Sophivorus (talk | contribs) m (Text replacement - "{{#widget:YouTube\|id=([^}]+)}}" to "{{Video|$1}}") |
Fionaconnor (talk | contribs) No edit summary |
||
Line 14: | Line 14: | ||
|manifest-language=eng | |manifest-language=eng | ||
|documentation-language=English | |documentation-language=English | ||
|countries-of-design=Category:United States | |||
|project-afiliation=Category:MTU, Category:MOST | |||
|main-materials=Plastic | |main-materials=Plastic | ||
|estimated-cost-amount=2.88 | |||
|sustainable-development-goal=Sustainable Development Goal 15, Sustainable Development Goal 2 | |sustainable-development-goal=Sustainable Development Goal 15, Sustainable Development Goal 2 | ||
|manifest-autho-email=info@appropedia.org | |manifest-autho-email=info@appropedia.org |
Revision as of 04:16, 15 September 2020
Hand Cultivator
Created by Matthew Andres Template:Statusboxtop Template:Status-design Template:Status-prototype Template:Status-Model Template:Status-verified Template:Boxbottom
Abstract
- This OSAT is a hand cultivator. It is used to clear land and to assist in gardening tasks. This is an appropriate tool because it assists in making a better garden that will produce more crops. According to Midwest Gardening [1] cultivating has many benefits. They state that cultivating allows easier penetration of air, nutrients and water into the sun and wind dried soil. Cultivating also remove weeds that steal water and nutrients from the plants. Less supplemental watering is also a benefit gained from cultivating. By using a plastic tool, there is the benefit of the tool never rusting and allows for easy cleaning.
- A Completed Hand Cultivator can be seen on the right
- Link to Thingiverse page where customization can be done to the tool: http://www.thingiverse.com/thing:1158335/#files
Bill of Materials
CAD Files
STL
Extra Parts
- There are not other parts needed for this tool.
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and Knowledge Necessary to Make the OSAT
- There is no special skills needed to make this tool.
Technical Specifications and Assembly Instructions
- If any changes to the design want to be done, open the SCAD file and adjust the parameters.
- Slicing instructions
- Fill % = 100
- Speed = 50 mm/sec
- Layer Height = .12 mm
- No support Needed
- I recommend using a brim on the print
- Make sure prongs are facing up
- Print time with above settings will be about 11 Hours
- There is no assembly time
Demoing Tool Use in Weeds/Dirt, Gravel, and Wood Chips |
---|
Common Problems and Solutions
I broke my glass trying to get the piece off the bed so be careful on removal.
Cost savings
Cost of creating this hand cultivator
*Filament needed: 130.8 *At a cost of $23 a kilogram the total cost of the tool is $2.88
Commercial Equivalents
*Equivalents range from $3.74 (cultivator 1) to about $21 (cultivator 2) *They range in materials from composites to most of them being made of metal.
Saving amount
*The savings are anywhere from $.86 to $18.12 *The percentage of the cost is from 77% of the cost of the cheap one to 13.72% of the expensive one
Gallery
References
- ↑ "Cultivating and Tilling, Why , How and When." Cultivating and Tilling, Why , How and When. N.p., n.d. Web. 26 Nov. 2015. Available: http://www.midwestgardentips.com/cultivating.html