Clamps are an essential tool in building just about anything from scratch. This OSAT is intended to take the place of woodworking clamps. The source code is parametric, the size of the clamp is limited only by the size of the 3D printer.

Bill of Materials[edit | edit source]

  1. Only filament is required to build this OSAT
  2. Here are the STL files
    1. [1]
    2. [2]
    3. [3]

Tools needed[edit | edit source]

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. OpenSCAD Parametric modeling software http://www.openscad.org
  3. Download the ISO Metric Thread SCAD file from http://www.thingiverse.com/thing:311031. Inlcude this in the same folder as the main SCAD File
  4. Download this handscrew SCAD model.[ https://www.appropedia.org/File:Woodworking_Clamp.scad]

References[edit | edit source]

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref></ref> and {{References}}tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example:[1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://web.archive.org/web/20021201231338/http://www.eren.doe.gov:80/erec/factsheets/landscape.html
Cookies help us deliver our services. By using our services, you agree to our use of cookies.