- Please complete the task and either 1) hyperlink to the page in our appropedia space or 2) email Dr. Pearce and
cross offthe result - Update task list every Wednesday by midnight.
Alicia
- Build MakerScanner http://wiki.makerbot.com/makerscanner-building - fix light holder
- Set up Duel Boot on Netbook
- Learn Open Scad http://www.openscad.org/
- elaborate on Literature Search - feed Development_and_feasibility_of_applications_for_the_RepRap_3-D_printer
- purchase foam board and make measurement lines
Install and Learn zotero
Allie
- start project/lit page Recyclebot - Life cycle analysis of polymer recycling literature review and Waste plastic extruder: literature review
- Thermocouple measurements protocol: MOST
- work on controls
- collect plastic
Ankit
- Literature review on mobility of electron and holes in InGaN - InGaN_Solar_Cells_Literature_Review - 10 per day. fill in as you read
- Efficient solar tracking system and follower and its integration with GPS (fully open source project) to be done with Ravi
Brad
- Fill in MBE_protocol:MOST
- pic and para
- computers, internet for lab
Brennan
- Build RepRap - MOST RepRap Build
- Literature review - RepRap Mechanical Testing Literature Review add standards
- write Tensile test protocol: MOST
Tensile Test TrainingMake wood sheets- Put build documentation on project page - Mechanical testing of polymer components made with the RepRap 3-D printer
Daniel
- check out of the MOST library
- Solar powered Internet literature review
Meredith
- set up lit search page and fill in - Life cycle analysis of polymer recycling literature review
- work on project page Life cycle analysis of distributed polymer recycling
- refer to Waste plastic extruder: literature review
- check Tensile test protocol: MOST
Mike
- Literature Search (Read Literature from Rob's work)
Scilab - add links to tutorials- Effects of spectral albedo on photovoltaic devices
- write SBDART protocol: MOST also see if we need to use this [1]
- translate code, verify
Sai Ravi
- generalizable Design guide for small-scale solar photovoltaic applications
- add in software for Laser welding protocol: MOST
- send me parts list for laser welder
Thad
- create a safety protocol - contact company - build Laser welding protocol - MOST, cabinet
Send order list for mech/elec parts- Open source laser system for polymeric welding
Dr. Pearce
(W= waiting on reply)
Deadlines
McArthur Research Internship due date of September 30, 2011.Sustainable Vision program - Proposals due October 14, 2011 http://nciia.org/grants- Course and Program grants- Proposals due December 2, 2011
- NSF Science, Engineering and Education for Sustainability Fellows. [2] Dec 5
- NSF Energy for Sustainability due 2/17/12. : http://www.nsf.gov/funding/pgm_summ.jsp?pims_id=501026.
- solar farm june 9 [3]
To do
kirby paper
Ex-situ processing
- Ha Sensors -W w/Rob and Ger
- fc paper-w
- academic responsibility, most important studies