_3-D_Printed_Devices_in_Cleanroom_Environments_for_Semiconductor_Processing open access] | |||
* Woern, A.L.; Byard, D.J.; Oakley, R.B.; Fiedler, M.J.; Snabes, S.L.; Pearce, J.M. Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties. ''Materials'' '''2018''', 11, 1413. doi: https://doi.org/10.3390/ma11081413 [https://www.academia.edu/37223823/Fused_Particle_Fabrication_3-D_Printing_Recycled_Materials_Optimization_and_Mechanical_Properties open access] | |||
* Nupur Bihari, Smruti Prasad Dash, Karankumar C. Dhankani, Joshua M. Pearce. 3-D printable open source dual axis gimbal system for optoelectronic measurements. ''Mechatronics'' (in press) DOI: https://doi.org/10.1016/j.mechatronics.2018.07.005 | |||
* Ismo T. S. Heikkinen, Christoffer Kauppinen, Zhengjun Liu, Sanja M. Asikainen, Steven Spoljaric, Jukka V. Seppälä, Hele Savin, and Joshua M. Pearce. Chemical Compatibility of Fused Filament Fabrication -based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing. ''Additive Manufacturing'' 23, pp. 99-107 (2018). DOI: https://doi.org/10.1016/j.addma.2018.07.015 [https://www.academia.edu/37171248/Chemical_Compatibility_of_Fused_Filament_Fabrication-based_3-D_Printed_Components_with_Solutions_Commonly_Used_in_Semiconductor_Wet_Processing open access] | |||
* Aubrey L. Woern, Joseph R. McCaslin, Adam M. Pringle, and Joshua M. Pearce. RepRapable Recyclebot: Open Source 3-D Printable Extruder for Converting Plastic to 3-D Printing Filament. ''HardwareX'' 4C (2018) e00026 doi: https://doi.org/10.1016/j.ohx.2018.e00026 [https://www.academia.edu/36721604/RepRapable_Recyclebot_Open_source_3-D_printable_extruder_for_converting_plastic_to_3-D_printing_filament open access] | |||
* Wijnen, B., Sanders, P. & Pearce, J.M. Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid. ''Progress in Additive Manufacturing'' 3(4), pp. 193–203 (2018). https://doi.org/10.1007/s40964-018-0052-4 [https://www.academia.edu/37894633/Improved_Model_and_Experimental_Validation_of_Deformation_in_Fused_Filament_Fabrication_of_Poly_Lactic_Acid open access] | |||
* Saravanan Vanal Krishnan, Sivakumar Palanivelu, Muthu Manickam Muthukaruppan Ambalam, Ragavendran Venkatesan, Muthukumar Arivalagan, Joshua M. Pearce, Jeyanthinath Mayandi, [https://doi.org/10.1515/zpch-2017-1075 Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies] ''Zeitschrift für Physikalische Chemie'', 232(12), (2018) 1827–1842. DOI: https://doi.org/10.1515/zpch-2017-1075 | |||
* John J. Laureto and Joshua M. Pearce. [https://doi.org/10.1016/j.polymertesting.2018.04.029 Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens]. ''Polymer Testing'' 68: 294-301 (2018). DOI: 10.1016/j.polymertesting.2018.04.029 [https://www.academia.edu/36496554/Anisotropic_Mechanical_Property_Variance_Between_ASTM_D638-14_Type_I_and_Type_IV_Fused_Filament_Fabricated_Specimens open access] | |||
* Joshua M. Pearce [https://doi.org/10.1016/j.mattod.2018.02.002 Expanding the Consumer Bill of Rights for material ingredients]. ''Materials Today'' 21(3), pp. 197-198 (2018). DOI: https://doi.org/10.1016/j.mattod.2018.02.002 [https://www.academia.edu/36484688/Expanding_the_Consumer_Bill_of_Rights_for_Material_Ingredients Open access preprint] | |||
* M. Marikkannan, A. Dinesh, J. Mayandi, V. Vishnukanthan, J.M. Pearce. [https://doi.org/10.1016/j.matlet.2018.03.097 Properties of Al-Doped Zinc Oxide and In-Doped Zinc Oxide Bilayer Transparent Conducting Oxides for Solar Cell Applications] ''Materials Express''. 222, (2018) pp. 50-53. doi:10.1016/j.matlet.2018.03.097 [https://www.academia.edu/36306727/Properties_of_Al-Doped_Zinc_Oxide_and_In-Doped_Zinc_Oxide_Bilayer_Transparent_Conducting_Oxides_towards_Solar_Cell_Applications open access preprint] | |||
* Ragavendran Venkatesan, Muthu Kumar Arivalagan, Vishnukanthan Venkatachalapathy, Joshua M. Pearce, Jeyanthinath Mayandi, [https://www.sciencedirect.com/science/article/pii/S0167577X18304178 Effects of silver catalyst concentration in metal assisted chemical etching of silicon] , ''Materials Express''. 221, 15 (2018), pp. 206-210. doi: https://doi.org/10.1016/j.matlet.2018.03.053 [https://www.academia.edu/36294660/Effects_of_silver_catalyst_concentration_in_metal_assisted_chemical_etching_of_silicon open access] | |||
* Ştefan Ţălu, Slawomir Kulesza, Miroslaw Bramowicz, Adam M. Pringle, Joshua M. Pearce, M. Marikkannan, V. Vishnukanthang, J. Mayandi. [https://doi.org/10.1016/j.matlet.2018.03.005 Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations]. ''Materials Express''. 220 (2018), 169–171. doi:10.1016/j.matlet.2018.03.005 [https://www.academia.edu/36214749/Micromorphology_analysis_of_sputtered_indium_tin_oxide_fabricated_with_variable_ambient_combinations open access preprint] | |||
* L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S221486041730012X Open-source parametric 3-D printed slot die system for thin film semiconductor processing]. ''Additive Manufacturing'' 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 [https://www.academia.edu/35667969/Open-source_Parametric_3-D_Printed_Slot_Die_System_for_Thin_Film_Semiconductor_Processing open access] | * L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S221486041730012X Open-source parametric 3-D printed slot die system for thin film semiconductor processing]. ''Additive Manufacturing'' 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 [https://www.academia.edu/35667969/Open-source_Parametric_3-D_Printed_Slot_Die_System_for_Thin_Film_Semiconductor_Processing open access] | ||
* A. Chandrasekaran, T. Prasankumar, Sujin P Jose, K. Anitha, C. Ekstrum, J. M. Pearce, J. Mayandi. “Synthetic method dependent physico-chemical properties and electrochemical performance of Ni doped ZnO”, ''Chemistry Select'' 2(28), 2017, pp. 9014–9023. doi: https://doi.org/10.1002/slct.201701584 [https://www.academia.edu/34837139/Synthetic_method_dependent_physico-_chemical_properties_and_electrochemical_performance_of_Ni_doped_Synthetic_method_dependent_physico-chemical_properties_and_electrochemical_performance_of_Ni_doped_ZnO open access] | * A. Chandrasekaran, T. Prasankumar, Sujin P Jose, K. Anitha, C. Ekstrum, J. M. Pearce, J. Mayandi. “Synthetic method dependent physico-chemical properties and electrochemical performance of Ni doped ZnO”, ''Chemistry Select'' 2(28), 2017, pp. 9014–9023. doi: https://doi.org/10.1002/slct.201701584 [https://www.academia.edu/34837139/Synthetic_method_dependent_physico-_chemical_properties_and_electrochemical_performance_of_Ni_doped_Synthetic_method_dependent_physico-chemical_properties_and_electrochemical_performance_of_Ni_doped_ZnO open access] |
Revision as of 11:09, 14 October 2019
- Arvind Ravindran, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew R. Barnard and Joshua M. Pearce. Open Source Waste Plastic Granulator. Technologies 2019, 7(4), 74; https://doi.org/10.3390/technologies7040074 open access
- Ville Klar, Joshua M.Pearce, Pyry Kärki, Petri Kuosmanen, Ystruder: open source multifunction extruder with sensing and monitoring capabilities. HardwareX 6 (2019) e00080. https://doi.org/10.1016/j.ohx.2019.e00080 open access
- Niklas Kretzschmar, Sami Lipponen, Ville Klar, Joshua M. Pearce, Tom L. Ranger, Jukka Seppälä, and Jouni Partanen. Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites. 3D Printing and Additive Manufacturing. 6(3) 127-137, 2019. https://doi.org/10.1089/3dp.2018.0148 open access
- Matthew J. Reich, Aubrey L. Woern, Nagendra G. Tanikella, and Joshua M. Pearce. Mechanical Properties & Applications of Recycled Polycarbonate Particle Material Extrusion-based Additive Manufacturing. Materials 2019, 12(10), 1642; https://doi.org/10.3390/ma12101642 open access
- Ragavendran Venkatesan, Jeyanthinath Mayandi, Joshua M. Pearce, Vishnukanthan Venkatachalapathy. Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application. Journal of Materials Science: Materials in Electronics 30(9), pp 8676–8685 (2019). https://doi.org/10.1007/s10854-019-01191-6 open access
- Joshua M. Pearce, Maryam Khaksari, and David Denkenberger. Preliminary Automated Determination of Edibility of Alternative Foods: Non-Targeted Screening for Toxins in Red Maple Leaf Concentrate. Plants 2019, 8(5), 110; https://doi.org/10.3390/plants8050110 open access
- R.Selvapriya, J.Mayandi, V.Ragavendran, V.Sasirekha,J.Vinodhini, J.M.Pearce. Dual Morphology Titanium Dioxide for Dye Sensitized Solar Cells. Ceramics International 45(6),7268-7277 (2019). https://doi.org/10.1016/j.ceramint.2019.01.008 open access
- Lyes Azzouz, Yong Chen, Mauro Zarrelli, Joshua M.Pearce, Leslie Mitchell, Guogang Ren, Marzio Grasso. Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins, Composite Structures 213:220-230 (2019).https://doi.org/10.1016/j.compstruct.2019.01.103 open access
- J.Vinodhini, J.Mayandi, R.Atchudan, P.Jayabal, V.Sasirekha, J.M.Pearce. Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells. Ceramics International 45(4), 4667-4673 (2019). https://doi.org/10.1016/j.ceramint.2018.11.157 open access
- Kexun Chen, Jiawei Zha, Fenqin Hu, Xiaoya Ye, Shuai Zou, Ville Vähänissi, Joshua M.Pearce, Hele Savin, Xiaodong Su, MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells.Solar Energy Materials and Solar Cells191, March 2019, pp. 1-8. https://doi.org/10.1016/j.solmat.2018.10.015 open access
- Adam M. Pringle, Mark Rudnicki, and Joshua Pearce (2017) Wood Furniture Waste-Based Recycled 3-D Printing Filament. Forest Products Journal 2018, Vol. 68, No. 1, pp. 86-95. https://doi.org/10.13073/FPJ-D-17-00042 open access
- T.P.Pasanen, G.von Gastrow, I.T.S.Heikkinen, V.Vähänissi, H.Savin, J.M.Pearce. Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing. Materials Science in Semiconductor Processing 89 (2019), pp. 59-67. https://doi.org/10.1016/j.mssp.2018.08.027 open access
- Woern, A.L.; Byard, D.J.; Oakley, R.B.; Fiedler, M.J.; Snabes, S.L.; Pearce, J.M. Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties. Materials 2018, 11, 1413. doi: https://doi.org/10.3390/ma11081413 open access
- Nupur Bihari, Smruti Prasad Dash, Karankumar C. Dhankani, Joshua M. Pearce. 3-D printable open source dual axis gimbal system for optoelectronic measurements. Mechatronics (in press) DOI: https://doi.org/10.1016/j.mechatronics.2018.07.005
- Ismo T. S. Heikkinen, Christoffer Kauppinen, Zhengjun Liu, Sanja M. Asikainen, Steven Spoljaric, Jukka V. Seppälä, Hele Savin, and Joshua M. Pearce. Chemical Compatibility of Fused Filament Fabrication -based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing. Additive Manufacturing 23, pp. 99-107 (2018). DOI: https://doi.org/10.1016/j.addma.2018.07.015 open access
- Aubrey L. Woern, Joseph R. McCaslin, Adam M. Pringle, and Joshua M. Pearce. RepRapable Recyclebot: Open Source 3-D Printable Extruder for Converting Plastic to 3-D Printing Filament. HardwareX 4C (2018) e00026 doi: https://doi.org/10.1016/j.ohx.2018.e00026 open access
- Wijnen, B., Sanders, P. & Pearce, J.M. Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid. Progress in Additive Manufacturing 3(4), pp. 193–203 (2018). https://doi.org/10.1007/s40964-018-0052-4 open access
- Saravanan Vanal Krishnan, Sivakumar Palanivelu, Muthu Manickam Muthukaruppan Ambalam, Ragavendran Venkatesan, Muthukumar Arivalagan, Joshua M. Pearce, Jeyanthinath Mayandi, Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies Zeitschrift für Physikalische Chemie, 232(12), (2018) 1827–1842. DOI: https://doi.org/10.1515/zpch-2017-1075
- John J. Laureto and Joshua M. Pearce. Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens. Polymer Testing 68: 294-301 (2018). DOI: 10.1016/j.polymertesting.2018.04.029 open access
- Joshua M. Pearce Expanding the Consumer Bill of Rights for material ingredients. Materials Today 21(3), pp. 197-198 (2018). DOI: https://doi.org/10.1016/j.mattod.2018.02.002 Open access preprint
- M. Marikkannan, A. Dinesh, J. Mayandi, V. Vishnukanthan, J.M. Pearce. Properties of Al-Doped Zinc Oxide and In-Doped Zinc Oxide Bilayer Transparent Conducting Oxides for Solar Cell Applications Materials Express. 222, (2018) pp. 50-53. doi:10.1016/j.matlet.2018.03.097 open access preprint
- Ragavendran Venkatesan, Muthu Kumar Arivalagan, Vishnukanthan Venkatachalapathy, Joshua M. Pearce, Jeyanthinath Mayandi, Effects of silver catalyst concentration in metal assisted chemical etching of silicon , Materials Express. 221, 15 (2018), pp. 206-210. doi: https://doi.org/10.1016/j.matlet.2018.03.053 open access
- Ştefan Ţălu, Slawomir Kulesza, Miroslaw Bramowicz, Adam M. Pringle, Joshua M. Pearce, M. Marikkannan, V. Vishnukanthang, J. Mayandi. Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations. Materials Express. 220 (2018), 169–171. doi:10.1016/j.matlet.2018.03.005 open access preprint
- L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. Open-source parametric 3-D printed slot die system for thin film semiconductor processing. Additive Manufacturing 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 open access
- A. Chandrasekaran, T. Prasankumar, Sujin P Jose, K. Anitha, C. Ekstrum, J. M. Pearce, J. Mayandi. “Synthetic method dependent physico-chemical properties and electrochemical performance of Ni doped ZnO”, Chemistry Select 2(28), 2017, pp. 9014–9023. doi: https://doi.org/10.1002/slct.201701584 open access
- Jephias Gwamuri, Ragavendran Venkatesan, Mehdi Sadatdol, Jeyanthinath Mayandi , Durdu O. Guney, Joshua M. Pearce, Ambient-dependent Agglomeration and Surface-Enhanced Raman Spectroscopy Response of Self-Assembled Silver Nano-particles for Plasmonic Photovoltaic Devices, Journal of Photonics for Energy 7(3), 037002 (2017), doi: 10.1117/1.JPE.7.037002 open access
- Chenlong Zhang, Sandra Cvetanovic, Joshua M. Pearce. Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography. MethodsX 4, 2017, pp. 229-242. DOI:10.1016/j.mex. open access
- A. Chandrasekaran, J. Mayandi, J. Osborne, M. Frost, C. Ekstrum, J. M. Pearce. Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates” Materials Research Express 4(7) 075401. https://doi.org/10.1088/2053-1591/aa796d open access
- Sangeetha Periasamy, Sasirekha Venkidusamy, Ragavendran Venkatesan, Jeyanthinath Mayandi, Joshua Pearce, Josefine Helene Selj, Ramakrishnan Veerabahu. Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon. Zeitschrift für Physikalische Chemie.231(9), pp. 1585-1598 (2017). DOI: https://doi.org/10.1515/zpch-2016-0961 open access
- John Laureto, Julie Tomasi, Julia A. King, Joshua M. Pearce. Thermal properties of 3-D printed polylactic acid-metal composites, Progress in Additive Manufacturing 2(1), 57-71 (2017). doi:10.1007/s40964-017-0019-x open access
- Nagendra G. Tanikella, Ben Wittbrodt and Joshua M. Pearce. Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing. Additive Manufacturing 15: pp. 40–47 (2017). DOI: 10.1016/j.addma.2017.03.005 open access
- Haselhuhn, A.S., Sanders, P.G. & Pearce, J.M. Hypoeutectic Aluminum–Silicon Alloy Development for GMAW-Based 3-D Printing Using Wedge Castings International Journal of Metalcasting 11(4) 843-856(2017). doi:10.1007/s40962-017-0133-z open access
- Handy Chandra, Spencer W. Allen, Shane W. Oberloier, Nupur Bihari, Jephias Gwamuri and Joshua M. Pearce. Open-Source Automated Mapping Four-Point Probe. Materials 2017, 10(2), 110. doi: 10.3390/ma10020110 open access
- C. Abinaya, M. Marikkannan, M. Manikandan, J. Mayandi, P. Suresh, V. Shanmugaiah, C. Ekstrum, J.M. Pearce, Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides. Materials Chemistry and Physics 184 (2016), pp. 172–182. http://dx.doi.org/10.1016/j.matchemphys.2016.09.039 open access
- Amberlee S. Haselhuhn, Michael W. Buhr, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce, Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing. Materials Science and Engineering: A, 673, pp. 511–523 (2016). DOI: http://dx.doi.org/10.1016/j.msea.2016.07.099 open access
- Joshua M. Pearce (Ed.). Photovoltaic Materials and Electronic Devices, MDPI; Basel Switzerland. 2016. http://www.mdpi.com/books/pdfview/book/213 open access
- Jephias Gwamuri, Ankit Vora, Jeyanthinath Mayandi, Durdu Ö. Güney, Paul L. Bergstrom, Joshua M. Pearce. A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices. Solar Energy Materials and Solar Cells 149,(2016): 250–257. doi: 10.1016/j.solmat.2016.01.028 free open access
- Jephias Gwamuri, Murugesan Marikkannan, Jeyanthinath Mayandi, Patrick K. Bowen, and Joshua M. Pearce. Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices. Materials, 9(1), 63 (2016). doi: http://dx.doi.org/10.3390/ma9010063 free download
- Selvaraj, M., Venkatachalapathy, V., Mayandi, J., Karazhanov, S. and Pearce, J. M., Preparation of meta-stable phases of barium titanate by sol-hydrothermal method. AIP Advances, 5, 117119 (2015), DOI:http://dx.doi.org/10.1063/1.4935645 open access
- Wittbrodt, B., & Pearce, J. M. (2015). The Effects of PLA Color on Material Properties of 3-D Printed Components. Additive Manufacturing. 8, 110–116 (2015). DOI: http://dx.doi.org/10.1016/j.addma.2015.09.006 open access
- Jephias Gwamuri, Ankit Vora, Rajendra R. Khanal, Adam B. Phillips, Michael J. Heben, Durdu O. Guney, Paul Bergstrom,Anand Kulkarni, Joshua M. Pearce. Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices. Materials for Renewable and Sustainable Energy 4:12 (2015). DOI: 10.1007/s40243-015-0055-8 open access
- M. Prabhu, J. Mayandi, R. N. Mariammal, V. Vishnukanthan, J. M. Pearce, N. Soundararajan and K. Ramachandran. Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells. Materials Research Express 2(6): 066202 (2015). doi:10.1088/2053-1591/2/6/066202 open access
- Marikkannan, M., Vishnukanthan, V., Vijayshankar, A., Mayandi, J. and Pearce, J. M., A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications.AIP Advances, 5, 027122 (2015), DOI:http://dx.doi.org/10.1063/1.4909542 open access
- Marikkannan, M. and Subramanian, M. and Mayandi, J. and Tanemura, M. and Vishnukanthan, V. and Pearce, J. M., Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films, AIP Advances, 5, 017128 (2015), DOI:http://dx.doi.org/10.1063/1.4906566 open access
- B.M. Tymrak, M. Kreiger, J. M. Pearce, Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions, Materials & Design, 58, pp. 242-246 (2014). open access
- R. W. Andrews, A. Pollard, J. M. Pearce, A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules. Solar Energy Materials and Solar Cells 113 (2013) 71–78. open access
- Dirk V. P. McLaughlin and J.M. Pearce, “Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells”, Materials Science and Engineering: B, 177, 239-244 (2012). open access arXiv
- Devproshad K. Paul, Andrew Fraser, Joshua Pearce and Kunal Karan, “ Understanding the Ionomer Structure and the Proton Conduction Mechanism in PEFC Catalyst Layer: Adsorbed Nafion on Model Substrate ”, ECS Transactions, 41(1) 1393-1406 (2011) .
- S. Keating, M.G. Urquhart, D.V.P. McLaughlin and J.M.Pearce, “Effects of Substrate Temperature on Indium Gallium Nitride Nanocolumn Crystal Growth ”, Crystal Growth & Design, 11 (2), pp 565–568, 2011. open access
- M. Einav, D.V.P. McLaughlin and J. M. Pearce. “Bandgap and Microstructural Engineering of InGaN for Solar Photovoltaic Applications” ISPlasma 2011 Proceedings, 3rd International Symposium on Advanced Plasma Science, March 2011, Nagoya, Japan. P3-087A-LN.
- D. K. Paul, A. Fraser, J. Pearce, and K. Karan, “Nafion Adsorption on Model Surface: Characterization by Variable Angle Spectroscopic Ellipsometry (VASE)”, Meet. Abstr. - Electrochem. Soc. 1101, 631 (2011).
- M.L. Albert, J. Deng, X.Niu, J. M. Pearce, R. W. Collins, and C. R. Wronski, "The Creation and Relaxation Kinetics of Light Induced Defects in a-Si:H Located at Different Energies in the Gap", Mater. Res. Soc. Symp. Proc., 862, A13.2, 2005.
- J. Deng, M. L. Albert, J. M. Pearce, R. W. Collins, and C. R. Wronski, "The Nature of Native and Light Induced Defect States in i-layers of High Quality a-Si:H Solar Cells Derived from Dark Forward Bias Current-Voltage Characteristics", Mater. Res. Soc. Symp. Proc., 862, A11.4, 2005.
- G.M. Ferreira, A.S. Ferlauto, Chi Chen, R.J. Koval, J.M. Pearce, C. Ross, C.R. Wronski and R.W. Collins, "Kinetics of Silicon Film Growth and the Deposition Phase Diagram", Journal of Non-Crystalline Solids, 338-340, pp. 13-18, 2004.
- A. S. Ferlauto, G. M. Ferreira, J. M. Pearce, C. R. Wronski, R. W. Collins, X. Deng and G. Ganguly, "Analytical Model for the Optical Functions of Amorphous Semiconductors and Its Applications in Thin Film Photovoltaics", Thin Solid Films 455-456, pp. 388-392, 2004.
- A. S. Ferlauto, G. M. Ferreira, R. J. Koval, J. M. Pearce, C. R. Wronski, R. W. Collins, M. M. Al-Jassim, and K. M. Jones, "Evaluation of Compositional Depth Profiles in Mixed Phase (Amorphous + Crystalline) Silicon Films from Real Time Spectroscopic Ellipsometry", Thin Solid Films 455-456, pp. 665-669, 2004.
- C. R. Wronski, J. M. Pearce, J. Deng, V. Vlahos, and R. W. Collins, "Intrinsic and Light Induced Gap States in a-Si:H Materials and Solar Cells - Effects of Microstructure", Thin Solid Films, 451-452 pp. 470-475, 2004.
- G.M. Ferreira, A.S. Ferlauto, J.M. Pearce, C.R. Wronski, C. Ross, and R.W. Collins, "Comparison of Phase Diagrams for vhf and rf Plasma-Enhanced Chemical Vapor Deposition of Si:H Films", Mat. Res. Soc. Symp. Proc. 808, A5.2, 2004.
- J. M. Pearce, V. Vlahos, J. Deng, R. W. Collins, C. R. Wronski, J. Whitaker and P. C. Taylor, "Evolution of D0 and non-D0 Light Induced Defect States in a-Si:H Materials and Their Respective Contribution to Carrier Recombination", Mat. Res. Soc. Symp. Proc. 808, A2.5, 2004.
- J. M. Pearce, J. Deng, R. W. Collins, and C. R. Wronski, "Light Induced Defect States in Hydrogenated Amorphous Silicon Centered Around 1.05 and 1.2eV from the Conduction Band Edge", Applied Physics Letters, 83(18), pp. 3725-3727, 2003. open access
- R.W. Collins, A.S. Ferlauto, G.M. Ferreira, C. Chen, J. Koh, R.J. Koval, Y. Lee, J.M. Pearce, and C. R. Wronski, "Evolution of microstructure and phase in amorphous, protocrystalline, and microcrystalline silicon studied by real time spectroscopic ellipsometry", Solar Energy Materials and Solar Cells, 78(1-4), pp. 143-180, 2003.
- A.S. Ferlauto, G.M. Ferreira, R.J. Koval, J. M. Pearce, C.R. Wronski, and R.W. Collins, "Evolution of Crystallinity in Mixed-phase (a+mc)-Si:H as Determined by Real Time Ellipsometry", Mat. Res. Soc. Symp. Proc. 762, A5.10, 2003.
- R.W. Collins, A.S. Ferlauto, G.M. Ferreira, J. Koh, C. Chen, R.J. Koval, J.M. Pearce, C.R. Wronski, M.M. Al-Jassim, and K.M. Jones, "Application of Deposition Phase Diagrams for the Optimization of a-Si:H-Based Materials and Solar Cells" Mat. Res. Soc. Symp. Proc.,762, A10.1, 2003.
- J. M. Pearce, J. Deng, V. Vlahos, R. W. Collins, and C. R. Wronski, "Light Induced Changes in Two Distinct Defect States At and Below Midgap in a-Si:H", Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, 5O-D14-01, 2003. open access
- C. R. Wronski, R. W. Collins, J. M. Pearce, J. Deng, V. Vlahos, G. M. Ferreira, and C. Chen, "Optimization of Phase-Engineered a-Si:H-Based Multijunction Solar Cells", National Center for Photovoltaics Program Review and Solar Program Proceedings, February 2003, NREL/CD-520-33586 pp. 789-792.
- R. W. Collins, G.M. Ferreira, J. M. Pearce, A. S. Ferlauto, R. J. Koval, and C. R. Wronski, "Real Time Optics of the Growth of Silicon Thin Films in Photovoltaics: Analysis of the Amorphous-to-Microcrystalline Phase Transition", National Center for Photovoltaics Program Review and Solar Program Proceedings, February 2003, NREL/CD-520-33586 pp. 772-775.
- R. W. Collins, G. M. Ferreira, A. S. Ferlauto, R. J. Koval, J. M. Pearce, C. R. Wronski, M. M. Al-Jassim, and K. M. Jones, "Thickness evolution of the microstructure of Si:H films in the amorphous-to-microcrystalline phase transition", Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, S2O-B6-02, 2003.
- A. S. Ferlauto, G. M. Ferreira, J. M. Pearce, C.R. Wronski, R. W. Collins, Xunming Deng, and Gautam Ganguly, "Analytical model for the optical functions of amorphous semiconductors from the near-infrared to ultraviolet: Applications in thin film photovoltaics", Journal of Applied Physics, 92(5), 2424-2436, 2002. pdf
- C.R. Wronski, J. M. Pearce, R. J. Koval, X. Niu, A. S. Ferlauto, J. Koh, and R. W. Collins "Light Induced Defect Creation Kinetics in Thin Film Protocrystalline Silicon Materials and Their Solar Cells" Mat. Res. Soc. Symp. Proc. 715, A13.4, 2002.
- A. S. Ferlauto, G.M. Ferreira, R.J. Koval, J.M. Pearce, C.R. Wronski, R. W. Collins, M.M. Al-Jassim, and K.M. Jones, "Thickness Evolution of the Microstructural and Optical Properties of Si:H Films in the Amorphous-to-Microcrystalline Phase Transition Region" 29th IEEE Photovoltaic Specialists Conf. Proc., (IEEE, 2002) pp. 1076-1081, 2002. open access
- J. M. Pearce, R. J. Koval, X. Niu, S. J. May, R.W. Collins, and C. R. Wronski, "The 'Fast' and 'Slow' Light Induced Defects in Diluted and Undiluted Hydrogenated Amorphous Silicon Solar Cells and Materials", 17th European Photovoltaic Solar Energy Conference Proceedings, 3, pp. 2842-2845, 2002.open access
- J. Pearce, X. Niu, R. Koval, G. Ganguly, D. Carlson, R.W. Collins, C.R. Wronski, "Contributions of DO and non-DO gap states to the kinetics of light induced degradation of amorphous silicon under 1 sun illumination", Mat. Res. Soc. Symp. Proc., 664, A12.3, 2001.
- J. M. Pearce, R. J. Koval, A.S. Ferlauto, R. W. Collins, and C. R. Wronski, "Limitations of Bulk Generation-Recombination on Open Circuit Voltage under 1 Sun Illumination in Amorphous Silicon Solar Cells", Technical Digest of the 12th International Photovoltaic Science and Engineering Conference, pp. 251-252, 2001.
- Christopher R. Wronski, Joshua M. Pearce, Randy J. Koval, Robert W. Collins, "Metastability in Hydrogenated Amorphous Based Materials and Solar Cells", Technical Digest of the 12th International Photovoltaic Science and Engineering Conference, pp. 33-36, 2001.
- R. J. Koval, J. M. Pearce, A.S. Ferlauto, J. Koh, R.W. Collins, and C.R. Wronski, "Evolution of Optoelectronic Properties of Hydrogen Diluted Si:H Materials and their Effect on Solar Cell Characteristics, Technical Digest, Review meeting for Research with Overseas Research Institutes, pp. 9-16, February 2, 2001.
- C.R. Wronski, R.J. Koval, J. M. Pearce, A.S. Ferlauto, J. Koh, and R. W. Collins, "Protocrystalline Phase Transitions in Si:H Materials and Their Effect on Solar Cell Characteristics", 11th Workshop on Crystalline Silicon Cell Materials and Processes, NREL/BK-520-30838, pp 93-94, August 19-22, 2001.
- R. W. Collins, A.S. Ferlauto, R. J. Koval, J. M. Pearce, P.I. Rovira, and C. R. Wronski, "Insights for Improvement of Silicon-based Solar Cells from Real Time Optics Studies", Technical Digest, Review meeting for Research with Overseas Research Institutes, pp. 1-8, February 2, 2001.
- R.W. Collins, A.S. Ferlauto, R.J. Koval, J.M. Pearce, and C.R. Wronski, "Progress in High Stability Amorphous Silicon-Based Solar Cells with Guidance from Real Time Optics", National Center for Photovoltaics Program Review Proceedings, 2001, pp.21-22.
- R. J. Koval, A. S. Ferlauto, P. I. Rovira, X. Niu, J. Pearce, R. W. Collins, C. R. Wronski, "Optimization of protocrystalline Si:H Materials and Fabrication of Stable High-Performance Solar Cells", National Center for Photovoltaics Program Review Proceedings, April 2000, p. 215.
- Randy Koval, Xinwei Niu, Joshua Pearce, Lihong Jiao, Gautam Ganguly, Jeffrey Yang, Subhendu Guha, Robert W. Collins, Christopher R. Wronski, "Kinetics of Light Induced Changes in Protocrystalline Thin Film Materials and Solar Cells", Mat. Res. Soc. Symp. Proc., 609, A15.5, 2000.