J.M.Pearce (talk | contribs) m (→Dr. Pearce) |
|||
Line 33: | Line 33: | ||
== Brennan == | == Brennan == | ||
* Install new motors | |||
* Dial in laser speed and current | * Dial in laser speed and current | ||
* Fix dimensional accuracy problems | * Fix dimensional accuracy problems | ||
* <s>modulate laser power and time for line and spot welds</s> | * <s>modulate laser power and time for line and spot welds</s> | ||
*<s>Motor driver chips</s> - <s>solder piggyback or use higher current chips</s> <s>Still need more current?</s> <s>Triple stack?</s> | *<s>Motor driver chips</s> - <s>solder piggyback or use higher current chips</s> <s>Still need more current?</s> <s>Triple stack?</s> | ||
* Confirm tensile test parameters with printed samples | * Confirm tensile test parameters with printed samples | ||
* <s>Work with Megan to</s> print | * <s>Work with Megan to</s> Jerry print ABS tensile bars | ||
* Pull tensile samples | * Pull tensile samples | ||
Revision as of 00:36, 25 February 2013
- Please complete the task and either 1) hyperlink to the page in our Appropedia space or 2) email Dr. Pearce and
cross offthe result - Update task list every Wednesday by midnight.
Allie
- get spooler setup, MOST RecycleBot Spooler - list BOM, instructions
- graph your data box plots
- paper draft,
- try PLA pellet extrusion
- process a bunch of HDPE, measure time it takes to do things, talk to Megan
- and make a bunch of filament
- work on printing
- start project/lit page -- start filling this in as you go Recyclebot - take pictures etc.
- make table in project page with polymers and melting point ranges
- Finish Life cycle analysis of polymer recycling literature review and Waste plastic extruder: literature review
- Thermocouple measurements protocol: MOST
Ben
- start Effects of electric fields on amorphous silicon literature review -- use the following to guide you: [1]
instructions for combining objects to print- print probes
print ultracap holders
Brad
- Help build system
- Fill in MBE_protocol:MOST
Brennan
- Install new motors
- Dial in laser speed and current
- Fix dimensional accuracy problems
modulate laser power and time for line and spot weldsMotor driver chips-solder piggyback or use higher current chipsStill need more current?Triple stack?- Confirm tensile test parameters with printed samples
Work with Megan toJerry print ABS tensile bars- Pull tensile samples
Chenlong
new glass etch - print Dr. Frost- ALD lit search Atomic layer deposition literature review
- finish Open-source photoluminescence system
- spectrometer Open source spectrometer:MOST
- MBE_protocol:MOST
- finish InGaN lit review InGaN material characterization literature review
- reprap chemistry
John
- day 1 stuff
Joseph
- QE protocol:MOST
- help brennan
- MBE_protocol:MOST
- finish InGaN lit review - focus on devices --InGaN photovoltaics literature review
- write up Hall Effect protocol:MOST, post spreadsheet Dr. Moran
- open source charge controller
- set up biweekly meeting slc
Jephias
- finish metamaterials, perfect absorber lit review
- review article
- Plasmonics for solar cell
Mac
- Figure out why the spectrum intensity does not match the paper
- generate spectrum for different locations/seasons
- Look at weather data for cloud data. (Idea being that some locations might have more cloudy days effecting the yearly spectrum)
- Generate spectrum for various cloud formations
- Find better water albedo data
- Figure out how to format data for use in code
- refine material picks
- Go over theory, match calculations in code to variables and equations
- experimental design
- Research Outline/Summary
- calibrate reptile light
Ravi
- fix pv+internet paper
- o
rder list for welder - put lab in order elec
- welding simulation
- forestry data logger
- Forrest service PV system design-- appropedia summary page so others can copy - BOM, wiring, how to access data etc.
- Photovoltaic charging of ultracapacitors literature review - complete lit review
- Photovoltaic charging of ultracapacitors - project page
- Ultracapacitors: MOST - methods page, include spec sheets, safety, etc. for using ours.
Publications
- paper 1 - Photovoltaic charging of ultracapacitors
- paper 2 - Open source power electronics for a solar powered internet
- paper 3
Dr. Pearce
(W= waiting on reply) (add to bottom of list before waiting/triggers)
Deadlines
- feb 4 http://www.ieee-pvsc.org/PVSC39/pages/technical_program-call_for_papers.php
- feb 7 uofT visit
- feb 19 wfl nsf http://www.nsf.gov/funding/pgm_summ.jsp?pims_id=501027
- march 1 example chap
- July 31 final draft
grants
- http://www.trb.org/IDEAProgram/IDEAProgram.aspx
- http://www.mtu.edu/research/administration/vpr-office/internal-awards/c2e2/
- https://www.engineeringforchange.org/news/2013/01/11/ten_top_fundraising_platforms.html
To do
- rewrite PL/ellip
- PVT dispatch
- outline open science
- finish/submit lca distribute recycling - w
- pv off grid - w
- pv annuity - w
- exergy -w
- fuel cell - W
- trigger Queens PV
- Salt 2 - w
- nano redo?
- Enterprise - W
Pending Projects
open design
- Build MakerScanner http://wiki.makerbot.com/makerscanner-building - fix light holder
- Set up Duel Boot on Netbook
- Learn Open Scad http://www.openscad.org/
- elaborate on Literature Search - feed Development_and_feasibility_of_applications_for_the_RepRap_3-D_printer
- purchase foam board and make measurement lines
- put together protocol for makerscanner to open source cad package --
- work on openscad designs
spectral pv
- Literature Search (Read Literature from Rob's work)
- Effects of spectral albedo on photovoltaic devices
- write SBDART protocol: MOST also see if we need to use this [2]
- translate code, verify
- run simulations
Open source hardware projects
- for publishing http://www.tandfonline.com/action/aboutThisJournal?show=abstractingIndexing&journalCode=list20
- finish filter wheel (work with Rodrigo)
- environmental chamber
- pin/nip flip
- electrode
- TiO2 test cell
- dremel fuge2
- dremel spincoater