Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Prusa SL1 Resin Funnel"

From Appropedia
Jump to: navigation, search
(Cost Savings)
Line 36: Line 36:
 
== Cost Savings ==
 
== Cost Savings ==
 
# Cost to print: ~ $0.34 in PLA filament
 
# Cost to print: ~ $0.34 in PLA filament
# [add link to actual]
+
# [https://naczynia.olkusz.pl/pl/p/Lejek-kuchenny-plastikowy-maly-sr.-8-cm/6729 Retail in Polland ~ $0.91 not including shipping]
  
 
== Benefited Communities ==
 
== Benefited Communities ==

Revision as of 00:46, 7 November 2019

Project developed by Erica Umlor

Abstract

The goal of this project is to make a funnel that for pouring used resin back into the bottle. There is a space for a filter to be inserted as well since there are sometimes chunks in used resin. This funnel is modeled after the funnel that came with the Prusa SL1 printer. It will be used in the OSHE lab at Michigan Tech. There is a funnel stand as well so the chance of getting resin on your hands decreases.

Bill Of Materials

Part Price Quantity
Any 3D Filament $15.00 - $20.00 1

Tools Needed

  1. MOST Delta RepRap or other 3-D printer

Technical Specifications and Assembly Instructions

Design
[[File:|center|border|135x180px|alt=|Fig 1: Funnel ]]
Fig 1: Funnel  
[[File:|center|border|135x180px|alt=|Fig 2: Funnel Holder Top ]]
Fig 2: Funnel Holder Top  
[[File:|center|border|135x180px|alt=|Fig 3: Funnel Holder Bottom ]]
Fig 3: Funnel Holder Bottom  
[[File:|center|border|135x180px|alt=|Fig 4: Funnel Holder Poles ]]
Fig 4: Funnel Holder Poles  

Cost Savings

  1. Cost to print: ~ $0.34 in PLA filament
  2. Retail in Polland ~ $0.91 not including shipping

Benefited Communities

Project

[NIH] [Thingiverse]