(Changed price of Hood props) |
No edit summary |
||
Line 90: | Line 90: | ||
Erik Bain, | Erik Bain, | ||
Mike Holt, | Mike Holt, | ||
Kyle | Kyle Barie | ||
<!-- Don't change the next line unless you intend to change the categorization --> | <!-- Don't change the next line unless you intend to change the categorization --> | ||
<!-- Do add additional, appropriate categories. See http://www.appropedia.org/Appropedia:CategoryTree for ideas. --> | <!-- Do add additional, appropriate categories. See http://www.appropedia.org/Appropedia:CategoryTree for ideas. --> | ||
[[Category:Projects]] | [[Category:Projects]] |
Revision as of 06:30, 10 November 2015
Project goals
- Plan upgrades
- Execute Upgrades
- Make BOM and instructions for entire chamber
- Profit
Design
All design files are hosted on http://3dprint.nih.gov The links for each file are listed below.
Costs
You may describe your costs here.
Nozzle Clamp | Insulation Bracket | Coupon Rack | Hood Props | Chamber Drain | |
---|---|---|---|---|---|
Original Price | $5 | $30 | $100 | $60 | $10 |
New Price | <<$1 | $16 for 16 | <<$1 each | $11.30 | <<$1 |
Savings | $5 | $14 | $100 | $46.40 | $10 |
Next steps
Publish detailed instructions.
Conclusions
This salt spray chamber would save approximately $19,000 from our first rough estimates. Our current modifications now save $475 assuming that just 4 sample racks are needed. These modifications can easily be put into most chambers with only small changes needed. This chamber has no loss in quality, and currently complies with all ASTM standards.
Project Members
Cleyton Cavallaro, Eli Gooding, Thomas Korejza, Erik Bain, Mike Holt, Kyle Barie