Did you mean: fastener
Create the page "Fasteners" on this wiki! See also the search results found.
- It is designed to be even easier to assemble, having around 50 fewer fasteners, requiring less wood, fewer printed parts and fewer cables. Franklin firmware3 KB (444 words) - 00:48, 17 May 2022
- robust, probably overkill, and along with the plywood components and ample fasteners produce a very rigid structure. The printer has proven to transport very11 KB (1,774 words) - 09:42, 14 June 2022
- printed parts (unmodified Wade's extruder, all PLA bushings) All metric fasteners and smooth rods Brass threaded tube, acorn nut w/ 0.35mm orifice, nichrome4 KB (544 words) - 15:35, 9 June 2023
- bottles Structural material (timber, brick, etc) Wire, or resilient cord Fasteners (nails/screws) From Seawater Greenhouses Fig.1 A diagram of a Seawater3 KB (930 words) - 18:45, 22 June 2024
- it on the x-axis carriage. Get a heated build platform. Don't tighten fasteners running through/in printed parts too much - it's plastic that will deform6 KB (960 words) - 15:50, 9 June 2023
- static, four-legged walker that can be constructed from materials and fasteners commonly available from hardware stores coupled by open-source 3D-printed6 KB (918 words) - 22:31, 25 April 2024
- version of a speed brace. The purpose of this tool is to quickly remove fasteners after they have been broken loose using a breaker bar or ratchet. This4 KB (408 words) - 17:20, 18 June 2024
- Much of the exiting glue needs to be removed and replaced with sturdier fasteners such as brackets and screws. The chosen material available in this region26 KB (3,003 words) - 22:53, 18 June 2024
- Technology Institute. However, even these designs require pre-cut wood,fasteners, and precisely-threaded rods. These parts can usually be found in hardware9 KB (716 words) - 17:30, 18 June 2024
- scraps. I found many parts for free, such as the plywood and wooden planks, fasteners and some alligator clips. Those parts listed in italics are materials which27 KB (3,360 words) - 13:39, 14 July 2023
- 2 M2 washer 2 M3×10 mm cap screw (Motor fasteners) 8 M8 nut 10 M8 washer 11 M3×20 mm cap screw (Motor fasteners) 7 M3 nut 6 M3 washer 11 608zz bearing 25 KB (546 words) - 19:09, 29 May 2023
- departure from minimizing cost was made in the selection of stainless steel fasteners and threaded rod. A lightweight carbon fiber rod y-carriage that has the8 KB (834 words) - 10:54, 6 December 2023
- 2 prong star Stretcher – 6 fasteners, a blanket and 2 poles Hammock - 2 fasteners and a blanket Emergency Tent – 4 fasteners and a plastic sheet or tarp4 KB (514 words) - 21:43, 18 June 2024
- bottles Structural material (timber, brick, etc) Wire, or resilient cord Fasteners (nails/screws) Growing unseasonal fruits and vegetables - or providing2 KB (281 words) - 12:50, 23 October 2023
- replicating excluding fasteners, 13% including fasteners (For both Darwin and Mendel) Mendel possible self replication of 57% (excluding fasteners) if bearings33 KB (4,602 words) - 13:24, 14 April 2023
- self-replicating excluding fasteners, 13% including fasteners (For both Darwin and Mendel) Mendel possible self-replication of 57% (excluding fasteners) if bearings21 KB (2,887 words) - 08:55, 5 September 2024
- 5m 2.7m - 3.4m aluminum, cast steel ASTM A216, 40 pipe, stainless steel fasteners IronRidge GMS approx. $0.56/watt, local hardware and materials, snow load7 KB (48 words) - 14:13, 23 October 2023
- tensioner) 1 Small zip-tie (for Y-axis motor) 3 M3×10 mm cap screw (Motor fasteners) 3 M3 nut (pulley) 2 M3×8 mm set screw 2 M2×10 mm screw 2 (used as a tool5 KB (649 words) - 19:09, 29 May 2023
- Cost(USD) Source All 12 Printed Parts @ $40/kg $12.00 Local RepRap All Fasteners $2.00 http://www.mcmaster.com/ M3 nut 90 M3x10 mm screw 12 M3x12mm screw30 KB (2,601 words) - 14:43, 28 February 2024
- reservoir inlet N/A 01 8 Strainer For reservoir inlet N/A 01 9 Structure & Fasteners Structural Frame Dim: L16in.xW16in.x H 34in. Mild Steel 01 10 Covering10 KB (75 words) - 22:42, 18 June 2024
