B. Ugwoke, S.P. Corgnati, P. Leone, J.M. Pearce, Adapting the European typology approach for building stock energy assessment (TABULA) concept for the
11 KB (740 words) - 19:11, 16 April 2024
Page 1 - Installation (not to scale) This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are
2 KB (180 words) - 14:05, 10 December 2023
The Athena 3D printer is a RepRap derived from the Most Delta Printer with the additional design goals: Even simpler assembly Perfect match for Franklin
5 KB (746 words) - 13:53, 23 October 2023
The Global Health Medical Device Compendium is an inventory of medical devices designed for use and/or implemented within resource-limited settings. The
8 KB (1,174 words) - 18:31, 29 January 2024
RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament A RecycleBot is a waste plastic extruder that
44 KB (3,723 words) - 14:31, 28 February 2024
Technical progress in the open-source self replicating rapid prototyper (RepRap) community has enabled a distributed form of additive manufacturing to
30 KB (2,601 words) - 14:43, 28 February 2024
Rapid manufacturing using 3-D printing is a potential solution to some of the most pressing issues for humanitarian logistics. In this paper, findings
6 KB (541 words) - 15:53, 23 February 2024
The Hexayurt is a refugee shelter system based on work done at the Rocky Mountain Institute. It uses an approach based on "autonomous building" to provide
9 KB (1,012 words) - 20:57, 9 December 2023
The purpose of this project is to determine mechanical properties of polymer components printed with the open source RepRap Mendel 3-D printer. Standard
4 KB (489 words) - 15:55, 23 February 2024
Manufacturing in areas of the developing world that lack electricity severely restricts the technical sophistication of what is produced. More than a billion
13 KB (990 words) - 12:06, 28 February 2024
This project is developing, designing and testing of customizable open source hardware applications for the RepRap 3D printer. The designs will be categorized
3 KB (381 words) - 15:30, 23 February 2024
Our First Successful Giant Oatmeal Cookie Test The Willow basket parabolic solar cooker was created by Elizabeth Titus, Elle Parks, Simon Walter-Hansen
25 KB (3,454 words) - 16:25, 28 February 2024
This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory
22 KB (2,291 words) - 12:01, 28 February 2024
Solar charged lawnmower To Catch the Sun is the first book created from this much exclusive Appropedia content on photovoltaics. It is was successfully
22 KB (3,731 words) - 14:25, 28 February 2024
The objective of this project is to create a solar cooker out of local invasive species and waste materials. We want to create a device that can pasteurize
16 KB (2,677 words) - 14:47, 28 February 2024
Bob and Cody have modified the off-grid photovoltaic system at the Arcata Educational Farm. The system previously in place consisted of the following components:
14 KB (1,916 words) - 15:58, 29 January 2024
Image of school in La Yuca The following page will cover a variety of topics concerned with providing renewable energy to the La Yuca schoolroom in Santo
21 KB (1,974 words) - 11:51, 28 February 2024
The following page will cover a variety of topics concerned with providing renewable energy to the Ghetto2Garden site in Dominican Republic. The background
20 KB (1,951 words) - 19:04, 29 January 2024
The new and improved Marsh. For our final project we rebuilt a greywater system at the CSA, Arcata Educational Farm. Greywater consists of all used water
13 KB (2,300 words) - 16:39, 29 January 2024
CLASS PROJECTS FOR HSU STUDENTS ENROLLED IN APPROPRIATE TECHNOLOGY-ENGINEERING 305 SPRING SEMESTER 2020. IN ADDITION, STUDENT INTERNS ENROLLED PERMACULTURE
24 KB (3,487 words) - 14:35, 28 February 2024