Template
- ---
Copy the wiki markup below to your page to use as a template
- ---
Title of the device or system
Project developed by Mayank Moon
Abstract
- People spend hours in the scorching sun to make sure that they water there crop, and mostly done manually. By 3D printing the design mentioned in this page, it make sure that they can attach the water hose on the tube and crop can be watered.
Bill of Materials
- The part is just in one part, so only 3D printer PLA material is required.
- Youmagine Link Sprinkler Head: [1]
Tools needed
- MOST Delta RepRap or similar RepRap 3-D printer
- 3D printer PLA material
Skills and knowledge needed
- The project is really simple with just one part, so having good knowledge of printing is required.
Technical Specifications and Assembly Instructions
- Orientation for printing is very important, printing in this format ensure ease removal of support.
- Print time 4 hr.
- Demonstration video as shown
| Sprinkler demonstration video |
|---|
Common Problems and Solutions
- Kindly take care of orientation
Cost savings
- Low cost appropriate Technology
- Estimate your costs $0.89
- Find a commercial equivalent $7
- Calculate $6.11 savings and 85.71% savings
Benefited Internet Communities
References
- For example:[1]
- ↑ web page: Sprinkler Safety, DOE/GO-10095 (1995) Available: https://www.safety.com/sprinklers/#gref
.
See also
External links
- Youmagine Link [6]