(→Design) |
(→Design) |
||
Line 44: | Line 44: | ||
|title= Insulation Clamp | |title= Insulation Clamp | ||
|lines=2 | |lines=2 | ||
|Image: | |Image:Insulation_bracket_1.jpg|Side View | ||
|Image: | |Image:Insulation_bracket_2.jpg|Front View | ||
}} | }} | ||
Revision as of 14:29, 10 November 2015
Project goals
- Plan upgrades
- Execute Upgrades
- Make BOM and instructions for entire chamber
- Profit
Design
All design files are hosted on http://3dprint.nih.gov The links for each file are listed below.
Costs
You may describe your costs here.
Nozzle Clamp | Insulation Bracket | Coupon Rack | Hood Props | Chamber Drain | |
---|---|---|---|---|---|
Original Price | $5 | $30 | $100 | $60 | $10 |
New Price | <<$1 | $16 for 16 | <<$1 each | $11.30 | <<$1 |
Savings | $5 | $14 | $100 | $48.70 | $10 |
Next steps
Publish detailed instructions.
Conclusions
This salt spray chamber would save approximately $19,000 from our first rough estimates. Our current modifications now save $475 assuming that just 4 sample racks are needed. These modifications can easily be put into most chambers with only small changes needed. This chamber has no loss in quality, and currently complies with all ASTM standards.
Project Members
Cleyton Cavallaro, Eli Gooding, Thomas Korejza, Erik Bain, Mike Holt, Kyle Barie