This page lists all the current equipment available in the lab
Additive Manufacturing[edit | edit source]
Additive Manufacturing Technologies Diagram
SLA[edit | edit source]
Prusa SL1S Speed x2
Fused Filament Fabrication (FFF)[edit | edit source]
Fused Filament Fabrication (FFF) is a 3D printing process that builds objects layer-by-layer by extruding melted thermoplastic filament. Fused Deposition Modeling (FDM) is the trademarked term for this process when used in Stratasys' commercial systems.
Lulzbot TAZ pro[edit | edit source]
- Hotend - M175 v2 Hardened stainless steel (Bondtech)
- Filament diameter - 1.75mm
- Nozzle - 0.6mm changeable
- Flexible filament - YES
Lulzbot TAZ Workhorse[edit | edit source]
- Hotend - M175 v2 carbide plated copper (Bondtech)
- Filament diameter - 1.75mm
- Nozzle - 0.5mm changeable
- Flexible filament - YES
Lulzbot TAZ Workhorse[edit | edit source]
- Hotend - SE nickel plated copper (E3D)
- Filament diameter - 2.85mm
- Nozzle - 0.5mm changeable
- Flexible filament - YES
Lulzbot TAZ Workhorse #2[edit | edit source]
- Hotend - SE nickel plated copper (E3D)
- Filament diameter - 2.85mm
- Nozzle - 0.5mm changeable
- Flexible filament - YES
Lulzbot TAZ 6[edit | edit source]
- Hotend - Single extruder
- Filament diameter - 2.85mm
- Nozzle - 0.5mm changeable
- Flexible filament - NO
Lulzbot TAZ 6 #2[edit | edit source]
- Hotend - MOARstruder
- Filament diameter - 2.85mm
- Nozzle - 1.2mm
- Flexible filament - NO
Lulzbot TAZ 6 #2[edit | edit source]
- Hotend - Dual extruder v3
- Filament diameter - 2.85mm
- Nozzle - 0.5 | 0.5 (volcano)
- Flexible filament - YES (soluble supports)
Lulzbot sidekick 289[edit | edit source]
- Hotend - SL nickel plated copper ((E3D)
- Filament diameter - 2.85mm
- Nozzle - 0.25mm
- Flexible filament - YES
Prusa i3 MK3S & MK3S+ 0.8 nozzle[edit | edit source]
- Hotend - Prusa hotend
- Filament diameter - 1.75
- Nozzle - 0.8mm
- Flexible filament - YES
Prusa i3 MK3S & MK3S+[edit | edit source]
- Hotend - Prusa hotend
- Filament diameter - 1.75
- Nozzle - 0.4mm
- Flexible filament - YES
Prusa i3 MK3S & MK3S+[edit | edit source]
- Hotend - Prusa hotend
- Filament diameter - 1.75
- Nozzle - 0.4mm
- Flexible filament - YES
Prusa i3 MK3S & MK3S+ MMU2S[edit | edit source]
- Hotend - Prusa hotend
- Filament diameter - 1.75
- Nozzle - 0.4mm
- Flexible filament - YES (Multimaterial capability)
Prusa i3 MK3S+ with Passive Enclosure[edit | edit source]
- Hotend - e3D Revo hotend
- Filament diameter - 1.75mm
- Nozzle - 0.25mm, 0.4mm, 0.6mm, 0.8mm
- Flexible filament - YES
Instructions[edit | edit source]
Recommended slicers to use the printers
After installing the slicer, the printers and the respective hotends can be added.
There are presets available in all the slicers for the most of he materials used in the lab.
This category currently contains no pages or media.