- Changing the acrylic shell
- Adding a dual extruder
- changing the color scheme of the printer
- change the color of the wires
- change color of arduino
- change led lights
- use different color belts
- use a colored lubricant
- print the hot end in red
- print the non hot stuff in blue
- use red zip ties on hot end parts
- use blue zip ties on non-hot parts
- red zip ties on heated bed
- blue zip ties on normal bed
- leds change color when proximity is changed
- led light the printer when it's on, printing, idling
- change the color of the screen
- change the color of the bottom tape
- make the extruder white so if burnt you can see
- use all black so it represents my soul
- each wire is a different color so you can follow
- each wire is the same color so you can follow none of them
- colored holes on acrylic matching colored wires
- this end up arrow
- red colored letters that say "CAN BE MADE INTO A DUAL EXTRUDER"
Kentresting (talk) 06:18, 24 April 2017 (PDT) Tomsmusts (talk) 07:41, 24 April 2017 (PDT)
- Multiple types of mixed filament coming out of one extruder head.
- Having multiple extruder heads for multiple types of material.
- One color filament that you can mix ink with.
- Printer that paints it.
GabrielFugman (talk) 07:15, 20 April 2018 (PDT) Aaron.cranford (talk) 07:16, 20 April 2018 (PDT)