J.M.Pearce (talk | contribs) m (moved HS RepRap frame to MOST RepRap frame) |
J.M.Pearce (talk | contribs) mNo edit summary |
||
Line 2: | Line 2: | ||
[[category:MOST methods]] | [[category:MOST methods]] | ||
=Frame= | =Frame= | ||
{{MOST RepRap Ed}} | |||
[[Image:MOST_HSPrusa_frame_0.jpg|center]] | [[Image:MOST_HSPrusa_frame_0.jpg|center]] | ||
==Printed Parts== | ==Printed Parts== |
Revision as of 00:44, 7 June 2013
Frame
Printed Parts
Description | Count | Image |
---|---|---|
Footed bottom vertex | 4 | |
Top vertex | 2 | |
Rod clamp (some shown white in the pictures below, but all should be silver) | 6 |
Vitamins
Description | Count |
---|---|
440 mm M8 threaded rod (Top horizontals and bottom of z-axis) | 3 |
370 mm M8 threaded rod (Triangle sides) | 6 |
290 mm M8 threaded rod (Lower horizontals) | 4 |
M8 nut | 60 |
M8 washer | 66 |
M3×12 mm cap screw (Melzi mount) | 4 |
M3 nut | 4 |
M3 washer | 4 |
Assembly - Summary
- Assemble triangles
- Assemble horizontal rods
- Put them together
Assembly - Step-by-Step
- Put a rod clamp on one rod with a washer and a nut on both sides. Don't screw it tight; you'll need to adjust the position later. Put a nut and a washer on each side of each rod.
- Put the trangle together. Make sure the clamp goes between the footed vertices and the feet are both on one edge of the triangle.
- Repeat for the other triangle.
- Assemble the two top base rods, which will go through the top holes of the footed vertices. The image shows the pieces for one rod, and another rod assembled.
- Assemble the top rods.
- Assemble the bottom base rods.
- Attach the horizontal rods to between the triangles. The bottom frame rod with the nuts and washers on it is the front of the machine. The extruder will be on the left of the top rods, so leave more space there than on the right.
- Attach the wire holders to the frame.