Line 14: | Line 14: | ||
==Current Projects== | ==Current Projects== | ||
===3-D Printer=== | ===3-D Printer=== | ||
I Gained experience of Rapid Prototyping through a Open Scource 3D printing course at Michigan Technological University under the guidance of [http://www.appropedia.org/User:J.M.Pearce Dr. Joshua Pierce]. Project Completed for this class are listed below with links to the individual project embedded. | |||
===Senior Design=== | ===Senior Design=== | ||
Currently Senior Capstone is to create a prototype with 4 piezoelectric stacks to vibrate an instruments between 100 and 10000 Hz. | Currently Senior Capstone is to create a prototype with 4 piezoelectric stacks to vibrate an instruments between 100 and 10000 Hz. | ||
[[category:777-2014 People]] | [[category:777-2014 People]] | ||
==Projects== | ==Projects== |
Revision as of 04:33, 15 December 2014
Template:Userboxtop Template:User OSH
Template:User 3D printing Template:Userboxbottom
Bio
Currently studying at Michigan Technological University Mechanical and Biomedical Engineering. I have an interest in Research Development, Product Development and Rapid Prototyping.
Current Projects
3-D Printer
I Gained experience of Rapid Prototyping through a Open Scource 3D printing course at Michigan Technological University under the guidance of Dr. Joshua Pierce. Project Completed for this class are listed below with links to the individual project embedded.
Senior Design
Currently Senior Capstone is to create a prototype with 4 piezoelectric stacks to vibrate an instruments between 100 and 10000 Hz.