Line 48: | Line 48: | ||
==Testing Results== | ==Testing Results== | ||
To test the durability of some selected materials, our group exposed them to the outside weather for three days, sprayed them with water at a high pressure for a minute, put them in the oven at a temperature of 110 ˚F for thirty minutes, and scratched them with a wire brush 100 times. The results of these tests helped to determine which materials were to be used as the | |||
==How to build== | ==How to build== | ||
==Discussion and next steps== | ==Discussion and next steps== |
Revision as of 02:23, 30 November 2011
Abstract
Through Engineering 215 Intro to Design at Humboldt State University, Team Skin for the Win was created to address a problem involving a client of Professor Lonny Graffman. This client is the Flock House founded by Mary Mattingly, who is a well known and respected artist in New York City. She is the founder of many projects other than the Flock House Project including the Waterpod Project [1] for which a previous Engineering 215 Intro to Design class were also participants.
- Project Formulation
- Problem Analysis and Literature Review
- Alternative Solutions
- Decision Process
- Specification of Final Solution
Background
Problem Analysis and Criteria
Criteria | Weight | Description |
---|---|---|
Safety | 10 | Protects inhabitants from natural elements |
Inspiration | 9 | Reuses commonly wasted materials |
Aesthetics | 8 | Visually appealing |
Cost | 8 | Less than $375 |
Durability | 7 | Should withstand New York weather conditions |
Description of final project
- Photos and descriptions
Design Cost
Design cost is measured in hours. The total hours spent on the creation of the Aluminum Awareness are 428 with the total being broken into respective segments as shown in Figure 2.
Testing Results
To test the durability of some selected materials, our group exposed them to the outside weather for three days, sprayed them with water at a high pressure for a minute, put them in the oven at a temperature of 110 ˚F for thirty minutes, and scratched them with a wire brush 100 times. The results of these tests helped to determine which materials were to be used as the