Waterproofing 3-D prints from the makers
- epoxy coat after or purpose made 3DP coating-- add commercial versions here:
- thicker layers, more perimeters,solid, smooth chemically https://www.fabbaloo.com/blog/2017/10/19/waterproofing-your-3d-prints
- For chemical smoothing can use results from this paper for any type of 3DP material Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Wax- https://www.instructables.com/id/Using-Wax-to-Waterproof-3D-Prints/
- Purposefully overextrude - https://hackaday.com/2018/04/17/3d-printing-watertight-containers/
- Epoxy Clay or plumbers goop - https://nrqm.ca/2012/11/waterproofing-3d-prints-epoxy-cla/