{"id":69816,"key":"Obvious_3D_printer_technology_based_on_38._Use_strong_oxidisers","title":"Obvious 3D printer technology based on 38. Use strong oxidisers","latest":{"id":1209556,"timestamp":"2025-11-28T02:38:42Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}{{TRIZ-3D}}\n\n== Utilizing Strong Oxidisers (MY4777/MY5777 2016) ==\n\n[[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:29, 1 December 2016 (PST)\n[[User:Krcipriano|Krcipriano]] ([[User talk:Krcipriano|talk]]) 07:30, 1 December 2016 (PST)\n\n# '''Controlled atmosphere to promote deposited layer growth''' [[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:37, 1 December 2016 (PST)\n# Increased temperature increases oxidation rate. Assuming the environment was oxygen rich to begin with [[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:38, 1 December 2016 (PST)\n# Oxygen is readily available. Any material, mostly metallic some polymer, could by applied to the printing system.[[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:42, 1 December 2016 (PST)\n# Potentially eliminate bolts and \"oxidize\" parts together?[[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:42, 1 December 2016 (PST)\n# Similar to above reducing fixturing hardware would reduce overall cost[[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:42, 1 December 2016 (PST)\n# Something??\n# Promote oxidation of build plate to a uniform surface[[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:46, 1 December 2016 (PST)\n# Temporarily fixture components together and introduce driving for for oxidation to bond everything together. [[User:JLaureto|JLaureto]] ([[User talk:JLaureto|talk]]) 07:46, 1 December 2016 (PST)\n\n----\n\n# use oxidizer to clean hot end [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# '''auto clean hotend with oxidizer agent''' [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use oxidizing agent to clean bed surface [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# print untop of oxidizing agent to allow for print removal from surface [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# rust print [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# oxidize print afterwards to change color [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# oxidize atmosphere around print to prevent contaminants [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use an oxidizing agent in print to enable 4D [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# '''partially print oxidizing agent into print to make folding, long time delay 4D print''' [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use oxidizing agent inside filament to start degradation to speed recycling or biodegradation[[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use oxidizing agent in nutritional 3D printed capsule for time delay of nutrients [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use oxidizing agent in poison 3D printed capsule for time delay of poison [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:08, 4 December 2018 (PST)\n# use oxidizing agent coupled to metal as inclusion to change mech properties over time [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# use oxidizing agent coupled to metal as inclusion to change shape over time [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# use oxidizing agent coupled to metal as inclusion to change light absorption over time [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# use oxidizing agent coupled to metal as inclusion to change magnetic properties over time [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# use oxidizing agent coupled to metal as inclusion to make data erase over time [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# physical snapchat [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:10, 4 December 2018 (PST)\n# use oxidizing agent on surface printed in thin film of metal to have zero effort bed removal of print [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:11, 4 December 2018 (PST)\n# use oxidizing agent on surface of print to change color of print [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:11, 4 December 2018 (PST)\n# use oxidizing agent on surface of part to help as digging tool [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:12, 4 December 2018 (PST)\n# use oxidizing agent on surface of part to help as cutting tool [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:12, 4 December 2018 (PST)\n# use oxidizing agent on surface of part to help as art tool - drawing object [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:12, 4 December 2018 (PST)\n# 2 filament printing one with oxidizing agent to be used a support [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:12, 4 December 2018 (PST)\n# 3 filament printing one with oxidizing agent to be used a support and the other to use to increase flexibility [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:13, 4 December 2018 (PST)\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}\n\n[[Category:4777 TRIZ 3D printers]]"}