Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Wire Holder

From Appropedia
Jump to navigation Jump to search
Wire Holder Prototype

Team

Nicholas Lanter Undergrad student, Computer Engineering

Logan Brueck Undergrad student, Mechanical Engineering

Project

Test Lead Holder

An open source wire lead holder that can be easily printed for any lab. Saving both time and money.

A commercial off the shelf wire holder would cost about $15, this holder will cost $1.29 to print. Also it can be printed in just a few hours which would be much faster than if you had to order and ship one.

Prototype

Bill Of Materials

  • 3x #6 sheet metal screws @ $0.372 per screw

Installation and Use

  • Install using #6 sheet metal screws or equivalent and slide wire holder over.

Files

Printable Parts
Outside Material Funnel Cone  
Inside Material Funnel Cone  
Side view Screw with Holder  
Top view Screw with Holder  
Main Drive Motor Pulley  
T5 Drive Belt  
Recyclebot feeding auger