Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Obvious 3D printer technology based on 38. Use strong oxidisers

From Appropedia
Jump to: navigation, search
MOST Delta filament as guide.JPG This page was part of an MTU course MY4777/MY5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Noedpatent.jpg
Notice: Broad and/or obvious patent claims for 3-D printing technology may hamper the open-source 3-D printing community's ability to innovate. Previous work on an algorithm protected 3-D printing materials. This page is part of a MTU Open Source 3-D Printing class project to investigate 3-D printing concepts using TRIZ and is presented here as a defensive publication of prior art to help identify obvious 'inventions' for 3-D printing.

Examiners: The ideas on this page dated Dec 3, 2015 and Nov 29, 2016 were developed by university students with less than a semester of formal 3-D printing experience (or by an instructor in class) and thus should be considered unpatentable because of obviousness to any person skilled in the art of additive manufacturing.
Appropedians: This page is open edit. Please fee free to add ideas and sign them below with ~~~~ or to use any of the ideas to built better open-source 3-D printers.


Utilizing Strong Oxidisers (MY4777/MY5777 2016)[edit]

JLaureto (talk) 07:29, 1 December 2016 (PST) Krcipriano (talk) 07:30, 1 December 2016 (PST)

  1. Controlled atmosphere to promote deposited layer growth JLaureto (talk) 07:37, 1 December 2016 (PST)
  2. Increased temperature increases oxidation rate. Assuming the environment was oxygen rich to begin with JLaureto (talk) 07:38, 1 December 2016 (PST)
  3. Oxygen is readily available. Any material, mostly metallic some polymer, could by applied to the printing system.JLaureto (talk) 07:42, 1 December 2016 (PST)
  4. Potentially eliminate bolts and "oxidize" parts together?JLaureto (talk) 07:42, 1 December 2016 (PST)
  5. Similar to above reducing fixturing hardware would reduce overall costJLaureto (talk) 07:42, 1 December 2016 (PST)
  6. Something??
  7. Promote oxidation of build plate to a uniform surfaceJLaureto (talk) 07:46, 1 December 2016 (PST)
  8. Temporarily fixture components together and introduce driving for for oxidation to bond everything together. JLaureto (talk) 07:46, 1 December 2016 (PST)

  1. use oxidizer to clean hot end Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  2. auto clean hotend with oxidizer agent Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  3. use oxidizing agent to clean bed surface Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  4. print untop of oxidizing agent to allow for print removal from surface Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  5. rust print Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  6. oxidize print afterwards to change color Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  7. oxidize atmosphere around print to prevent contaminants Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  8. use an oxidizing agent in print to enable 4D Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  9. partially print oxidizing agent into print to make folding, long time delay 4D print Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  10. use oxidizing agent inside filament to start degradation to speed recycling or biodegradationJoshua Pearce (talk) 07:08, 4 December 2018 (PST)
  11. use oxidizing agent in nutritional 3D printed capsule for time delay of nutrients Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  12. use oxidizing agent in poison 3D printed capsule for time delay of poison Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  13. use oxidizing agent coupled to metal as inclusion to change mech properties over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  14. use oxidizing agent coupled to metal as inclusion to change shape over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  15. use oxidizing agent coupled to metal as inclusion to change light absorption over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  16. use oxidizing agent coupled to metal as inclusion to change magnetic properties over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  17. use oxidizing agent coupled to metal as inclusion to make data erase over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  18. physical snapchat Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  19. use oxidizing agent on surface printed in thin film of metal to have zero effort bed removal of print Joshua Pearce (talk) 07:11, 4 December 2018 (PST)
  20. use oxidizing agent on surface of print to change color of print Joshua Pearce (talk) 07:11, 4 December 2018 (PST)
  21. use oxidizing agent on surface of part to help as digging tool Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  22. use oxidizing agent on surface of part to help as cutting tool Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  23. use oxidizing agent on surface of part to help as art tool - drawing object Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  24. 2 filament printing one with oxidizing agent to be used a support Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  25. 3 filament printing one with oxidizing agent to be used a support and the other to use to increase flexibility Joshua Pearce (talk) 07:13, 4 December 2018 (PST)