OSAT Wind Turbine

From Appropedia
This page is incomplete - it appears to be a project or similar initiative, not completed by its creator.
Has the page's creator been contacted? No
Marked since 2020-10-05.


About this device
Blade.jpg
Keywords 3D printing, wind energy, turbine, blade
Uses energy, development, industry
Authors Lee Southerton
Status prototype
Made? Yes
Replicated? No
Designed in United States
Affiliations MOST
Materials Plastic
SDGs SDG07 Affordable and clean energy
SDG11 Sustainable cities and communities
SDG12 Responsible consumption and production
License data
Hardware CC BY-SA 4.0
Instructions data
Manufacturing files https://www.thingiverse.com/thing:577603
Translation data

OSAT Wind Turbine Blade[edit | edit source]

Project developed by Lee Southerton - Lssouthe

Abstract[edit | edit source]

  1. A Wind turbine bade
  2. Picture of completed print using
    Blade.jpg

Bill of Materials[edit | edit source]

  1. PLA Plastic
  2. Files can be found on at [[1]]


Tools needed[edit | edit source]

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Lighter

Skills and knowledge needed[edit | edit source]

  • Knowledge how to operate a 3d printer
  • Knowledge of how to operate freecad if changes to blade needs to be made

Common Problems and Solutions[edit | edit source]

  • Rough edges can be smoothed out with lighter.