▼This page is part of the 2017 Principia course ENGR242: 3-D Printing Technology

It's open edit now, so feel free to improve it.

1. Changing the acrylic shell
2. Adding a dual extruder
3. changing the color scheme of the printer
4. change the color of the wires
5. change color of arduino
6. change led lights
7. use different color belts
8. use a colored lubricant
9. print the hot end in red
10. print the non hot stuff in blue
11. use red zip ties on hot end parts
12. use blue zip ties on non-hot parts
13. red zip ties on heated bed
14. blue zip ties on normal bed
15. leds change color when proximity is changed
16. led light the printer when it's on, printing, idling
17. change the color of the screen
18. change the color of the bottom tape
19. make the extruder white so if burnt you can see
20. use all black so it represents my soul
21. each wire is a different color so you can follow
22. each wire is the same color so you can follow none of them
23. colored holes on acrylic matching colored wires
24. this end up arrow
25. red colored letters that say "CAN BE MADE INTO A DUAL EXTRUDER"

Kentresting (talk) 06:18, 24 April 2017 (PDT) Tomsmusts (talk) 07:41, 24 April 2017 (PDT)

1. Multiple types of mixed filament coming out of one extruder head.
2. Having multiple extruder heads for multiple types of material.
3. One color filament that you can mix ink with.
4. Printer that paints it.

GabrielFugman (talk) 07:15, 20 April 2018 (PDT) Aaron.cranford (talk) 07:16, 20 April 2018 (PDT)