This is a device that clips into the heater vents for anyone who owns a car. For an example, this hanger can be used to dry out gloves or similar items after a day in the snow.
Bill of Materials
- PLA Filament
Tools needed
Razor blade to get it off the print bed if you have good adhesion.
Skills and knowledge needed
This device can be used by simply printing the part and then attaching it to the vent in car.
Technical Specifications and Assembly Instructions
FreeCad Files and STL Files for all Components are Located on YouMagine
Link Here for STL and FreeCAD Files
- Print out the necessary file (Car Heater-Vent Hanger)
- Install the part in your car's heater vent
- Hang any object that your heater vents can support.
- Assembly of Car Heater-Vent Hanger
-
Image 1
-
Image 2
-
Image 3
Common Problems and Solutions
- Modifications may be necessary for different vehicles with different sized vents.
Cost savings
Plastic Used in Printing =~ $0.11