Search results

Create the page "Prstn" on this wiki! See also the search results found.

• Appropriate Technology Sourcebook/Independent Energy
  Alternative Sources of Energy 60.March/April (1983). Print. Currently all information is available online from either of the following two sites: http://www
  790 bytes (64 words) - 14:06, 10 December 2023
• MOST RepRap print server (section Raspberry Pi RepRap Print Server)
  into the controller. A more attractive approach is employing a web enabled print server such as Repetier Server running on the Raspberry Pi, an inexpensive
  11 KB (1,763 words) - 18:04, 7 March 2023
• MOST News
  Journalists Circular Economy Under-explored in 3D Printing, Say Researchers 3D Print 70.5k Thanks for Sharing: Reusable Open Source Hardware Respirators- Machine
  38 KB (2,142 words) - 11:48, 28 August 2023
• Delta Build Overview:MOST
  III Nozzle diameter: 0.5mm (can be changed) Print volume: 250mm diameter, 240mm high cylinder Melzi print controller w/ integrated SD card reader Most
  11 KB (1,774 words) - 09:42, 14 June 2022
• RepRap printing protocol: MOST (section The print isn't sticking)
  directly related to print time. The larger the layer height, the shorter the print time. The smaller the layer height, the better the print as it is a thinner
  9 KB (1,428 words) - 19:00, 2 March 2022
• RepRap
  using a common milk crate for a frame Individual Mendel print files Block/combined Mendel print files One-sheet mendel file Mendel parts on google sketchup
  4 KB (320 words) - 14:22, 18 October 2022
• 777 Big Money Project
  table below (see example). Print component and bring to class (online students - post a link to a short Youtube video) 30% Print quality 20% Documentation
  112 KB (200 words) - 19:01, 16 April 2024
• 3D printing (redirect from 3-D print)
  to get flawless print ready STL file Inition: print and send yourself manufactured items from an .skp or .STL file Print to 3D: print and send yourself
  6 KB (887 words) - 19:09, 8 June 2023
• Athena Build Overview
  75mm Nozzle diameter: 0.5mm (can be changed) Print volume: 250mm diameter, 240mm high cylinder A variety of print controllers can be used; this version uses
  5 KB (746 words) - 13:53, 23 October 2023
• MOST RepRap Build (section Print Bed)
  and Layer Height. 11/9/2011 - Mounted and testing heated print bed. Using glass as the print surface on top of the PCB with the thermistor taped to the
  7 KB (872 words) - 15:38, 9 June 2023
• RepRap printing lessons learned: MOST
  warping. Leave it at T for the full print for best results. If printing parts having small z-axis cross sectional area, print several at a time so that each
  6 KB (960 words) - 15:50, 9 June 2023
• MOST RepRap Primer
  wrong, the printer won't produce a print matching the dimensions of the model and probably won't even produce a usable print (keep in mind that the slicer figures
  21 KB (3,442 words) - 10:52, 6 December 2023
• Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
  results are observed with ABS, which demands higher temperatures for the print bed and extruder. Overall, the results indicate that distributed manufacturing
  9 KB (595 words) - 16:02, 23 February 2024
• Open-source metal 3-D printer (section Printed Parts)
  GMAW-based metal 3-D printing Print these STL files on any flavor of RepRap. The red parts in the image on the right are the printed parts. The SCAD if you need
  30 KB (2,601 words) - 14:43, 28 February 2024
• 3D Printing Failure Database (section 3D print your part)
  odt Fill the tables Attach the STL file of the failed print Attach the G-Code file of the failed print Email all the necessary files (preferably with the
  5 KB (382 words) - 13:48, 22 May 2023
• Development of a Resilient 3-D Printer for Humanitarian Crisis Response
  manufacturing in a humanitarian context. What could you print with it? This printer was primarily tested on 3D printed medical equipment, however there are many applications
  6 KB (541 words) - 15:53, 23 February 2024
• AthenaII
  Nozzle diameter: 0.4mm (can be changed) Print volume: 220mm diameter, 210mm high semi-cylindrical shape A variety of print controllers can be used; this version
  3 KB (444 words) - 00:48, 17 May 2022
• Appropriate Technology Sourcebook/Thatching
  Bibliography Hall, Nicholas. Thatching. New York: Practical Action, 1988. Print. Copyright © Intermediate Technology Publications 1988 AT Sourcebook
  446 bytes (23 words) - 14:04, 10 December 2023
• Appropriate Technology Sourcebook/Building with Earth
  With Earth: A Handbook. London: Intermediate Technology Publications, 1986. Print. Copyright Information © John Norton, 1986, Development Workshop AT Sourcebook
  485 bytes (29 words) - 14:58, 9 December 2023
• Appropriate Technology Sourcebook/Rural Building: Construction
  available here. Bibliography Winden, J. Van. Rural Building. Agritore, 1986. Print. Copyright Information © Stichting Kongregatie F.I.C., Maastricht, 1986 AT
  450 bytes (26 words) - 14:05, 10 December 2023