m (→Bas) |
No edit summary |
||
Line 79: | Line 79: | ||
== Ravi == | == Ravi == | ||
* order last parts!! | * <s>order last parts!!</s> | ||
* fill in method [[Oscilloscope protocol: MOST]] | * fill in method [[Oscilloscope protocol: MOST]] | ||
* construct welder | * construct welder |
Revision as of 06:36, 8 June 2013
- Please complete the task and either 1) hyperlink to the page in our Appropedia space or 2) email Dr. Pearce and
cross offthe result - Update task list every Wednesday by midnight.
Allie
Bas
- MOST RepRap
- nephalometer
- lit review
- outline
- print weak elec. material
hard drive order recommendation- learn mech test from Brennan
- recyclebot operation
- MOST RecycleBot Spooler
- MOST Encryption method
- pva recycling
- dual filament extrusion page
Ben
Brennan
Finish solar racking paper- Dial in laser speed and current
- Weld HXs
- Pull tensile samples
- teach Bas mech tests
Chenlong
- finish PV class write up only on the atmospheric conditions + albedo
- setup PL system (today!) - black spray paint box
- new glass etch - print Dr. Frost - verify - make sure it works on our own for PLA on normal glass
- The best recipe we have is: - 1. clean slide with ethanol (200 proof is what we used) - 2. soak in neat [3-92-aminoethylamino)propyl]trimethoxysilane for 15 min. - 3. rinse with toluene - 4. let dry under ambient conditions over night
- ALD lit search Atomic layer deposition literature review
- finish Open-source photoluminescence system
- spectrometer Open source spectrometer:MOST
- MBE_protocol:MOST
- finish InGaN lit review InGaN material characterization literature review
- reprap chemistry
Halley
- finish redesign of tent peg - email JMP
- contact First Solar about module return - strip wires give to Ravi
- finish openscad of framed module xwire
- print spikes, print xwire clips
- install at KRC in line of camera, time setup and document KRC data:MOST
- survey of roof racks
- survey of variable angle ground mounts
- lit review on 20 year outdoor polymer testing-- ABS, HDPE, PLA, Polycarbonate -- current printable materials
Joseph
- finish PVT paper - email to JMP with new figs
- make cost comparison chart for IV/solar simulator
- help Mosaic with new depositions
- MBE_protocol:MOST
- finish InGaN lit review - focus on devices --InGaN photovoltaics literature review
- write up Hall Effect protocol:MOST, post spreadsheet Dr. Moran
- open source charge controller
Jephias
- finish PV class write up only on the atmospheric conditions with Chenlong
- help Chenlong set up PL
- Plasmonics for solar cell
- Spin Coater protocol
Ravi
order last parts!!- fill in method Oscilloscope protocol: MOST
- construct welder
- welding simulation paper outline asap
- forestry data logger
- Forest service PV system design-- appropedia summary page so others can copy - BOM, wiring, how to access data etc.
- Photovoltaic charging of ultracapacitors literature review - complete lit review
- Photovoltaic charging of ultracapacitors - project page
- Ultracapacitors: MOST - methods page, include spec sheets, safety, etc. for using ours.
Publications
- paper 1 - Photovoltaic charging of ultracapacitors
- paper 2 - Open source power electronics for a solar powered internet
- paper 3
Dr. Pearce
(W= waiting on reply) (add to bottom of list before waiting/triggers)
Deadlines
- June 10 IEEE PVSC
- June 24 EE lecture
- July 28 printer camp
- July 31 final draft book
grants
- http://www.trb.org/IDEAProgram/IDEAProgram.aspx
- http://www.mtu.edu/research/administration/vpr-office/internal-awards/c2e2/
- https://www.engineeringforchange.org/news/2013/01/11/ten_top_fundraising_platforms.html
To do
- rewrite PL/ellip
- pv annuity - w
- fuel cell - W
- trigger Queens PV
- Salt 2
- PV mount
Pending Projects
open design
- Build MakerScanner http://wiki.makerbot.com/makerscanner-building - fix light holder
- Set up Duel Boot on Netbook
- Learn Open Scad http://www.openscad.org/
- elaborate on Literature Search - feed Development_and_feasibility_of_applications_for_the_RepRap_3-D_printer
- purchase foam board and make measurement lines
- put together protocol for makerscanner to open source cad package --
- work on openscad designs
spectral pv
- Literature Search (Read Literature from Rob's work)
- Effects of spectral albedo on photovoltaic devices
- write SBDART protocol: MOST also see if we need to use this [1]
- translate code, verify
- run simulations
Open source hardware projects
- for publishing http://www.tandfonline.com/action/aboutThisJournal?show=abstractingIndexing&journalCode=list20
- finish filter wheel (work with Rodrigo)
- environmental chamber
- pin/nip flip
- electrode
- TiO2 test cell
- dremel fuge2
- dremel spincoater